10138/10139/10140 EUE

Moderators: Site Moderators, FAHC Science Team

wrinvert
Posts: 16
Joined: Sat Oct 22, 2011 8:24 am

10138/10139/10140 EUE

Post by wrinvert »

all three wus give me early end unit on any smp setting above 8/12cores.

Code: Select all

14:46:45:WU03:FS00:Connecting to assign3.stanford.edu:8080
14:46:45:WU03:FS00:News: Welcome to Folding@Home
14:46:45:WU03:FS00:Assigned to work server 171.64.65.75
14:46:45:WU03:FS00:Requesting new work unit for slot 00: RUNNING smp:10 from 171.64.65.75
14:46:45:WU03:FS00:Connecting to 171.64.65.75:8080
14:46:46:WU03:FS00:Downloading 958.50KiB
14:46:49:WU03:FS00:Download complete
14:46:49:WU03:FS00:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:10139 run:5 clone:4 gen:11 core:0xa3 unit:0x000000110a3b1e6f51474a6b15762c5e
14:53:00:WU03:FS00:Starting
14:53:00:WU03:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 03 -suffix 01 -version 702 -lifeline 6548 -checkpoint 15 -np 10
14:53:00:WU03:FS00:Started FahCore on PID 3956
14:53:00:WU03:FS00:Core PID:5964
14:53:00:WU03:FS00:FahCore 0xa3 started
14:53:01:WU03:FS00:0xa3:
14:53:01:WU03:FS00:0xa3:*------------------------------*
14:53:01:WU03:FS00:0xa3:Folding@Home Gromacs SMP Core
14:53:01:WU03:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
14:53:01:WU03:FS00:0xa3:
14:53:01:WU03:FS00:0xa3:Preparing to commence simulation
14:53:01:WU03:FS00:0xa3:- Looking at optimizations...
14:53:01:WU03:FS00:0xa3:- Created dyn
14:53:01:WU03:FS00:0xa3:- Files status OK
14:53:01:WU03:FS00:0xa3:- Expanded 980995 -> 2031392 (decompressed 207.0 percent)
14:53:01:WU03:FS00:0xa3:Called DecompressByteArray: compressed_data_size=980995 data_size=2031392, decompressed_data_size=2031392 diff=0
14:53:01:WU03:FS00:0xa3:- Digital signature verified
14:53:01:WU03:FS00:0xa3:
14:53:01:WU03:FS00:0xa3:Project: 10139 (Run 5, Clone 4, Gen 11)
14:53:01:WU03:FS00:0xa3:
14:53:01:WU03:FS00:0xa3:Assembly optimizations on if available.
14:53:01:WU03:FS00:0xa3:Entering M.D.
14:53:07:WU03:FS00:0xa3:Mapping NT from 10 to 10 
14:53:07:WU03:FS00:0xa3:mdrun returned 255
14:53:07:WU03:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
14:53:07:WU03:FS00:0xa3:Work fraction=0.0000 steps=2000000.
14:53:11:WU03:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
14:53:11:WU03:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
14:53:11:WU03:FS00:0xa3:- Writing 641 bytes of core data to disk...
14:53:11:WU03:FS00:0xa3:Done: 129 -> 145 (compressed to 112.4 percent)
14:53:11:WU03:FS00:0xa3:  ... Done.
14:53:15:WU03:FS00:0xa3:
14:53:15:WU03:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
14:53:15:WARNING:WU03:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:53:15:WU03:FS00:Sending unit results: id:03 state:SEND error:FAULTY project:10139 run:5 clone:4 gen:11 core:0xa3 unit:0x000000110a3b1e6f51474a6b15762c5e
14:53:16:WU03:FS00:Uploading 657B to 171.64.65.75
14:53:16:WU03:FS00:Connecting to 171.64.65.75:8080
14:53:16:WU03:FS00:Upload complete
14:53:16:WU03:FS00:Server responded WORK_ACK (400)
14:53:16:WU03:FS00:Cleaning up
14:53:36:WU03:FS00:Connecting to assign3.stanford.edu:8080
14:53:36:WU03:FS00:News: Welcome to Folding@Home
14:53:36:WU03:FS00:Assigned to work server 171.64.65.75
14:53:36:WU03:FS00:Requesting new work unit for slot 00: READY smp:10 from 171.64.65.75
14:53:36:WU03:FS00:Connecting to 171.64.65.75:8080
14:53:37:WU03:FS00:Downloading 955.77KiB
14:53:41:WU03:FS00:Download complete
14:53:41:WU03:FS00:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:10139 run:58 clone:2 gen:4 core:0xa3 unit:0x0000000b0a3b1e6f51474b4327e36e2f
14:53:41:WU03:FS00:Starting
14:53:41:WU03:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 03 -suffix 01 -version 702 -lifeline 6548 -checkpoint 15 -np 10
14:53:41:WU03:FS00:Started FahCore on PID 1108
14:53:41:WU03:FS00:Core PID:3236
14:53:41:WU03:FS00:FahCore 0xa3 started
14:53:41:WU03:FS00:0xa3:
14:53:41:WU03:FS00:0xa3:*------------------------------*
14:53:41:WU03:FS00:0xa3:Folding@Home Gromacs SMP Core
14:53:41:WU03:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
14:53:41:WU03:FS00:0xa3:
14:53:41:WU03:FS00:0xa3:Preparing to commence simulation
14:53:41:WU03:FS00:0xa3:- Looking at optimizations...
14:53:41:WU03:FS00:0xa3:- Created dyn
14:53:41:WU03:FS00:0xa3:- Files status OK
14:53:41:WU03:FS00:0xa3:- Expanded 978198 -> 2031392 (decompressed 207.6 percent)
14:53:41:WU03:FS00:0xa3:Called DecompressByteArray: compressed_data_size=978198 data_size=2031392, decompressed_data_size=2031392 diff=0
14:53:41:WU03:FS00:0xa3:- Digital signature verified
14:53:41:WU03:FS00:0xa3:
14:53:41:WU03:FS00:0xa3:Project: 10139 (Run 58, Clone 2, Gen 4)
14:53:41:WU03:FS00:0xa3:
14:53:41:WU03:FS00:0xa3:Assembly optimizations on if available.
14:53:41:WU03:FS00:0xa3:Entering M.D.
14:53:47:WU03:FS00:0xa3:Mapping NT from 10 to 10 
14:53:47:WU03:FS00:0xa3:mdrun returned 255
14:53:47:WU03:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
14:53:47:WU03:FS00:0xa3:Work fraction=0.0000 steps=2000000.
14:53:51:WU03:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
14:53:51:WU03:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
14:53:51:WU03:FS00:0xa3:- Writing 641 bytes of core data to disk...
14:53:51:WU03:FS00:0xa3:Done: 129 -> 145 (compressed to 112.4 percent)
14:53:51:WU03:FS00:0xa3:  ... Done.
14:53:56:WU03:FS00:0xa3:
14:53:56:WU03:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
14:53:56:WARNING:WU03:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:53:56:WU03:FS00:Sending unit results: id:03 state:SEND error:FAULTY project:10139 run:58 clone:2 gen:4 core:0xa3 unit:0x0000000b0a3b1e6f51474b4327e36e2f
14:53:56:WU03:FS00:Uploading 657B to 171.64.65.75
14:53:56:WU03:FS00:Connecting to 171.64.65.75:8080
14:53:57:WU03:FS00:Upload complete
14:53:57:WU03:FS00:Server responded WORK_ACK (400)
14:53:57:WU03:FS00:Cleaning up
14:54:17:WU03:FS00:Connecting to assign3.stanford.edu:8080
14:54:17:WU03:FS00:News: Welcome to Folding@Home
14:54:17:WU03:FS00:Assigned to work server 171.64.65.75
14:54:17:WU03:FS00:Requesting new work unit for slot 00: READY smp:10 from 171.64.65.75
14:54:17:WU03:FS00:Connecting to 171.64.65.75:8080
14:54:18:WU03:FS00:Downloading 962.27KiB
14:54:21:WU03:FS00:Download complete
14:54:21:WU03:FS00:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:10138 run:38 clone:2 gen:8 core:0xa3 unit:0x0000000c0a3b1e6f51474958c29e5210
14:54:21:WU03:FS00:Starting
14:54:21:WU03:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 03 -suffix 01 -version 702 -lifeline 6548 -checkpoint 15 -np 10
14:54:21:WU03:FS00:Started FahCore on PID 7608
14:54:21:WU03:FS00:Core PID:5224
14:54:21:WU03:FS00:FahCore 0xa3 started
14:54:22:WU03:FS00:0xa3:
14:54:22:WU03:FS00:0xa3:*------------------------------*
14:54:22:WU03:FS00:0xa3:Folding@Home Gromacs SMP Core
14:54:22:WU03:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
14:54:22:WU03:FS00:0xa3:
14:54:22:WU03:FS00:0xa3:Preparing to commence simulation
14:54:22:WU03:FS00:0xa3:- Looking at optimizations...
14:54:22:WU03:FS00:0xa3:- Created dyn
14:54:22:WU03:FS00:0xa3:- Files status OK
14:54:22:WU03:FS00:0xa3:- Expanded 984856 -> 2035048 (decompressed 206.6 percent)
14:54:22:WU03:FS00:0xa3:Called DecompressByteArray: compressed_data_size=984856 data_size=2035048, decompressed_data_size=2035048 diff=0
14:54:22:WU03:FS00:0xa3:- Digital signature verified
14:54:22:WU03:FS00:0xa3:
14:54:22:WU03:FS00:0xa3:Project: 10138 (Run 38, Clone 2, Gen 8)
14:54:22:WU03:FS00:0xa3:
14:54:22:WU03:FS00:0xa3:Assembly optimizations on if available.
14:54:22:WU03:FS00:0xa3:Entering M.D.
14:54:28:WU03:FS00:0xa3:Mapping NT from 10 to 10 
14:54:28:WU03:FS00:0xa3:mdrun returned 255
14:54:28:WU03:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
14:54:28:WU03:FS00:0xa3:Work fraction=0.0000 steps=2000000.
14:54:32:WU03:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
14:54:32:WU03:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
14:54:32:WU03:FS00:0xa3:- Writing 641 bytes of core data to disk...
14:54:32:WU03:FS00:0xa3:Done: 129 -> 145 (compressed to 112.4 percent)
14:54:32:WU03:FS00:0xa3:  ... Done.
14:54:36:WU03:FS00:0xa3:
14:54:36:WU03:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
14:54:37:WARNING:WU03:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:54:37:WU03:FS00:Sending unit results: id:03 state:SEND error:FAULTY project:10138 run:38 clone:2 gen:8 core:0xa3 unit:0x0000000c0a3b1e6f51474958c29e5210
14:54:37:WU03:FS00:Uploading 657B to 171.64.65.75
14:54:37:WU03:FS00:Connecting to 171.64.65.75:8080
14:54:37:WU03:FS00:Upload complete
14:54:37:WU03:FS00:Server responded WORK_ACK (400)
14:54:37:WU03:FS00:Cleaning up
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: 10138/10139/10140 EUE

