Catalyst 14.12 Omega & 7970

It seems that a lot of GPU problems revolve around specific versions of drivers. Though AMD has their own support structure, you can often learn from information reported by others who fold.

Moderators: Site Moderators, FAHC Science Team

DarkFoss
Posts: 103
Joined: Fri Apr 16, 2010 11:43 pm
Hardware configuration: AMD 5800X3D Asus ROG Strix X570-E Gaming WiFi II bios 5003 G-Skill TridentZ Neo 3600mhz Asrock Tachi RX 7900XTX Corsair rm850x psu Asus PG32UQXR EK Elite 360 D-rgb aio Win 11pro/Kubuntu 22.04.4 LTS UPS BX1500G
Location: Galifrey

Catalyst 14.12 Omega & 7970

Post by DarkFoss »

Just a heads up about the latest Catalyst 14.12 Omega and older cards.

I have 2 7970's Windows 8.1x64 and the last day and a half I tried the 14.12's. They were roughly 4 minutes slower on the 1300 and 1301 Wu's average TPF was 10:45 or a bit higher,definitely a bug/regression with the OpenCl 2.0 update and my 7970's and or FAH.

I'm back on the 14.9.2 betas Folding is back to normal TPF 7:30 on WU 13000 (391, 1, 35) and TPF of 7:40 on WU 13001 (202, 0, 115).

If you have a newer R series you *may* be ok. I just know for me these and the previous 14.11 betas were a no go not for folding but random bsod's if watching movies in Firefox with Flash.

*Edit* I should note the 10466's and 9201's seems to be unaffected after looking through the logs roughly a TPF of 8:29 and 3;30 respectively.
Last edited by DarkFoss on Fri Dec 12, 2014 3:42 am, edited 1 time in total.
Image
cvsi3
Posts: 3
Joined: Sun May 18, 2008 3:59 am
Hardware configuration: Intel 2600K @ 4.7Ghz - Diamond 7970 Ref 1225/1600 - G.Skill 2133Mhz 9-9-9-21-1T. Corsair AX1200 PSU. CPU and GPU are watercooled.
Location: Lexington Park, MD

Re: Catalyst 14.12 Omega & 7970

Post by cvsi3 »

I run a 7970 and 280x, which are technically the same cards, but I experience the same thing, went from 6:26 TPF to just under 10 minutes on 13000 and 13001 work units.
DarkFoss
Posts: 103
Joined: Fri Apr 16, 2010 11:43 pm
Hardware configuration: AMD 5800X3D Asus ROG Strix X570-E Gaming WiFi II bios 5003 G-Skill TridentZ Neo 3600mhz Asrock Tachi RX 7900XTX Corsair rm850x psu Asus PG32UQXR EK Elite 360 D-rgb aio Win 11pro/Kubuntu 22.04.4 LTS UPS BX1500G
Location: Galifrey

Re: Catalyst 14.12 Omega & 7970

Post by DarkFoss »

Thanks for the confirmation always good to know it's not just my system. :)
Image
plimogz
Posts: 3
Joined: Tue Dec 02, 2014 4:15 am

Re: Catalyst 14.12 Omega & 7970

Post by plimogz »

I just installed the 14.12 Omegas on my dual R9 290 Win7 (64bit) machine a couple of hours ago, and so far I'm not seeing any regression VS 14.9. This is based on a 9201 WU and a 13000 WU.

Though I guess I won't be installing the new driver on my 7950 machine.

Thanks for the heads-up!
JimF
Posts: 651
Joined: Thu Jan 21, 2010 2:03 pm

Re: Catalyst 14.12 Omega & 7970

Post by JimF »

Same on the HD 7790 and HD 7870. The 14.12 drivers are about 5% slower than the 14.9 drivers, which are the best for those cards on Folding (Win7 64-bit).
jrweiss
Posts: 704
Joined: Tue Dec 04, 2007 6:56 am
Hardware configuration: Ryzen 7 5700G, 22.40.46 VGA driver; 32GB G-Skill Trident DDR4-3200; Samsung 860EVO 1TB Boot SSD; VelociRaptor 1TB; MSI GTX 1050ti, 551.23 studio driver; BeQuiet FM 550 PSU; Lian Li PC-9F; Win11Pro-64, F@H 8.3.5.

