GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26

[shunter]

I'm now up to 11 lost units plus another 4 5781's to finish in the next hour or so which will probably go the same way as the others so I'm shutting down GPU folding until this is resolved as I seem to be wasting time and money here. My last unit accepted was a 5781 at 5.22 am this morning and the log of that is below. It shows "- Read packet limit of 540015616... Set to 524286976" yet this was successful and my units total increased.
Rgds
Shunter.

[05:22:04] Folding@home Core Shutdown: FINISHED_UNIT

[05:22:07] CoreStatus = 64 (100)

[05:22:07] Unit 6 finished with 99 percent of time to deadline remaining.

[05:22:07] Updated performance fraction: 0.983509

[05:22:07] Sending work to server

[05:22:07] Project: 5781 (Run 16, Clone 59, Gen 3)

[05:22:07] - Read packet limit of 540015616... Set to 524286976.





[05:22:07] + Attempting to send results [February 14 05:22:07 UTC]

[05:22:07] - Reading file work/wuresults_06.dat from core

[05:22:07] (Read 169001 bytes from disk)

[05:22:07] Connecting to http://171.67.108.21:8080/

[05:22:10] Posted data.

[05:22:10] Initial: 0000; - Uploaded at ~55 kB/s

[05:22:10] - Averaged speed for that direction ~44 kB/s

[05:22:10] + Results successfully sent

[05:22:10] Thank you for your contribution to Folding@Home.

[05:22:10] + Number of Units Completed: 1932

[SnW]

I find it weird no ADMIN/STAFF has replied in here yet ?!
ITS NOT LIKE ITS A SMALL PROBLEM ..

Sorry crapslock....

[tobor]

Yes it is weird no Staff/Admin have replied to this ???
It's not like this just started today either. I was having probs last week along with others.

What gets me the server page shows all these servers are accepting ???

[DrSpalding]

I have the same issue with both of my GPU clients:

1:

Code: Select all

[08:40:59] Folding@home Core Shutdown: FINISHED_UNIT
[08:41:02] CoreStatus = 64 (100)
[08:41:02] Sending work to server
[08:41:02] Project: 5781 (Run 15, Clone 764, Gen 3)
[08:41:02] - Read packet limit of 540015616... Set to 524286976.

[08:41:02] + Attempting to send results [February 14 08:41:02 UTC]
[08:41:03] - Couldn't send HTTP request to server
[08:41:03] + Could not connect to Work Server (results)
[08:41:03]     (171.67.108.21:8080)
[08:41:03] + Retrying using alternative port
[08:41:24] - Couldn't send HTTP request to server
[08:41:24] + Could not connect to Work Server (results)
[08:41:24]     (171.67.108.21:80)
[08:41:24] - Error: Could not transmit unit 08 (completed February 14) to work server.
[08:41:24]   Keeping unit 08 in queue.
[08:41:24] Project: 5781 (Run 15, Clone 764, Gen 3)
[08:41:24] - Read packet limit of 540015616... Set to 524286976.


[08:41:24] + Attempting to send results [February 14 08:41:24 UTC]
[08:41:25] - Server has already received unit.
[08:41:25] - Preparing to get new work unit...
[08:41:25] + Attempting to get work packet
[08:41:25] - Connecting to assignment server
[08:41:25] - Successful: assigned to (171.67.108.21).
[08:41:25] + News From Folding@Home: Welcome to Folding@Home
[08:41:25] Loaded queue successfully.
[08:41:26] + Closed connections

2:

Code: Select all

[08:50:40] Folding@home Core Shutdown: FINISHED_UNIT
[08:50:43] CoreStatus = 64 (100)
[08:50:43] Sending work to server
[08:50:43] Project: 3470 (Run 14, Clone 112, Gen 2)
[08:50:43] - Read packet limit of 540015616... Set to 524286976.


[08:50:43] + Attempting to send results [February 14 08:50:43 UTC]
[08:50:43] - Couldn't send HTTP request to server
[08:50:43] + Could not connect to Work Server (results)
[08:50:43]     (171.67.108.21:8080)
[08:50:43] + Retrying using alternative port
[08:51:04] - Couldn't send HTTP request to server
[08:51:04] + Could not connect to Work Server (results)
[08:51:04]     (171.67.108.21:80)
[08:51:04] - Error: Could not transmit unit 03 (completed February 14) to work server.
[08:51:04]   Keeping unit 03 in queue.
[08:51:04] Project: 3470 (Run 14, Clone 112, Gen 2)
[08:51:04] - Read packet limit of 540015616... Set to 524286976.


[08:51:04] + Attempting to send results [February 14 08:51:04 UTC]
[08:51:05] - Server has already received unit.
[08:51:05] - Preparing to get new work unit...
[08:51:05] + Attempting to get work packet
[08:51:05] - Connecting to assignment server
[08:51:05] - Successful: assigned to (171.67.108.21).
[08:51:05] + News From Folding@Home: Welcome to Folding@Home
[08:51:05] Loaded queue successfully.
[08:51:05] + Closed connections

Client #1 now has three and Client #2 has six of these "not sent" but "already received" WUs. I am thinking I should stop the clients until the issue is cleared up so I can hopefully upload the results that are still valid in the client's work directories.

[spike09]

Same here on both GPU2 clients

[SnW]

I guess they don't care people STOP their GPU's and or the lost WU's that are going around
this is going on for a few days now ....]

EDIT aaa this is even better , now i can't get WU's either , great..........

[DrSpalding]

If I had some assurance that I could actually get these WUs uploaded successfully, I would simply archive the data (FAHlog*.txt, queue.dat and work/*) and motor onward for 12 hours at a stretch and then do it again. W/o an assurance that Stanford's science and our contribution is actually the result of our wattage use, I will wait until we hear word on it. I am not going to begrudge Pande Group taking Valentine's Day off either. Everybody needs somebody.

[jima13]

Same here on both GPU2 clients

Same here on 7GPU's...checked a few log's and it appears to have started after 06:00:00UTC Feb14

[Tobit]

I am not going to begrudge Pande Group taking Valentine's Day off either. Everybody needs somebody.

It is also Presidents Day tomorrow.. why do these things always happen when no one is around?

[chriskwarren]

171.67.108.21 is giving me the same problems as others here, and some folders on my team are reporting the same.

Any update?

[BuddhaChu]

171.67.108.21 port 8080 responded with "OK", but it's not giving out WUs to my GPU.

This is not good (understatement of the day)

[TheWolf]

3 rigs with no work, 2x260GTX & 1x8800GTS, others will soon be.
Someone needs to fix this problem. (171.67.108.21)

[Nathan_P]

171.67.108.21 port 8080 responded with "OK", but it's not giving out WUs to my GPU.

This is not good (understatement of the day)

That server is very heavily loaded, according to the status page its currently trying to deal with 480 different connections. No wonder its going pear shaped. I've become that despondant i've even restarted the cpu client on my main rig. i wouldn't mind but i can feed my gts 250 for the same amount of juice and get much more done.

[kiore]

Well I've managed to send some of the numerous completed gpu units and have got some new work on one of my systems,5766-5771 units, so maybe things are starting to work again.

[Tobit]

3 rigs with no work, 2x260GTX & 1x8800GTS, others will soon be.
Someone needs to fix this problem. (171.67.108.21)

It's a holiday weekend in the US, don't expect a quick fix.