Noob question

[WicktheWild]

I am running a i7 6700k at 4.7ghz and dual fe rtx 2070 super at 1935mhz all under a custom loop. According to hwmonitor everything is running at max and my loop temp says the same about 45c. But i am only showing 300k ppd, shouldnt this be more like 3mil ppd?

If im just a dummy you can say so i wont be offended just want to help research a bit in my free time and can afford the electric bill.

Chad

[Joe_H]

Welcome to the folding support forum.

Most often when the reported PPD is low, no passkey has been entered into the client. A large portion of the points come from the Quick Return Bonus (QRB), and that requires a passkey.

[WicktheWild]

Yeah i never entered the passkey

[kiore]

Yeah i never entered the passkey

So request a passkey, enter and complete 10 units with at least 80% success rate and you are away. With the system you describe this should be within a day easily.

[bollix47]

In case you need more info on passkeys:

https://apps.foldingathome.org/getpasskey

[Shirty]

Once the passkey is active your rig will be good for 2.6-3.2 million ppd

[WicktheWild]

Dont think i will fold anymore, shortly after it bsod my pc. And it couldnt find one of my gpus. Took me an hour to get everything back to normal. After i oced my rig i ran occt for a day with zero errors. It is (was) a very stable oc. Wondering if the internal case temp got to high for the mobo. My loop has a 360 rad on intake and a 240 and 120 on the out. Loop temp settled in at 46c.

[Joe_H]

That is up to you. However, OCCT is only a general test, and we have learned from years of reports that systems can be stable under such tests but not folding stable. Running the F@h client is a stress test that will show any weakness not shown by other tests. It would probably work fine with a bit lower OC.