Project: 783 (Run 6, Clone 91, Gen 0)

Moderators: Site Moderators, FAHC Science Team

Post Reply
iwegian
Posts: 12
Joined: Wed May 07, 2008 10:11 pm

Project: 783 (Run 6, Clone 91, Gen 0)

Post by iwegian »

I got this on a Linux 5.02 client some weeks ago. It shows unknown points in FAHmon. It has taken almost 3 hours per percent to do. It appears to need "Core required: FahCore_a0.exe" I wonder if it is some fluke.....but do not want to dump it as it was assigned to me. What are the points and deadline on this unit? FAHmon gets nothing on it.

thanks
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by toTOW »

It's not displayed on the psummary :(

We'll have to wait for an answer from Pande Group (the associated server might be down for maintenance ...).
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
rbrandman
Pande Group Member
Posts: 22
Joined: Wed May 14, 2008 4:11 pm

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by rbrandman »

Thanks for your post. I'll figure out the researcher in charge of this project and have them look into it.

Relly
VijayPande
Pande Group Member
Posts: 2058
Joined: Fri Nov 30, 2007 6:25 am
Location: Stanford

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by VijayPande »

Which server did you get it from? Could you post some logs?
iwegian
Posts: 12
Joined: Wed May 07, 2008 10:11 pm

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by iwegian »

Code: Select all

[15:08:59]   ... Done.
[15:08:59] - Shutting down core
[15:08:59] 
[15:08:59] Folding@home Core Shutdown: FINISHED_UNIT
[15:08:59] CoreStatus = 64 (100)
[15:08:59] Sending work to server


[15:08:59] + Attempting to send results
[15:09:04] + Results successfully sent
[15:09:04] Thank you for your contribution to Folding@Home.
[15:09:04] + Number of Units Completed: 535

