GPU assignment failure? {Old GPUs not supported]

Post requests to add new GPUs to the official whitelist here.

Moderators: Site Moderators, FAHC Science Team

Post Reply
compdewd
Posts: 165
Joined: Sat Jun 09, 2012 6:56 am
Hardware configuration: [1] Debian 8 64-bit: EVGA NVIDIA GTX 650 Ti, MSI NVIDIA GTX 460, AMD FX-8120
[2] Windows 7 64-bit: MSI NVIDIA GTX 460, AMD Phenom II X4
Location: Cincinnati, Ohio, USA
Contact:
Contact compdewd

GPU assignment failure? {Old GPUs not supported]

Post by compdewd »

Hello everyone, I seem to be having a problem downloading GPU work units. I don't know if this is a Stanford problem or a problem on my end, but for now I assume it's my fault. I recently searched the GPU whitelist for GeForce 6100, which is one of my computer's integrated graphics, and downloaded the GPUs.txt. (Yes, I'm sure this isn't a very good GPU to fold on, but I want to give everything I can!) Anyway at first I tried it with the GPU index at "-1" and the client told me basically that there were no detected applicable GPUs (I forget exactly what it said). Then I tried again with the index at "0" and it accepted the slot. The only problem now is that apparently there are no GPU work units to give out? Hopefully that's not true and it's just me ;) Here's the log if it helps:

