Electrical power standards for homes

A forum for discussing FAH-related hardware choices and info on actual products (not speculation).

Moderator: Site Moderators

Forum rules
Please read the forum rules before posting.
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Electrical power standards for homes

Post by Joe_H »

More easily powered on a European residential circuit using 220 V. In the US a 15 A, 220 V connection and have two power supplies on opposite legs of the circuit. Some homes would have that available, it was a fairly common circuit for a larger window air conditioner.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Roland140
Posts: 23
Joined: Tue Sep 12, 2017 4:32 pm

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by Roland140 »

If you're springing for that board, a case for it, 16 GPU cards, the cost of having a 110V/30A outlet installed is small change. Alternately, converting an existing 220V outlet into two 110V outlets would probably be even smaller change.
Sven
Posts: 71
Joined: Fri Nov 01, 2013 8:12 pm

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by Sven »

Jep, in Europe, that's less a problem. The standard circuit has 230V, most Plugs (Schuko) are specified with 16A. Here in Switzerland, the plug is specified with 10A. And most homes have a 400V (3 times 230V phases with 16A) plug, mostly for the dishwasher or washing machine / tumbler.
Nathan_P
Posts: 1164
Joined: Wed Apr 01, 2009 9:22 pm
Hardware configuration: Asus Z8NA D6C, 2 x5670@3.2 Ghz, , 12gb Ram, GTX 980ti, AX650 PSU, win 10 (daily use)

Asus Z87 WS, Xeon E3-1230L v3, 8gb ram, KFA GTX 1080, EVGA 750ti , AX760 PSU, Mint 18.2 OS

Not currently folding
Asus Z9PE- D8 WS, 2 E5-2665@2.3 Ghz, 16Gb 1.35v Ram, Ubuntu (Fold only)
Asus Z9PA, 2 Ivy 12 core, 16gb Ram, H folding appliance (fold only)
Location: Jersey, Channel islands

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by Nathan_P »

Sven wrote:Jep, in Europe, that's less a problem. The standard circuit has 230V, most Plugs (Schuko) are specified with 16A. Here in Switzerland, the plug is specified with 10A. And most homes have a 400V (3 times 230V phases with 16A) plug, mostly for the dishwasher or washing machine / tumbler.
13amp 240volt here in the UK, that will even power a tumble drier/dishawasher
Image
Sven
Posts: 71
Joined: Fri Nov 01, 2013 8:12 pm

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by Sven »

In the 80ies all dishwasher / tumbler / washing machine had rotary current with 400V. All of those machines had them in our house and so we still have those sockets. That changed in the last 10 years to 10A 230V.
Roland140
Posts: 23
Joined: Tue Sep 12, 2017 4:32 pm

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by Roland140 »

Here in the US, the standard dryer circuit is 220V/30A. Split, that would yield two 110V/30A circuits...power is power and watts is watts.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by bruce »

We don't put 3-phase outlets in homes here in the USA. That's just for industrial equipment.

It's either 120v(2 wire + G) or 240v (3-wire + G) single phase.
v00d00
Posts: 390
Joined: Sun Dec 02, 2007 4:53 am
Hardware configuration: FX8320e (6 cores enabled) @ stock,
- 16GB DDR3,
- Zotac GTX 1050Ti @ Stock.
- Gigabyte GTX 970 @ Stock
Debian 9.

Running GPU since it came out, CPU since client version 3.
Folding since Folding began (~2000) and ran Genome@Home for a while too.
Ran Seti@Home prior to that.
Location: UK
Contact:

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by v00d00 »

Same in the UK.

Getting 3 phase installed is a pain. It's only really used for industrial purposes.

When you consider having 3 phase installed in your home so you can run folding, you have more problems than power. :/
Image
ChristianVirtual
Posts: 1576
Joined: Tue May 28, 2013 12:14 pm
Location: Tokyo

Electrical power standards for homes

Post by ChristianVirtual »

here in Japan is 110V-power lines are weak ... at least in the house I'm in ... I wish I could load more without burning down the house. Sometimes I wish myself back to the good ol' german 220V
ImageImage
Please contribute your logs to http://ppd.fahmm.net
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by bruce »

i thought Japan had a 100v standard rather than being "weak"
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by Joe_H »

From my understanding Japan has two standards depending on location. Both are 100 V, but eastern regions have 50 Hz supplies and western regions are 60 Hz. 200 V circuits are generally available to handle higher wattage equipment.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
jrweiss
Posts: 704
Joined: Tue Dec 04, 2007 6:56 am
Hardware configuration: Ryzen 7 5700G, 22.40.46 VGA driver; 32GB G-Skill Trident DDR4-3200; Samsung 860EVO 1TB Boot SSD; VelociRaptor 1TB; MSI GTX 1050ti, 551.23 studio driver; BeQuiet FM 550 PSU; Lian Li PC-9F; Win11Pro-64, F@H 8.3.5.

[Suspended] Ryzen 7 3700X, MSI X570MPG, 32GB G-Skill Trident Z DDR4-3600; Corsair MP600 M.2 PCIe Gen4 Boot, Samsung 840EVO-250 SSDs; VelociRaptor 1TB, Raptor 150; MSI GTX 1050ti, 526.98 driver; Kingwin Stryker 500 PSU; Lian Li PC-K7B. Win10Pro-64, F@H 8.3.5.
Location: @Home
Contact:

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by jrweiss »

Also, many older Japanese houses had only 10-30 amps at 100V for the entire house!
Ryzen 7 5700G, 22.40.46 VGA driver; MSI GTX 1050ti, 551.23 studio driver
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
ChristianVirtual
Posts: 1576
Joined: Tue May 28, 2013 12:14 pm
Location: Tokyo

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by ChristianVirtual »

Once I opened a plug in the wall and watched direct on wood ... no casing for the plug. And often enough I see little sparks when connect/disconnect. Sparks, wood, ... I wish more German TÜV would be around ...
ImageImage
Please contribute your logs to http://ppd.fahmm.net
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Non-standard Motherboard with Eight PCIe x16 Slots

Post by toTOW »

In my house (which is not big and use 30 year-old norms), I have main 500mA differential circuit breaker calibrated for 30A (which is what I pay for), then I have two 10A circuits for the lights, three 16A circuits for the electric plugs, one 20A circuit for a very old plug that was used for old washing machine and one 32A circuit for the kitchen (oven, dishwasher and now unused hotplate).

Here in France, we use 230V/50Hz and I use city gaz (and computers lol) to heat the house.

In a more modern house, you'll find one or more 30mA differential circuit breaker (40A) between the main one and the fuses for the circuits. And the fuses would be replaced by circuit breakers.
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Roland140
Posts: 23
Joined: Tue Sep 12, 2017 4:32 pm

Re: Electrical power standards for homes

Post by Roland140 »

We have a small house here in the US. 200amp/220V main breaker, 30amp/220V for the dryer, 20amp/220V for the well pump, 30A/220V to supply power to the outbuildings, 20amp/220V for the air conditioner and the other 32 slots in the panel are a mix of 15amp/110V and 20amp/120V to feed the outlets (20 amp circuits in the kitchen and basement and 15 amp for the rest of the rooms). Each room is fed by two circuits so it's kind of hard to overload anything. The kitchen, bathrooms, basement and exterior outlets are GFI, ground fault interrupter for additional safety.
Post Reply