130.237.232.141 (P6900 unable to upload)

yemgi · Post by **yemgi** » Sat Jun 11, 2011 8:51 am

Same problem here :

20:41:13:Unit 00:Completed 250000 out of 250000 steps  (100%)
20:41:30:Unit 00:DynamicWrapper: Finished Work Unit: sleep=10000
20:41:40:Unit 00:
20:41:40:Unit 00:Finished Work Unit:
20:41:40:Unit 00:- Reading up to 52713120 from "00/wudata_01.trr": Read 52713120
20:41:40:Unit 00:trr file hash check passed.
20:41:41:Unit 00:- Reading up to 47104308 from "00/wudata_01.xtc": Read 47104308
20:41:41:Unit 00:xtc file hash check passed.
20:41:41:Unit 00:edr file hash check passed.
20:41:41:Unit 00:logfile size: 213820
20:41:41:Unit 00:Leaving Run
20:41:44:Unit 00:- Writing 100199188 bytes of core data to disk...
20:41:46:Unit 00:  ... Done.
20:42:18:Unit 00:- Shutting down core
20:42:18:Unit 00:
20:42:18:Unit 00:Folding@home Core Shutdown: FINISHED_UNIT
20:42:20:FahCore, running Unit 00, returned: FINISHED_UNIT (100)
20:42:20:Sending unit results: id:00 state:SEND project:6900 run:21 clone:15 gen:1 core:0xa5 unit:0x0000000152be740d4de96235646cf2f3
20:42:20:Unit 00: Uploading 95.56MiB
20:42:20:Connecting to 130.237.232.141:8080
...
22:29:49:WARNING: Exception: Failed to send results to work server: Failed to read response packet: HTTP_OK
22:29:49:Trying to send results to collection server
22:29:49:Unit 00: Uploading 95.56MiB
22:29:49:Connecting to 130.237.165.141:8080
22:30:20:ERROR: Exception: Upload failed
22:30:20:Sending unit results: id:00 state:SEND project:6900 run:21 clone:15 gen:1 core:0xa5 unit:0x0000000152be740d4de96235646cf2f3
22:30:20:Unit 00: Uploading 95.56MiB
22:30:20:Connecting to 130.237.232.141:8080
...
23:31:06:WARNING: Exception: Failed to send results to work server: Failed to read response packet: HTTP_OK
23:31:06:Trying to send results to collection server
23:31:06:Unit 00: Uploading 95.56MiB
23:31:06:Connecting to 130.237.165.141:8080
23:31:27:ERROR: Exception: Upload failed
23:31:27:Sending unit results: id:00 state:SEND project:6900 run:21 clone:15 gen:1 core:0xa5 unit:0x0000000152be740d4de96235646cf2f3
23:31:27:Unit 00: Uploading 95.56MiB
23:31:27:Connecting to 130.237.232.141:8080
...
23:57:44:WARNING: Exception: Failed to send results to work server: Failed to read response packet: HTTP_OK
23:57:44:Trying to send results to collection server
23:57:44:Unit 00: Uploading 95.56MiB
23:57:44:Connecting to 130.237.165.141:8080
23:58:06:ERROR: Exception: Upload failed
23:58:06:Sending unit results: id:00 state:SEND project:6900 run:21 clone:15 gen:1 core:0xa5 unit:0x0000000152be740d4de96235646cf2f3
23:58:06:Unit 00: Uploading 95.56MiB
23:58:06:Connecting to 130.237.232.141:8080
...
05:12:07:WARNING: Exception: Failed to send results to work server: Failed to read response packet: HTTP_OK
05:12:07:Trying to send results to collection server
05:12:07:Unit 00: Uploading 95.56MiB
05:12:07:Connecting to 130.237.165.141:8080
05:12:28:ERROR: Exception: Upload failed
05:18:17:Unit 01:Completed 20000 out of 250000 steps  (8%)
06:22:04:Unit 01:Completed 22500 out of 250000 steps  (9%)
06:48:52:Sending unit results: id:00 state:SEND project:6900 run:21 clone:15 gen:1 core:0xa5 unit:0x0000000152be740d4de96235646cf2f3
06:48:52:Unit 00: Uploading 95.56MiB
06:48:52:Connecting to 130.237.232.141:8080
...
07:04:37:WARNING: Exception: Failed to send results to work server: Upload failed
07:04:37:Trying to send results to collection server
07:04:37:Unit 00: Uploading 95.56MiB
07:04:37:Connecting to 130.237.165.141:8080
07:04:58:ERROR: Exception: Upload failed

I have not ben able to upload completed WUs for over 10 hours

RETARD · Post by **RETARD** » Sat Jun 11, 2011 9:34 am

ditto
same problem here

Code: Select all

Note: Please read the license agreement (fah6 -license). Further 
use of this software requires that you have read and accepted this agreement.

