171.67.108.22

Moderators: Site Moderators, FAHC Science Team

kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 171.67.108.22

Post by kasson »

It is, just not to you, perhaps the reason could be if you've failed a lot of work units on the server lately.
noorman
Posts: 270
Joined: Sun Dec 02, 2007 2:26 pm
Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+
Location: Belgium, near the International Sea-Port of Antwerp

Re: 171.67.108.22

Post by noorman »

kasson wrote:It is, just not to you, perhaps the reason could be if you've failed a lot of work units on the server lately.
.


Shouldn't this be 'visible' in your Stats ?
The owner says there were not a series of EUE's previously on that machine, nor on others ...


.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
sco01
Posts: 79
Joined: Sun Mar 21, 2010 8:52 pm
Hardware configuration: Core i7 3930K(C2)@4,2 (1.30v)
Swiftech Apogee Drive II + MCR-H220 Radiator
Asus P9X79
4*4Gb SEC 1600@1866 1.5v
GeForce GTX780ti ref (nztx G10+zalman lq315)
Creative X-Fi Titanium Fatal1ty
Lite-On iHAS124-34
HDD- WD3000GLFS + 2*Hitaсhi HDS723030BLE640 + 2*HDT721010SLA360
case-Corsair Obsidian 700D
PSU - Seasonic Platinum 860W (SS-860XP2)

2) Xeon E5645@4Ghz (1,34v)
ASUS P6T
Thermalright Silver Arrow
Corsair TR3X6G1600C7 (3x2048Mb, 7-7-7-20 1,62v)
GeForce GTX780 ref (nztx G10+corsair H75)
Zotac GTX980 AMP! Edition (ZT-90204-10P)
Hitachi 320Gb HTS543232A7A384
case - Chieftec LBX-03B Dremel edition :-)
PSU - Zalman ZM-850HP+ (Enhance silver)

APC SUA1500RMI2U
APC SUA1500RMI2U

Re: 171.67.108.22

Post by sco01 »

can't send WU
[06:07:45] - Ask before connecting: No
[06:07:45] - User name: sco01 (Team 47191)
[06:07:45] - User ID: 73DD4D0E6C8679AD
[06:07:45] - Machine ID: 4
[06:07:45]
[06:07:45] Loaded queue successfully.
[06:07:45] Attempting to return result(s) to server...
[06:07:45] Trying to send all finished work units
[06:07:45] Project: 2685 (Run 2, Clone 11, Gen 31)


[06:07:45] + Attempting to send results [September 29 06:07:45 UTC]
[06:07:45] - Reading file work/wuresults_03.dat from core
[06:07:47] (Read 107237340 bytes from disk)
[06:07:47] Connecting to http://171.67.108.22:8080/
[06:07:47] - Couldn't send HTTP request to server
[06:07:47] + Could not connect to Work Server (results)
[06:07:47] (171.67.108.22:8080)
[06:07:47] + Retrying using alternative port
[06:07:47] Connecting to http://171.67.108.22:80/
[06:07:48] - Couldn't send HTTP request to server
[06:07:48] + Could not connect to Work Server (results)
[06:07:48] (171.67.108.22:80)
[06:07:48] - Error: Could not transmit unit 03 (completed September 29) to work server.
[06:07:48] - 10 failed uploads of this unit.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.67.108.22

Post by bruce »

Project: 2685 (Run 2, Clone 11, Gen 31) was added to the stats database on 2010-09-29 07:10:16 UTC for 64655.1 points of credit.

You were just a little too impatient. It obviously uploaded in time for the next stats update.
bollix47
Posts: 2957
Joined: Sun Dec 02, 2007 5:04 am
Location: Canada

Re: 171.67.108.22

Post by bollix47 »

Net load = 100 for a while now

Can't upload results

Not sure if this server has the same script running as .56 so I'm reporting the situation FYI

Code: Select all

[15:47:56] + Attempting to send results [November 6 15:47:56 UTC]
[15:47:56] - Reading file work/wuresults_03.dat from core
[15:47:56] Working on queue slot 04 [November 6 15:47:56 UTC]
[15:47:56]   (Read 106609179 bytes from disk)
[15:47:56] + Working ...
[15:47:56] Connecting to http://171.67.108.22:8080/
[15:47:56] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 04 -np 15 -priority 96 -checkpoint 15 -verbose -lifeline 2092 -version 630'

[15:47:56] 
[15:47:56] *------------------------------*
[15:47:56] Folding@Home Gromacs SMP Core
[15:47:56] Version 2.22 (Mar 12, 2010)
[15:47:56] 
[15:47:56] Preparing to commence simulation
[15:47:56] - Ensuring status. Please wait.
[15:47:56] - Couldn't send HTTP request to server
[15:47:56]   (Got status 503)
[15:47:56] + Could not connect to Work Server (results)
[15:47:56]     (171.67.108.22:8080)
[15:47:56] + Retrying using alternative port
[15:47:56] Connecting to http://171.67.108.22:80/
[15:47:56] - Couldn't send HTTP request to server
[15:47:56]   (Got status 503)
[15:47:56] + Could not connect to Work Server (results)
[15:47:56]     (171.67.108.22:80)
[15:47:56] - Error: Could not transmit unit 03 (completed November 6) to work server.
[15:47:56] - 5 failed uploads of this unit.


