I have not received credit for yet another WU. Here is the log. Also, what is a reasonable amount of time to wait before following up on the previous WU I reported not getting credit for?
[14:43:43] - Preparing to get new work unit...
[14:43:43] Cleaning up work directory
[14:43:43] + Attempting to get work packet
[14:43:43] Passkey found
[14:43:43] - Connecting to assignment server
[14:43:43] - Successful: assigned to (130.237.232.237).
[14:43:43] + News From Folding@Home: Welcome to Folding@Home
[14:43:43] Loaded queue successfully.
[14:46:38] + Closed connections
[14:46:38]
[14:46:38] + Processing work unit
[14:46:38] Core required: FahCore_a5.exe
[14:46:38] Core found.
[14:46:38] Working on queue slot 06 [November 16 14:46:38 UTC]
[14:46:38] + Working ...
[14:46:38]
[14:46:38] *------------------------------*
[14:46:38] Folding@Home Gromacs SMP Core
[14:46:38] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[14:46:38]
[14:46:38] Preparing to commence simulation
[14:46:38] - Looking at optimizations...
[14:46:38] - Created dyn
[14:46:38] - Files status OK
[14:46:45] - Expanded 57242208 -> 71846524 (decompressed 50.4 percent)
[14:46:45] Called DecompressByteArray: compressed_data_size=57242208 data_size=71846524, decompressed_data_size=71846524 diff=0
[14:46:45] - Digital signature verified
[14:46:45]
[14:46:45] Project: 6903 (Run 3, Clone 19, Gen 4)
[14:46:45]
[14:46:45] Assembly optimizations on if available.
[14:46:45] Entering M.D.
[14:46:53] Mapping NT from 24 to 24
[14:46:58] Completed 0 out of 250000 steps (0%)
[15:24:29] Completed 2500 out of 250000 steps (1%)
[16:01:54] Completed 5000 out of 250000 steps (2%)
[16:39:27] Completed 7500 out of 250000 steps (3%)
[17:16:51] Completed 10000 out of 250000 steps (4%)
[17:54:24] Completed 12500 out of 250000 steps (5%)
[18:31:48] Completed 15000 out of 250000 steps (6%)
[19:09:20] Completed 17500 out of 250000 steps (7%)
[19:46:45] Completed 20000 out of 250000 steps (8%)
[20:24:15] Completed 22500 out of 250000 steps (9%)
[21:01:44] Completed 25000 out of 250000 steps (10%)
[21:39:17] Completed 27500 out of 250000 steps (11%)
[22:16:43] Completed 30000 out of 250000 steps (12%)
[22:54:16] Completed 32500 out of 250000 steps (13%)
[23:31:46] Completed 35000 out of 250000 steps (14%)
[00:09:22] Completed 37500 out of 250000 steps (15%)
[00:46:47] Completed 40000 out of 250000 steps (16%)
[01:24:20] Completed 42500 out of 250000 steps (17%)
[02:01:48] Completed 45000 out of 250000 steps (18%)
[02:39:21] Completed 47500 out of 250000 steps (19%)
[03:16:45] Completed 50000 out of 250000 steps (20%)
[03:54:18] Completed 52500 out of 250000 steps (21%)
[04:31:50] Completed 55000 out of 250000 steps (22%)
[05:09:23] Completed 57500 out of 250000 steps (23%)
[05:46:56] Completed 60000 out of 250000 steps (24%)
[06:24:36] Completed 62500 out of 250000 steps (25%)
[07:02:15] Completed 65000 out of 250000 steps (26%)
[07:39:48] Completed 67500 out of 250000 steps (27%)
[08:17:27] Completed 70000 out of 250000 steps (28%)
[08:55:01] Completed 72500 out of 250000 steps (29%)
[09:33:11] Completed 75000 out of 250000 steps (30%)
[10:11:14] Completed 77500 out of 250000 steps (31%)
[10:49:24] Completed 80000 out of 250000 steps (32%)
[11:27:27] Completed 82500 out of 250000 steps (33%)
[12:05:33] Completed 85000 out of 250000 steps (34%)
[12:43:37] Completed 87500 out of 250000 steps (35%)
[13:21:43] Completed 90000 out of 250000 steps (36%)
[13:59:42] Completed 92500 out of 250000 steps (37%)
[14:37:57] Completed 95000 out of 250000 steps (38%)
[15:15:54] Completed 97500 out of 250000 steps (39%)
[15:53:58] Completed 100000 out of 250000 steps (40%)
[16:31:58] Completed 102500 out of 250000 steps (41%)
