171.67.108.22

Moderators: Site Moderators, FAHC Science Team

Grego
Posts: 3
Joined: Fri Sep 09, 2011 1:33 am

Re: 171.67.108.22

Post by Grego »

I got a new computer in august and at first i was only running one classic counsel client with no problem. last saturday i added 3 more classic counsel clients, with correct machine id numbers, and i can't upload any of my work. I've finished 4 or 5 folds with each of the 4 cores but I can't upload, not even with the first one that used to work fine. My folding name is Grego13. Did I do something wrong or am I just getting bad work servers? What is status 500?

Code: Select all

[06:44:51] Folding@home Core Shutdown: FINISHED_UNIT
[06:44:53] CoreStatus = 64 (100)
[06:44:53] Sending work to server
[06:44:53] Project: 6883 (Run 665, Clone 16, Gen 211)
[06:44:53] - Read packet limit of 540015616... Set to 524286976.


[06:44:53] + Attempting to send results [September 12 06:44:53 UTC]
[06:44:53] - Couldn't send HTTP request to server
[06:44:53] + Could not connect to Work Server (results)
[06:44:53]     (171.67.108.33:8080)
[06:44:53] + Retrying using alternative port
[06:44:54] - Couldn't send HTTP request to server
[06:44:54]   (Got status 500)
[06:44:54] + Could not connect to Work Server (results)
[06:44:54]     (171.67.108.33:80)
[06:44:54] - Error: Could not transmit unit 02 (completed September 12) to work server.
[06:44:54]   Keeping unit 02 in queue.
[06:44:54] Project: 6882 (Run 350, Clone 1, Gen 54)
[06:44:54] - Read packet limit of 540015616... Set to 524286976.


[06:44:54] + Attempting to send results [September 12 06:44:54 UTC]
[06:44:54] - Couldn't send HTTP request to server
[06:44:54] + Could not connect to Work Server (results)
[06:44:54]     (171.67.108.33:8080)
[06:44:54] + Retrying using alternative port
[06:44:54] - Couldn't send HTTP request to server
[06:44:54] + Could not connect to Work Server (results)
[06:44:54]     (171.67.108.33:80)
[06:44:54] - Error: Could not transmit unit 01 (completed September 12) to work server.
[06:44:54] - Read packet limit of 540015616... Set to 524286976.


[06:44:54] + Attempting to send results [September 12 06:44:54 UTC]
[06:44:55] - Couldn't send HTTP request to server
[06:44:55] + Could not connect to Work Server (results)
[06:44:55]     (171.67.108.26:8080)
[06:44:55] + Retrying using alternative port
[06:44:56] - Couldn't send HTTP request to server
[06:44:56] + Could not connect to Work Server (results)
[06:44:56]     (171.67.108.26:80)
[06:44:56]   Could not transmit unit 01 to Collection server; keeping in queue.
[06:44:56] Project: 6883 (Run 665, Clone 16, Gen 211)
[06:44:56] - Read packet limit of 540015616... Set to 524286976.


[06:44:56] + Attempting to send results [September 12 06:44:56 UTC]
[06:44:56] - Couldn't send HTTP request to server
[06:44:56]   (Got status 500)
[06:44:56] + Could not connect to Work Server (results)
[06:44:56]     (171.67.108.33:8080)
[06:44:56] + Retrying using alternative port
[06:44:56] - Couldn't send HTTP request to server
[06:44:56] + Could not connect to Work Server (results)
[06:44:56]     (171.67.108.33:80)
[06:44:56] - Error: Could not transmit unit 02 (completed September 12) to work server.
[06:44:56] - Read packet limit of 540015616... Set to 524286976.


[06:44:56] + Attempting to send results [September 12 06:44:56 UTC]
[06:44:58] - Couldn't send HTTP request to server
[06:44:58] + Could not connect to Work Server (results)
[06:44:58]     (171.67.108.26:8080)
[06:44:58] + Retrying using alternative port
[06:44:59] - Couldn't send HTTP request to server
[06:44:59] + Could not connect to Work Server (results)
[06:44:59]     (171.67.108.26:80)
[06:44:59]   Could not transmit unit 02 to Collection server; keeping in queue.
[06:44:59] - Preparing to get new work unit...
[06:44:59] + Attempting to get work packet
[06:44:59] - Connecting to assignment server
[06:44:59] - Successful: assigned to (143.89.28.72).
[06:44:59] + News From Folding@Home: Welcome to Folding@Home
[06:44:59] Loaded queue successfully.
[06:45:03] Project: 6882 (Run 350, Clone 1, Gen 54)
[06:45:03] - Read packet limit of 540015616... Set to 524286976.