Post by Joe_H »

The log section you provided showed failures running at SMP:10 for just these three WU's:

Project: 10139 (Run 5, Clone 4, Gen 11)

Project: 10139 (Run 58, Clone 2, Gen 4)

Project: 10138 (Run 38, Clone 2, Gen 8)

Do you have examples of any others failing and at settings other than 10? There are no other reports currently available in the database on these WU's, so whether it is the SMP setting or a bad WU can not yet be determined. These projects recently moved from Advanced, so it is possible some settings did not get fully tested.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
wrinvert
Posts: 16
Joined: Sat Oct 22, 2011 8:24 am

Re: 10138/10139/10140 EUE

Post by wrinvert »

its seems to be only on smp10/12 as soon as I change it to 8/12(I cant run 12/12 as im also running 3 gpu clients) it runs fine. here is a log of 10140:
10140 run:74 clone:0 gen:14

Code: Select all

14:53:56:WU00:FS00:Connecting to assign3.stanford.edu:8080
14:53:57:WU00:FS00:News: Welcome to Folding@Home
14:53:57:WU00:FS00:Assigned to work server 171.64.65.75
14:53:57:WU00:FS00:Requesting new work unit for slot 00: READY smp:10 from 171.64.65.75
14:53:57:WU00:FS00:Connecting to 171.64.65.75:8080
14:53:58:WU00:FS00:Downloading 947.02KiB
14:54:01:WU00:FS00:Download complete
14:54:01:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10140 run:74 clone:0 gen:14 core:0xa3 unit:0x000000160a3b1e6f5149ee322531ee7c
14:54:01:WU00:FS00:Starting
14:54:01:WU00:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 702 -lifeline 6548 -checkpoint 15 -np 10
14:54:01:WU00:FS00:Started FahCore on PID 4252
14:54:01:WU00:FS00:Core PID:584
14:54:01:WU00:FS00:FahCore 0xa3 started
14:54:02:WU00:FS00:0xa3:
14:54:02:WU00:FS00:0xa3:*------------------------------*
14:54:02:WU00:FS00:0xa3:Folding@Home Gromacs SMP Core
14:54:02:WU00:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
14:54:02:WU00:FS00:0xa3:
14:54:02:WU00:FS00:0xa3:Preparing to commence simulation
14:54:02:WU00:FS00:0xa3:- Looking at optimizations...
14:54:02:WU00:FS00:0xa3:- Created dyn
14:54:02:WU00:FS00:0xa3:- Files status OK
14:54:02:WU00:FS00:0xa3:- Expanded 969237 -> 2021624 (decompressed 208.5 percent)
14:54:02:WU00:FS00:0xa3:Called DecompressByteArray: compressed_data_size=969237 data_size=2021624, decompressed_data_size=2021624 diff=0
14:54:02:WU00:FS00:0xa3:- Digital signature verified
14:54:02:WU00:FS00:0xa3:
14:54:02:WU00:FS00:0xa3:Project: 10140 (Run 74, Clone 0, Gen 14)
14:54:02:WU00:FS00:0xa3:
14:54:02:WU00:FS00:0xa3:Assembly optimizations on if available.
14:54:02:WU00:FS00:0xa3:Entering M.D.
14:54:07:WU00:FS00:0xa3:Mapping NT from 10 to 10 
14:54:08:WU00:FS00:0xa3:mdrun returned 255
14:54:08:WU00:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
14:54:08:WU00:FS00:0xa3:Work fraction=0.0000 steps=2000000.
14:54:11:WU00:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
14:54:11:WU00:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
14:54:11:WU00:FS00:0xa3:- Writing 641 bytes of core data to disk...
14:54:11:WU00:FS00:0xa3:Done: 129 -> 144 (compressed to 111.6 percent)
14:54:11:WU00:FS00:0xa3:  ... Done.
14:54:16:WU00:FS00:0xa3:
14:54:16:WU00:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
14:54:16:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:54:16:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:10140 run:74 clone:0 gen:14 core:0xa3 unit:0x000000160a3b1e6f5149ee322531ee7c
14:54:16:WU00:FS00:Uploading 656B to 171.64.65.75
14:54:16:WU00:FS00:Connecting to 171.64.65.75:8080
14:54:17:WU00:FS00:Upload complete
14:54:17:WU00:FS00:Server responded WORK_ACK (400)
14:54:17:WU00:FS00:Cleaning up
10138 run:40 clone:6 gen:9