[15:09:04] - Preparing to get new work unit...
[15:09:04] + Attempting to get work packet
[15:09:04] - Connecting to assignment server
[15:09:05] - Successful: assigned to (130.49.240.81).
[15:09:05] + News From Folding@Home: Welcome to Folding@Home
[15:09:05] Loaded queue successfully.
[15:09:05] + Could not connect to Work Server
[15:09:05] - Error: Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[15:09:14] + Attempting to get work packet
[15:09:14] - Connecting to assignment server
[15:09:14] - Successful: assigned to (130.49.240.81).
[15:09:14] + News From Folding@Home: Welcome to Folding@Home
[15:09:15] Loaded queue successfully.
[15:09:15] + Could not connect to Work Server
[15:09:15] - Error: Attempt #2  to get work failed, and no other work to do.
             Waiting before retry.
[15:09:39] + Attempting to get work packet
[15:09:39] - Connecting to assignment server
[15:09:41] - Successful: assigned to (130.49.240.81).
[15:09:41] + News From Folding@Home: Welcome to Folding@Home
[15:09:41] Loaded queue successfully.
[15:09:43] + Could not connect to Work Server
[15:09:43] - Error: Attempt #3  to get work failed, and no other work to do.
             Waiting before retry.
[15:10:09] + Attempting to get work packet
[15:10:09] - Connecting to assignment server
[15:10:10] - Successful: assigned to (130.49.240.81).
[15:10:10] + News From Folding@Home: Welcome to Folding@Home
[15:10:10] Loaded queue successfully.
[15:10:10] + Could not connect to Work Server
[15:10:10] - Error: Attempt #4  to get work failed, and no other work to do.
             Waiting before retry.
[15:10:57] + Attempting to get work packet
[15:10:57] - Connecting to assignment server
[15:10:58] - Successful: assigned to (130.49.240.81).
[15:10:58] + News From Folding@Home: Welcome to Folding@Home
[15:10:58] Loaded queue successfully.
[15:10:58] + Could not connect to Work Server
[15:10:58] - Error: Attempt #5  to get work failed, and no other work to do.
             Waiting before retry.
[15:12:20] + Attempting to get work packet
[15:12:20] - Connecting to assignment server
[15:12:21] - Successful: assigned to (130.49.240.81).
[15:12:21] + News From Folding@Home: Welcome to Folding@Home
[15:12:21] Loaded queue successfully.
[15:12:21] + Could not connect to Work Server
[15:12:21] - Error: Attempt #6  to get work failed, and no other work to do.
             Waiting before retry.
[15:15:04] + Attempting to get work packet
[15:15:04] - Connecting to assignment server
[15:15:04] - Successful: assigned to (171.64.122.88).
[15:15:04] + News From Folding@Home: Welcome to Folding@Home
[15:15:05] Loaded queue successfully.
[15:15:05] + Could not connect to Work Server
[15:15:05] - Error: Attempt #7  to get work failed, and no other work to do.
             Waiting before retry.
[15:20:29] + Attempting to get work packet
[15:20:29] - Connecting to assignment server
[15:20:30] - Successful: assigned to (171.64.122.88).
[15:20:30] + News From Folding@Home: Welcome to Folding@Home
[15:20:30] Loaded queue successfully.
[15:20:30] + Could not connect to Work Server
[15:20:30] - Error: Attempt #8  to get work failed, and no other work to do.
             Waiting before retry.
[15:31:20] + Attempting to get work packet
[15:31:20] - Connecting to assignment server
[15:31:20] - Successful: assigned to (130.49.240.81).
[15:31:20] + News From Folding@Home: Welcome to Folding@Home
[15:31:20] Loaded queue successfully.
[15:31:20] + Could not connect to Work Server
[15:31:20] - Error: Attempt #9  to get work failed, and no other work to do.
             Waiting before retry.
[15:52:54] + Attempting to get work packet
[15:52:54] - Connecting to assignment server
[15:52:54] - Successful: assigned to (171.64.122.83).
[15:52:54] + News From Folding@Home: Welcome to Folding@Home
[15:52:54] Loaded queue successfully.
[15:52:54] - Couldn't send HTTP request to server
[15:52:54]   (Got status 503)
[15:52:54] + Could not connect to Work Server
[15:52:54] - Error: Attempt #10  to get work failed, and no other work to do.
             Waiting before retry.
[16:35:45] + Attempting to get work packet
[16:35:45] - Connecting to assignment server
[16:35:45] - Successful: assigned to (171.64.122.138).
[16:35:45] + News From Folding@Home: Welcome to Folding@Home
[16:35:45] Loaded queue successfully.
[16:35:49] + Closed connections
[16:35:49] 
[16:35:49] + Processing work unit
[16:35:49] Core required: FahCore_a0.exe
[16:35:49] Core found.
[16:35:49] Working on Unit 09 [July 4 16:35:49]
[16:35:49] + Working ...
[16:35:49] 
[16:35:49] *------------------------------*
[16:35:49] Folding@Home Gromacs 3.3 Core
[16:35:49] Version 1.92 (April 17. 2007)
[16:35:49] 
[16:35:49] Preparing to commence simulation
[16:35:49] - Looking at optimizations...
[16:35:49] - Created dyn
[16:35:49] - Files status OK
[16:35:50] - Expanded 961100 -> 6252409 (decompressed 650.5 percent)
[16:35:50] - Starting from initial work packet
[16:35:50] 
[16:35:50] Project: 783 (Run 6, Clone 91, Gen 0)
[16:35:50] 
[16:35:50] Assembly optimizations on if available.
[16:35:50] Entering M.D.
[16:35:57] Protein: Mini chaperonin
[16:35:57] Writing local files
[16:35:57] Extra 3DNow boost OK.
[16:35:57] Extra SSE boost OK.
[16:35:58] Writing local files
[16:35:58] Completed 0 out of 500000 steps  (0 percent)
[18:06:49] Writing local files
[18:06:49] Completed 5000 out of 500000 steps  (1 percent)
[19:34:18] Writing local files
[19:34:19] Completed 10000 out of 500000 steps  (2 percent)
[21:02:15] Writing local files
[21:02:15] Completed 15000 out of 500000 steps  (3 percent)
[22:29:58] Writing local files
Sorry, don't know how to get this into a smaller format. This is the beginning of the unit.....it is now up to about 96% done. It is my trusty old main computer now running Fedora Core 4 on a dual socket A Athlon MP Asus motherboard.

thanks
ppetrone
Pande Group Member
Posts: 115
Joined: Wed Dec 12, 2007 6:20 pm
Location: Stanford
Contact:

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by ppetrone »

Thanks for reporting this. I will alert Lillian about this issue.