[17:10:04] Completed 105000 out of 250000 steps (42%)
[17:48:09] Completed 107500 out of 250000 steps (43%)
[18:26:09] Completed 110000 out of 250000 steps (44%)
[19:04:11] Completed 112500 out of 250000 steps (45%)
[19:42:08] Completed 115000 out of 250000 steps (46%)
[20:20:11] Completed 117500 out of 250000 steps (47%)
[20:58:09] Completed 120000 out of 250000 steps (48%)
[21:36:12] Completed 122500 out of 250000 steps (49%)
[22:14:00] Completed 125000 out of 250000 steps (50%)
[22:51:40] Completed 127500 out of 250000 steps (51%)
[23:29:16] Completed 130000 out of 250000 steps (52%)
[00:06:55] Completed 132500 out of 250000 steps (53%)
[00:44:32] Completed 135000 out of 250000 steps (54%)
[01:22:13] Completed 137500 out of 250000 steps (55%)
[01:59:47] Completed 140000 out of 250000 steps (56%)
[02:37:28] Completed 142500 out of 250000 steps (57%)
[03:15:00] Completed 145000 out of 250000 steps (58%)
[03:52:41] Completed 147500 out of 250000 steps (59%)
[04:30:13] Completed 150000 out of 250000 steps (60%)
[05:07:57] Completed 152500 out of 250000 steps (61%)
[05:45:30] Completed 155000 out of 250000 steps (62%)
[06:23:09] Completed 157500 out of 250000 steps (63%)
[07:00:45] Completed 160000 out of 250000 steps (64%)
[07:38:27] Completed 162500 out of 250000 steps (65%)
[08:16:02] Completed 165000 out of 250000 steps (66%)
[08:53:59] Completed 167500 out of 250000 steps (67%)
[09:31:55] Completed 170000 out of 250000 steps (68%)
[10:10:00] Completed 172500 out of 250000 steps (69%)
[10:48:08] Completed 175000 out of 250000 steps (70%)
[11:26:04] Completed 177500 out of 250000 steps (71%)
[12:04:04] Completed 180000 out of 250000 steps (72%)
[12:41:59] Completed 182500 out of 250000 steps (73%)
[13:20:11] Completed 185000 out of 250000 steps (74%)
[13:58:11] Completed 187500 out of 250000 steps (75%)
[14:36:14] Completed 190000 out of 250000 steps (76%)
[15:14:10] Completed 192500 out of 250000 steps (77%)
[15:52:17] Completed 195000 out of 250000 steps (78%)
[16:30:12] Completed 197500 out of 250000 steps (79%)
[17:08:11] Completed 200000 out of 250000 steps (80%)
[17:46:04] Completed 202500 out of 250000 steps (81%)
[18:23:58] Completed 205000 out of 250000 steps (82%)
[19:01:47] Completed 207500 out of 250000 steps (83%)
[19:39:39] Completed 210000 out of 250000 steps (84%)
[20:17:30] Completed 212500 out of 250000 steps (85%)
[20:55:20] Completed 215000 out of 250000 steps (86%)
[21:33:13] Completed 217500 out of 250000 steps (87%)
[22:11:02] Completed 220000 out of 250000 steps (88%)
[22:48:56] Completed 222500 out of 250000 steps (89%)
[23:26:48] Completed 225000 out of 250000 steps (90%)
[00:04:47] Completed 227500 out of 250000 steps (91%)
[00:42:39] Completed 230000 out of 250000 steps (92%)
[01:20:31] Completed 232500 out of 250000 steps (93%)
[01:58:16] Completed 235000 out of 250000 steps (94%)
[02:36:00] Completed 237500 out of 250000 steps (95%)
[03:13:41] Completed 240000 out of 250000 steps (96%)
[03:51:28] Completed 242500 out of 250000 steps (97%)
[04:29:10] Completed 245000 out of 250000 steps (98%)
[05:06:59] Completed 247500 out of 250000 steps (99%)
[05:44:41] Completed 250000 out of 250000 steps (100%)
[05:45:09] DynamicWrapper: Finished Work Unit: sleep=10000
[05:45:19]
[05:45:19] Finished Work Unit:
[05:45:19] - Reading up to 121622496 from "work/wudata_06.trr": Read 121622496
[05:45:20] trr file hash check passed.
[05:45:20] - Reading up to 108849280 from "work/wudata_06.xtc": Read 108849280
[05:45:21] xtc file hash check passed.
[05:45:21] edr file hash check passed.
[05:45:21] logfile size: 212069
[05:45:21] Leaving Run
[05:45:21] - Writing 230856837 bytes of core data to disk...
