GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Moderators: Site Moderators, FAHC Science Team
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
I'm now up to 11 lost units plus another 4 5781's to finish in the next hour or so which will probably go the same way as the others so I'm shutting down GPU folding until this is resolved as I seem to be wasting time and money here. My last unit accepted was a 5781 at 5.22 am this morning and the log of that is below. It shows "- Read packet limit of 540015616... Set to 524286976" yet this was successful and my units total increased.
Rgds
Shunter.
[05:22:04] Folding@home Core Shutdown: FINISHED_UNIT
[05:22:07] CoreStatus = 64 (100)
[05:22:07] Unit 6 finished with 99 percent of time to deadline remaining.
[05:22:07] Updated performance fraction: 0.983509
[05:22:07] Sending work to server
[05:22:07] Project: 5781 (Run 16, Clone 59, Gen 3)
[05:22:07] - Read packet limit of 540015616... Set to 524286976.
[05:22:07] + Attempting to send results [February 14 05:22:07 UTC]
[05:22:07] - Reading file work/wuresults_06.dat from core
[05:22:07] (Read 169001 bytes from disk)
[05:22:07] Connecting to http://171.67.108.21:8080/
[05:22:10] Posted data.
[05:22:10] Initial: 0000; - Uploaded at ~55 kB/s
[05:22:10] - Averaged speed for that direction ~44 kB/s
[05:22:10] + Results successfully sent
[05:22:10] Thank you for your contribution to Folding@Home.
[05:22:10] + Number of Units Completed: 1932
Rgds
Shunter.
[05:22:04] Folding@home Core Shutdown: FINISHED_UNIT
[05:22:07] CoreStatus = 64 (100)
[05:22:07] Unit 6 finished with 99 percent of time to deadline remaining.
[05:22:07] Updated performance fraction: 0.983509
[05:22:07] Sending work to server
[05:22:07] Project: 5781 (Run 16, Clone 59, Gen 3)
[05:22:07] - Read packet limit of 540015616... Set to 524286976.
[05:22:07] + Attempting to send results [February 14 05:22:07 UTC]
[05:22:07] - Reading file work/wuresults_06.dat from core
[05:22:07] (Read 169001 bytes from disk)
[05:22:07] Connecting to http://171.67.108.21:8080/
[05:22:10] Posted data.
[05:22:10] Initial: 0000; - Uploaded at ~55 kB/s
[05:22:10] - Averaged speed for that direction ~44 kB/s
[05:22:10] + Results successfully sent
[05:22:10] Thank you for your contribution to Folding@Home.
[05:22:10] + Number of Units Completed: 1932
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
I find it weird no ADMIN/STAFF has replied in here yet ?!
ITS NOT LIKE ITS A SMALL PROBLEM ..
Sorry crapslock....
ITS NOT LIKE ITS A SMALL PROBLEM ..
Sorry crapslock....
-
- Posts: 56
- Joined: Tue Jul 15, 2008 11:15 pm
- Hardware configuration: ASUS M3N-HT deluxe,AMD6400 duel 3.2gig, GeForce9800 GTX C-760 M-1140 S-1900,4 gig OCZ ddr
- Location: Missouri,USA
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Yes it is weird no Staff/Admin have replied to this ???
It's not like this just started today either. I was having probs last week along with others.
What gets me the server page shows all these servers are accepting ???
It's not like this just started today either. I was having probs last week along with others.
What gets me the server page shows all these servers are accepting ???
-
- Posts: 136
- Joined: Wed May 27, 2009 4:48 pm
- Hardware configuration: Dell Studio 425 MTS-Core i7-920 c0 stock
evga SLI 3x o/c Core i7-920 d0 @ 3.9GHz + nVidia GTX275
Dell 5150 + nVidia 9800GT
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
I have the same issue with both of my GPU clients:
1:
2:
Client #1 now has three and Client #2 has six of these "not sent" but "already received" WUs. I am thinking I should stop the clients until the issue is cleared up so I can hopefully upload the results that are still valid in the client's work directories.
1:
Code: Select all
[08:40:59] Folding@home Core Shutdown: FINISHED_UNIT
[08:41:02] CoreStatus = 64 (100)
[08:41:02] Sending work to server
[08:41:02] Project: 5781 (Run 15, Clone 764, Gen 3)
[08:41:02] - Read packet limit of 540015616... Set to 524286976.
[08:41:02] + Attempting to send results [February 14 08:41:02 UTC]
[08:41:03] - Couldn't send HTTP request to server
[08:41:03] + Could not connect to Work Server (results)
[08:41:03] (171.67.108.21:8080)
[08:41:03] + Retrying using alternative port
[08:41:24] - Couldn't send HTTP request to server
[08:41:24] + Could not connect to Work Server (results)
[08:41:24] (171.67.108.21:80)
[08:41:24] - Error: Could not transmit unit 08 (completed February 14) to work server.
[08:41:24] Keeping unit 08 in queue.
[08:41:24] Project: 5781 (Run 15, Clone 764, Gen 3)
[08:41:24] - Read packet limit of 540015616... Set to 524286976.
[08:41:24] + Attempting to send results [February 14 08:41:24 UTC]
[08:41:25] - Server has already received unit.
[08:41:25] - Preparing to get new work unit...
[08:41:25] + Attempting to get work packet
[08:41:25] - Connecting to assignment server
[08:41:25] - Successful: assigned to (171.67.108.21).
[08:41:25] + News From Folding@Home: Welcome to Folding@Home
[08:41:25] Loaded queue successfully.
[08:41:26] + Closed connections
Code: Select all
[08:50:40] Folding@home Core Shutdown: FINISHED_UNIT
[08:50:43] CoreStatus = 64 (100)
[08:50:43] Sending work to server
[08:50:43] Project: 3470 (Run 14, Clone 112, Gen 2)
[08:50:43] - Read packet limit of 540015616... Set to 524286976.
