Which client should I use? GPU2 or SMP Client? See system specs below.
System Specs-
GeForce 8400GS 512mb
AMD Athlon X2 2.71 GHz
2 GB 1066 Ram
SMP or GPU2?
Moderators: Site Moderators, FAHC Science Team
-
v00d00
- Posts: 390
- Joined: Sun Dec 02, 2007 4:53 am
- Hardware configuration: FX8320e (6 cores enabled) @ stock,
- 16GB DDR3,
- Zotac GTX 1050Ti @ Stock.
- Gigabyte GTX 970 @ Stock
Debian 9.
Running GPU since it came out, CPU since client version 3.
Folding since Folding began (~2000) and ran Genome@Home for a while too.
Ran Seti@Home prior to that. - Location: UK
- Contact:
-
jrweiss
- Posts: 704
- Joined: Tue Dec 04, 2007 6:56 am
- Hardware configuration: Ryzen 7 5700G, 22.40.46 VGA driver; 32GB G-Skill Trident DDR4-3200; Samsung 860EVO 1TB Boot SSD; VelociRaptor 1TB; MSI GTX 1050ti, 551.23 studio driver; BeQuiet FM 550 PSU; Lian Li PC-9F; Win11Pro-64, F@H 8.3.5.
[Suspended] Ryzen 7 3700X, MSI X570MPG, 32GB G-Skill Trident Z DDR4-3600; Corsair MP600 M.2 PCIe Gen4 Boot, Samsung 840EVO-250 SSDs; VelociRaptor 1TB, Raptor 150; MSI GTX 1050ti, 526.98 driver; Kingwin Stryker 500 PSU; Lian Li PC-K7B. Win10Pro-64, F@H 8.3.5. - Location: @Home
- Contact:
Re: SMP or GPU2?
Both.
Ryzen 7 5700G, 22.40.46 VGA driver; MSI GTX 1050ti, 551.23 studio driver
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
-
Zagen30
- Posts: 823
- Joined: Tue Mar 25, 2008 12:45 am
- Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU
4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit
Re: SMP or GPU2?
Neither.
J/k. Both. GPU2 on an Nvidia card barely uses the CPU. An 8400 GS won't get great PPD, but every piece of hardware helps the project.
J/k. Both. GPU2 on an Nvidia card barely uses the CPU. An 8400 GS won't get great PPD, but every piece of hardware helps the project.
-
impossiblerubix
- Posts: 3
- Joined: Wed Jul 01, 2009 7:25 am
Re: SMP or GPU2?
Alright, since everyone says both. I will use both. =D Console versions!
-
toTOW
- Site Moderator
- Posts: 6334
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: SMP or GPU2?
Be careful, you'll probably have to fold 24/7 to be able to make the deadlines ...
If you can't (or don't want to), stick to two uniprocessor clients.
If you can't (or don't want to), stick to two uniprocessor clients.
Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Re: SMP or GPU2?
v00d00 wrote:SMP.
jrweiss wrote:Both.
Zagen30 wrote:Neither.
toTOW wrote:Be careful, you'll probably have to fold 24/7 to be able to make the deadlines ...
If you can't (or don't want to), stick to two uniprocessor clients.
Ok, so the real answer is: It depends . . . .
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
314159
- Posts: 232
- Joined: Sun Dec 02, 2007 2:46 am
- Location: http://www.teammacosx.org/
Re: SMP or GPU2?
A sense of humor from a Site Admin? 
I have never experienced that other than in private correspondences with the above.
IMHO, there should be some sort of (at least general) guidelines in a thread in this (now huge and barely manageable) forum that contains some sort of "optimization" information (and is updated as needed).
I guess that it simply depends........
I have never experienced that other than in private correspondences with the above.
IMHO, there should be some sort of (at least general) guidelines in a thread in this (now huge and barely manageable) forum that contains some sort of "optimization" information (and is updated as needed).
I guess that it simply depends........
John (from the central part of the Commonwealth of Virginia, U.S.A.)
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
A friendly visitor to what hopefully will remain a friendly Forum.
With thanks to all of the dedicated volunteers on the staff here!!
-
v00d00
- Posts: 390
- Joined: Sun Dec 02, 2007 4:53 am
- Hardware configuration: FX8320e (6 cores enabled) @ stock,
- 16GB DDR3,
- Zotac GTX 1050Ti @ Stock.
- Gigabyte GTX 970 @ Stock
Debian 9.
Running GPU since it came out, CPU since client version 3.
Folding since Folding began (~2000) and ran Genome@Home for a while too.
Ran Seti@Home prior to that. - Location: UK
- Contact:
Re: SMP or GPU2?
With SMP he should make the deadlines on a dual core at 2.7, but yes would have to fold near enough 24/7 to do it.
A GF 8400 probably isnt worth running, but if you can afford to run it then do so, i personally wouldnt.
A GF 8400 probably isnt worth running, but if you can afford to run it then do so, i personally wouldnt.
-
ashdaw84
- Posts: 10
- Joined: Sat Sep 20, 2008 7:37 am
- Hardware configuration: E8400 Core Duo
EP45 DS3R M/B
PC8500 x 4GB ram,
9600GT NVidia
3x500gb sata,
750w PSU
Samsung 22" Monitor - Location: Canberra Australia
- Contact:
Re: SMP or GPU2?
I will add to this question here. I have an E8400 with 4GB ram and a 9600GT Nvidia. I am currently using the GPU systray client and have been wondering lately if I could run more than one client (like GPU and SMP)
The computer doesn't get used for gaming or anything like it and is mostly left on 24/7.
I have Server 2008 64bit and also a Win 7 install plus Ubuntu. So, would it be useful for ME to run the SMP AND the Gpu client?
The computer doesn't get used for gaming or anything like it and is mostly left on 24/7.
I have Server 2008 64bit and also a Win 7 install plus Ubuntu. So, would it be useful for ME to run the SMP AND the Gpu client?
Still new at this
-
jrweiss
- Posts: 704
- Joined: Tue Dec 04, 2007 6:56 am
- Hardware configuration: Ryzen 7 5700G, 22.40.46 VGA driver; 32GB G-Skill Trident DDR4-3200; Samsung 860EVO 1TB Boot SSD; VelociRaptor 1TB; MSI GTX 1050ti, 551.23 studio driver; BeQuiet FM 550 PSU; Lian Li PC-9F; Win11Pro-64, F@H 8.3.5.
[Suspended] Ryzen 7 3700X, MSI X570MPG, 32GB G-Skill Trident Z DDR4-3600; Corsair MP600 M.2 PCIe Gen4 Boot, Samsung 840EVO-250 SSDs; VelociRaptor 1TB, Raptor 150; MSI GTX 1050ti, 526.98 driver; Kingwin Stryker 500 PSU; Lian Li PC-K7B. Win10Pro-64, F@H 8.3.5. - Location: @Home
- Contact:
Re: SMP or GPU2?
Yes. The Linux SMP client will run faster (it uses a different core than the Win SMP client), so you can try that route.
Ryzen 7 5700G, 22.40.46 VGA driver; MSI GTX 1050ti, 551.23 studio driver
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
-
extrasalty
- Posts: 26
- Joined: Sat Jun 21, 2008 8:39 pm
- Location: Las Vegas, NV
Re: SMP or GPU2?
Get the virtual appliance @ http://reilly.homeip.net/folding/ and run it under VMware Player. Make sure you put your name and team.
MSI Eclipse i7@3.45GHz
2x GTX260@702/1053/1512 Win 7+VMware+linuxfah VM+bigadv
2x GTX260@702/1053/1512 Win 7+VMware+linuxfah VM+bigadv