8 cores detected


--- Opening Log file [June 9 00:57:41 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/wisp/fah
Executable: ./fah6
Arguments: -smp 8 -bigadv 

[00:57:41] - Ask before connecting: No
[00:57:41] - User name: leroyxx (Team 24)
[00:57:41] - User ID: 5522FC442C8CD81A
[00:57:41] - Machine ID: 1
[00:57:41] 
[00:57:41] Loaded queue successfully.
[00:57:41] 
[00:57:41] + Processing work unit
[00:57:41] Core required: FahCore_a5.exe
[June7:41] Core found.
[00:57:41] Working on queue slot 04 [June 9 00:57:41 UTC]
[00:57:41] + Working ...
[00:57:41] 
[00:57:41] *------------------------------*
[00:57:41] Folding@Home Gromacs SMP Core
[00:57:41] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[00:57:41] 
[00:57:41] Preparing to commence simulation
[00:57:41] - Looking at optimizations...
[00:57:41] - Files status OK
[00:57:43] - Expanded 24864639 -> 30796292 (decompressed 123.8 percent)
[00:57:43] Called DecompressByteArray: compressed_data_size=24864639 data_size=30796292, decompressed_data_size=30796292 diff=0
[00:57:43] - Digital signature verified
[00:57:43] 
[00:57:43] Project: 6900 (Run 34, Clone 2, Gen 2)
[00:57:43] 
[00:57:43] Assembly optimizations on if available.
[00:57:43] Entering M.D.
[00:57:49] Using Gromacs checkpoints
                         :-)  G  R  O  M  A  C  S  (-:

                   Groningen Machine for Chemical Simulation

                            :-)  VERSION 4.5.3  (-:

        Written by Emile Apol, Rossen Apostolov, Herman J.C. Berendsen,
      Aldert van Buuren, Pär Bjelkmar, Rudi van Drunen, Anton Feenstra, 
        Gerrit Groenhof, Peter Kasson, Per Larsson, Pieter Meulenhoff, 
           Teemu Murtola, Szilard Pall, Sander Pronk, Roland Schulz, 
                Michael Shirts, Alfons Sijbers, Peter Tieleman,

               Berk Hess, David van der Spoel, and Erik Lindahl.

       Copyright (c) 1991-2000, University of Groningen, The Netherlands.
            Copyright (c) 2001-2010, The GROMACS development team at
        Uppsala University & The Royal Institute of Technology, Sweden.
            check out http://www.gromacs.org for more information.


                               :-)  Gromacs  (-:

[00:57:50] Mapping NT from 8 to 8 
Reading file work/wudata_04.tpr, VERSION 4.0.99_development_20090605 (single precision)
Note: tpx file_version 70, software version 73
Starting 8 threads

Reading checkpoint file work/wudata_04.cpt generated: Thu Jun  9 09:39:55 2011


Making 1D domain decomposition 8 x 1 x 1
starting mdrun 'SINGLE VESICLE in water'
750000 steps,   3000.0 ps (continuing from step 649190,   2596.8 ps).
[00:57:54] Resuming from checkpoint
[00:57:55] Verified work/wudata_04.log
[00:57:55] Verified work/wudata_04.trr
[00:57:56] Verified work/wudata_04.xtc
[00:57:56] Verified work/wudata_04.edr
[00:57:56] Completed 149190 out of 250000 steps  (59%)
[01:04:57] Completed 150000 out of 250000 steps  (60%)
[01:26:56] Completed 152500 out of 250000 steps  (61%)
[01:48:53] Completed 155000 out of 250000 steps  (62%)
[02:10:47] Completed 157500 out of 250000 steps  (63%)
[02:33:25] Completed 160000 out of 250000 steps  (64%)
[02:54:58] Completed 162500 out of 250000 steps  (65%)
[03:16:26] Completed 165000 out of 250000 steps  (66%)
[03:37:55] Completed 167500 out of 250000 steps  (67%)
[03:59:23] Completed 170000 out of 250000 steps  (68%)
[04:20:50] Completed 172500 out of 250000 steps  (69%)
[04:42:17] Completed 175000 out of 250000 steps  (70%)
[05:03:46] Completed 177500 out of 250000 steps  (71%)
[05:25:14] Completed 180000 out of 250000 steps  (72%)
[05:46:42] Completed 182500 out of 250000 steps  (73%)
[06:08:09] Completed 185000 out of 250000 steps  (74%)
[06:29:37] Completed 187500 out of 250000 steps  (75%)
[06:51:04] Completed 190000 out of 250000 steps  (76%)
[07:12:33] Completed 192500 out of 250000 steps  (77%)
[07:34:02] Completed 195000 out of 250000 steps  (78%)
[07:55:30] Completed 197500 out of 250000 steps  (79%)
[08:17:00] Completed 200000 out of 250000 steps  (80%)
[08:38:29] Completed 202500 out of 250000 steps  (81%)
[09:00:05] Completed 205000 out of 250000 steps  (82%)
[09:21:35] Completed 207500 out of 250000 steps  (83%)
[09:43:13] Completed 210000 out of 250000 steps  (84%)
[10:04:52] Completed 212500 out of 250000 steps  (85%)
[10:26:23] Completed 215000 out of 250000 steps  (86%)
[10:47:55] Completed 217500 out of 250000 steps  (87%)
[11:09:26] Completed 220000 out of 250000 steps  (88%)
[11:30:56] Completed 222500 out of 250000 steps  (89%)
[11:52:48] Completed 225000 out of 250000 steps  (90%)
[12:15:55] Completed 227500 out of 250000 steps  (91%)
[12:37:31] Completed 230000 out of 250000 steps  (92%)
[12:59:01] Completed 232500 out of 250000 steps  (93%)
[13:20:33] Completed 235000 out of 250000 steps  (94%)
[13:42:08] Completed 237500 out of 250000 steps  (95%)
[14:03:45] Completed 240000 out of 250000 steps  (96%)
[14:25:38] Completed 242500 out of 250000 steps  (97%)
[14:47:42] Completed 245000 out of 250000 steps  (98%)
[15:09:42] Completed 247500 out of 250000 steps  (99%)
[15:31:27] Completed 250000 out of 250000 steps  (100%)

Writing final coordinates.