Code: Select all

14:53:16:WU05:FS00:Connecting to assign3.stanford.edu:8080
14:53:16:WU05:FS00:News: Welcome to Folding@Home
14:53:16:WU05:FS00:Assigned to work server 171.64.65.75
14:53:16:WU05:FS00:Requesting new work unit for slot 00: READY smp:10 from 171.64.65.75
14:53:16:WU05:FS00:Connecting to 171.64.65.75:8080
14:53:17:WU05:FS00:Downloading 958.97KiB
14:53:18:WU00:FS00:Upload 33.33%
14:53:21:WU05:FS00:Download complete
14:53:21:WU05:FS00:Received Unit: id:05 state:DOWNLOAD error:NO_ERROR project:10138 run:40 clone:6 gen:9 core:0xa3 unit:0x0000000e0a3b1e6f5147496207a9da26
14:53:21:WU05:FS00:Starting
14:53:21:WU05:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 05 -suffix 01 -version 702 -lifeline 6548 -checkpoint 15 -np 10
14:53:21:WU05:FS00:Started FahCore on PID 5404
14:53:21:WU05:FS00:Core PID:4880
14:53:21:WU05:FS00:FahCore 0xa3 started
14:53:21:WU05:FS00:Downloading project 10138 description
14:53:21:WU05:FS00:Connecting to fah-web.stanford.edu:80
14:53:21:WU05:FS00:Project 10138 description downloaded successfully
14:53:21:WU05:FS00:0xa3:
14:53:21:WU05:FS00:0xa3:*------------------------------*
14:53:21:WU05:FS00:0xa3:Folding@Home Gromacs SMP Core
14:53:21:WU05:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
14:53:21:WU05:FS00:0xa3:
14:53:21:WU05:FS00:0xa3:Preparing to commence simulation
14:53:21:WU05:FS00:0xa3:- Looking at optimizations...
14:53:21:WU05:FS00:0xa3:- Created dyn
14:53:21:WU05:FS00:0xa3:- Files status OK
14:53:21:WU05:FS00:0xa3:- Expanded 981478 -> 2035048 (decompressed 207.3 percent)
14:53:21:WU05:FS00:0xa3:Called DecompressByteArray: compressed_data_size=981478 data_size=2035048, decompressed_data_size=2035048 diff=0
14:53:21:WU05:FS00:0xa3:- Digital signature verified
14:53:21:WU05:FS00:0xa3:
14:53:21:WU05:FS00:0xa3:Project: 10138 (Run 40, Clone 6, Gen 9)
14:53:21:WU05:FS00:0xa3:
14:53:21:WU05:FS00:0xa3:Assembly optimizations on if available.
14:53:21:WU05:FS00:0xa3:Entering M.D.
14:53:24:WU00:FS00:Upload 46.96%
14:53:27:WU05:FS00:0xa3:Mapping NT from 10 to 10 
14:53:27:WU05:FS00:0xa3:mdrun returned 255
14:53:27:WU05:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
14:53:27:WU05:FS00:0xa3:Work fraction=0.0000 steps=2000000.
14:53:30:WU00:FS00:Upload 59.08%
14:53:31:WU05:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
14:53:31:WU05:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
14:53:31:WU05:FS00:0xa3:- Writing 641 bytes of core data to disk...
14:53:31:WU05:FS00:0xa3:Done: 129 -> 145 (compressed to 112.4 percent)
14:53:31:WU05:FS00:0xa3:  ... Done.
14:53:35:WU05:FS00:0xa3:
14:53:35:WU05:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
14:53:36:WARNING:WU05:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:53:36:WU05:FS00:Sending unit results: id:05 state:SEND error:FAULTY project:10138 run:40 clone:6 gen:9 core:0xa3 unit:0x0000000e0a3b1e6f5147496207a9da26
14:53:36:WU05:FS00:Uploading 657B to 171.64.65.75
14:53:36:WU05:FS00:Connecting to 171.64.65.75:8080
14:53:36:WU00:FS00:Upload 72.72%
14:53:36:WU03:FS00:Connecting to assign3.stanford.edu:8080
14:53:36:WU05:FS00:Upload complete
14:53:36:WU05:FS00:Server responded WORK_ACK (400)
14:53:36:WU05:FS00:Cleaning up
Adam_Ford
Posts: 18
Joined: Sun Nov 18, 2012 3:09 am

Re: 10138/10139/10140 EUE

Post by Adam_Ford »

These projects won't work with 5 either on three of my computers
Image
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: 10138/10139/10140 EUE

Post by Joe_H »

So far two of the five WU's you have reported have failed for other folders. But we have no information on their folding setups to compare with yours. I will attempt to contact the project manager for these to see if he can detect a problem. In the meantime, please post the beginning section of your log that shows your system configuration and folding settings.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
wrinvert
Posts: 16
Joined: Sat Oct 22, 2011 8:24 am

Re: 10138/10139/10140 EUE

Post by wrinvert »

Code: Select all

*********************** Log Started 2013-04-18T02:27:50Z ***********************
02:27:50:************************* Folding@home Client *************************
02:27:50:      Website: http://folding.stanford.edu/
02:27:50:    Copyright: (c) 2009-2012 Stanford University
02:27:50:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
02:27:50:         Args: --lifeline 1156 --command-port=36330
02:27:50:       Config: E:/V7 folding/config.xml
02:27:50:******************************** Build ********************************
02:27:50:      Version: 7.2.9
02:27:50:         Date: Oct 3 2012
02:27:50:         Time: 18:05:48
02:27:50:      SVN Rev: 3578
02:27:50:       Branch: fah/trunk/client
02:27:50:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
02:27:50:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
02:27:50:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
02:27:50:     Platform: win32 XP
02:27:50:         Bits: 32
02:27:50:         Mode: Release
02:27:50:******************************* System ********************************
02:27:50:          CPU: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz
02:27:50:       CPU ID: GenuineIntel Family 6 Model 45 Stepping 7
02:27:50:         CPUs: 12
02:27:50:       Memory: 15.95GiB
02:27:50:  Free Memory: 12.23GiB
02:27:50:      Threads: WINDOWS_THREADS
02:27:50:   On Battery: false
02:27:50:   UTC offset: -4
02:27:50:          PID: 6548
02:27:50:          CWD: E:/V7 folding
02:27:50:           OS: Windows 7 Home Premium
02:27:50:      OS Arch: AMD64
02:27:50:         GPUs: 3
02:27:50:        GPU 0: NVIDIA:2 GF114 [GeForce GTX 680]
02:27:50:        GPU 1: NVIDIA:2 GF114 [GeForce GTX 680]
02:27:50:        GPU 2: NVIDIA:2 GF114 [GeForce GTX 680]
02:27:50:         CUDA: 3.0
02:27:50:  CUDA Driver: 5000
02:27:50:Win32 Service: false
02:27:50:***********************************************************************
02:27:50:<config>
02:27:50:  <!-- FahCore Control -->
02:27:50:  <core-priority v='low'/>
02:27:50:
02:27:50:  <!-- Network -->
02:27:50:  <proxy v=':8080'/>
02:27:50:
02:27:50:  <!-- Remote Command Server -->
02:27:50:  <command-allow v='127.0.0.1,192.168.1.102/104/106'/>
02:27:50:  <password v='**********'/>
02:27:50:
02:27:50:  <!-- Slot Control -->
02:27:50:  <pause-on-start v='true'/>
02:27:50:
02:27:50:  <!-- User Information -->
02:27:50:  <passkey v='********************************'/>
02:27:50:  <team v='111065'/>
02:27:50:  <user v='wrinvert'/>
02:27:50:
02:27:50:  <!-- Folding Slots -->
02:27:50:  <slot id='0' type='SMP'>
02:27:50:    <cpus v='10'/>
02:27:50:  </slot>
02:27:50:  <slot id='1' type='GPU'>
02:27:50:    <cuda-index v='0'/>
02:27:50:    <opencl-index v='0'/>
02:27:50:  </slot>
02:27:50:  <slot id='2' type='GPU'>
02:27:50:    <cuda-index v='2'/>
02:27:50:    <opencl-index v='2'/>
02:27:50:  </slot>
02:27:50:  <slot id='3' type='GPU'>
02:27:50:    <cuda-index v='1'/>
02:27:50:    <opencl-index v='1'/>
02:27:50:  </slot>
02:27:50:</config>
Scottie_314159
Posts: 5
Joined: Mon Dec 19, 2011 5:09 pm

Re: 10138/10139/10140 EUE

Post by Scottie_314159 »

I have also had some problems with these WU.