Code: Select all

*********************** Log Started 2012-06-09T06:51:10Z ***********************
06:51:10:************************* Folding@home Client *************************
06:51:10:      Website: http://folding.stanford.edu/
06:51:10:    Copyright: (c) 2009-2012 Stanford University
06:51:10:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
06:51:10:         Args: --lifeline 1716 --command-port=36330
06:51:10:       Config: C:/Documents and Settings/Patrick/Application
06:51:10:               Data/FAHClient/config.xml
06:51:10:******************************** Build ********************************
06:51:10:      Version: 7.1.52
06:51:10:         Date: Mar 20 2012
06:51:10:         Time: 19:37:42
06:51:10:      SVN Rev: 3515
06:51:10:       Branch: fah/trunk/client
06:51:10:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
06:51:10:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
06:51:10:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
06:51:10:     Platform: win32 XP
06:51:10:         Bits: 32
06:51:10:         Mode: Release
06:51:10:******************************* System ********************************
06:51:10:          CPU: AMD Sempron(tm) Processor 3100+
06:51:10:       CPU ID: AuthenticAMD Family 15 Model 44 Stepping 2
06:51:10:         CPUs: 1
06:51:10:       Memory: 478.43MiB
06:51:10:  Free Memory: 141.68MiB
06:51:10:      Threads: WINDOWS_THREADS
06:51:10:   On Battery: false
06:51:10:   UTC offset: -4
06:51:10:          PID: 3328
06:51:10:          CWD: C:/Documents and Settings/Patrick/Application Data/FAHClient
06:51:10:           OS: Microsoft Windows XP Service Pack 3
06:51:10:      OS Arch: X86
06:51:10:         GPUs: 1
06:51:10:        GPU 0: UNSUPPORTED: C51G [GeForce 6100]
06:51:10:         CUDA: Not detected
06:51:10:Win32 Service: false
06:51:10:***********************************************************************
06:51:10:<config>
06:51:10:  <service-description v='Folding@home Client'/>
06:51:10:  <service-restart v='true'/>
06:51:10:  <service-restart-delay v='5000'/>
06:51:10:
06:51:10:  <!-- Client Control -->
06:51:10:  <cycle-rate v='4'/>
06:51:10:  <cycles v='-1'/>
06:51:10:  <data-directory v='.'/>
06:51:10:  <disable-project-lookup v='false'/>
06:51:10:  <exec-directory v='C:\Program Files\FAHClient'/>
06:51:10:  <exit-when-done v='false'/>
06:51:10:  <threads v='4'/>
06:51:10:
06:51:10:  <!-- Configuration -->
06:51:10:  <config-rotate v='true'/>
06:51:10:  <config-rotate-dir v='configs'/>
06:51:10:  <config-rotate-max v='16'/>
06:51:10:
06:51:10:  <!-- Debugging -->
06:51:10:  <assignment-servers>
06:51:10:    assign3.stanford.edu:8080 assign4.stanford.edu:80
06:51:10:  </assignment-servers>
06:51:10:  <capture-directory v='capture'/>
06:51:10:  <capture-sockets v='false'/>
06:51:10:  <debug-sockets v='false'/>
06:51:10:  <exception-locations v='true'/>
06:51:10:  <gpu-assignment-servers>
06:51:10:    assign-GPU.stanford.edu:80 assign-GPU.stanford.edu:8080
06:51:10:  </gpu-assignment-servers>
06:51:10:  <stack-traces v='false'/>
06:51:10:
06:51:10:  <!-- Error Handling -->
06:51:10:  <max-slot-errors v='5'/>
06:51:10:  <max-unit-errors v='5'/>
06:51:10:
06:51:10:  <!-- FahCore Control -->
06:51:10:  <checkpoint v='10'/>
06:51:10:  <core-dir v='cores'/>
06:51:10:  <core-priority v='idle'/>
06:51:10:  <cpu-affinity v='false'/>
06:51:10:  <cpu-usage v='100'/>
06:51:10:  <no-assembly v='false'/>
06:51:10:
06:51:10:  <!-- Folding Slot Configuration -->
06:51:10:  <client-subtype v='STDCLI'/>
06:51:10:  <client-type v='normal'/>
06:51:10:  <cpu-species v='X86_AMD'/>
06:51:10:  <cpu-type v='X86'/>
06:51:10:  <cpus v='-1'/>
06:51:10:  <cuda-index v='0'/>
06:51:10:  <gpu v='false'/>
06:51:10:  <gpu-usage v='100'/>
06:51:10:  <max-packet-size v='normal'/>
06:51:10:  <opencl-index v='0'/>
06:51:10:  <os-species v='WIN_XP'/>
06:51:10:  <os-type v='WIN32'/>
06:51:10:  <project-key v='0'/>
06:51:10:  <smp v='false'/>
06:51:10:
06:51:10:  <!-- Logging -->
06:51:10:  <log v='log.txt'/>
06:51:10:  <log-color v='false'/>
06:51:10:  <log-crlf v='true'/>
06:51:10:  <log-date v='false'/>
06:51:10:  <log-date-periodically v='21600'/>
06:51:10:  <log-debug v='true'/>
06:51:10:  <log-domain v='false'/>
06:51:10:  <log-header v='true'/>
06:51:10:  <log-level v='true'/>
06:51:10:  <log-no-info-header v='true'/>