 Average load imbalance: 6.2 %
 Part of the total run time spent waiting due to load imbalance: 2.9 %


	Parallel run - timing based on wallclock.

               NODE (s)   Real (s)      (%)
       Time:  52419.004  52419.004    100.0
                       14h33:39
               (Mnbf/s)   (GFlops)   (ns/day)  (hour/ns)
Performance:    701.798     37.321      0.665     36.109

Thanx for Using GROMACS - Have a Nice Day

[15:31:32] DynamicWrapper: Finished Work Unit: sleep=10000
[15:31:42] 
[15:31:42] Finished Work Unit:
[15:31:42] - Reading up to 52713120 from "work/wudata_04.trr": Read 52713120
[15:31:43] trr file hash check passed.
[15:31:43] - Reading up to 47104504 from "work/wudata_04.xtc": Read 47104504
[15:31:44] xtc file hash check passed.
[15:31:44] edr file hash check passed.
[15:31:44] logfile size: 195412
[15:31:44] Leaving Run
[15:31:44] - Writing 100182984 bytes of core data to disk...
[15:31:45]   ... Done.
[15:31:47] - Shutting down core
[15:31:47] 
[15:31:47] Folding@home Core Shutdown: FINISHED_UNIT
[15:31:48] CoreStatus = 64 (100)
[15:31:48] Sending work to server
[15:31:48] Project: 6900 (Run 34, Clone 2, Gen 2)


[15:31:48] + Attempting to send results [June 9 15:31:48 UTC]
[15:53:34] + Results successfully sent
[15:53:34] Thank you for your contribution to Folding@Home.
[15:53:34] + Number of Units Completed: 16

[15:53:34] - Preparing to get new work unit...
[15:53:34] Cleaning up work directory
[15:53:34] + Attempting to get work packet
[15:53:34] Passkey found
[15:53:34] - Connecting to assignment server
[15:53:36] - Successful: assigned to (130.237.232.141).
[15:53:36] + News From Folding@Home: Welcome to Folding@Home
[15:53:36] Loaded queue successfully.
[15:59:21] + Closed connections
[15:59:21] 
[15:59:21] + Processing work unit
[15:59:21] Core required: FahCore_a5.exe
[15:59:21] Core found.
[15:59:21] Working on queue slot 05 [June 9 15:59:21 UTC]
[15:59:21] + Working ...
[15:59:21] 
[15:59:21] *------------------------------*
[15:59:21] Folding@Home Gromacs SMP Core
[15:59:21] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[15:59:21] 
[15:59:21] Preparing to commence simulation
[15:59:21] - Looking at optimizations...
[15:59:21] - Created dyn
[15:59:21] - Files status OK
[15:59:23] - Expanded 24866033 -> 30796292 (decompressed 123.8 percent)
[15:59:23] Called DecompressByteArray: compressed_data_size=24866033 data_size=30796292, decompressed_data_size=30796292 diff=0
[15:59:23] - Digital signature verified
[15:59:23] 
[15:59:23] Project: 6900 (Run 34, Clone 2, Gen 3)
[15:59:23] 
[15:59:23] Assembly optimizations on if available.
[15:59:23] Entering M.D.
                         :-)  G  R  O  M  A  C  S  (-:

                   Groningen Machine for Chemical Simulation

                            :-)  VERSION 4.5.3  (-:

        Written by Emile Apol, Rossen Apostolov, Herman J.C. Berendsen,
      Aldert van Buuren, Pär Bjelkmar, Rudi van Drunen, Anton Feenstra, 
        Gerrit Groenhof, Peter Kasson, Per Larsson, Pieter Meulenhoff, 
           Teemu Murtola, Szilard Pall, Sander Pronk, Roland Schulz, 
                Michael Shirts, Alfons Sijbers, Peter Tieleman,

               Berk Hess, David van der Spoel, and Erik Lindahl.

       Copyright (c) 1991-2000, University of Groningen, The Netherlands.
            Copyright (c) 2001-2010, The GROMACS development team at
        Uppsala University & The Royal Institute of Technology, Sweden.
            check out http://www.gromacs.org for more information.


                               :-)  Gromacs  (-:

Reading file work/wudata_05.tpr, VERSION 4.0.99_development_20090605 (single precision)
[15:59:29] Mapping NT from 8 to 8 
Note: tpx file_version 70, software version 73
Starting 8 threads
Making 1D domain decomposition 8 x 1 x 1
starting mdrun 'SINGLE VESICLE in water'
1000000 steps,   4000.0 ps (continuing from step 750000,   3000.0 ps).
[15:59:31] Completed 0 out of 250000 steps  (0%)
[16:21:09] Completed 2500 out of 250000 steps  (1%)
[16:42:48] Completed 5000 out of 250000 steps  (2%)
[17:04:30] Completed 7500 out of 250000 steps  (3%)
[17:26:02] Completed 10000 out of 250000 steps  (4%)
[17:47:31] Completed 12500 out of 250000 steps  (5%)
[18:09:01] Completed 15000 out of 250000 steps  (6%)
[18:30:31] Completed 17500 out of 250000 steps  (7%)
[18:52:00] Completed 20000 out of 250000 steps  (8%)
[19:13:29] Completed 22500 out of 250000 steps  (9%)
[19:35:00] Completed 25000 out of 250000 steps  (10%)
[19:56:29] Completed 27500 out of 250000 steps  (11%)
[20:18:00] Completed 30000 out of 250000 steps  (12%)
[20:39:31] Completed 32500 out of 250000 steps  (13%)
[21:01:01] Completed 35000 out of 250000 steps  (14%)
[21:22:31] Completed 37500 out of 250000 steps  (15%)
[21:44:02] Completed 40000 out of 250000 steps  (16%)
[22:05:32] Completed 42500 out of 250000 steps  (17%)
[22:27:08] Completed 45000 out of 250000 steps  (18%)
[22:48:38] Completed 47500 out of 250000 steps  (19%)
[23:10:09] Completed 50000 out of 250000 steps  (20%)
[23:31:47] Completed 52500 out of 250000 steps  (21%)
[23:53:21] Completed 55000 out of 250000 steps  (22%)
[00:14:54] Completed 57500 out of 250000 steps  (23%)
[00:36:27] Completed 60000 out of 250000 steps  (24%)
[00:57:59] Completed 62500 out of 250000 steps  (25%)
[01:19:32] Completed 65000 out of 250000 steps  (26%)
[01:41:05] Completed 67500 out of 250000 steps  (27%)
[02:02:38] Completed 70000 out of 250000 steps  (28%)
[02:24:09] Completed 72500 out of 250000 steps  (29%)
[02:45:42] Completed 75000 out of 250000 steps  (30%)
[03:07:14] Completed 77500 out of 250000 steps  (31%)
[03:28:46] Completed 80000 out of 250000 steps  (32%)
[03:50:20] Completed 82500 out of 250000 steps  (33%)
[04:11:52] Completed 85000 out of 250000 steps  (34%)
[04:33:25] Completed 87500 out of 250000 steps  (35%)
[04:55:01] Completed 90000 out of 250000 steps  (36%)
[05:16:33] Completed 92500 out of 250000 steps  (37%)
[05:38:04] Completed 95000 out of 250000 steps  (38%)
[05:59:37] Completed 97500 out of 250000 steps  (39%)
[06:21:54] Completed 100000 out of 250000 steps  (40%)
[06:43:32] Completed 102500 out of 250000 steps  (41%)
[07:05:19] Completed 105000 out of 250000 steps  (42%)
[07:26:50] Completed 107500 out of 250000 steps  (43%)
[07:48:31] Completed 110000 out of 250000 steps  (44%)
[08:10:31] Completed 112500 out of 250000 steps  (45%)
[08:32:44] Completed 115000 out of 250000 steps  (46%)
[08:54:21] Completed 117500 out of 250000 steps  (47%)
[09:16:03] Completed 120000 out of 250000 steps  (48%)
[09:37:44] Completed 122500 out of 250000 steps  (49%)
[09:59:33] Completed 125000 out of 250000 steps  (50%)
[10:21:24] Completed 127500 out of 250000 steps  (51%)
[10:42:59] Completed 130000 out of 250000 steps  (52%)
[11:04:34] Completed 132500 out of 250000 steps  (53%)
[11:26:05] Completed 135000 out of 250000 steps  (54%)
[11:47:39] Completed 137500 out of 250000 steps  (55%)
[12:09:11] Completed 140000 out of 250000 steps  (56%)
[12:30:42] Completed 142500 out of 250000 steps  (57%)
[12:52:13] Completed 145000 out of 250000 steps  (58%)
[13:13:44] Completed 147500 out of 250000 steps  (59%)
[13:35:16] Completed 150000 out of 250000 steps  (60%)
[13:56:46] Completed 152500 out of 250000 steps  (61%)
[14:18:19] Completed 155000 out of 250000 steps  (62%)
[14:39:51] Completed 157500 out of 250000 steps  (63%)
[15:01:44] Completed 160000 out of 250000 steps  (64%)
[15:23:56] Completed 162500 out of 250000 steps  (65%)
[15:47:26] Completed 165000 out of 250000 steps  (66%)
[16:11:53] Completed 167500 out of 250000 steps  (67%)
[16:35:51] Completed 170000 out of 250000 steps  (68%)
[17:00:20] Completed 172500 out of 250000 steps  (69%)
[17:24:48] Completed 175000 out of 250000 steps  (70%)
[17:49:14] Completed 177500 out of 250000 steps  (71%)
[18:13:37] Completed 180000 out of 250000 steps  (72%)
[18:35:29] Completed 182500 out of 250000 steps  (73%)
[18:56:57] Completed 185000 out of 250000 steps  (74%)
[19:18:27] Completed 187500 out of 250000 steps  (75%)
[19:39:56] Completed 190000 out of 250000 steps  (76%)
[20:01:26] Completed 192500 out of 250000 steps  (77%)
[20:22:55] Completed 195000 out of 250000 steps  (78%)
[20:44:26] Completed 197500 out of 250000 steps  (79%)
[21:05:56] Completed 200000 out of 250000 steps  (80%)
[21:27:26] Completed 202500 out of 250000 steps  (81%)
[21:48:55] Completed 205000 out of 250000 steps  (82%)
[22:10:32] Completed 207500 out of 250000 steps  (83%)
[22:32:02] Completed 210000 out of 250000 steps  (84%)
[22:53:30] Completed 212500 out of 250000 steps  (85%)
[23:14:59] Completed 215000 out of 250000 steps  (86%)
[23:36:28] Completed 217500 out of 250000 steps  (87%)
[23:57:57] Completed 220000 out of 250000 steps  (88%)
[00:19:26] Completed 222500 out of 250000 steps  (89%)
[00:40:58] Completed 225000 out of 250000 steps  (90%)
[01:02:28] Completed 227500 out of 250000 steps  (91%)
[01:24:00] Completed 230000 out of 250000 steps  (92%)
[01:45:50] Completed 232500 out of 250000 steps  (93%)
[02:07:21] Completed 235000 out of 250000 steps  (94%)
[02:28:51] Completed 237500 out of 250000 steps  (95%)
[02:50:23] Completed 240000 out of 250000 steps  (96%)
[03:11:57] Completed 242500 out of 250000 steps  (97%)
[03:33:33] Completed 245000 out of 250000 steps  (98%)
[03:55:07] Completed 247500 out of 250000 steps  (99%)
[04:16:42] Completed 250000 out of 250000 steps  (100%)

Writing final coordinates.