Paula.
Baowoulf
Posts: 208
Joined: Wed Dec 12, 2007 8:44 pm
Hardware configuration: Pentium 4 2.8 GHz, 512MB DDR Ram, 128MB Radeon 9800, Creative Soundblaster Audigy 4 Pro
Location: Jupiter 6
Contact:

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by Baowoulf »

iwegian just use the code and /code in brackets [] like you would do if you were going to display a picture hosted on an online website like imageshack or photobucket. I think that's what you wanted to know.

Code: Select all

 It will end up looking like this 
endrik
Posts: 34
Joined: Mon Dec 10, 2007 10:41 pm
Location: Wroclaw, Poland
Contact:

Re: Project: 783 (Run 6, Clone 91, Gen 0)

Post by endrik »

ppetrone wrote:Thanks for reporting this. I will alert Lillian about this issue.
Looks like it did not help much...

Code: Select all

[11:01:46] Folding@Home Gromacs 3.3 Core
[11:01:46] Version 1.92 (April 17. 2007)
[11:01:46]
[11:01:46] Preparing to commence simulation
[11:01:46] - Looking at optimizations...
[11:01:46] - Files status OK
[11:01:47] - Expanded 961050 -> 6252409 (decompressed 650.5 percent)
[11:01:48]
[11:01:48] Project: 784 (Run 8, Clone 38, Gen 0)
[11:01:48]
[11:01:48] Assembly optimizations on if available.
[11:01:48] Entering M.D.
[11:02:09] (Starting from checkpoint)
[11:02:09] Protein: Mini chaperonin
[11:02:09] Writing local files
[11:02:09] Completed 485527 out of 500000 steps  (97%)
[11:02:10] Extra 3DNow boost OK.
[11:02:10] Extra SSE boost OK.
[13:05:52] Writing local files
[13:05:53] Completed 490000 out of 500000 steps  (98 percent)
[14:47:28] Writing local files
[14:47:28] Completed 495000 out of 500000 steps  (99 percent)
[16:28:28] Writing local files
[16:28:28] Completed 500000 out of 500000 steps  (100 percent)
[16:28:28] Writing final coordinates.
[16:28:29] Past main M.D. loop
[16:29:29]
[16:29:29] Finished Work Unit:
[16:29:29] - Reading up to 1043160 from "work/wudata_04.arc": Read 1043160
[16:29:29] - Reading up to 3548132 from "work/wudata_04.xtc": Read 3548132
[16:29:29] goefile size: 0
[16:29:29] logfile size: 541599
[16:29:29] Leaving Run
[16:29:31] - Writing 5149523 bytes of core data to disk...
[16:29:34] Done: 5149011 -> 4517367 (compressed to 87.7 percent)
[16:29:34]   ... Done.
[16:29:36] - Shutting down core
[16:29:36]
[16:29:36] Folding@home Core Shutdown: FINISHED_UNIT
[16:29:37] CoreStatus = 64 (100)
[16:29:37] Sending work to server
[16:29:37] + Attempting to send results
[16:32:46] - Couldn't send HTTP request to server
[16:32:46] + Could not connect to Work Server (results)
[16:32:46]     (171.64.122.138:8080)
[16:32:46] - Error: Could not transmit unit 04 (completed July 26) to work server.
[16:32:46]   Keeping unit 04 in queue.
[16:32:46] + Attempting to send results
[16:35:55] - Couldn't send HTTP request to server
[16:35:55] + Could not connect to Work Server (results)
[16:35:55]     (171.64.122.138:8080)
[16:35:55] - Error: Could not transmit unit 04 (completed July 26) to work server.
Serverstats of Sun Jul 27 14:15:10 PDT 2008 confirms:
171.64.122.138 VSP71 - full DOWN

Any hope in foreseeable future ?
yours,
endrik

*Bookworms will rule the world
(after we finish the background reading).
Post Reply