171.67.108.21 is Reject;
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 270
- Joined: Sun Dec 02, 2007 2:26 pm
- Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+ - Location: Belgium, near the International Sea-Port of Antwerp
Re: 171.67.108.21 is Reject;
.
PM sent to Pande Group, V.P.
.
PM sent to Pande Group, V.P.
.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
....................................
Folded since 10-06-04 till 09-2010
-
- Posts: 94
- Joined: Wed Dec 05, 2007 10:23 pm
- Hardware configuration: Apple Mac Pro 1,1 2x2.66 GHz Dual-Core Xeon w/10 GB RAM | EVGA GTX 960, Zotac GTX 750 Ti | Ubuntu 14.04 LTS
Dell Precision T7400 2x3.0 GHz Quad-Core Xeon w/16 GB RAM | Zotac GTX 970 | Ubuntu 14.04 LTS
Apple iMac Retina 5K 4.00 GHz Core i7 w/8 GB RAM | OS X 10.11.3 (El Capitan) - Location: Michiana, USA
Re: 171.67.108.21 is Reject;
I think 171.67.108.21 needs a Boot to the Head!
Looking back, nVIDIA Clients the world over will refer to this as the St. Valentine's Day Points Massacre...
Looking back, nVIDIA Clients the world over will refer to this as the St. Valentine's Day Points Massacre...
-
- Pande Group Member
- Posts: 2058
- Joined: Fri Nov 30, 2007 6:25 am
- Location: Stanford
Re: 171.67.108.21 is Reject;
Thanks for the posts. It's early AM in Califorina (that's why this went unfixed for several hours), but I think we've got everything going again. I've contacted Joe regarding this issue: there was a WS bug.
I've also balanced the weights so the other NV WS's can get into the mix better and improve the redundancy.
I've also balanced the weights so the other NV WS's can get into the mix better and improve the redundancy.
Prof. Vijay Pande, PhD
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
-
- Posts: 270
- Joined: Sun Dec 02, 2007 2:26 pm
- Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+ - Location: Belgium, near the International Sea-Port of Antwerp
Re: 171.67.108.21 is Reject;
.
Things seem to be coming 'online' again indeed; I restarted my GPU-client a few minutes ago and it got a new P10105 project from another server ...
It 's working again / thanks Professor
.
Things seem to be coming 'online' again indeed; I restarted my GPU-client a few minutes ago and it got a new P10105 project from another server ...
It 's working again / thanks Professor
.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
....................................
Folded since 10-06-04 till 09-2010
-
- Posts: 58
- Joined: Wed Feb 13, 2008 3:10 am
Re: 171.67.108.21 is Reject;
Thanks Vijay!!!VijayPande wrote:Thanks for the posts. It's early AM in Califorina (that's why this went unfixed for several hours), but I think we've got everything going again. I've contacted Joe regarding this issue: there was a WS bug.
I've also balanced the weights so the other NV WS's can get into the mix better and improve the redundancy.
-
- Posts: 460
- Joined: Sun Dec 02, 2007 10:15 pm
- Location: Michigan
Re: 171.67.108.21 is Reject;
My issue hasn't been a lack of work, but rather my completed WUs uploading to a black hole. Reviewing recent logs show no long idle periods. With very few exceptions, the WUs upload immediately. The problem is that I am running 4 quads with 9 GPU clients, each box getting between 15K and 28K PPD, but my total yesterday was 17K, rather than the "normal" 70K+. Today is following yesterday, point-wise. I seem to only be receiving the SMP2 points.
Is this server talking to the stats server?
Is this server talking to the stats server?
Proud to crash my machines as a Beta Tester!
Re: 171.67.108.21 is Reject;
All are working now. Thanks much!
-
- Posts: 270
- Joined: Sun Dec 02, 2007 2:26 pm
- Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+ - Location: Belgium, near the International Sea-Port of Antwerp
Re: 171.67.108.21 is Reject;
.uncle fuzzy wrote:My issue hasn't been a lack of work, but rather my completed WUs uploading to a black hole. Reviewing recent logs show no long idle periods. With very few exceptions, the WUs upload immediately. The problem is that I am running 4 quads with 9 GPU clients, each box getting between 15K and 28K PPD, but my total yesterday was 17K, rather than the "normal" 70K+. Today is following yesterday, point-wise. I seem to only be receiving the SMP2 points.
Is this server talking to the stats server?
Maybe something you ought to communicate to the Pande Group ...
.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
....................................
Folded since 10-06-04 till 09-2010
Re: 171.67.108.21 is Reject;
Code: Select all
[23:40:32] + Attempting to send results [February 15 23:40:32 UTC]
[23:40:32] - Reading file work/wuresults_04.dat from core
[23:40:32] (Read 167567 bytes from disk)
[23:40:32] Connecting to http://171.67.108.21:8080/
[23:47:10] Completed 68%
[23:47:24] - Couldn't send HTTP request to server
[23:47:24] + Could not connect to Work Server (results)
[23:47:24] (171.67.108.21:8080)
[23:47:24] + Retrying using alternative port
[23:47:24] Connecting to http://171.67.108.21:80/
[23:50:33] - Couldn't send HTTP request to server
[23:50:33] + Could not connect to Work Server (results)
[23:50:33] (171.67.108.21:80)
[23:50:33] - Error: Could not transmit unit 04 (completed February 15) to work server.