 Average load imbalance: 6.2 %
 Part of the total run time spent waiting due to load imbalance: 2.9 %


	Parallel run - timing based on wallclock.

               NODE (s)   Real (s)      (%)
       Time: 130636.556 130636.556    100.0
                       1d12h17:16
               (Mnbf/s)   (GFlops)   (ns/day)  (hour/ns)
Performance:    698.323     37.137      0.661     36.288

Thanx for Using GROMACS - Have a Nice Day

[04:16:47] DynamicWrapper: Finished Work Unit: sleep=10000
[04:16:57] 
[04:16:57] Finished Work Unit:
[04:16:57] - Reading up to 52713120 from "work/wudata_05.trr": Read 52713120
[04:16:57] trr file hash check passed.
[04:16:57] - Reading up to 47026752 from "work/wudata_05.xtc": Read 47026752
[04:16:58] xtc file hash check passed.
[04:16:58] edr file hash check passed.
[04:16:58] logfile size: 192550
[04:16:58] Leaving Run
[04:16:59] - Writing 100102370 bytes of core data to disk...
[04:17:00]   ... Done.
[04:17:02] - Shutting down core
[04:17:02] 
[04:17:02] Folding@home Core Shutdown: FINISHED_UNIT
[04:17:03] CoreStatus = 64 (100)
[04:17:03] Sending work to server
[04:17:03] Project: 6900 (Run 34, Clone 2, Gen 3)


[04:17:03] + Attempting to send results [June 11 04:17:03 UTC]
^C
Folding@Home Client Shutdown.
wisp@ubuntu:~/fah$ ./fah6

Note: Please read the license agreement (fah6 -license). Further 
use of this software requires that you have read and accepted this agreement.

8 cores detected


--- Opening Log file [June 11 05:05:27 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/wisp/fah
Executable: ./fah6
Arguments: -smp 8 -bigadv 

[05:05:27] - Ask before connecting: No
[05:05:27] - User name: leroyxx (Team 24)
[05:05:27] - User ID: 5522FC442C8CD81A
[05:05:27] - Machine ID: 1
[05:05:27] 
[05:05:27] Loaded queue successfully.
[05:05:27] - Preparing to get new work unit...
[05:05:27] Cleaning up work directory
[05:05:27] Project: 6900 (Run 34, Clone 2, Gen 3)
[05:05:27] + Attempting to get work packet


[05:05:27] Passkey found
[05:05:27] + Attempting to send results [June 11 05:05:27 UTC]
[05:05:27] - Connecting to assignment server
[05:05:29] - Successful: assigned to (171.67.108.22).
[05:05:29] + News From Folding@Home: Welcome to Folding@Home
[05:05:29] Loaded queue successfully.
[05:08:35] + Closed connections
[05:08:35] 
[05:08:35] + Processing work unit
[05:08:35] Core required: FahCore_a5.exe
[05:08:35] Core found.
[05:08:35] Working on queue slot 06 [June 11 05:08:35 UTC]
[05:08:35] + Working ...
[05:08:35] 
[05:08:35] *------------------------------*
[05:08:35] Folding@Home Gromacs SMP Core
[05:08:35] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[05:08:35] 
[05:08:35] Preparing to commence simulation
[05:08:35] - Looking at optimizations...
[05:08:35] - Created dyn
[05:08:35] - Files status OK
[05:08:37] - Expanded 26601966 -> 32949201 (decompressed 123.8 percent)
[05:08:37] Called DecompressByteArray: compressed_data_size=26601966 data_size=32949201, decompressed_data_size=32949201 diff=0
[05:08:37] - Digital signature verified
[05:08:37] 
[05:08:37] Project: 2685 (Run 1, Clone 5, Gen 107)
[05:08:37] 
[05:08:37] Assembly optimizations on if available.
[05:08:37] Entering M.D.
                         :-)  G  R  O  M  A  C  S  (-:

                   Groningen Machine for Chemical Simulation

                            :-)  VERSION 4.5.3  (-:

        Written by Emile Apol, Rossen Apostolov, Herman J.C. Berendsen,
      Aldert van Buuren, Pär Bjelkmar, Rudi van Drunen, Anton Feenstra, 
        Gerrit Groenhof, Peter Kasson, Per Larsson, Pieter Meulenhoff, 
           Teemu Murtola, Szilard Pall, Sander Pronk, Roland Schulz, 
                Michael Shirts, Alfons Sijbers, Peter Tieleman,

               Berk Hess, David van der Spoel, and Erik Lindahl.

       Copyright (c) 1991-2000, University of Groningen, The Netherlands.
            Copyright (c) 2001-2010, The GROMACS development team at
        Uppsala University & The Royal Institute of Technology, Sweden.
            check out http://www.gromacs.org for more information.