[06:45:03] + Attempting to send results [September 12 06:45:03 UTC]
[06:45:04] - Couldn't send HTTP request to server
[06:45:04]   (Got status 500)
[06:45:04] + Could not connect to Work Server (results)
[06:45:04]     (171.67.108.33:8080)
[06:45:04] + Retrying using alternative port
[06:45:04] - Couldn't send HTTP request to server
[06:45:04] + Could not connect to Work Server (results)
[06:45:04]     (171.67.108.33:80)
[06:45:04] - Error: Could not transmit unit 01 (completed September 12) to work server.
[06:45:04] - Read packet limit of 540015616... Set to 524286976.


[06:45:04] + Attempting to send results [September 12 06:45:04 UTC]
[06:45:05] - Couldn't send HTTP request to server
[06:45:05] + Could not connect to Work Server (results)
[06:45:05]     (171.67.108.26:8080)
[06:45:05] + Retrying using alternative port
[06:45:06] - Couldn't send HTTP request to server
[06:45:06] + Could not connect to Work Server (results)
[06:45:06]     (171.67.108.26:80)
[06:45:06]   Could not transmit unit 01 to Collection server; keeping in queue.
[06:45:06] Project: 6883 (Run 665, Clone 16, Gen 211)
[06:45:06] - Read packet limit of 540015616... Set to 524286976.


[06:45:06] + Attempting to send results [September 12 06:45:06 UTC]
[06:45:06] - Couldn't send HTTP request to server
[06:45:06] + Could not connect to Work Server (results)
[06:45:06]     (171.67.108.33:8080)
[06:45:06] + Retrying using alternative port
[06:45:07] - Couldn't send HTTP request to server
[06:45:07] + Could not connect to Work Server (results)
[06:45:07]     (171.67.108.33:80)
[06:45:07] - Error: Could not transmit unit 02 (completed September 12) to work server.
[06:45:07] - Read packet limit of 540015616... Set to 524286976.


[06:45:07] + Attempting to send results [September 12 06:45:07 UTC]
[06:45:08] - Couldn't send HTTP request to server
[06:45:08] + Could not connect to Work Server (results)
[06:45:08]     (171.67.108.26:8080)
[06:45:08] + Retrying using alternative port
[06:45:09] - Couldn't send HTTP request to server
[06:45:09] + Could not connect to Work Server (results)
[06:45:09]     (171.67.108.26:80)
[06:45:09]   Could not transmit unit 02 to Collection server; keeping in queue.
[06:45:09] + Closed connections
Mod Edit: Added Code Tags - PantherX
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 171.67.108.22

Post by 7im »

Hello Grego, welcome to the forum.

When all the clients on one computer do the same thing, then it's most likely something like a router or firewall blocking the connection. Did you change any network settings, proxy settings, etc?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Grego
Posts: 3
Joined: Fri Sep 09, 2011 1:33 am

Re: 171.67.108.22

Post by Grego »

No I didn't change anything. I am still receiving work units but still unable to upload results. I will check my firewall and antivirus. Also I'm still running a classic systray client on my old computer that is working fine .
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 171.67.108.22

Post by 7im »

Posting more of the fahlog would be helpful, especially the part where the client starts up, starting with ###############.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Grego
Posts: 3
Joined: Fri Sep 09, 2011 1:33 am

Re: 171.67.108.22

Post by Grego »

You are right 7im, I shut down Zone Alarm firewall and turned on the windows firewall - then rebooted the 4 counsel clients and all the results were sent sucessfully. Thanks for your help. Greg
SKeptical_Thinker
Posts: 76
Joined: Tue Apr 29, 2008 11:02 pm
Hardware configuration: XP-32 Pro SP-3
Antec NSK-2480 with two Thermaltake 120mm Smart Fans
Gigabyte ga-ma78gm-s2h 780G IGP
BE-2350 with 10.5 x multiplier, 1.250V in BIOS, clock at 272 (2.856GHz)
EVGA 8800 GS
Ninja Mini CPU HS
GeIL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800
Seagate 500GB SATA hard drive
ASUS 18X DVD±R DVD Burner PATA Model DRW-1814BL