System config: SMP 10 slot on i7 and GPU slot

Code: Select all

*********************** Log Started 2013-04-11T14:10:39Z ***********************
14:10:39:************************* Folding@home Client *************************
14:10:39:      Website: http://folding.stanford.edu/
14:10:39:    Copyright: (c) 2009-2013 Stanford University
14:10:39:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
14:10:39:         Args: 
14:10:39:       Config: C:/Users/Scott/AppData/Roaming/FAHClient/config.xml
14:10:39:******************************** Build ********************************
14:10:39:      Version: 7.3.6
14:10:39:         Date: Feb 18 2013
14:10:39:         Time: 15:25:17
14:10:39:      SVN Rev: 3923
14:10:39:       Branch: fah/trunk/client
14:10:39:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
14:10:39:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
14:10:39:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
14:10:39:     Platform: win32 XP
14:10:39:         Bits: 32
14:10:39:         Mode: Release
14:10:39:******************************* System ********************************
14:10:39:          CPU: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz
14:10:39:       CPU ID: GenuineIntel Family 6 Model 45 Stepping 7
14:10:39:         CPUs: 12
14:10:39:       Memory: 15.95GiB
14:10:39:  Free Memory: 14.09GiB
14:10:39:      Threads: WINDOWS_THREADS
14:10:39:  Has Battery: false
14:10:39:   On Battery: false
14:10:39:   UTC offset: -4
14:10:39:          PID: 5532
14:10:39:          CWD: C:/Users/Scott/AppData/Roaming/FAHClient
14:10:39:           OS: Windows 8 Pro with Media Center
14:10:39:      OS Arch: AMD64
14:10:39:         GPUs: 1
14:10:39:        GPU 0: NVIDIA:3 GK110 [GeForce GTX Titan]
14:10:39:         CUDA: 3.5
14:10:39:  CUDA Driver: 5000
14:10:39:Win32 Service: false
14:10:39:***********************************************************************
14:10:39:<config>
14:10:39:  <!-- Folding Slot Configuration -->
14:10:39:  <power v='full'/>
14:10:39:
14:10:39:  <!-- Network -->
14:10:39:  <proxy v=':8080'/>
14:10:39:
14:10:39:  <!-- User Information -->
14:10:39:  <passkey v='********************************'/>
14:10:39:  <team v='11108'/>
14:10:39:  <user v='Scottie_314159'/>
14:10:39:
14:10:39:  <!-- Folding Slots -->
14:10:39:  <slot id='3' type='CPU'>
14:10:39:    <cpus v='10'/>
14:10:39:  </slot>
14:10:39:  <slot id='0' type='GPU'/>
14:10:39:</config>
14:10:39:Trying to access database...
14:10:39:Successfully acquired database lock
14:10:39:Enabled folding slot 03: READY cpu:10
14:10:39:Enabled folding slot 00: READY gpu:0:GK110 [GeForce GTX Titan]
and log:

