Upload Problem - how to disable autosend

[1TM]

Upload going to 100%, server responds PLEASE_WAIT (464) again and again.
Client is not switching to collection server (backup to receive the upload).
Possibly server might be full and noone to insert a new floppy disk or bring a new cloud.

Uploading 12.5MB over every 2 minutes over and over consumes my (metered) connection.
Exhausting the connection will soon stop all other work units.

How to disable the autosend for this failed server?

Have rebooted the PC. Client 7.5.1 still not switching to collection server.

Code: Select all

05:08:08:WU02:FS02:Sending unit results: id:02 state:SEND error:NO_ERROR project:11749 run:0 clone:3058 gen:11 core:0x22 
05:08:08:WU02:FS02:Uploading 12.56MiB to 140.163.4.231
05:08:08:WU02:FS02:Connecting to 140.163.4.231:8080
05:08:29:WARNING:WU02:FS02:WorkServer connection failed on port 8080 trying 80
05:08:29:WU02:FS02:Connecting to 140.163.4.231:80
05:08:30:WU02:FS02:Upload 0.50%
05:10:44:WU02:FS02:Upload 94.51%
05:10:48:WU02:FS02:Upload complete
05:10:48:WU02:FS02:Server responded PLEASE_WAIT (464)
05:10:48:WARNING:WU02:FS02:Failed to send results, will try again later
05:10:49:WU02:FS02:Sending unit results: id:02 state:SEND error:NO_ERROR project:11749 run:0 clone:3058 gen:11 core:0x22 
05:10:49:WU02:FS02:Uploading 12.56MiB to 140.163.4.231
05:10:49:WU02:FS02:Connecting to 140.163.4.231:8080
05:11:37:WU02:FS02:Upload 1.49%
05:13:23:WU02:FS02:Upload 94.51%
05:13:28:WU02:FS02:Upload complete
05:13:28:WU02:FS02:Server responded PLEASE_WAIT (464)
05:13:28:WARNING:WU02:FS02:Failed to send results, will try again later
05:13:28:WU02:FS02:Sending unit results: id:02 state:SEND error:NO_ERROR project:11749 run:0 clone:3058 gen:11 core:0x22 
05:13:28:WU02:FS02:Uploading 12.56MiB to 140.163.4.231
05:13:28:WU02:FS02:Connecting to 140.163.4.231:8080
05:14:21:WU02:FS02:Upload 1.49%
05:15:34:WU02:FS02:Upload 94.01%
05:15:39:WU02:FS02:Upload complete
05:15:39:WU02:FS02:Server responded PLEASE_WAIT (464)
05:15:39:WARNING:WU02:FS02:Failed to send results, will try again later
05:15:40:WU02:FS02:Sending unit results: id:02 state:SEND error:NO_ERROR project:11749 run:0 clone:3058 gen:11 core:0x22 
05:15:40:WU02:FS02:Uploading 12.56MiB to 140.163.4.231
05:15:40:WU02:FS02:Connecting to 140.163.4.231:8080
05:16:28:WU02:FS02:Upload 1.49%
05:17:34:WU02:FS02:Upload 99.98%
05:17:34:WU02:FS02:Upload complete
05:17:34:WU02:FS02:Server responded PLEASE_WAIT (464)
05:17:34:WARNING:WU02:FS02:Failed to send results, will try again later
05:18:17:WU02:FS02:Sending unit results: id:02 state:SEND error:NO_ERROR project:11749 run:0 clone:3058 gen:11 core:0x22 
05:18:17:WU02:FS02:Uploading 12.56MiB to 140.163.4.231
05:18:17:WU02:FS02:Connecting to 140.163.4.231:8080

[Joe_H]

The only way to shutdown the auto send is to stop the folding client for now. I will notify the person managing the server, but have no idea if he is up at this time. If the server was completely offline, then the WU send should divert to the CS.

[1TM]

Thank you.
An update: after multiple attempts the autosend timeout went from 0 to 15 minutes then to 30 minutes.
By that time another work unit got finished in the same folding slot, uploaded that work unit to another work server and received WORK_ACK (400).
This seems to have stopped the autosend for the original completed work unit which kept getting "Upload complete" and PLEASE_WAIT (464).
At least the completed work unit which kept getting (464) disappeared from the work queue.

[VMos]

Got the same error message (464) on the same collection server (140.163.4.231:8080) on multiple upload trials, I think 14 by now.

16:53:54:WU01:FS01:Upload 100.00%
16:53:54:WU01:FS01:Upload complete
16:53:54:WU01:FS01:Server responded PLEASE_WAIT (464)
16:53:54:WARNING:WU01:FS01:Failed to send results, will try again later
16:53:55:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:11747 run:0 clone:9584 gen:3 core:0x22 unit:0x0000000f8ca304e75e6baf0964ed1280
16:53:55:WU01:FS01:Uploading 21.92MiB to 140.163.4.231
16:53:55:WU01:FS01:Connecting to 140.163.4.231:8080
16:54:48:WU01:FS01:Upload 0.86%

Any idea what the problem is? - Several other WU went through results upload smoothly, assumedly via a different server.

[Joe_H]

Server acceptance code could have been temporarily offline, software update or other item that placed it in that status. Some of the statuses should only show for a brief time, it shouldn't have stayed that way for long periods like in the OP or this for 14 times.

Some of the servers are also getting low on storage, they can move some of the completed work to other storage, but that also might have holdups in the high network traffic being seen.