                               :-)  Gromacs  (-:

Reading file work/wudata_06.tpr, VERSION 4.0.99_development_20090605 (single precision)
[05:08:43] Mapping NT from 8 to 8 
Note: tpx file_version 70, software version 73
Starting 8 threads
Making 1D domain decomposition 8 x 1 x 1
starting mdrun 'SINGLE VESICLE in water'
27000002 steps, 108000.0 ps (continuing from step 26750002, 107000.0 ps).
[05:08:45] Completed 0 out of 250000 steps  (0%)
[05:26:43] - Couldn't send HTTP request to server
[05:26:43] + Could not connect to Work Server (results)
[05:26:43]     (130.237.232.141:8080)
[05:26:43] + Retrying using alternative port
[05:26:44] - Couldn't send HTTP request to server
[05:26:44] + Could not connect to Work Server (results)
[05:26:44]     (130.237.232.141:80)
[05:26:44] - Error: Could not transmit unit 05 (completed June 11) to work server.
[05:26:44]   Keeping unit 05 in queue.
[05:31:38] Completed 2500 out of 250000 steps  (1%)
[05:54:33] Completed 5000 out of 250000 steps  (2%)
[06:17:24] Completed 7500 out of 250000 steps  (3%)
[06:40:35] Completed 10000 out of 250000 steps  (4%)
[07:04:17] Completed 12500 out of 250000 steps  (5%)
[07:27:51] Completed 15000 out of 250000 steps  (6%)
[07:51:20] Completed 17500 out of 250000 steps  (7%)
[08:14:54] Completed 20000 out of 250000 steps  (8%)
[08:38:22] Completed 22500 out of 250000 steps  (9%)
[09:01:50] Completed 25000 out of 250000 steps  (10%)
[09:25:35] Completed 27500 out of 250000 steps  (11%)

had to restart client to enable downloading of another unit

GreyWhiskers · Post by **GreyWhiskers** » Sat Jun 11, 2011 10:55 am

Well, it finally bit me too - not quite so academic as just looking up and analyzing the server stats.

Strange thing is that after normal termination of the Work Unit at 08:34 UTC, and after normal creation of the /wuresults_03.dat file, the Windowx 7 v6 SMP client got hung up when trying to upload. at the end of the first Code block below - we see

[08:36:24] Connecting to http://130.237.232.141:8080/
[10:07:43] Killing all core threads

The client was "stuck" trying to upload after it had ostensibly connected at 08:36:24. I CTRL-C'ed the client at that point, and restarted. The client immediately cleaned up the old work folder (gasp. 2.2 days of folding), but did leave the [08:36:24] wuresults_03.dat file. The assignment server (second Code block) connected to 171.67.108.22, where it downloaded and started executing a 2685.

It's now 03:41 local in California, so I'll leave it to its own devices and go to bed. The new WU got to its 1% point, but the completed p6900 still waiting to be sent back, with clock ticking on QRB. You can see at the end of the second CODE block it tried the upload again - but now couldn't connect to the server.

BTW, this phenom of being stuck on the Connecting to Server isn't new. Here's an example from Feb 2011. Re: How do I upload my results?

fgiouh89fgh wrote: Sat Feb 05, 2011 8:06 pm
It was also stuck on "Connecting to130.237.232.141:8080/". I do not think it was uploading anything, it was just sitting there at that screen. Even NetWorx showed virtually no activity (under a KB upload).

Code: Select all

[08:34:22] DynamicWrapper: Finished Work Unit: sleep=10000
[08:34:32] 
[08:34:32] Finished Work Unit:
[08:34:32] - Reading up to 52713120 from "work/wudata_03.trr": Read 52713120
[08:34:32] trr file hash check passed.
[08:34:32] - Reading up to 47064932 from "work/wudata_03.xtc": Read 47064932
[08:34:33] xtc file hash check passed.
[08:34:33] edr file hash check passed.
[08:34:33] logfile size: 208767
[08:34:33] Leaving Run
[08:34:38] - Writing 100154759 bytes of core data to disk...
[08:34:39]   ... Done.
[08:35:55] - Shutting down core
[08:35:55] 
[08:35:55] Folding@home Core Shutdown: FINISHED_UNIT
[08:36:24] CoreStatus = 64 (100)
[08:36:24] Unit 3 finished with 61 percent of time to deadline remaining.
[08:36:24] Updated performance fraction: 0.761596
[08:36:24] Sending work to server
[08:36:24] Project: 6900 (Run 60, Clone 18, Gen 1)


[08:36:24] + Attempting to send results [June 11 08:36:24 UTC]
[08:36:24] - Reading file work/wuresults_03.dat from core
[08:36:24]   (Read 100154759 bytes from disk)
[08:36:24] Connecting to http://130.237.232.141:8080/
[10:07:43] Killing all core threads
[10:07:43] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[10:07:43] ***** Got a SIGTERM signal (2)
[10:07:43] Killing all core threads
[10:07:43] Could not get process id information.  Please kill core process manually
Folding@Home Client Shutdown.

Code: Select all

Note: Please read the license agreement (FAH6-SMP.exe -license). Further
use of this software requires that you have read and accepted this agreement.

8 cores detected
'mpiexec' is not recognized as an internal or external command,
operable program or batch file.


