System crash on almost all 3065 WUs

Moderators: Site Moderators, FAHC Science Team

Post Reply
Kibbo
Posts: 5
Joined: Sat Jan 31, 2009 1:59 am
Hardware configuration: Intel Core i7 920 @ 3.8GHz | 2x MSI 560 Ti FROZR II OC | OCZ Platinum XTC DDR3 PC12800 12GB 7-7-7-24 | DFI LanParty UT X58-T3eH8 | Seasonic M12D 850W | Windows 7 Ultimate 64-bit
Location: Sweden

System crash on almost all 3065 WUs

Post by Kibbo »

I've had this problem for a while now, almost every single WU from project 3065 will cause a complete system crash. Sometimes it takes just 5 minutes, and sometimes it can go on for several hours before my system goes blargh. First I thought it didn't like my overclocking, running a core i7 920 at 3.8GHz. So in order to check for instability I ran both Prime95 with 8 worker threads and stresscpu2 for several hours each, both did fine. I tried running with my CPU at default clocks, HT on and off but the problem is still there.

Unfortunately I don't have any error messages to show since it's a complete system lockup and no error reporting can be written to disk.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: System crash on almost all 3065 WUs

Post by 7im »

System temps while running StressCPU v2? Have you also tried running a memory tester like MS Memory Tester, or Memtest86?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Kibbo
Posts: 5
Joined: Sat Jan 31, 2009 1:59 am
Hardware configuration: Intel Core i7 920 @ 3.8GHz | 2x MSI 560 Ti FROZR II OC | OCZ Platinum XTC DDR3 PC12800 12GB 7-7-7-24 | DFI LanParty UT X58-T3eH8 | Seasonic M12D 850W | Windows 7 Ultimate 64-bit
Location: Sweden

Re: System crash on almost all 3065 WUs

Post by Kibbo »

Memtest86 runs just fine, and the CPU temperature settles at 52-54 degrees C when running stresscpu2.
Post Reply