[23:50:33] - 6 failed uploads of this unit.
[23:50:33] - Read packet limit of 540015616... Set to 524286976.
[23:50:33] + Attempting to send results [February 15 23:50:33 UTC]
[23:50:33] - Reading file work/wuresults_04.dat from core
[23:50:33] (Read 167567 bytes from disk)
[23:50:33] Connecting to http://171.67.108.26:8080/
[23:53:33] Completed 69%
[23:59:38] Completed 70%
[00:06:39] Completed 71%
[00:12:50] Completed 72%
[00:19:24] Completed 73%
[00:20:20] Posted data.
[00:20:20] Initial: 0000; - Uploaded at ~0 kB/s
[00:20:20] - Averaged speed for that direction ~18 kB/s
[00:20:20] - Server does not have record of this unit. Will try again later.
[00:20:20] Could not transmit unit 04 to Collection server; keeping in queue.
[00:20:20] + Sent 0 of 1 completed units to the server
[00:20:20] - Autosend completed
In the beginning, the Universe was created. This made a lot of people angry, and has been widely regarded as a bad move.
[url=irc://irc.freenode.net/#folding@home]#folding@home[/url] on irc.freenode.net
[url=irc://irc.freenode.net/#folding@home]#folding@home[/url] on irc.freenode.net
-
- Posts: 94
- Joined: Wed Dec 05, 2007 10:23 pm
- Hardware configuration: Apple Mac Pro 1,1 2x2.66 GHz Dual-Core Xeon w/10 GB RAM | EVGA GTX 960, Zotac GTX 750 Ti | Ubuntu 14.04 LTS
Dell Precision T7400 2x3.0 GHz Quad-Core Xeon w/16 GB RAM | Zotac GTX 970 | Ubuntu 14.04 LTS
Apple iMac Retina 5K 4.00 GHz Core i7 w/8 GB RAM | OS X 10.11.3 (El Capitan) - Location: Michiana, USA
Re: 171.67.108.21 is Reject;
I, too, have a WU that I can't upload to 171.67.108.26:8080. When I try going to the port in Firefox, it just sits there. The Stats pages shows the server as Accepting, but the Net Load is 388. Maybe I just need to be patient...
Oh, that can't be good... "Server does not have record of this unit. Will try again later."
Code: Select all
[01:53:06] + Attempting to send results [February 16 01:53:06 UTC]
[01:53:06] - Reading file work/wuresults_03.dat from core
[01:53:06] (Read 65624 bytes from disk)
[01:53:06] Connecting to http://171.67.108.21:8080/
[01:53:08] Posted data.
[01:53:08] Initial: 0000; - Uploaded at ~32 kB/s
[01:53:08] - Averaged speed for that direction ~48 kB/s
[01:53:08] - Server does not have record of this unit. Will try again later.
[01:53:08] - Error: Could not transmit unit 03 (completed February 16) to work server.
[01:53:08] - 1 failed uploads of this unit.
[01:53:08] Keeping unit 03 in queue.
[01:53:08] Trying to send all finished work units
[01:53:08] Project: 3470 (Run 24, Clone 149, Gen 0)
[01:53:08] - Read packet limit of 540015616... Set to 524286976.
[01:53:08] + Attempting to send results [February 16 01:53:08 UTC]
[01:53:08] - Reading file work/wuresults_03.dat from core
[01:53:08] (Read 65624 bytes from disk)
[01:53:08] Connecting to http://171.67.108.21:8080/
[01:53:09] Posted data.
[01:53:09] Initial: 0000; - Uploaded at ~65 kB/s
[01:53:09] - Averaged speed for that direction ~51 kB/s
[01:53:09] - Server does not have record of this unit. Will try again later.
[01:53:09] - Error: Could not transmit unit 03 (completed February 16) to work server.
[01:53:09] - 2 failed uploads of this unit.
[01:53:09] - Read packet limit of 540015616... Set to 524286976.
[01:53:09] + Attempting to send results [February 16 01:53:09 UTC]
[01:53:09] - Reading file work/wuresults_03.dat from core
[01:53:09] (Read 65624 bytes from disk)
[01:53:09] Connecting to http://171.67.108.26:8080/
[01:58:21] Posted data.