--- Opening Log file [June 11 10:07:50 UTC]


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Public\Documents\FAH SMP Client
Executable: C:\Users\Public\Documents\FAH SMP Client\FAH6-SMP.exe
Arguments: -smp 7 -bigadv -verbosity 9

[10:07:50] - Ask before connecting: No
[10:07:50] - User name: GreyWhiskers (Team 0)
[10:07:50] - User ID: 51EA5C9A7EF9D58E
[10:07:50] - Machine ID: 2
[10:07:50]
[10:07:51] Loaded queue successfully.
[10:07:51] - Preparing to get new work unit...
[10:07:51] - Autosending finished units... [June 11 10:07:51 UTC]
[10:07:51] Cleaning up work directory
[10:07:51] Trying to send all finished work units
[10:07:51] Project: 6900 (Run 60, Clone 18, Gen 1)


[10:07:51] + Attempting to send results [June 11 10:07:51 UTC]
[10:07:51] - Reading file work/wuresults_03.dat from core
[10:07:51]   (Read 100154759 bytes from disk)
[10:07:51] Connecting to http://130.237.232.141:8080/
[10:07:52] + Attempting to get work packet
[10:07:52] Passkey found
[10:07:52] - Will indicate memory of 4076 MB
[10:07:52] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7

[10:07:52] - Connecting to assignment server
[10:07:52] Connecting to http://assign.stanford.edu:8080/
[10:07:52] Posted data.
[10:07:52] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[10:07:52] + News From Folding@Home: Welcome to Folding@Home
[10:07:52] Loaded queue successfully.
[10:07:52] Sent data
[10:07:52] Connecting to http://171.67.108.22:8080/
[10:08:03] Posted data.
[10:08:03] Initial: 0000; - Receiving payload (expected size: 24677422)
[10:08:14] - Downloaded at ~2190 kB/s
[10:08:14] - Averaged speed for that direction ~1111 kB/s
[10:08:14] + Received work.
[10:08:14] + Closed connections
[10:08:14]
[10:08:14] + Processing work unit
[10:08:14] Core required: FahCore_a5.exe
[10:08:14] Core found.
[10:08:14] Working on queue slot 04 [June 11 10:08:14 UTC]
[10:08:14] + Working ...
[10:08:14] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 04 -np 7 -che
ckpoint 15 -verbose -lifeline 5880 -version 634'

[10:08:15]
[10:08:15] *------------------------------*
[10:08:15] Folding@Home Gromacs SMP Core
[10:08:15] Version 2.27 (Mar 12, 2010)
[10:08:15]
[10:08:15] Preparing to commence simulation
[10:08:15] - Looking at optimizations...
[10:08:15] - Created dyn
[10:08:15] - Files status OK
[10:08:19] - Expanded 24676910 -> 30550665 (decompressed 123.8 percent)
[10:08:19] Called DecompressByteArray: compressed_data_size=24676910 data_size=3
0550665, decompressed_data_size=30550665 diff=0
[10:08:19] - Digital signature verified
[10:08:19]
[10:08:19] Project: 2685 (Run 0, Clone 11, Gen 132)
[10:08:19]
[10:08:19] Assembly optimizations on if available.
[10:08:19] Entering M.D.
[10:08:25] Mapping NT from 7 to 7
[10:08:27] Completed 0 out of 250002 steps  (0%)
[10:41:40] Completed 2501 out of 250002 steps  (1%)
[10:47:06] - Couldn't send HTTP request to server
[10:47:06] + Could not connect to Work Server (results)
[10:47:06]     (130.237.232.141:8080)
[10:47:06] + Retrying using alternative port
[10:47:06] Connecting to http://130.237.232.141:80/
[10:47:08] - Couldn't send HTTP request to server
[10:47:08] + Could not connect to Work Server (results)
[10:47:08]     (130.237.232.141:80)
[10:47:08] - Error: Could not transmit unit 03 (completed June 11) to work server.
[10:47:08] - 1 failed uploads of this unit.
[10:47:08]   Keeping unit 03 in queue.
[10:47:08] + Sent 0 of 1 completed units to the server
[10:47:08] - Autosend completed

ei57 · Post by **ei57** » Sat Jun 11, 2011 11:17 am

The server status for this baby says "No Response" and the alternative 130.237.165.141 does not ease the pain. Would anybody push the button?

Joshua_Mahr · Post by **Joshua_Mahr** » Sat Jun 11, 2011 11:23 am

Same thing here. I have 2 waiting to be turned in on 2 different machines. Is this going to be corrected?

Code: Select all

[10:21:38] - Couldn't send HTTP request to server
[10:21:38] + Could not connect to Work Server (results)
[10:21:38]     (130.237.232.141:8080)
[10:21:38] + Retrying using alternative port
[10:21:38] Connecting to http://130.237.232.141:80/
[10:23:02] - Couldn't send HTTP request to server
[10:23:02] + Could not connect to Work Server (results)
[10:23:03]     (130.237.232.141:80)
[10:23:03] - Error: Could not transmit unit 01 (completed June 11) to work server.
[10:23:03] - 21 failed uploads of this unit.


[10:23:03] + Attempting to send results [June 11 10:23:03 UTC]
[10:23:03] - Reading file work/wuresults_01.dat from core
[10:23:03]   (Read 100247184 bytes from disk)
[10:23:03] Connecting to http://130.237.165.141:8080/
[10:23:03] - Couldn't send HTTP request to server
[10:23:03] + Could not connect to Work Server (results)
[10:23:03]     (130.237.165.141:8080)
[10:23:03] + Retrying using alternative port
[10:23:03] Connecting to http://130.237.165.141:80/
[10:23:03] - Couldn't send HTTP request to server
[10:23:03] + Could not connect to Work Server (results)
[10:23:03]     (130.237.165.141:80)
[10:23:03]   Could not transmit unit 01 to Collection server; keeping in queue.
[10:23:03] + Sent 0 of 1 completed units to the server
[10:23:03] - Autosend completed

HaloJones · Post by **HaloJones** » Sat Jun 11, 2011 11:48 am

me too. annoying when we keep being told quick return is essential and then we can't because of no fault of our own.