[15:47:56] + Attempting to send results [November 6 15:47:56 UTC]
[15:47:56] - Reading file work/wuresults_03.dat from core
[15:47:56]   (Read 106609179 bytes from disk)
[15:47:56] Connecting to http://171.67.108.25:8080/
[15:47:57] - Couldn't send HTTP request to server
[15:47:57]   (Got status 503)
[15:47:57] + Could not connect to Work Server (results)
[15:47:57]     (171.67.108.25:8080)
[15:47:57] + Retrying using alternative port
[15:47:57] Connecting to http://171.67.108.25:80/
[15:47:57] - Couldn't send HTTP request to server
[15:47:57]   (Got status 503)
[15:47:57] + Could not connect to Work Server (results)
[15:47:57]     (171.67.108.25:80)
[15:47:57]   Could not transmit unit 03 to Collection server; keeping in queue.
[15:47:57] + Sent 0 of 1 completed units to the server
[15:47:57] - Autosend completed
Image
noorman
Posts: 270
Joined: Sun Dec 02, 2007 2:26 pm
Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+
Location: Belgium, near the International Sea-Port of Antwerp

Re: 171.67.108.22

Post by noorman »

.

'status 503' is a 'too busy' message from the server ...

EDIT: I just tested the connection to that server via the webbrowser technique and got NO response from it on port 8080, nor on alternative port 80 ...

.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
Grandpa_01
Posts: 1122
Joined: Wed Mar 04, 2009 7:36 am
Hardware configuration: 3 - Supermicro H8QGi-F AMD MC 6174=144 cores 2.5Ghz, 96GB G.Skill DDR3 1333Mhz Ubuntu 10.10
2 - Asus P6X58D-E i7 980X 4.4Ghz 6GB DDR3 2000 A-Data 64GB SSD Ubuntu 10.10
1 - Asus Rampage Gene III 17 970 4.3Ghz DDR3 2000 2-500GB Segate 7200.11 0-Raid Ubuntu 10.10
1 - Asus G73JH Laptop i7 740QM 1.86Ghz ATI 5870M

Re: 171.67.108.22

Post by Grandpa_01 »

Is any body around today to go kick this puppy ? I have a 2684 bigadv WU that has been trying too upload for several hours now. :(
Image
2 - SM H8QGi-F AMD 6xxx=112 cores @ 3.2 & 3.9Ghz
5 - SM X9QRI-f+ Intel 4650 = 320 cores @ 3.15Ghz
2 - I7 980X 4.4Ghz 2-GTX680
1 - 2700k 4.4Ghz GTX680
Total = 464 cores folding
noorman
Posts: 270
Joined: Sun Dec 02, 2007 2:26 pm
Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+
Location: Belgium, near the International Sea-Port of Antwerp

Re: 171.67.108.22

Post by noorman »

.

PM'ed Dr Kasson

.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 171.67.108.22

Post by kasson »

The server code auto-restarted about two hours ago and appears to be running smoothly right now. Please post if there are additional problems...
Grandpa_01
Posts: 1122
Joined: Wed Mar 04, 2009 7:36 am
Hardware configuration: 3 - Supermicro H8QGi-F AMD MC 6174=144 cores 2.5Ghz, 96GB G.Skill DDR3 1333Mhz Ubuntu 10.10
2 - Asus P6X58D-E i7 980X 4.4Ghz 6GB DDR3 2000 A-Data 64GB SSD Ubuntu 10.10
1 - Asus Rampage Gene III 17 970 4.3Ghz DDR3 2000 2-500GB Segate 7200.11 0-Raid Ubuntu 10.10
1 - Asus G73JH Laptop i7 740QM 1.86Ghz ATI 5870M

Re: 171.67.108.22

Post by Grandpa_01 »

Thanks for letting us know I restarted the client and it has been sent now so all appears to be working again.
Image
2 - SM H8QGi-F AMD 6xxx=112 cores @ 3.2 & 3.9Ghz
5 - SM X9QRI-f+ Intel 4650 = 320 cores @ 3.15Ghz
2 - I7 980X 4.4Ghz 2-GTX680
1 - 2700k 4.4Ghz GTX680
Total = 464 cores folding
Mortlake
Posts: 4
Joined: Sat Jul 19, 2008 7:22 pm