06:51:10:  <log-redirect v='false'/>
06:51:10:  <log-rotate v='true'/>
06:51:10:  <log-rotate-dir v='logs'/>
06:51:10:  <log-rotate-max v='16'/>
06:51:10:  <log-short-level v='false'/>
06:51:10:  <log-simple-domains v='true'/>
06:51:10:  <log-thread-id v='false'/>
06:51:10:  <log-thread-prefix v='true'/>
06:51:10:  <log-time v='true'/>
06:51:10:  <log-to-screen v='true'/>
06:51:10:  <log-truncate v='false'/>
06:51:10:  <verbosity v='5'/>
06:51:10:
06:51:10:  <!-- Network -->
06:51:10:  <proxy v=':8080'/>
06:51:10:  <proxy-enable v='false'/>
06:51:10:  <proxy-pass v=''/>
06:51:10:  <proxy-user v=''/>
06:51:10:
06:51:10:  <!-- Process Control -->
06:51:10:  <child v='false'/>
06:51:10:  <daemon v='false'/>
06:51:10:  <pid v='false'/>
06:51:10:  <pid-file v='Folding@home Client.pid'/>
06:51:10:  <respawn v='false'/>
06:51:10:  <service v='false'/>
06:51:10:
06:51:10:  <!-- Remote Command Server -->
06:51:10:  <command-address v='0.0.0.0'/>
06:51:10:  <command-allow v='127.0.0.1'/>
06:51:10:  <command-allow-no-pass v='127.0.0.1'/>
06:51:10:  <command-deny v='0.0.0.0/0'/>
06:51:10:  <command-deny-no-pass v='0.0.0.0/0'/>
06:51:10:  <command-port v='36330'/>
06:51:10:
06:51:10:  <!-- Slot Control -->
06:51:10:  <max-shutdown-wait v='60'/>
06:51:10:  <pause-on-battery v='false'/>
06:51:10:  <pause-on-start v='false'/>
06:51:10:
06:51:10:  <!-- User Information -->
06:51:10:  <machine-id v='0'/>
06:51:10:  <passkey v='********************************'/>
06:51:10:  <team v='0'/>
06:51:10:  <user v='compdewd'/>
06:51:10:
06:51:10:  <!-- Work Unit Control -->
06:51:10:  <dump-after-deadline v='true'/>
06:51:10:  <max-queue v='16'/>
06:51:10:  <max-units v='0'/>
06:51:10:  <next-unit-percentage v='99'/>
06:51:10:
06:51:10:  <!-- Folding Slots -->
06:51:10:  <slot id='0' type='UNIPROCESSOR'/>
06:51:10:</config>
06:51:10:Trying to access database...
06:51:11:Successfully acquired database lock
06:51:11:Enabled folding slot 00: READY uniprocessor
06:51:12:Started thread 1 on PID 3328
06:51:12:Started thread 3 on PID 3328
06:51:12:Started thread 4 on PID 3328
06:51:12:Started thread 5 on PID 3328
06:51:12:Started thread 6 on PID 3328
06:51:12:WU00:FS00:Starting
06:51:12:WU00:FS00:Running FahCore: "C:\Program Files\FAHClient/FAHCoreWrapper.exe" "C:/Documents and Settings/Patrick/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_a4.fah/FahCore_a4.exe" -dir 00 -suffix 01 -version 701 -lifeline 3328 -checkpoint 10
06:51:14:WU00:FS00:Started FahCore on PID 3908
06:51:14:Started thread 7 on PID 3328
06:51:22:WU00:FS00:Core PID:1228
06:51:22:WU00:FS00:FahCore 0xa4 started
06:51:23:WU00:FS00:0xa4:
06:51:23:WU00:FS00:0xa4:*------------------------------*
06:51:23:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
06:51:23:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
06:51:23:WU00:FS00:0xa4:
06:51:23:WU00:FS00:0xa4:Preparing to commence simulation
06:51:23:WU00:FS00:0xa4:- Looking at optimizations...
06:51:23:WU00:FS00:0xa4:- Files status OK
06:51:23:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
06:51:23:Started thread 8 on PID 3328
06:51:24:WU00:FS00:0xa4:- Expanded 885857 -> 2026188 (decompressed 228.7 percent)
06:51:24:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=885857 data_size=2026188, decompressed_data_size=2026188 diff=0
06:51:24:WU00:FS00:0xa4:- Digital signature verified
06:51:24:WU00:FS00:0xa4:
06:51:24:WU00:FS00:0xa4:Project: 8013 (Run 230, Clone 39, Gen 14)
06:51:24:WU00:FS00:0xa4:
06:51:24:WU00:FS00:0xa4:Assembly optimizations on if available.
06:51:24:WU00:FS00:0xa4:Entering M.D.
06:51:31:WU00:FS00:0xa4:Using Gromacs checkpoints
06:51:31:WU00:FS00:0xa4:Mapping NT from 1 to 1 
06:51:33:WU00:FS00:0xa4:Resuming from checkpoint
06:51:33:WU00:FS00:0xa4:Verified 00/wudata_01.log
06:51:33:WU00:FS00:0xa4:Verified 00/wudata_01.trr
06:51:33:WU00:FS00:0xa4:Verified 00/wudata_01.xtc
06:51:33:WU00:FS00:0xa4:Verified 00/wudata_01.edr
06:51:35:WU00:FS00:0xa4:Completed 91210 out of 250000 steps  (36%)
06:51:48:Saving configuration to config.xml
06:51:48:<config>
06:51:48:  <!-- FahCore Control -->
06:51:48:  <checkpoint v='10'/>
06:51:48:
06:51:48:  <!-- Folding Slot Configuration -->
06:51:48:  <smp v='false'/>
06:51:48:
06:51:48:  <!-- Logging -->
06:51:48:  <verbosity v='5'/>
06:51:48:
06:51:48:  <!-- Network -->
06:51:48:  <proxy v=':8080'/>