Code: Select all

08:34:55:WU00:FS03:0xa3:*------------------------------*
08:34:55:WU00:FS03:0xa3:Folding@Home Gromacs SMP Core
08:34:55:WU00:FS03:0xa3:Version 2.27 (Dec. 15, 2010)
08:34:55:WU00:FS03:0xa3:
08:34:55:WU00:FS03:0xa3:Preparing to commence simulation
08:34:55:WU00:FS03:0xa3:- Looking at optimizations...
08:34:55:WU00:FS03:0xa3:- Created dyn
08:34:55:WU00:FS03:0xa3:- Files status OK
08:34:55:WU00:FS03:0xa3:- Expanded 978510 -> 2031392 (decompressed 207.6 percent)
08:34:55:WU00:FS03:0xa3:Called DecompressByteArray: compressed_data_size=978510 data_size=2031392, decompressed_data_size=2031392 diff=0
08:34:55:WU00:FS03:0xa3:- Digital signature verified
08:34:55:WU00:FS03:0xa3:
08:34:55:WU00:FS03:0xa3:Project: 10139 (Run 84, Clone 8, Gen 5)
08:34:55:WU00:FS03:0xa3:
08:34:55:WU00:FS03:0xa3:Assembly optimizations on if available.
08:34:55:WU00:FS03:0xa3:Entering M.D.
08:35:00:WU01:FS03:Upload 92.76%
08:35:01:WU01:FS03:Upload complete
08:35:01:WU01:FS03:Server responded WORK_ACK (400)
08:35:01:WU01:FS03:Final credit estimate, 2361.00 points
08:35:01:WU01:FS03:Cleaning up
08:35:01:WU00:FS03:0xa3:Mapping NT from 10 to 10 
08:35:01:WU00:FS03:0xa3:mdrun returned 255
08:35:01:WU00:FS03:0xa3:Going to send back what have done -- stepsTotalG=2000000
08:35:01:WU00:FS03:0xa3:Work fraction=0.0000 steps=2000000.
08:35:05:WU00:FS03:0xa3:logfile size=6820 infoLength=6820 edr=0 trr=25
08:35:05:WU00:FS03:0xa3:logfile size: 6820 info=6820 bed=0 hdr=25
08:35:05:WU00:FS03:0xa3:- Writing 7358 bytes of core data to disk...
08:35:05:WU00:FS03:0xa3:Done: 6846 -> 2410 (compressed to 35.2 percent)
08:35:05:WU00:FS03:0xa3:  ... Done.
08:35:05:WU00:FS03:0xa3:
08:35:05:WU00:FS03:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
08:35:05:WARNING:WU00:FS03:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:35:05:WU00:FS03:Sending unit results: id:00 state:SEND error:FAULTY project:10139 run:84 clone:8 gen:5 core:0xa3 unit:0x0000000a0a3b1e6f51474bb13c96c575
08:35:05:WU00:FS03:Uploading 2.85KiB to 171.64.65.75
08:35:05:WU00:FS03:Connecting to 171.64.65.75:8080
08:35:05:WU00:FS03:Upload complete
08:35:05:WU00:FS03:Server responded WORK_ACK (400)
08:35:05:WU00:FS03:Cleaning up
08:35:06:WU00:FS03:Connecting to assign3.stanford.edu:8080
08:35:06:WU00:FS03:News: Welcome to Folding@Home
08:35:06:WU00:FS03:Assigned to work server 171.64.65.75
08:35:06:WU00:FS03:Requesting new work unit for slot 03: READY cpu:10 from 171.64.65.75
08:35:06:WU00:FS03:Connecting to 171.64.65.75:8080
08:35:07:WU00:FS03:Downloading 960.02KiB
08:35:08:WU00:FS03:Download complete
08:35:08:WU00:FS03:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10138 run:85 clone:0 gen:8 core:0xa3 unit:0x000000110a3b1e6f51474a18e61686c8
08:35:08:WU00:FS03:Starting
08:35:08:WU00:FS03:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Scott/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 00 -suffix 01 -version 703 -lifeline 5532 -checkpoint 15 -np 10
08:35:08:WU00:FS03:Started FahCore on PID 2496
08:35:08:WU00:FS03:Core PID:2104
08:35:08:WU00:FS03:FahCore 0xa3 started
08:35:08:WU00:FS03:0xa3:
08:35:08:WU00:FS03:0xa3:*------------------------------*
08:35:08:WU00:FS03:0xa3:Folding@Home Gromacs SMP Core
08:35:08:WU00:FS03:0xa3:Version 2.27 (Dec. 15, 2010)
08:35:08:WU00:FS03:0xa3:
08:35:08:WU00:FS03:0xa3:Preparing to commence simulation
08:35:08:WU00:FS03:0xa3:- Looking at optimizations...
08:35:08:WU00:FS03:0xa3:- Created dyn
08:35:08:WU00:FS03:0xa3:- Files status OK
08:35:08:WU00:FS03:0xa3:- Expanded 982548 -> 2035048 (decompressed 207.1 percent)
08:35:08:WU00:FS03:0xa3:Called DecompressByteArray: compressed_data_size=982548 data_size=2035048, decompressed_data_size=2035048 diff=0
08:35:08:WU00:FS03:0xa3:- Digital signature verified
08:35:08:WU00:FS03:0xa3:
08:35:08:WU00:FS03:0xa3:Project: 10138 (Run 85, Clone 0, Gen 8)
08:35:08:WU00:FS03:0xa3:
08:35:08:WU00:FS03:0xa3:Assembly optimizations on if available.
08:35:08:WU00:FS03:0xa3:Entering M.D.
08:35:14:WU00:FS03:0xa3:Mapping NT from 10 to 10 
08:35:14:WU00:FS03:0xa3:mdrun returned 255
08:35:14:WU00:FS03:0xa3:Going to send back what have done -- stepsTotalG=2000000
08:35:14:WU00:FS03:0xa3:Work fraction=0.0000 steps=2000000.
08:35:18:WU00:FS03:0xa3:logfile size=6819 infoLength=6819 edr=0 trr=25
08:35:18:WU00:FS03:0xa3:logfile size: 6819 info=6819 bed=0 hdr=25
08:35:18:WU00:FS03:0xa3:- Writing 7357 bytes of core data to disk...
08:35:18:WU00:FS03:0xa3:Done: 6845 -> 2405 (compressed to 35.1 percent)
08:35:18:WU00:FS03:0xa3:  ... Done.
08:35:18:WU00:FS03:0xa3:
08:35:18:WU00:FS03:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
08:35:18:WARNING:WU00:FS03:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:35:18:WU00:FS03:Sending unit results: id:00 state:SEND error:FAULTY project:10138 run:85 clone:0 gen:8 core:0xa3 unit:0x000000110a3b1e6f51474a18e61686c8
08:35:18:WU00:FS03:Uploading 2.85KiB to 171.64.65.75
08:35:18:WU00:FS03:Connecting to 171.64.65.75:8080
08:35:19:WU00:FS03:Upload complete
08:35:19:WU00:FS03:Server responded WORK_ACK (400)
08:35:19:WU00:FS03:Cleaning up
08:35:19:WU01:FS03:Connecting to assign3.stanford.edu:8080
08:35:19:WU01:FS03:News: Welcome to Folding@Home
08:35:19:WU01:FS03:Assigned to work server 171.64.65.75
08:35:19:WU01:FS03:Requesting new work unit for slot 03: READY cpu:10 from 171.64.65.75
08:35:19:WU01:FS03:Connecting to 171.64.65.75:8080
08:35:20:WU01:FS03:Downloading 957.40KiB
08:35:21:WU01:FS03:Download complete
08:35:21:WU01:FS03:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:10139 run:92 clone:6 gen:1 core:0xa3 unit:0x000000040a3b1e6f51474bd156ca01af
08:35:21:WU01:FS03:Starting
08:35:21:WU01:FS03:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Scott/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 01 -suffix 01 -version 703 -lifeline 5532 -checkpoint 15 -np 10
08:35:21:WU01:FS03:Started FahCore on PID 2248
08:35:21:WU01:FS03:Core PID:6164
08:35:21:WU01:FS03:FahCore 0xa3 started
08:35:22:WU01:FS03:0xa3:
08:35:22:WU01:FS03:0xa3:*------------------------------*
08:35:22:WU01:FS03:0xa3:Folding@Home Gromacs SMP Core
08:35:22:WU01:FS03:0xa3:Version 2.27 (Dec. 15, 2010)
08:35:22:WU01:FS03:0xa3:
08:35:22:WU01:FS03:0xa3:Preparing to commence simulation
08:35:22:WU01:FS03:0xa3:- Looking at optimizations...
08:35:22:WU01:FS03:0xa3:- Created dyn
08:35:22:WU01:FS03:0xa3:- Files status OK
08:35:22:WU01:FS03:0xa3:- Expanded 979868 -> 2031392 (decompressed 207.3 percent)
08:35:22:WU01:FS03:0xa3:Called DecompressByteArray: compressed_data_size=979868 data_size=2031392, decompressed_data_size=2031392 diff=0
08:35:22:WU01:FS03:0xa3:- Digital signature verified
08:35:22:WU01:FS03:0xa3:
08:35:22:WU01:FS03:0xa3:Project: 10139 (Run 92, Clone 6, Gen 1)
08:35:22:WU01:FS03:0xa3:
08:35:22:WU01:FS03:0xa3:Assembly optimizations on if available.
08:35:22:WU01:FS03:0xa3:Entering M.D.
08:35:27:WU01:FS03:0xa3:Mapping NT from 10 to 10 
08:35:27:WU01:FS03:0xa3:mdrun returned 255
08:35:27:WU01:FS03:0xa3:Going to send back what have done -- stepsTotalG=2000000
08:35:27:WU01:FS03:0xa3:Work fraction=0.0000 steps=2000000.
08:35:31:WU01:FS03:0xa3:logfile size=6819 infoLength=6819 edr=0 trr=25
08:35:31:WU01:FS03:0xa3:logfile size: 6819 info=6819 bed=0 hdr=25
08:35:31:WU01:FS03:0xa3:- Writing 7357 bytes of core data to disk...
08:35:31:WU01:FS03:0xa3:Done: 6845 -> 2399 (compressed to 35.0 percent)
08:35:31:WU01:FS03:0xa3:  ... Done.
08:35:31:WU01:FS03:0xa3:
08:35:31:WU01:FS03:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
08:35:32:WARNING:WU01:FS03:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:35:32:WU01:FS03:Sending unit results: id:01 state:SEND error:FAULTY project:10139 run:92 clone:6 gen:1 core:0xa3 unit:0x000000040a3b1e6f51474bd156ca01af
08:35:32:WU01:FS03:Uploading 2.84KiB to 171.64.65.75
08:35:32:WU01:FS03:Connecting to 171.64.65.75:8080
08:35:32:WU01:FS03:Upload complete
08:35:32:WU01:FS03:Server responded WORK_ACK (400)
08:35:32:WU01:FS03:Cleaning up
08:35:32:WU00:FS03:Connecting to assign3.stanford.edu:8080
08:35:32:WU00:FS03:News: Welcome to Folding@Home
08:35:32:WU00:FS03:Assigned to work server 171.64.65.75
08:35:32:WU00:FS03:Requesting new work unit for slot 03: READY cpu:10 from 171.64.65.75
08:35:32:WU00:FS03:Connecting to 171.64.65.75:8080
08:35:33:WU00:FS03:Downloading 946.73KiB
08:35:35:WU00:FS03:Download complete
08:35:36:WU00:FS03:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10140 run:16 clone:7 gen:1 core:0xa3 unit:0x000000060a3b1e6f5149ed436879794c
08:35:36:WU00:FS03:Starting
08:35:36:WU00:FS03:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Scott/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 00 -suffix 01 -version 703 -lifeline 5532 -checkpoint 15 -np 10
08:35:36:WU00:FS03:Started FahCore on PID 6416
08:35:36:WU00:FS03:Core PID:4228
08:35:36:WU00:FS03:FahCore 0xa3 started
08:35:36:WU00:FS03:0xa3:
08:35:36:WU00:FS03:0xa3:*------------------------------*
08:35:36:WU00:FS03:0xa3:Folding@Home Gromacs SMP Core
08:35:36:WU00:FS03:0xa3:Version 2.27 (Dec. 15, 2010)
08:35:36:WU00:FS03:0xa3:
08:35:36:WU00:FS03:0xa3:Preparing to commence simulation
08:35:36:WU00:FS03:0xa3:- Looking at optimizations...
08:35:36:WU00:FS03:0xa3:- Created dyn
08:35:36:WU00:FS03:0xa3:- Files status OK
08:35:36:WU00:FS03:0xa3:- Expanded 968939 -> 2021624 (decompressed 208.6 percent)
08:35:36:WU00:FS03:0xa3:Called DecompressByteArray: compressed_data_size=968939 data_size=2021624, decompressed_data_size=2021624 diff=0
08:35:36:WU00:FS03:0xa3:- Digital signature verified
08:35:36:WU00:FS03:0xa3:
08:35:36:WU00:FS03:0xa3:Project: 10140 (Run 16, Clone 7, Gen 1)
08:35:36:WU00:FS03:0xa3:
08:35:36:WU00:FS03:0xa3:Assembly optimizations on if available.
08:35:36:WU00:FS03:0xa3:Entering M.D.
08:35:42:WU00:FS03:0xa3:Mapping NT from 10 to 10 
08:35:42:WU00:FS03:0xa3:mdrun returned 255
08:35:42:WU00:FS03:0xa3:Going to send back what have done -- stepsTotalG=2000000
08:35:42:WU00:FS03:0xa3:Work fraction=0.0000 steps=2000000.
08:35:46:WU00:FS03:0xa3:logfile size=6817 infoLength=6817 edr=0 trr=25
08:35:46:WU00:FS03:0xa3:logfile size: 6817 info=6817 bed=0 hdr=25
08:35:46:WU00:FS03:0xa3:- Writing 7355 bytes of core data to disk...
08:35:46:WU00:FS03:0xa3:Done: 6843 -> 2414 (compressed to 35.2 percent)
08:35:46:WU00:FS03:0xa3:  ... Done.
08:35:46:WU00:FS03:0xa3:
08:35:46:WU00:FS03:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
08:35:46:WARNING:WU00:FS03:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:35:46:WU00:FS03:Sending unit results: id:00 state:SEND error:FAULTY project:10140 run:16 clone:7 gen:1 core:0xa3 unit:0x000000060a3b1e6f5149ed436879794c
08:35:46:WU00:FS03:Uploading 2.86KiB to 171.64.65.75
08:35:46:WU00:FS03:Connecting to 171.64.65.75:8080
08:35:46:WU00:FS03:Upload complete
08:35:46:WU00:FS03:Server responded WORK_ACK (400)
08:35:46:WU00:FS03:Cleaning up
08:35:46:WU01:FS03:Connecting to assign3.stanford.edu:8080
08:35:47:WU01:FS03:News: Welcome to Folding@Home
08:35:47:WU01:FS03:Assigned to work server 171.64.65.75
08:35:47:WU01:FS03:Requesting new work unit for slot 03: READY cpu:10 from 171.64.65.75
08:35:47:WU01:FS03:Connecting to 171.64.65.75:8080
08:35:47:WU01:FS03:Downloading 960.44KiB
08:35:50:WU01:FS03:Download complete
08:35:50:WU01:FS03:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:10138 run:98 clone:6 gen:2 core:0xa3 unit:0x000000090a3b1e6f51474a4f083c7dcc
08:35:50:WU01:FS03:Starting
08:35:50:WU01:FS03:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Scott/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 01 -suffix 01 -version 703 -lifeline 5532 -checkpoint 15 -np 10
08:35:50:WU01:FS03:Started FahCore on PID 6864
08:35:50:WU01:FS03:Core PID:2492
08:35:50:WU01:FS03:FahCore 0xa3 started
08:35:50:WU01:FS03:0xa3:
08:35:50:WU01:FS03:0xa3:*------------------------------*
08:35:50:WU01:FS03:0xa3:Folding@Home Gromacs SMP Core
08:35:50:WU01:FS03:0xa3:Version 2.27 (Dec. 15, 2010)
08:35:50:WU01:FS03:0xa3:
08:35:50:WU01:FS03:0xa3:Preparing to commence simulation
08:35:50:WU01:FS03:0xa3:- Looking at optimizations...
08:35:50:WU01:FS03:0xa3:- Created dyn
08:35:50:WU01:FS03:0xa3:- Files status OK
08:35:50:WU01:FS03:0xa3:- Expanded 982983 -> 2035048 (decompressed 207.0 percent)
08:35:50:WU01:FS03:0xa3:Called DecompressByteArray: compressed_data_size=982983 data_size=2035048, decompressed_data_size=2035048 diff=0
08:35:50:WU01:FS03:0xa3:- Digital signature verified
08:35:50:WU01:FS03:0xa3:
08:35:50:WU01:FS03:0xa3:Project: 10138 (Run 98, Clone 6, Gen 2)
08:35:50:WU01:FS03:0xa3:
08:35:50:WU01:FS03:0xa3:Assembly optimizations on if available.
08:35:50:WU01:FS03:0xa3:Entering M.D.
08:35:56:WU01:FS03:0xa3:Mapping NT from 10 to 10 
08:35:56:WU01:FS03:0xa3:mdrun returned 255
08:35:56:WU01:FS03:0xa3:Going to send back what have done -- stepsTotalG=2000000
08:35:56:WU01:FS03:0xa3:Work fraction=0.0000 steps=2000000.
08:36:00:WU01:FS03:0xa3:logfile size=6819 infoLength=6819 edr=0 trr=25
08:36:00:WU01:FS03:0xa3:logfile size: 6819 info=6819 bed=0 hdr=25
08:36:00:WU01:FS03:0xa3:- Writing 7357 bytes of core data to disk...
08:36:00:WU01:FS03:0xa3:Done: 6845 -> 2403 (compressed to 35.1 percent)
08:36:00:WU01:FS03:0xa3:  ... Done.
08:36:00:WU01:FS03:0xa3:
08:36:00:WU01:FS03:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
08:36:00:WARNING:WU01:FS03:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:36:00:WU01:FS03:Sending unit results: id:01 state:SEND error:FAULTY project:10138 run:98 clone:6 gen:2 core:0xa3 unit:0x000000090a3b1e6f51474a4f083c7dcc
08:36:00:WU01:FS03:Uploading 2.85KiB to 171.64.65.75
08:36:00:WU01:FS03:Connecting to 171.64.65.75:8080
08:36:00:WU01:FS03:Upload complete
08:36:00:WU01:FS03:Server responded WORK_ACK (400)
08:36:00:WU01:FS03:Cleaning up