Re: 171.67.108.22

Post by SKeptical_Thinker »

I now have several WUs to return, but can't:

Code: Select all

11:44:37:Sending unit results: id:01 state:SEND project:2684 run:9 clone:6 gen:90 core:0xa5 unit:0x1dc4b1114e6f9b86005a000609007c0a
11:44:37:Unit 01: Uploading 12.98KiB
11:44:37:Connecting to 171.67.108.22:8080
^[[93m11:44:37:WARNING: Exception: Failed to send results to work server: Failed to read stream^[[0m
11:44:37:Trying to send results to collection server
11:44:37:Unit 01: Uploading 12.98KiB
11:44:37:Connecting to 171.67.108.25:8080
11:44:37:Sending unit results: id:00 state:SEND project:2684 run:9 clone:6 gen:90 core:0xa5 unit:0x56cdfabb4e6fa30e005a000609007c0a
11:44:37:Unit 00: Uploading 12.98KiB
11:44:37:Connecting to 171.67.108.22:8080
^[[93m11:44:37:WARNING: WorkServer connection failed on port 8080 trying 80^[[0m
11:44:37:Connecting to 171.67.108.25:80
^[[91m11:44:38:ERROR: Exception: Failed to connect to 171.67.108.25:80: Connection refused^[[0m
^[[93m11:44:38:WARNING: Exception: Failed to send results to work server: Failed to read stream^[[0m
11:44:38:Trying to send results to collection server
11:44:38:Unit 00: Uploading 12.98KiB
11:44:38:Connecting to 171.67.108.25:8080
^[[93m11:44:38:WARNING: WorkServer connection failed on port 8080 trying 80^[[0m
11:44:38:Connecting to 171.67.108.25:80
^[[91m11:44:38:ERROR: Exception: Failed to connect to 171.67.108.25:80: Connection refused^[[0m
Image
SKeptical_Thinker
Posts: 76
Joined: Tue Apr 29, 2008 11:02 pm
Hardware configuration: XP-32 Pro SP-3
Antec NSK-2480 with two Thermaltake 120mm Smart Fans
Gigabyte ga-ma78gm-s2h 780G IGP
BE-2350 with 10.5 x multiplier, 1.250V in BIOS, clock at 272 (2.856GHz)
EVGA 8800 GS
Ninja Mini CPU HS
GeIL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800
Seagate 500GB SATA hard drive
ASUS 18X DVD±R DVD Burner PATA Model DRW-1814BL

Re: 171.67.108.22

Post by SKeptical_Thinker »

Still unable to send results:

Code: Select all

10:59:43:Sending unit results: id:01 state:SEND project:2684 run:9 clone:6 gen:90 core:0xa5 unit:0x1dc4b1114e6f9b86005a000609007c0a
10:59:43:Unit 01: Uploading 12.98KiB
10:59:43:Connecting to 171.67.108.22:8080
10:59:43:WARNING: Exception: Failed to send results to work server: Failed to read stream
10:59:43:Trying to send results to collection server
10:59:43:Unit 01: Uploading 12.98KiB
10:59:43:Connecting to 171.67.108.25:8080
10:59:43:Sending unit results: id:00 state:SEND project:2684 run:9 clone:6 gen:90 core:0xa5 unit:0x56cdfabb4e6fa30e005a000609007c0a
10:59:43:Unit 00: Uploading 12.98KiB
10:59:43:Connecting to 171.67.108.22:8080
10:59:43:WARNING: WorkServer connection failed on port 8080 trying 80
10:59:43:Connecting to 171.67.108.25:80
10:59:43:ERROR: Exception: Failed to connect to 171.67.108.25:80: Connection refused
10:59:43:WARNING: Exception: Failed to send results to work server: Failed to read stream
10:59:43:Trying to send results to collection server
10:59:44:Unit 00: Uploading 12.98KiB
10:59:44:Connecting to 171.67.108.25:8080
10:59:44:WARNING: WorkServer connection failed on port 8080 trying 80
10:59:44:Connecting to 171.67.108.25:80
10:59:44:ERROR: Exception: Failed to connect to 171.67.108.25:80: Connection refused
I see no reason to continue folding on this machine until this issue is resolved. All I'm doing is slowing the project down.

I will be shutting it down after the current WU is finished.
Image
Post Reply