[Suspended] Ryzen 7 3700X, MSI X570MPG, 32GB G-Skill Trident Z DDR4-3600; Corsair MP600 M.2 PCIe Gen4 Boot, Samsung 840EVO-250 SSDs; VelociRaptor 1TB, Raptor 150; MSI GTX 1050ti, 526.98 driver; Kingwin Stryker 500 PSU; Lian Li PC-K7B. Win10Pro-64, F@H 8.3.5.
Location: @Home
Contact:

Re: Catalyst 14.12 Omega & 7970

Post by jrweiss »

Updated from 14.4 to 14.9. On my 7750, TPF went from 33:55 to 32:32. Will upgrade the second system tomorrow.
Ryzen 7 5700G, 22.40.46 VGA driver; MSI GTX 1050ti, 551.23 studio driver
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
Dr.G
Posts: 20
Joined: Sat Apr 26, 2014 7:11 am

Re: Catalyst 14.12 Omega & 7970

Post by Dr.G »

Thanks for the thread @DarkFoss

I was also interested / excited to see what effect Catalyst 14.12 Omega would have on folding PPD.
I measured perfomance using FahBench
14.9 : 26 ns/day (explicit), 76 ns/day (implicit)
14.12 : 16 ns/day (explicit), 51 ns/day (implicit)
So sadly quite BIG drop in folding performance using the new Omega drivers. :e(
(This is my test-bench which only has an old 7850 with Win 7 home - not tried on my folding rigs with dual R2 290X's or dual 7970's )

Anyone else had any other experience?
foldy
Posts: 2040
Joined: Sat Dec 01, 2012 3:43 pm
Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441

Re: Catalyst 14.12 Omega & 7970

Post by foldy »

I tested FAHbench with my HD7950 (or R9 280) @900Mhz
14.9.
Explicit 35
Implicit 122

14.12.
Explicit 35
Implicit 111

So this is a 10% performance decrease, but not a big thing.
DarkFoss
Posts: 103
Joined: Fri Apr 16, 2010 11:43 pm
Hardware configuration: AMD 5800X3D Asus ROG Strix X570-E Gaming WiFi II bios 5003 G-Skill TridentZ Neo 3600mhz Asrock Tachi RX 7900XTX Corsair rm850x psu Asus PG32UQXR EK Elite 360 D-rgb aio Win 11pro/Kubuntu 22.04.4 LTS UPS BX1500G
Location: Galifrey

Re: Catalyst 14.12 Omega & 7970

Post by DarkFoss »

@DrG, Your welcome.

@Foldy I respectfully disagree the performance drop on my HD7970's is a big deal. In the time it takes to render 2 frames with the 14.12 driver I could have rendered a 3rd and then some with the 14.9. , that adds 5 to 6 hours of time it takes to complete the WU. It also delays the science since the next one in order could have been issued that much sooner , not to mention the wasted electricity of folding that same WU when I could be 5 hours into the next WU.
Image
foldy
Posts: 2040
Joined: Sat Dec 01, 2012 3:43 pm
Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441

Re: Catalyst 14.12 Omega & 7970

Post by foldy »

@DarkFoss I meant not a big thing on my HD 7950 :-)
But i also checked my logfiles for the 13000 and 13001 WUs
and see no difference between 14.9 and 14.12
With my HD 7950 both take 10min per %.

I mean something like that in the logfile:
18:44:50:WU00:FS01:0x17:Completed 4100000 out of 5000000 steps (82%)
18:54:45:WU00:FS01:0x17:Completed 4150000 out of 5000000 steps (83%)

Did you check the logfile time between checkpoint % logs
or are you only referring to TPF?

Maybe the TPF display is not correct?
DarkFoss
Posts: 103
Joined: Fri Apr 16, 2010 11:43 pm
Hardware configuration: AMD 5800X3D Asus ROG Strix X570-E Gaming WiFi II bios 5003 G-Skill TridentZ Neo 3600mhz Asrock Tachi RX 7900XTX Corsair rm850x psu Asus PG32UQXR EK Elite 360 D-rgb aio Win 11pro/Kubuntu 22.04.4 LTS UPS BX1500G
Location: Galifrey

Re: Catalyst 14.12 Omega & 7970

Post by DarkFoss »

Hi foldy no worries, I misread I guess :lol:
I checked the logs with the 14.12 :

Code: Select all

Project: 13001 (Run 379, Clone 2, Gen 84)
04:31:50:WU00:FS00:0x17:Completed 3300000 out of 5000000 steps (66%)
04:42:10:WU00:FS00:0x17:Completed 3350000 out of 5000000 steps (67%)
04:52:46:WU00:FS00:0x17:Completed 3400000 out of 5000000 steps (68%)
05:03:12:WU00:FS00:0x17:Completed 3450000 out of 5000000 steps (69%)