I haven't tried anything, just woke up and saw the errors.
EXT64
Posts: 323
Joined: Mon Apr 09, 2012 11:54 pm

Re: 10138/10139/10140 EUE

Post by EXT64 »

Same here - SMP 10

Code: Select all

12:49:43:WU01:FS01:0xa3:Project: 10139 (Run 67, Clone 3, Gen 8)
12:49:43:WU01:FS01:0xa3:
12:49:43:WU01:FS01:0xa3:Assembly optimizations on if available.
12:49:43:WU01:FS01:0xa3:Entering M.D.
12:49:49:WU00:FS01:Upload 12.35%
12:49:49:WU01:FS01:0xa3:Mapping NT from 10 to 10 
12:49:49:WU01:FS01:0xa3:mdrun returned 255
12:49:49:WU01:FS01:0xa3:Going to send back what have done -- stepsTotalG=2000000
12:49:49:WU01:FS01:0xa3:Work fraction=0.0000 steps=2000000.
12:49:53:WU01:FS01:0xa3:logfile size=6820 infoLength=6820 edr=0 trr=25
12:49:53:WU01:FS01:0xa3:logfile size: 6820 info=6820 bed=0 hdr=25
12:49:53:WU01:FS01:0xa3:- Writing 7358 bytes of core data to disk...
12:49:53:WU01:FS01:0xa3:Done: 6846 -> 2397 (compressed to 35.0 percent)
12:49:53:WU01:FS01:0xa3:  ... Done.
12:49:53:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:49:53:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:10139 run:67 clone:3 gen:8 core:0xa3 unit:0x000000100a3b1e6f51474b697865572d
12:49:54:WU01:FS01:Uploading 2.84KiB to 171.64.65.75
wrinvert
Posts: 16
Joined: Sat Oct 22, 2011 8:24 am

Re: 10138/10139/10140 EUE

Post by wrinvert »

got another run of these on 10/12.... im starting to wonder how close this is getting to effecting my passkey.