06:51:48:
06:51:48:  <!-- User Information -->
06:51:48:  <passkey v='********************************'/>
06:51:48:  <user v='compdewd'/>
06:51:48:
06:51:48:  <!-- Folding Slots -->
06:51:48:  <slot id='0' type='UNIPROCESSOR'/>
06:51:48:</config>
06:52:06:Adding folding slot 01: READY gpu:0:"C51G [GeForce 6100]"
06:52:07:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
06:52:07:Saving configuration to config.xml
06:52:07:<config>
06:52:07:  <!-- FahCore Control -->
06:52:07:  <checkpoint v='10'/>
06:52:07:
06:52:07:  <!-- Folding Slot Configuration -->
06:52:07:  <smp v='false'/>
06:52:07:
06:52:07:  <!-- Logging -->
06:52:07:  <verbosity v='5'/>
06:52:07:
06:52:07:  <!-- Network -->
06:52:07:  <proxy v=':8080'/>
06:52:07:
06:52:07:  <!-- User Information -->
06:52:07:  <passkey v='********************************'/>
06:52:07:  <user v='compdewd'/>
06:52:07:
06:52:07:  <!-- Folding Slots -->
06:52:07:  <slot id='0' type='UNIPROCESSOR'/>
06:52:07:  <slot id='1' type='GPU'>
06:52:07:    <gpu-index v='0'/>
06:52:07:  </slot>
06:52:07:</config>
06:52:07:WU01:FS01:News: Welcome to Folding@Home
06:52:07:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
06:52:07:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
06:52:08:WU01:FS01:News: Welcome to Folding@Home
06:52:08:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
06:52:08:ERROR:WU01:FS01:Exception: Could not get an assignment
06:52:08:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
06:52:08:WU01:FS01:News: Welcome to Folding@Home
06:52:08:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
06:52:08:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
06:52:08:WU01:FS01:News: Welcome to Folding@Home
06:52:08:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
06:52:08:ERROR:WU01:FS01:Exception: Could not get an assignment
06:53:08:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
06:53:08:WU01:FS01:News: Welcome to Folding@Home
06:53:08:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
06:53:08:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
06:53:08:WU01:FS01:News: Welcome to Folding@Home
06:53:08:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
06:53:08:ERROR:WU01:FS01:Exception: Could not get an assignment
06:54:45:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
06:54:45:WU01:FS01:News: Welcome to Folding@Home
06:54:45:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
06:54:45:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
06:54:46:WU01:FS01:News: Welcome to Folding@Home
06:54:46:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
06:54:46:ERROR:WU01:FS01:Exception: Could not get an assignment
06:57:22:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
06:57:22:WU01:FS01:News: Welcome to Folding@Home
06:57:23:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
06:57:23:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
06:57:23:WU01:FS01:News: Welcome to Folding@Home
06:57:23:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
06:57:23:ERROR:WU01:FS01:Exception: Could not get an assignment
07:01:37:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
07:01:37:WU01:FS01:News: Welcome to Folding@Home
07:01:37:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
07:01:37:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
07:01:37:WU01:FS01:News: Welcome to Folding@Home
07:01:37:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
07:01:37:ERROR:WU01:FS01:Exception: Could not get an assignment
07:05:20:WU00:FS00:0xa4:Completed 92500 out of 250000 steps  (37%)
07:08:28:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
07:08:28:WU01:FS01:News: Welcome to Folding@Home
07:08:28:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:80': Empty work server assignment
07:08:28:WU01:FS01:Connecting to assign-GPU.stanford.edu:8080
07:08:28:WU01:FS01:News: Welcome to Folding@Home
07:08:28:WARNING:WU01:FS01:Failed to get assignment from 'assign-GPU.stanford.edu:8080': Empty work server assignment
07:08:28:ERROR:WU01:FS01:Exception: Could not get an assignment
Top
compdewd
Posts: 165
Joined: Sat Jun 09, 2012 6:56 am
Hardware configuration: [1] Debian 8 64-bit: EVGA NVIDIA GTX 650 Ti, MSI NVIDIA GTX 460, AMD FX-8120
[2] Windows 7 64-bit: MSI NVIDIA GTX 460, AMD Phenom II X4
Location: Cincinnati, Ohio, USA
Contact:
Contact compdewd