Project: 13000 (Run 632, Clone 0, Gen 46)
04:35:38:WU01:FS01:0x17:Completed 50000 out of 5000000 steps (1%)
04:49:25:WU01:FS01:0x17:Completed 100000 out of 5000000 steps (2%)
05:03:31:WU01:FS01:0x17:Completed 150000 out of 5000000 steps (3%)
05:17:21:WU01:FS01:0x17:Completed 200000 out of 5000000 steps (4%)
With the 14.9.2 beta

Code: Select all

Project: 13001 (Run 351, Clone 3, Gen 79)
Project: 13001 (Run 522, Clone 7, Gen 72)
22:38:38:WU01:FS01:0x17:Completed 650000 out of 5000000 steps (13%)
22:42:28:WU00:FS00:0x17:Completed 1800000 out of 5000000 steps (36%)
22:46:19:WU01:FS01:0x17:Completed 700000 out of 5000000 steps (14%)
22:50:09:WU00:FS00:0x17:Completed 1850000 out of 5000000 steps (37%)
22:54:00:WU01:FS01:0x17:Completed 750000 out of 5000000 steps (15%)
22:58:05:WU00:FS00:0x17:Completed 1900000 out of 5000000 steps (38%)
Image
foldy
Posts: 2040
Joined: Sat Dec 01, 2012 3:43 pm
Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441

Re: Catalyst 14.12 Omega & 7970

Post by foldy »

I found a workaround for the problem:
You can install the 14.12 driver and still use the 14.9 OpenCl runtime with FAH. 8-)
Just copy files OpenCL.dll and amdocl.dll from 14.9 driver to FAH core folder.
This will hide the slower 14.12 OpenCL 2.0 runtime and FahCore will use the faster 14.9. OpenCL 1.2 runtime.

1) Copy amdocl.dll and amd_opencl32.dll
from source folder
C:\AMD\AMD-Catalyst-14-9-win7-win8.1-64Bit-dd-ccc-whql\Packages\Drivers\Display\WB6A_INF\B176041
to target folder:
C:\ProgramData\FAHClient\cores\web.stanford.edu\~pande\Win32\AMD64\ATI\R600\Core_17.fah
2) Rename amd_opencl32.dll to OpenCL.dll
3) Pause and Resume the slot or FAH client.

:!: If you want to use this mod then don't forget that you have to redo it when FahCore changes,
and if you install an even newer driver in future e.g. AMD 15.3 then you have to remove the extra files
if you want to use the future AMD 15.3 OpenCL runtime.

@DarkFoss: I dont know if you are happy with 14.9. now, but if you want 14.12. you can try my runtime mod.
@FAHcore developers: Do you file a performance issue to AMD or do you adapt future FAHcore18 to not have this issue :?:
Last edited by foldy on Sun Dec 21, 2014 3:41 pm, edited 1 time in total.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Catalyst 14.12 Omega & 7970

Post by 7im »

Comment directly to developers on the /r/foldingathome reddit page.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Catalyst 14.12 Omega & 7970

Post by toTOW »

I didn't seen any performance change on my R9 290X with 14.12 drivers. I think it is even a little bit faster than 14.9 :D

Now it would be interesting to see how fahcore18 behave in these conditions ... the performance issue might be solved or at least improved.
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
MaddMutt
Posts: 7
Joined: Sat Sep 29, 2012 6:52 am
Hardware configuration: Gigabyte MA-790FXT(a) UD5
AMD P-II X6 1100t @3.7
2x Sapphire HD-6950 2Gb Toxic Edition Unlocked to 1536 Shaders
12Gb DDR-3 1600 Corsair
Seagate 500Gb Hard Drive
Location: Kodak, Tn

Re: Catalyst 14.12 Omega & 7970

Post by MaddMutt »

Here are screen shoots to show the difference in the 14.9 and 14.12. Picture #1 was taken while running 14.12 Driver. Picture #2 was taken after doing a DDU and installing 14.9 to finish.

SORRY NO PICTURE UPLOAD.

Long Story Sort : Pic#1 has my ASUS R9-280x TOP (my best folder OCed) running @ 9:26 TPF on WU 13000
Pic#2 has my ASUS R9-280x TOP (my best folder OCed) running @ 6:49 TPF on WU 13000

To me, this is a BIG JUMP IN PERFORMANCE :D This also means that the 14.12 Drivers are crap for FAH
KOREAN WAR: When asked why Major General Oliver P. Smith's 1st Marine Division was retreating after being surrounded by 10 Chinese Division's

HE REPLIED: "Retreat, hell! We're not retreating, we're just advancing in a different direction."
Post Reply