Code: Select all

20:15:13:WU00:FS00:Connecting to assign3.stanford.edu:8080
20:15:13:WU00:FS00:News: Welcome to Folding@Home
20:15:13:WU00:FS00:Assigned to work server 171.64.65.75
20:15:13:WU00:FS00:Requesting new work unit for slot 00: RUNNING smp:10 from 171.64.65.75
20:15:13:WU00:FS00:Connecting to 171.64.65.75:8080
20:15:14:WU00:FS00:Downloading 949.26KiB
20:15:18:WU00:FS00:Download complete
20:15:18:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10140 run:86 clone:0 gen:7 core:0xa3 unit:0x0000000c0a3b1e6f5149ee64ac220ab2
20:22:01:WU00:FS00:Starting
20:22:01:WU00:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 702 -lifeline 7016 -checkpoint 15 -np 10
20:22:01:WU00:FS00:Started FahCore on PID 244
20:22:01:WU00:FS00:Core PID:1680
20:22:01:WU00:FS00:FahCore 0xa3 started
20:22:01:WU00:FS00:0xa3:
20:22:01:WU00:FS00:0xa3:*------------------------------*
20:22:01:WU00:FS00:0xa3:Folding@Home Gromacs SMP Core
20:22:01:WU00:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
20:22:01:WU00:FS00:0xa3:
20:22:01:WU00:FS00:0xa3:Preparing to commence simulation
20:22:01:WU00:FS00:0xa3:- Looking at optimizations...
20:22:01:WU00:FS00:0xa3:- Created dyn
20:22:01:WU00:FS00:0xa3:- Files status OK
20:22:01:WU00:FS00:0xa3:- Expanded 971533 -> 2021624 (decompressed 208.0 percent)
20:22:01:WU00:FS00:0xa3:Called DecompressByteArray: compressed_data_size=971533 data_size=2021624, decompressed_data_size=2021624 diff=0
20:22:01:WU00:FS00:0xa3:- Digital signature verified
20:22:01:WU00:FS00:0xa3:
20:22:01:WU00:FS00:0xa3:Project: 10140 (Run 86, Clone 0, Gen 7)
20:22:01:WU00:FS00:0xa3:
20:22:01:WU00:FS00:0xa3:Assembly optimizations on if available.
20:22:01:WU00:FS00:0xa3:Entering M.D.
20:22:07:WU00:FS00:0xa3:Mapping NT from 10 to 10 
20:22:07:WU00:FS00:0xa3:mdrun returned 255
20:22:07:WU00:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
20:22:07:WU00:FS00:0xa3:Work fraction=0.0000 steps=2000000.
20:22:11:WU00:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
20:22:11:WU00:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
20:22:11:WU00:FS00:0xa3:- Writing 641 bytes of core data to disk...
20:22:11:WU00:FS00:0xa3:Done: 129 -> 144 (compressed to 111.6 percent)
20:22:11:WU00:FS00:0xa3:  ... Done.
20:22:15:WU00:FS00:0xa3:
20:22:15:WU00:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
20:22:16:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
20:22:16:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:10140 run:86 clone:0 gen:7 core:0xa3 unit:0x0000000c0a3b1e6f5149ee64ac220ab2
20:22:16:WU00:FS00:Uploading 656B to 171.64.65.75
20:22:16:WU00:FS00:Connecting to 171.64.65.75:8080
20:22:16:WU00:FS00:Upload complete
20:22:16:WU00:FS00:Server responded WORK_ACK (400)
20:22:16:WU00:FS00:Cleaning up
20:22:36:WU00:FS00:Connecting to assign3.stanford.edu:8080
20:22:37:WU00:FS00:News: Welcome to Folding@Home
20:22:37:WU00:FS00:Assigned to work server 171.64.65.75
20:22:37:WU00:FS00:Requesting new work unit for slot 00: READY smp:10 from 171.64.65.75
20:22:37:WU00:FS00:Connecting to 171.64.65.75:8080
20:22:37:WU00:FS00:Downloading 951.70KiB
20:22:41:WU00:FS00:Download complete
20:22:41:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10140 run:27 clone:4 gen:7 core:0xa3 unit:0x0000000b0a3b1e6f5149ed708a82ac8c
20:22:41:WU00:FS00:Starting
20:22:41:WU00:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 702 -lifeline 7016 -checkpoint 15 -np 10
20:22:41:WU00:FS00:Started FahCore on PID 7104
20:22:41:WU00:FS00:Core PID:5276
20:22:41:WU00:FS00:FahCore 0xa3 started
20:22:42:WU00:FS00:0xa3:
20:22:42:WU00:FS00:0xa3:*------------------------------*
20:22:42:WU00:FS00:0xa3:Folding@Home Gromacs SMP Core
20:22:42:WU00:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
20:22:42:WU00:FS00:0xa3:
20:22:42:WU00:FS00:0xa3:Preparing to commence simulation
20:22:42:WU00:FS00:0xa3:- Looking at optimizations...
20:22:42:WU00:FS00:0xa3:- Created dyn
20:22:42:WU00:FS00:0xa3:- Files status OK
20:22:42:WU00:FS00:0xa3:- Expanded 974029 -> 2021624 (decompressed 207.5 percent)
20:22:42:WU00:FS00:0xa3:Called DecompressByteArray: compressed_data_size=974029 data_size=2021624, decompressed_data_size=2021624 diff=0
20:22:42:WU00:FS00:0xa3:- Digital signature verified
20:22:42:WU00:FS00:0xa3:
20:22:42:WU00:FS00:0xa3:Project: 10140 (Run 27, Clone 4, Gen 7)
20:22:42:WU00:FS00:0xa3:
20:22:42:WU00:FS00:0xa3:Assembly optimizations on if available.
20:22:42:WU00:FS00:0xa3:Entering M.D.
20:22:47:WU00:FS00:0xa3:Mapping NT from 10 to 10 
20:22:47:WU00:FS00:0xa3:mdrun returned 255
20:22:47:WU00:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
20:22:47:WU00:FS00:0xa3:Work fraction=0.0000 steps=2000000.
20:22:51:WU00:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
20:22:51:WU00:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
20:22:51:WU00:FS00:0xa3:- Writing 641 bytes of core data to disk...
20:22:51:WU00:FS00:0xa3:Done: 129 -> 144 (compressed to 111.6 percent)
20:22:51:WU00:FS00:0xa3:  ... Done.
20:22:56:WU00:FS00:0xa3:
20:22:56:WU00:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
20:22:56:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
20:22:56:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:10140 run:27 clone:4 gen:7 core:0xa3 unit:0x0000000b0a3b1e6f5149ed708a82ac8c
20:22:56:WU00:FS00:Uploading 656B to 171.64.65.75
20:22:56:WU00:FS00:Connecting to 171.64.65.75:8080
20:22:57:WU00:FS00:Upload complete
20:22:57:WU00:FS00:Server responded WORK_ACK (400)
20:22:57:WU00:FS00:Cleaning up
20:23:17:WU00:FS00:Connecting to assign3.stanford.edu:8080
20:23:17:WU00:FS00:News: Welcome to Folding@Home
20:23:17:WU00:FS00:Assigned to work server 171.64.65.75
20:23:17:WU00:FS00:Requesting new work unit for slot 00: READY smp:10 from 171.64.65.75
20:23:17:WU00:FS00:Connecting to 171.64.65.75:8080
20:23:18:WU00:FS00:Downloading 946.65KiB
20:23:22:WU00:FS00:Download complete
20:23:22:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10140 run:25 clone:9 gen:7 core:0xa3 unit:0x0000000a0a3b1e6f5149ed6a2c08ee6d
20:23:22:WU00:FS00:Starting
20:23:22:WU00:FS00:Running FahCore: "E:\V7 folding\FAHClient/FAHCoreWrapper.exe" "E:/V7 folding/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 702 -lifeline 7016 -checkpoint 15 -np 10
20:23:22:WU00:FS00:Started FahCore on PID 4484
20:23:22:WU00:FS00:Core PID:924
20:23:22:WU00:FS00:FahCore 0xa3 started
20:23:22:WU00:FS00:0xa3:
20:23:22:WU00:FS00:0xa3:*------------------------------*
20:23:22:WU00:FS00:0xa3:Folding@Home Gromacs SMP Core
20:23:22:WU00:FS00:0xa3:Version 2.27 (Dec. 15, 2010)
20:23:22:WU00:FS00:0xa3:
20:23:22:WU00:FS00:0xa3:Preparing to commence simulation
20:23:22:WU00:FS00:0xa3:- Looking at optimizations...
20:23:22:WU00:FS00:0xa3:- Created dyn
20:23:22:WU00:FS00:0xa3:- Files status OK
20:23:22:WU00:FS00:0xa3:- Expanded 968857 -> 2021624 (decompressed 208.6 percent)
20:23:22:WU00:FS00:0xa3:Called DecompressByteArray: compressed_data_size=968857 data_size=2021624, decompressed_data_size=2021624 diff=0
20:23:22:WU00:FS00:0xa3:- Digital signature verified
20:23:22:WU00:FS00:0xa3:
20:23:22:WU00:FS00:0xa3:Project: 10140 (Run 25, Clone 9, Gen 7)
20:23:22:WU00:FS00:0xa3:
20:23:22:WU00:FS00:0xa3:Assembly optimizations on if available.
20:23:22:WU00:FS00:0xa3:Entering M.D.
20:23:28:WU00:FS00:0xa3:Mapping NT from 10 to 10 
20:23:28:WU00:FS00:0xa3:mdrun returned 255
20:23:28:WU00:FS00:0xa3:Going to send back what have done -- stepsTotalG=2000000
20:23:28:WU00:FS00:0xa3:Work fraction=0.0000 steps=2000000.
20:23:32:WU00:FS00:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
20:23:32:WU00:FS00:0xa3:logfile size: 0 info=0 bed=0 hdr=25
20:23:32:WU00:FS00:0xa3:- Writing 641 bytes of core data to disk...
20:23:32:WU00:FS00:0xa3:Done: 129 -> 144 (compressed to 111.6 percent)
20:23:32:WU00:FS00:0xa3:  ... Done.
20:23:36:WU00:FS00:0xa3:
20:23:36:WU00:FS00:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
20:23:37:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
20:23:37:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:10140 run:25 clone:9 gen:7 core:0xa3 unit:0x0000000a0a3b1e6f5149ed6a2c08ee6d
20:23:37:WU00:FS00:Uploading 656B to 171.64.65.75
20:23:37:WU00:FS00:Connecting to 171.64.65.75:8080
20:23:37:WU00:FS00:Upload complete
20:23:37:WU00:FS00:Server responded WORK_ACK (400)
20:23:37:WU00:FS00:Cleaning up
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: 10138/10139/10140 EUE