[05:46:16] Done: 230856325 -> 222495660 (compressed to 3.3 percent)
[05:46:17] ... Done.
[05:46:42] - Shutting down core
[05:46:42]
[05:46:42] Folding@home Core Shutdown: FINISHED_UNIT
[05:46:45] CoreStatus = 64 (100)
[05:46:45] Sending work to server
That's because that is all there is in the log. I restarted the cleient this morning and it attempted to send it but cannot. The servers are not accepting the uploads. Server 130.237.232.237:8080 and 130.237.232.237:80. This is not the first time this has happend this week.
I am now short around 700,000 points because fo this. Please advise. I still have not had any feedback or F/U from my last post 3 days ago on another WU.
Just curious but what file system are you using ext 3 or ext 4 and how long are you waiting for it to send could you post the rest of the log so we can see what is happening you may be shutting it down before it completely sends. If you are you may corrupt the file or the server may be refusing the connection because it got cut off during the prior upload to it. The server appears to be working OK so I do not think it is on the Server end.
The server is working as I have uploaded 3 6904's to the same server this week including one less than 12 hours ago. It must be some king of local problem but not the problem with ext 4. If it was these two lines would not be seperated by less than a minute
[05:45:21] - Writing 230856837 bytes of core data to disk...
[05:46:16] Done: 230856325 -> 222495660 (compressed to 3.3 percent)
Is it the same machine that is giving you all these problems horvat or are they different rigs?
Hi Grandpa, thanks for getting back to me so quickly. I'm not sure which file system, I am funning the client in native Linux. I waited for ove 12 hours for the WU to send. For some reason I lost part of the log but this pretty much picks up where thw last one left off.
--- Opening Log file [November 19 15:13:13 UTC]
# Linux SMP Console Edition ###################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: /usr/local/fah
Executable: ./fah6
Arguments: -bigadv -smp
[15:13:14] - Ask before connecting: No
[15:13:14] - User name: Horvat (Team 111065)
[15:13:14] - User ID: xxxxxxxxxxxxx
[15:13:14] - Machine ID: 1
[15:13:14]
[15:13:14] Loaded queue successfully.
[15:13:14]
[15:13:14] + Processing work unit
[15:13:14] Core required: FahCore_a5.exe
[15:13:14] Core found.
[15:13:14] Project: 6903 (Run 2, Clone 16, Gen 24)
[15:13:14] + Attempting to send results [November 19 15:13:14 UTC]
[15:13:14] Working on queue slot 07 [November 19 15:13:14 UTC]
[15:13:18] + Working ...
[15:13:18]
[15:13:18] *------------------------------*
[15:13:18] Folding@Home Gromacs SMP Core
[15:13:18] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[15:13:18]
[15:13:18] Preparing to commence simulation
[15:13:18] - Ensuring status. Please wait.
[15:13:28] - Looking at optimizations...
[15:13:28] - Working with standard loops on this execution.
[15:13:28] - Previous termination of core was improper.
[15:13:28] - Files status OK
[15:13:31] - Expanded 24865459 -> 30796292 (decompressed 123.8 percent)
[15:13:31] Called DecompressByteArray: compressed_data_size=24865459 data_size=30796292, decompressed_data_size=30796292 diff=0
[15:13:31] - Digital signature verified
[15:13:31]
[15:13:31] Project: 6901 (Run 14, Clone 6, Gen 99)
[15:13:31]
[15:13:31] Entering M.D.
[15:13:37] Using Gromacs checkpoints
[15:13:39] Mapping NT from 24 to 24
[15:14:00] Resuming from checkpoint
[15:14:04] Verified work/wudata_07.log
[15:14:04] Verified work/wudata_07.trr
[15:14:05] Verified work/wudata_07.xtc
[15:14:05] Verified work/wudata_07.edr
[15:14:05] Completed 86745 out of 250000 steps (34%)
[15:18:43] Completed 87500 out of 250000 steps (35%)
[15:34:04] Completed 90000 out of 250000 steps (36%)
[15:49:24] Completed 92500 out of 250000 steps (37%)
[15:58:11] - Couldn't send HTTP request to server
[15:58:11] + Could not connect to Work Server (results)
[15:58:11] (130.237.232.237:8080)
[15:58:11] + Retrying using alternative port
[16:04:45] Completed 95000 out of 250000 steps (38%)
[16:20:06] Completed 97500 out of 250000 steps (39%)
[16:35:25] Completed 100000 out of 250000 steps (40%)
[16:38:20] - Couldn't send HTTP request to server
[16:38:20] + Could not connect to Work Server (results)
[16:38:20] (130.237.232.237:80)
[16:38:20] - Error: Could not transmit unit 03 (completed November 13) to work server.