-
- Posts: 94
- Joined: Wed Dec 05, 2007 10:23 pm
- Hardware configuration: Apple Mac Pro 1,1 2x2.66 GHz Dual-Core Xeon w/10 GB RAM | EVGA GTX 960, Zotac GTX 750 Ti | Ubuntu 14.04 LTS
Dell Precision T7400 2x3.0 GHz Quad-Core Xeon w/16 GB RAM | Zotac GTX 970 | Ubuntu 14.04 LTS
Apple iMac Retina 5K 4.00 GHz Core i7 w/8 GB RAM | OS X 10.11.3 (El Capitan) - Location: Michiana, USA
Re: 171.67.108.21 is Reject;
Looks like all is well now:Foxbat wrote:Oh, that can't be good... "Server does not have record of this unit. Will try again later."
Code: Select all
[02:12:27] Trying to send all finished work units
[02:12:27] Project: 3470 (Run 24, Clone 149, Gen 0)
[02:12:27] - Read packet limit of 540015616... Set to 524286976.
[02:12:27] + Attempting to send results [February 16 02:12:27 UTC]
[02:12:27] - Reading file work/wuresults_03.dat from core
[02:12:27] (Read 65624 bytes from disk)
[02:12:27] Connecting to http://171.67.108.21:8080/
[02:12:28] Posted data.
[02:12:28] Initial: 0000; - Uploaded at ~65 kB/s
[02:12:28] - Averaged speed for that direction ~54 kB/s
[02:12:28] + Results successfully sent
[02:12:28] Thank you for your contribution to Folding@Home.
[02:12:28] + Number of Units Completed: 3802
[02:12:28] + Sent 1 of 1 completed units to the server
[02:12:28] + Closed connections
Re: 171.67.108.21 is Reject;
Still a problem here:
Code: Select all
[12:27:49] - Autosending finished units... [February 16 12:27:49 UTC]
[12:27:49] Trying to send all finished work units
[12:27:49] Project: 5785 (Run 3, Clone 52, Gen 17)
[12:27:49] - Read packet limit of 540015616... Set to 524286976.
[12:27:49] + Attempting to send results [February 16 12:27:49 UTC]
[12:27:49] - Reading file work/wuresults_04.dat from core
[12:27:49] (Read 167567 bytes from disk)
[12:27:49] Connecting to http://171.67.108.21:8080/
[12:27:51] - Couldn't send HTTP request to server
[12:27:51] + Could not connect to Work Server (results)
[12:27:51] (171.67.108.21:8080)
[12:27:51] + Retrying using alternative port
[12:27:51] Connecting to http://171.67.108.21:80/
[12:29:34] Completed 67%
[12:31:00] - Couldn't send HTTP request to server
[12:31:00] + Could not connect to Work Server (results)
[12:31:00] (171.67.108.21:80)
[12:31:00] - Error: Could not transmit unit 04 (completed February 15) to work server.
[12:31:00] - 10 failed uploads of this unit.
[12:31:00] - Read packet limit of 540015616... Set to 524286976.
[12:31:00] + Attempting to send results [February 16 12:31:00 UTC]
[12:31:00] - Reading file work/wuresults_04.dat from core
[12:31:00] (Read 167567 bytes from disk)
[12:31:00] Connecting to http://171.67.108.26:8080/
[12:35:49] - Couldn't send HTTP request to server
[12:35:49] + Could not connect to Work Server (results)
[12:35:49] (171.67.108.26:8080)
[12:35:49] + Retrying using alternative port
[12:35:49] Connecting to http://171.67.108.26:80/
[12:35:50] - Couldn't send HTTP request to server
[12:35:50] + Could not connect to Work Server (results)
[12:35:50] (171.67.108.26:80)
[12:35:50] Could not transmit unit 04 to Collection server; keeping in queue.
[12:35:50] + Sent 0 of 1 completed units to the server
[12:35:50] - Autosend completed
In the beginning, the Universe was created. This made a lot of people angry, and has been widely regarded as a bad move.
[url=irc://irc.freenode.net/#folding@home]#folding@home[/url] on irc.freenode.net
[url=irc://irc.freenode.net/#folding@home]#folding@home[/url] on irc.freenode.net
-
- Posts: 270
- Joined: Sun Dec 02, 2007 2:26 pm
- Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+ - Location: Belgium, near the International Sea-Port of Antwerp
Re: 171.67.108.21 is Reject;
.
171.67.108.26 is CS6 and it is currently highly loaded on its Network.
Message on that has been sent (earlier), but the time difference means that Stanford is just awakening ...
.
171.67.108.26 is CS6 and it is currently highly loaded on its Network.
Message on that has been sent (earlier), but the time difference means that Stanford is just awakening ...
.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
....................................
Folded since 10-06-04 till 09-2010
-
- Posts: 270
- Joined: Sun Dec 02, 2007 2:26 pm
- Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+ - Location: Belgium, near the International Sea-Port of Antwerp
Re: 171.67.108.21 is Reject;
.
CS6 is now in REJECT ...
EDIT: Accepting again ...
.
CS6 is now in REJECT ...
EDIT: Accepting again ...
.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
....................................
Folded since 10-06-04 till 09-2010
Re: 171.67.108.21 is Reject;
Please watch for further updates here viewtopic.php?f=24&t=13474
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.