Re: 171.67.108.22

Post by Mortlake »

seems to be playing up again - been trying to upload a bigadv wu for a couple of hours now
[01:05:29] - Couldn't send HTTP request to server
[01:05:29] + Could not connect to Work Server (results)
[01:05:29] (171.67.108.22:8080)
[01:05:29] + Retrying using alternative port
[01:05:29] Connecting to http://171.67.108.22:80/
[01:05:29] - Couldn't send HTTP request to server
[01:05:29] + Could not connect to Work Server (results)
[01:05:29] (171.67.108.22:80)
[01:05:29] - Error: Could not transmit unit 03 (completed November 9) to work server.
[01:05:29] - 5 failed uploads of this unit.
Image
Grandpa_01
Posts: 1122
Joined: Wed Mar 04, 2009 7:36 am
Hardware configuration: 3 - Supermicro H8QGi-F AMD MC 6174=144 cores 2.5Ghz, 96GB G.Skill DDR3 1333Mhz Ubuntu 10.10
2 - Asus P6X58D-E i7 980X 4.4Ghz 6GB DDR3 2000 A-Data 64GB SSD Ubuntu 10.10
1 - Asus Rampage Gene III 17 970 4.3Ghz DDR3 2000 2-500GB Segate 7200.11 0-Raid Ubuntu 10.10
1 - Asus G73JH Laptop i7 740QM 1.86Ghz ATI 5870M

Re: 171.67.108.22

Post by Grandpa_01 »

Yep it is time to kick it again.
Image
2 - SM H8QGi-F AMD 6xxx=112 cores @ 3.2 & 3.9Ghz
5 - SM X9QRI-f+ Intel 4650 = 320 cores @ 3.15Ghz
2 - I7 980X 4.4Ghz 2-GTX680
1 - 2700k 4.4Ghz GTX680
Total = 464 cores folding
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.67.108.22

Post by bruce »

Ping sent, but it's late. My guess is it'll get fixed early tomorrow but I have no way to predict.
Grandpa_01
Posts: 1122
Joined: Wed Mar 04, 2009 7:36 am
Hardware configuration: 3 - Supermicro H8QGi-F AMD MC 6174=144 cores 2.5Ghz, 96GB G.Skill DDR3 1333Mhz Ubuntu 10.10
2 - Asus P6X58D-E i7 980X 4.4Ghz 6GB DDR3 2000 A-Data 64GB SSD Ubuntu 10.10
1 - Asus Rampage Gene III 17 970 4.3Ghz DDR3 2000 2-500GB Segate 7200.11 0-Raid Ubuntu 10.10
1 - Asus G73JH Laptop i7 740QM 1.86Ghz ATI 5870M

Re: 171.67.108.22

Post by Grandpa_01 »

It is working again
Image
2 - SM H8QGi-F AMD 6xxx=112 cores @ 3.2 & 3.9Ghz
5 - SM X9QRI-f+ Intel 4650 = 320 cores @ 3.15Ghz
2 - I7 980X 4.4Ghz 2-GTX680
1 - 2700k 4.4Ghz GTX680
Total = 464 cores folding
sco01
Posts: 79
Joined: Sun Mar 21, 2010 8:52 pm
Hardware configuration: Core i7 3930K(C2)@4,2 (1.30v)
Swiftech Apogee Drive II + MCR-H220 Radiator
Asus P9X79
4*4Gb SEC 1600@1866 1.5v
GeForce GTX780ti ref (nztx G10+zalman lq315)
Creative X-Fi Titanium Fatal1ty
Lite-On iHAS124-34
HDD- WD3000GLFS + 2*Hitaсhi HDS723030BLE640 + 2*HDT721010SLA360
case-Corsair Obsidian 700D
PSU - Seasonic Platinum 860W (SS-860XP2)

2) Xeon E5645@4Ghz (1,34v)
ASUS P6T
Thermalright Silver Arrow
Corsair TR3X6G1600C7 (3x2048Mb, 7-7-7-20 1,62v)
GeForce GTX780 ref (nztx G10+corsair H75)
Zotac GTX980 AMP! Edition (ZT-90204-10P)
Hitachi 320Gb HTS543232A7A384
case - Chieftec LBX-03B Dremel edition :-)
PSU - Zalman ZM-850HP+ (Enhance silver)

APC SUA1500RMI2U
APC SUA1500RMI2U

Re: 171.67.108.22

Post by sco01 »

ranked network load of 33%. I can not send two o'clock successful job 2686..
Post Reply