[16:38:20] + Attempting to send results [November 19 16:38:20 UTC]
[16:41:30] - Couldn't send HTTP request to server
[16:41:30] + Could not connect to Work Server (results)
[16:41:30] (130.237.165.141:8080)
[16:41:30] + Retrying using alternative port
[16:44:39] - Couldn't send HTTP request to server
[16:44:39] + Could not connect to Work Server (results)
[16:44:39] (130.237.165.141:80)
[16:44:39] Could not transmit unit 03 to Collection server; keeping in queue.
[16:44:39] Project: 6098 (Run 6, Clone 75, Gen 11)
[16:44:40] + Attempting to send results [November 19 16:44:40 UTC]
[16:46:41] + Results successfully sent
[16:46:41] Thank you for your contribution to Folding@Home.
[16:46:41] + Number of Units Completed: 19
[16:46:42] Project: 6903 (Run 11, Clone 0, Gen 53)
[16:46:42] + Attempting to send results [November 19 16:46:42 UTC]
[16:50:46] Completed 102500 out of 250000 steps (41%)
[17:06:05] Completed 105000 out of 250000 steps (42%)
[17:07:34] - Couldn't send HTTP request to server
[17:07:34] + Could not connect to Work Server (results)
[17:07:34] (130.237.232.237:8080)
[17:07:34] + Retrying using alternative port
[17:21:25] Completed 107500 out of 250000 steps (43%)
[17:36:43] Completed 110000 out of 250000 steps (44%)
[17:47:07] + Results successfully sent
[17:47:07] Thank you for your contribution to Folding@Home.
[17:47:07] + Number of Units Completed: 20
[17:47:15] Project: 6903 (Run 3, Clone 19, Gen 4)
[17:47:16] + Attempting to send results [November 19 17:47:16 UTC]
[17:52:06] Completed 112500 out of 250000 steps (45%)
[18:07:26] Completed 115000 out of 250000 steps (46%)
[18:22:47] Completed 117500 out of 250000 steps (47%)
[18:23:02] - Couldn't send HTTP request to server
[18:23:02] + Could not connect to Work Server (results)
[18:23:02] (130.237.232.237:8080)
[18:23:02] + Retrying using alternative port
[18:38:08] Completed 120000 out of 250000 steps (48%)
[18:53:29] Completed 122500 out of 250000 steps (49%)
[19:08:49] Completed 125000 out of 250000 steps (50%)
[19:24:10] Completed 127500 out of 250000 steps (51%)
[19:24:54] - Couldn't send HTTP request to server
[19:24:54] + Could not connect to Work Server (results)
[19:24:54] (130.237.232.237:80)
[19:24:54] - Error: Could not transmit unit 06 (completed November 19) to work server.
[19:24:54] Keeping unit 06 in queue.
[19:39:29] Completed 130000 out of 250000 steps (52%)
[19:54:50] Completed 132500 out of 250000 steps (53%)
[20:10:11] Completed 135000 out of 250000 steps (54%)
[20:25:32] Completed 137500 out of 250000 steps (55%)
[20:40:52] Completed 140000 out of 250000 steps (56%)
[20:56:12] Completed 142500 out of 250000 steps (57%)
[21:11:33] Completed 145000 out of 250000 steps (58%)
[21:26:53] Completed 147500 out of 250000 steps (59%)
--- Opening Log file [November 19 21:47:34 UTC]
# Linux SMP Console Edition ###################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: /usr/local/fah
Executable: ./fah6
Arguments: -bigadv -smp
[21:47:34] - Ask before connecting: No
[21:47:34] - User name: Horvat (Team 111065)
[21:47:34] - User ID: xxxxxxxxxxxxxxxx
[21:47:34] - Machine ID: 1
[21:47:34]
[21:47:35] Loaded queue successfully.
[21:47:35]
[21:47:35] + Processing work unit
[21:47:35] Core required: FahCore_a5.exe
[21:47:35] Core found.
[21:47:35] Project: 6903 (Run 2, Clone 16, Gen 24)
[21:47:35] + Attempting to send results [November 19 21:47:35 UTC]
[21:47:35] Working on queue slot 07 [November 19 21:47:35 UTC]
[21:47:38] + Working ...
[21:47:38]
[21:47:38] *------------------------------*
[21:47:38] Folding@Home Gromacs SMP Core
[21:47:38] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[21:47:38]
[21:47:39] Preparing to commence simulation
[21:47:39] - Ensuring status. Please wait.
[21:47:48] - Looking at optimizations...
[21:47:48] - Working with standard loops on this execution.