[08:50:43] + Attempting to send results [February 14 08:50:43 UTC]
[08:50:43] - Couldn't send HTTP request to server
[08:50:43] + Could not connect to Work Server (results)
[08:50:43] (171.67.108.21:8080)
[08:50:43] + Retrying using alternative port
[08:51:04] - Couldn't send HTTP request to server
[08:51:04] + Could not connect to Work Server (results)
[08:51:04] (171.67.108.21:80)
[08:51:04] - Error: Could not transmit unit 03 (completed February 14) to work server.
[08:51:04] Keeping unit 03 in queue.
[08:51:04] Project: 3470 (Run 14, Clone 112, Gen 2)
[08:51:04] - Read packet limit of 540015616... Set to 524286976.
[08:51:04] + Attempting to send results [February 14 08:51:04 UTC]
[08:51:05] - Server has already received unit.
[08:51:05] - Preparing to get new work unit...
[08:51:05] + Attempting to get work packet
[08:51:05] - Connecting to assignment server
[08:51:05] - Successful: assigned to (171.67.108.21).
[08:51:05] + News From Folding@Home: Welcome to Folding@Home
[08:51:05] Loaded queue successfully.
[08:51:05] + Closed connections
Client #1 now has three and Client #2 has six of these "not sent" but "already received" WUs. I am thinking I should stop the clients until the issue is cleared up so I can hopefully upload the results that are still valid in the client's work directories.
Last edited by DrSpalding on Sun Feb 14, 2010 6:59 pm, edited 1 time in total.
Not a real doctor, I just play one on the 'net!
-
- Posts: 29
- Joined: Mon Dec 03, 2007 12:04 pm
- Hardware configuration: 2 x q6600's with 2 GB pc6400 , e6400 2 Gb pc 6400, x2 3800 1Gb PC 3200, athlon 3700, 1GB pc3200, athlaon 2200 512MB pc 2700
- Location: location location
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Same here on both GPU2 clients
team 46590
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
I guess they don't care people STOP their GPU's and or the lost WU's that are going around
this is going on for a few days now ....]
EDIT aaa this is even better , now i can't get WU's either , great..........
this is going on for a few days now ....]
EDIT aaa this is even better , now i can't get WU's either , great..........
-
- Posts: 136
- Joined: Wed May 27, 2009 4:48 pm
- Hardware configuration: Dell Studio 425 MTS-Core i7-920 c0 stock
evga SLI 3x o/c Core i7-920 d0 @ 3.9GHz + nVidia GTX275
Dell 5150 + nVidia 9800GT
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
If I had some assurance that I could actually get these WUs uploaded successfully, I would simply archive the data (FAHlog*.txt, queue.dat and work/*) and motor onward for 12 hours at a stretch and then do it again. W/o an assurance that Stanford's science and our contribution is actually the result of our wattage use, I will wait until we hear word on it. I am not going to begrudge Pande Group taking Valentine's Day off either. Everybody needs somebody.
Not a real doctor, I just play one on the 'net!
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Same here on 7GPU's...checked a few log's and it appears to have started after 06:00:00UTC Feb14spike09 wrote:Same here on both GPU2 clients
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
It is also Presidents Day tomorrow.. why do these things always happen when no one is around?DrSpalding wrote:I am not going to begrudge Pande Group taking Valentine's Day off either. Everybody needs somebody.
-
- Posts: 28
- Joined: Sun Nov 30, 2008 2:13 am
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
171.67.108.21 is giving me the same problems as others here, and some folders on my team are reporting the same.
Any update?
Any update?
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
171.67.108.21 port 8080 responded with "OK", but it's not giving out WUs to my GPU.
This is not good (understatement of the day)
This is not good (understatement of the day)
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
3 rigs with no work, 2x260GTX & 1x8800GTS, others will soon be.
Someone needs to fix this problem. (171.67.108.21)
Someone needs to fix this problem. (171.67.108.21)
-
- Posts: 1164
- Joined: Wed Apr 01, 2009 9:22 pm
- Hardware configuration: Asus Z8NA D6C, 2 x5670@3.2 Ghz, , 12gb Ram, GTX 980ti, AX650 PSU, win 10 (daily use)
Asus Z87 WS, Xeon E3-1230L v3, 8gb ram, KFA GTX 1080, EVGA 750ti , AX760 PSU, Mint 18.2 OS
Not currently folding
Asus Z9PE- D8 WS, 2 E5-2665@2.3 Ghz, 16Gb 1.35v Ram, Ubuntu (Fold only)
Asus Z9PA, 2 Ivy 12 core, 16gb Ram, H folding appliance (fold only) - Location: Jersey, Channel islands
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
That server is very heavily loaded, according to the status page its currently trying to deal with 480 different connections. No wonder its going pear shaped. I've become that despondant i've even restarted the cpu client on my main rig. i wouldn't mind but i can feed my gts 250 for the same amount of juice and get much more done.BuddhaChu wrote:171.67.108.21 port 8080 responded with "OK", but it's not giving out WUs to my GPU.
This is not good (understatement of the day)
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Well I've managed to send some of the numerous completed gpu units and have got some new work on one of my systems,5766-5771 units, so maybe things are starting to work again.
i7 7800x RTX 3070 OS= win10. AMD 3700x RTX 2080ti OS= win10 .
Team page: https://www.rationalskepticism.org/viewtopic.php?t=616
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
It's a holiday weekend in the US, don't expect a quick fix.TheWolf wrote:3 rigs with no work, 2x260GTX & 1x8800GTS, others will soon be.
Someone needs to fix this problem. (171.67.108.21)