EDIT: even more annoying, a forced send appears to send the entire parcel of data but then get no message back so it pauses indefinitely! So now this failed unit is affecting the next one as well.

HaloJones · Post by **HaloJones** » Sat Jun 11, 2011 11:50 am

I think they gave out units by mistake and now we have no way to return valid work.

HaloJones · Post by **HaloJones** » Sat Jun 11, 2011 1:29 pm

I know that bigadv is a beta project but why do the servers always seem to have problems at weekends then take ages to sort out. I also know Stanford isn't in the same timezone as me but it doesn't change the dissatisfaction of being in a project where speed is encouraged and then the collection servers won't do their bit.

locchoc · Post by **locchoc** » Sat Jun 11, 2011 1:52 pm

so what happened to the Finished unit? it kept in queue to send later or it has been killed?

augie · Post by **augie** » Sat Jun 11, 2011 2:14 pm

Code: Select all

[13:11:40] Project: 6979 (Run 0, Clone 7, Gen 120)
[13:11:40] 
[13:11:40] Assembly optimizations on if available.
[13:11:40] Entering M.D.
[13:11:46] Mapping NT from 8 to 8 
[13:11:46] Completed 0 out of 500000 steps  (0%)
[13:15:03] Completed 5000 out of 500000 steps  (1%)
[13:18:33] Completed 10000 out of 500000 steps  (2%)
[13:22:28] Completed 15000 out of 500000 steps  (3%)
[13:25:48] Completed 20000 out of 500000 steps  (4%)
[13:29:19] Completed 25000 out of 500000 steps  (5%)
[13:32:37] Completed 30000 out of 500000 steps  (6%)
[13:33:50] - Couldn't send HTTP request to server
[13:33:50] + Could not connect to Work Server (results)
[13:33:50]     (130.237.232.141:8080)
[13:33:50] + Retrying using alternative port
[13:33:50] Connecting to http://130.237.232.141:80/
[13:35:56] Completed 35000 out of 500000 steps  (7%)
[13:39:19] Completed 40000 out of 500000 steps  (8%)
[13:42:35] Completed 45000 out of 500000 steps  (9%)
[13:45:52] Completed 50000 out of 500000 steps  (10%)
[13:49:07] Completed 55000 out of 500000 steps  (11%)
[13:52:22] Completed 60000 out of 500000 steps  (12%)
[13:55:39] Completed 65000 out of 500000 steps  (13%)
[13:56:34] - Couldn't send HTTP request to server
[13:56:34] + Could not connect to Work Server (results)
[13:56:34]     (130.237.232.141:80)
[13:56:34] - Error: Could not transmit unit 05 (completed June 11) to work server.
[13:56:34] - 2 failed uploads of this unit.


[13:56:34] + Attempting to send results [June 11 13:56:34 UTC]
[13:56:34] - Reading file work/wuresults_05.dat from core
[13:56:34]   (Read 100118197 bytes from disk)
[13:56:34] Connecting to http://130.237.165.141:8080/
[13:56:34] - Couldn't send HTTP request to server
[13:56:34] + Could not connect to Work Server (results)
[13:56:34]     (130.237.165.141:8080)
[13:56:34] + Retrying using alternative port
[13:56:34] Connecting to http://130.237.165.141:80/
[13:56:35] - Couldn't send HTTP request to server
[13:56:35] + Could not connect to Work Server (results)
[13:56:35]     (130.237.165.141:80)
[13:56:35]   Could not transmit unit 05 to Collection server; keeping in queue.
[13:56:35] + Sent 0 of 1 completed units to the server
[13:56:35] - Autosend completed
[13:59:10] Completed 70000 out of 500000 steps  (14%)
[14:02:40] Completed 75000 out of 500000 steps  (15%)

augie · Post by **augie** » Sat Jun 11, 2011 3:15 pm

BTW, I'm not alone on this issue. I hope it gets resolved soon as I only have about 18 hrs. shelf life left on a pair of -bigadv. It would be shame to lose 140K points, let alone the science.

tjmagneto · Post by **tjmagneto** » Sat Jun 11, 2011 3:15 pm

The current connection status is "Reject."

With it being 0800 out here on the West Coast I hope somebody will be in to look at it soon.

augie · Post by **augie** » Sat Jun 11, 2011 3:19 pm

Oops, missed this thread, same issue here unfortunately.

oatey4519 · Post by **oatey4519** » Sat Jun 11, 2011 3:41 pm

Well i just finished a smaller project as that's what i seem i be getting now.
And it's trying and trying to send still.
My smaller project got sent through ok to Connecting to http://128.143.199.96:8080/ 2500+ pointer

Post by **kasson** » Sat Jun 11, 2011 3:54 pm

We're working on this server; it should be accepting returns now.

Folding Forum

130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: Project: 6900 (Run 12, Clone 1, Gen 3) failed upload

Re: 130.237.232.141 (P6900 unable to upload)

Re: Project: Project: 6900 (Run 54, Clone 11, Gen 1)

Can't connect to 130.237.165.141 to upload

Re: Can't connect to 130.237.165.141 to upload

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)