[21:47:48] - Previous termination of core was improper.
[21:47:48] - Going to use standard loops.
[21:47:48] - Files status OK
[21:47:51] - Expanded 24865459 -> 30796292 (decompressed 123.8 percent)
[21:47:51] Called DecompressByteArray: compressed_data_size=24865459 data_size=30796292, decompressed_data_size=30796292 diff=0
[21:47:51] - Digital signature verified
[21:47:51]
[21:47:51] Project: 6901 (Run 14, Clone 6, Gen 99)
[21:47:51]
[21:47:51] Entering M.D.
[21:47:57] Using Gromacs checkpoints
[21:48:00] Mapping NT from 24 to 24
[21:48:03] Resuming from checkpoint
[21:48:16] Verified work/wudata_07.log
[21:48:16] Verified work/wudata_07.trr
[21:48:16] Verified work/wudata_07.xtc
[21:48:16] Verified work/wudata_07.edr
[21:48:18] Completed 147810 out of 250000 steps (59%)
[22:01:41] Completed 150000 out of 250000 steps (60%)
[22:14:23] - Couldn't send HTTP request to server
[22:14:23] + Could not connect to Work Server (results)
[22:14:23] (130.237.232.237:8080)
[22:14:23] + Retrying using alternative port
[22:17:01] Completed 152500 out of 250000 steps (61%)
[22:32:21] Completed 155000 out of 250000 steps (62%)
[22:47:43] Completed 157500 out of 250000 steps (63%)
[22:53:36] - Server has already received unit.
[22:53:36] Project: 6903 (Run 3, Clone 19, Gen 4)
[22:53:36] + Attempting to send results [November 19 22:53:36 UTC]
[23:03:09] Completed 160000 out of 250000 steps (64%)
Just noticed it was sent and received successfully but that was after 12 hours. Also note it attmepts to keep resending it. I have noted that has been occurring semi routinely also. I have 4 systems set up the same and not all of them do this. Any thoughts?
Given that you have four machines are 2 of the trying to upload at the same time? on my machines if one is uploading it locks out the connection until it has finished.
another thought - what happens if you shut down the affected machine and reboot -the client will attempt to send any outstanding work, does this upload a WU?
I would just watch it where it says [22:53:36] - Server has already received unit. [22:53:36] Project: 6903 (Run 3, Clone 19, Gen 4) means you successfully uploaded it prior to that time it should quit trying to send it now. I had one do the same thing before and after it received that message it stooped happening. I think it is a server error when the server does not report back to your machine that it has successfully received the WU because when it happened to me it was the same scenario that happened to you but this is only the second time I have seen it reported.
Well, p6903 (R11, C0, G53) took over 5 days to return so you only got base credit of 22706 for it. That was the unit that was just returned as number 20. Now p6903 (R3, C19, G4) will be successful return number 21 when your client is able to upload. I would say that for some reason this particular machine has units languishing in its queue.
Macaholic wrote:Well, p6903 (R11, C0, G53) took over 5 days to return so you only got base credit of 22706 for it. That was the unit that was just returned as number 20. Now p6903 (R3, C19, G4) will be successful return number 21 when your client is able to upload. I would say that for some reason this particular machine has units languishing in its queue.
But the log I posted showed it was completed and returned in less than 5 days. I should not keep getting repeatedly penalized for server issues on the receiveng end. As stated by Grandpa he has seen this once and has it reportd twice. It has been happenin requently with me lately I have lossed almost 1 million points now becouse of this. As tot the other point about 2 WU trying to upload at the same time, that only occured once a day or so ago yet there were no issues with uploading and receiving full credit for those WU's.
I doubt the problem originates on Stanford's end of things like I said I have only seen it twice once from you and once from myself. I have a feeling it has something to do with upload speeds from the users computer. I noticed when it happened to me I was on uploading at a 2KiBs to 40KiBs speed when normally I have a 2MkBs upload speed. After I rebooted everything returned to normal and it only happened on the 1 machine. I had one machine finsh a 6904 about 45 min before that on did and it had no problem and another machine finsh a 6903 3 hours after that one did and it had no problem. So the problem was most likely on my end. If it was a problem on Stanford end you would see it reported allot more, nothing has changed on the 6.34 client in quite a while.
Macaholic wrote:Your WU (P6903 R3 C19 G4) was added to the stats database on 2011-11-20 00:07:20 for 252695 points of credit
Days taken to complete WU: 3.72
You did complete the WU within the required 5.00 days. This must be one of those cases where you changed your user name or your passkey. If WU is downloaded with one username and passkey and uploaded with a different username or a different passkey, it will receive no bonus.