Re: GPU assignment failure?

Post by compdewd »

This is also occurring on my GeForce 8400GS card in a separate computer. I also had to manually set the index to "0". I've never had experience with GPU folding before so hopefully someone can point out what I'm doing wrong or if this is happening to anyone else. Thanks a ton for your help!

PS. Sorry if this is a misplaced topic. I wasn't sure where it would be best placed.
Top
Zagen30
Posts: 823
Joined: Tue Mar 25, 2008 12:45 am
Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU

4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit

Re: GPU assignment failure?

Post by Zagen30 »

Despite it being on the whitelist, the 6100 is not actually supported. The earliest supported Nvidia cards are from the 8000 series.

I'm not sure if the Pande Group ever specifically said that the whitelist was just for folding-capable cards; considering the vast quantity of non-folding-capable cards on it (all the way back to the ATI Rage XL and Nvidia Riva TNT), I'm guessing they just want a list of all known GPUs and their Device IDs, with the servers figuring out whether or not they're capable of processing work.

As for the 8400, I'm less sure of what the problem there is. I believe some of the 8400s aren't supported, but I'm not 100% on that and I don't know if that applies to your card. If you could post the System portion of the log from that computer it might help.
Image
Top
gwildperson
Posts: 450
Joined: Tue Dec 04, 2007 8:36 pm

Re: GPU assignment failure?

Post by gwildperson »

Zagen30 wrote:Despite it being on the whitelist, the 6100 is not actually supported. The earliest supported Nvidia cards are from the 8000 series.
Actually, it's not on the whitelist. It is on GPUs.txt but it's specifically blacklisted. That's why it says UNSUPPORTED: C51G [GeForce 6100]. The 6100 cannot be used for folding. It's just too weak.
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: GPU assignment failure?

Post by 7im »

Yep, GPUs.txt is both Whitelist and Blacklist.

Black listed...
0x107d:0x2a68:::G71 [GeForce 7950 GT]

White listed...
0x107d:0x2ab0:2:1:G92 [GeForce 8800 GT]

See the difference in the format?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
Naki
Posts: 50
Joined: Thu Dec 13, 2007 1:10 pm
Location: Bulgaria, EU
Contact:
Contact Naki

Re: GPU assignment failure?

Post by Naki »

Can I fold with NVidia GeForce 6800 GT? Running on Windows 2000 Pro.
If not, would it work (just in general) on WinXP?
Top
gwildperson
Posts: 450
Joined: Tue Dec 04, 2007 8:36 pm

Re: GPU assignment failure?

Post by gwildperson »

Windows can use a lot of GPUs which are too weak for either FAH or for serious video games
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: GPU assignment failure?

Post by 7im »

No to Windows 2k. Yes to XP or newer.

IIRC, 8800 or newer. I'm not sure if the 6800 is newer or not. To be sure, check the list of supported GPUs linked in the requirements section of the install guide.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
compdewd
Posts: 165
Joined: Sat Jun 09, 2012 6:56 am
Hardware configuration: [1] Debian 8 64-bit: EVGA NVIDIA GTX 650 Ti, MSI NVIDIA GTX 460, AMD FX-8120
[2] Windows 7 64-bit: MSI NVIDIA GTX 460, AMD Phenom II X4
Location: Cincinnati, Ohio, USA
Contact:
Contact compdewd

Re: GPU assignment failure?

Post by compdewd »

Thank you all for your replies!