Post by Joe_H »

Best I can suggest at this point is to change your SMP setting from 10. A setting of 8 should work, and since you are just reducing the threads supported by HT the TPF should not increase as much.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 10138/10139/10140 EUE

Post by bruce »

wrinvert wrote:got another run of these on 10/12.... im starting to wonder how close this is getting to effecting my passkey.
The 80% success rate of your passkey is not currently in danger, but I do agree that using 8 would be a good idea.
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: 10138/10139/10140 EUE

Post by PantherX »

Please note that I have notified the appropriate PG Members so hopefully, it will be resolved.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
wrinvert
Posts: 16
Joined: Sat Oct 22, 2011 8:24 am

Re: 10138/10139/10140 EUE

Post by wrinvert »

It is running okay at 12/12, it just doesn't like 10/12 for some reason. maybe its because on 10/12 its using 5cores 5hyperthreads and it don't like odd numbers?

edit: my 920 and 3770k both are running 10139's fine on smp6/8 :e?:
Humanoid1
Posts: 17
Joined: Mon Jun 04, 2012 1:33 pm
Hardware configuration: CPU: Xeon X5650 @ 4GHz
Gfx: Asus 7950 Direct CUII TOP @ 1.05GHz
RAM: Tri Channel 12GB Kingston LoVo 1,600MHz 8-9-8-21 1T
MB: Gigabyte X58A-OC
OS: Win 7 Pro 64bit

Housten, we have a 10138,9,40 Problem!

Post by Humanoid1 »

Right, I believe I have found the solution. But will post this here as information for any who are interested.

I am Running :
Folding@home Client 7.3.6
Win7 Pro 64bit
Xeon X5650 @ 4GHz SMP11 (fails no other WU than those listed below that I have ever noticed)
Asus 7950 Direct CUII TOP

Now with this new client auto setting -1 and therefor SMP11 and having read some comments about its release streamlining installation and I believe SMP use to GPU installed etc
...I was trusting this new 7.3.6 client to take/(work with) only WU's that were happy with an odd number of SMP cores and being a prime number at that.

I have failed 10 of the following WU's in the last 10 hours and worried I might well lose my QRB unluckily during this years Chimp Challenge, so of course had a closer look.

The WU's in Question insta-fail every time:

10138
10139
10140

I had noticed one or two these on rare occasions before and had put it down to a new WU recently released having teething problems.
Today I just had a non-stop string of these, causing my SMP folding to cease as Failed.

Typical fail event:

Code: Select all

08:55:15:WU02:FS01:News: Welcome to Folding@Home
08:55:15:WU02:FS01:Assigned to work server 171.64.65.75
08:55:15:WU02:FS01:Requesting new work unit for slot 01: READY cpu:11 from 171.64.65.75
08:55:15:WU02:FS01:Connecting to 171.64.65.75:8080
08:55:16:WU02:FS01:Downloading 960.62KiB
08:55:20:WU02:FS01:Download complete
08:55:20:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:10138 run:41 clone:9 gen:6 core:0xa3 unit:0x000000080a3b1e6f5147496764eb78bc
08:55:20:WU02:FS01:Starting
08:55:20:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Humanoid1/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe -dir 02 -suffix 01 -version 703 -lifeline 9904 -checkpoint 15 -np 11
08:55:20:WU02:FS01:Started FahCore on PID 9152
08:55:20:WU02:FS01:Core PID:10056
08:55:20:WU02:FS01:FahCore 0xa3 started
08:55:21:WU02:FS01:0xa3:
08:55:21:WU02:FS01:0xa3:*------------------------------*
08:55:21:WU02:FS01:0xa3:Folding@Home Gromacs SMP Core
08:55:21:WU02:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
08:55:21:WU02:FS01:0xa3:
08:55:21:WU02:FS01:0xa3:Preparing to commence simulation
08:55:21:WU02:FS01:0xa3:- Looking at optimizations...
08:55:21:WU02:FS01:0xa3:- Created dyn
08:55:21:WU02:FS01:0xa3:- Files status OK
08:55:21:WU02:FS01:0xa3:- Expanded 983162 -> 2035048 (decompressed 206.9 percent)
08:55:21:WU02:FS01:0xa3:Called DecompressByteArray: compressed_data_size=983162 data_size=2035048, decompressed_data_size=2035048 diff=0
08:55:21:WU02:FS01:0xa3:- Digital signature verified
08:55:21:WU02:FS01:0xa3:
08:55:21:WU02:FS01:0xa3:Project: 10138 (Run 41, Clone 9, Gen 6)
08:55:21:WU02:FS01:0xa3:
08:55:21:WU02:FS01:0xa3:Assembly optimizations on if available.
08:55:21:WU02:FS01:0xa3:Entering M.D.
08:55:27:WU02:FS01:0xa3:Mapping NT from 11 to 10 
08:55:27:WU02:FS01:0xa3:mdrun returned 255
08:55:27:WU02:FS01:0xa3:Going to send back what have done -- stepsTotalG=2000000
08:55:27:WU02:FS01:0xa3:Work fraction=0.0000 steps=2000000.
08:55:31:WU02:FS01:0xa3:logfile size=0 infoLength=0 edr=0 trr=25
08:55:31:WU02:FS01:0xa3:logfile size: 0 info=0 bed=0 hdr=25
08:55:31:WU02:FS01:0xa3:- Writing 641 bytes of core data to disk...
08:55:31:WU02:FS01:0xa3:Done: 129 -> 144 (compressed to 111.6 percent)
08:55:31:WU02:FS01:0xa3:  ... Done.
08:55:31:WU02:FS01:0xa3:
08:55:31:WU02:FS01:0xa3:Folding@home Core Shutdown: EARLY_UNIT_END
08:55:31:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:55:31:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:10138 run:41 clone:9 gen:6 core:0xa3 unit:0x000000080a3b1e6f5147496764eb78bc
08:55:31:WU02:FS01:Uploading 656B to 171.64.65.75
08:55:31:WU02:FS01:Connecting to 171.64.65.75:8080
08:55:32:WU02:FS01:Upload complete
08:55:32:WU02:FS01:Server responded WORK_ACK (400)
08:55:32:WU02:FS01:Cleaning up
Obviously I am left with the conclusion that this newer 7.3.6 client has not been coded to fix this issue meaning anyone running with default settings could be failing all such odd/prime number sensitive WU's.
Other experienced long time folders from my home OCF forum confirmed this suspicion.
Now having restarted running SMP10 I just have to wait to receive another of these number sensitive WU's to be 100% sure.

That and hope I did not lose my QRB in the last days of Chimp Challenge! :ewink:

Mod Edit: Thread Merged - PantherX
EXT64
Posts: 323
Joined: Mon Apr 09, 2012 11:54 pm

Re: Housten, we have a 10138,9,40 Problem!

Post by EXT64 »

I am afraid it fails on SMP 10 as well - Must go down to SMP 8 if you want it to work it appears. Hopefully they will restrict the client soon.

Mod Edit: Thread Merged - PantherX
Post Reply