Is there any way to force the use of a GPU core other than 22? Can I select some project other than Virus 19 and get a different core?
I am trying to determine if I have problems with any other core.
force a core other than 22
Moderators: Site Moderators, FAHC Science Team
Re: force a core other than 22
The project determines which core is required, so it's out of your control.
All GPU projects for COVID-19 currently require FahCore_22.
You can select a preference other than COVID-19, I think there's still some FahCore_21 out there that hand out WUs, but changing preference doesn't guarantee you'll get any of those.
All GPU projects for COVID-19 currently require FahCore_22.
You can select a preference other than COVID-19, I think there's still some FahCore_21 out there that hand out WUs, but changing preference doesn't guarantee you'll get any of those.
CPU: Ryzen 9 3900X (1x21 CPUs) ~ GPU: nVidia GeForce GTX 1660 Super (Asus)
-
- Posts: 2522
- Joined: Mon Feb 16, 2009 4:12 am
- Location: Greenwood MS USA
Re: force a core other than 22
Core_22 is a GPU core. Some older GPU projects use Core_21, but with the priority on COVID-19, they are currently rare. (all GPU COVID-19 projects are Core_22)
Core_a7 is the CPU core.
Core_a7 is the CPU core.
Last edited by JimboPalmer on Sun Jun 21, 2020 4:50 pm, edited 1 time in total.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
-
- Posts: 1996
- Joined: Sun Mar 22, 2020 5:52 pm
- Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21 - Location: UK
Re: force a core other than 22
To the best of my knowledge no you can't force/choose Projects/WUs/Core … You can state a preference for the type of Projects but that is about it … What problems do you think you are having with Core22? - and are these with 0.0.10 or a previous version? … I ask as there are some current Projects that are very variable in a number of ways - but issues are not necessarily due to the core but the experimental type of projects - so it may not be your kit/setup having issues and just be the impact some of the projects are having at the moment.
I am occasionally picking up Core21s as at least one of the research groups is using that still on fairly new projects.
I am occasionally picking up Core21s as at least one of the research groups is using that still on fairly new projects.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
-
- Posts: 127
- Joined: Tue Mar 24, 2020 12:47 pm
Re: force a core other than 22
My issues are documented elsewhere viewtopic.php?f=81&t=35482
I am just trying to narrow things down. As stated in the above link, it is frustrating to see a 5 hour run say it is finished, but not able to upload because of an unknown error.
Nobody else seems to have this problem, so I am doing as much investigation as I can. I am running world community grid boinc virus besides this (I give CPU to WCG and GPU to FAH). I have an i7 with 4 cores, 8 threads. I only allocate 4 cores to WCG, and I always have some idle CPU cycles, so I don't think this is the issue. I could stop WCG for a while and see if that helps.
I did switch my project preference to cancer in hopes of getting a core 21 project, but I received a virus 19 project. I know what project you select you may not get. I guess I just confirmed that.
I also tried bumping up the priority of my FAH via the advanced controls. It did not help.
I am open to any suggestions.
I am just trying to narrow things down. As stated in the above link, it is frustrating to see a 5 hour run say it is finished, but not able to upload because of an unknown error.
Nobody else seems to have this problem, so I am doing as much investigation as I can. I am running world community grid boinc virus besides this (I give CPU to WCG and GPU to FAH). I have an i7 with 4 cores, 8 threads. I only allocate 4 cores to WCG, and I always have some idle CPU cycles, so I don't think this is the issue. I could stop WCG for a while and see if that helps.
I did switch my project preference to cancer in hopes of getting a core 21 project, but I received a virus 19 project. I know what project you select you may not get. I guess I just confirmed that.
I also tried bumping up the priority of my FAH via the advanced controls. It did not help.
I am open to any suggestions.
Re: force a core other than 22
Probably P169xx. That was the last time I got a FAHCore_21. I think there is at least one other project still running core_21.Neil-B wrote:I am occasionally picking up Core21s as at least one of the research groups is using that still on fairly new projects.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 1996
- Joined: Sun Mar 22, 2020 5:52 pm
- Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21 - Location: UK
Re: force a core other than 22
So looks like leaving your preference to cancer probably optimises your chances of getting a Core21 ... I won't try to help re the problems since they are being covered in the other thread.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)