Here is the system info log for the 8400GS system:

Code: Select all

*********************** Log Started 2012-06-09T16:08:16Z ***********************
16:08:16:************************* Folding@home Client *************************
16:08:16:      Website: http://folding.stanford.edu/
16:08:16:    Copyright: (c) 2009-2012 Stanford University
16:08:16:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
16:08:16:         Args: --lifeline 1424 --command-port=36330
16:08:16:       Config: C:/Documents and Settings/Administrator/Application
16:08:16:               Data/FAHClient/config.xml
16:08:16:******************************** Build ********************************
16:08:16:      Version: 7.1.52
16:08:16:         Date: Mar 20 2012
16:08:16:         Time: 19:37:42
16:08:16:      SVN Rev: 3515
16:08:16:       Branch: fah/trunk/client
16:08:16:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
16:08:16:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
16:08:16:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
16:08:16:     Platform: win32 XP
16:08:16:         Bits: 32
16:08:16:         Mode: Release
16:08:16:******************************* System ********************************
16:08:16:          CPU: AMD FX(tm)-8120 Eight-Core Processor
16:08:16:       CPU ID: AuthenticAMD Family 21 Model 1 Stepping 2
16:08:16:         CPUs: 8
16:08:16:       Memory: 3.99GiB
16:08:16:  Free Memory: 3.43GiB
16:08:16:      Threads: WINDOWS_THREADS
16:08:16:   On Battery: false
16:08:16:   UTC offset: -4
16:08:16:          PID: 2948
16:08:16:          CWD: C:/Documents and Settings/Administrator/Application
16:08:16:               Data/FAHClient
16:08:16:           OS: Microsoft Windows XP Service Pack 2
16:08:16:      OS Arch: AMD64
16:08:16:         GPUs: 1
16:08:16:        GPU 0: UNSUPPORTED: G84 [GeForce 8400 GS]
16:08:16:         CUDA: 1.1
16:08:16:  CUDA Driver: 4020
16:08:16:Win32 Service: false
16:08:16:***********************************************************************
That is strange if it is true that some 8400s don't work, but if it helps, the card was manufactured by Zotac.

7im, unfortunately that format difference seems pretty subtle for determining between two very different things imo
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: GPU assignment failure?

Post by 7im »

The "unsupported" message in the log helps to make that distinction.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
compdewd
Posts: 165
Joined: Sat Jun 09, 2012 6:56 am
Hardware configuration: [1] Debian 8 64-bit: EVGA NVIDIA GTX 650 Ti, MSI NVIDIA GTX 460, AMD FX-8120
[2] Windows 7 64-bit: MSI NVIDIA GTX 460, AMD Phenom II X4
Location: Cincinnati, Ohio, USA
Contact:
Contact compdewd

Re: GPU assignment failure?

Post by compdewd »

Yes, my bad 7im, I thought the 8400 was supported. I didn't see your post before I posted last time.

Thank you all!
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: GPU assignment failure?

Post by 7im »

Not bad, no. I agree with you. The format difference is too small. I've made a recommendation to improve it, but we'll see what happens...
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
compdewd
Posts: 165
Joined: Sat Jun 09, 2012 6:56 am
Hardware configuration: [1] Debian 8 64-bit: EVGA NVIDIA GTX 650 Ti, MSI NVIDIA GTX 460, AMD FX-8120
[2] Windows 7 64-bit: MSI NVIDIA GTX 460, AMD Phenom II X4
Location: Cincinnati, Ohio, USA
Contact:
Contact compdewd

Re: GPU assignment failure?

Post by compdewd »

I am running my 8400 with FAH GPU Tracker V2 currently, and it looks pretty good to me! :D
Top
meligaletiko
Posts: 1
Joined: Sun Sep 23, 2012 12:17 pm

Re: GPU assignment failure? {Old GPUs not supported]

Post by meligaletiko »

Hi guys,

I have been contributing to the project and i'm using fah v7 on mac os x 10.8. I have a macbook pro with a dedicated graphic card nvidia geforce 9600m GT.
THe client is not able to download work for the gpu. i have the same error reported in there. I have already downloaded GPUs.txt and my card is whitelisted.

Information on GPUs.txt : 0x10de:0x0647:2:1:G96 [GeForce 9600M GT]

Can you help me?
Top
bollix47
Posts: 2959
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: GPU assignment failure? {Old GPUs not supported]

Post by bollix47 »

Welcome to the folding support forum meligaletiko!

Sorry to report that at this time there is no core for running the GPU on the mac os. The current v7 client does allow for the option but without a core there are no work units. The option may be hidden or better controlled during installation in future releases, at least until it is supported. Currently, when that will happen(if ever) is unknown.
Top
Post Reply

Return to “New GPUs (whitelist)”