171.67.108.42 Not Listed

Moderators: Site Moderators, FAHC Science Team

Post Reply
DrBB1
Posts: 136
Joined: Wed Mar 26, 2008 12:30 am
Location: SE PA

171.67.108.42 Not Listed

Post by DrBB1 »

I can't seem to upload a completed WU. The primary server it is uploading to (171.67.108.42) is not in the server list at all. The secondary collection server (171.67.108.26) is identified as "not accepting" WUs. In the listing below, the first segment of the log (beginning at 19:50) is from the initial attempts to upload immediately after completion. The second segment (beginning at 20:10) picks up after I quit and restarted the new WU several times to see if the problem was on my end. [My firewall sometimes blocks uploads, so I turned it off and tried again, which often fixes the problem, but no success this time.]

Please let me know if this is a server issue. Also, is it unusual for a WS not to appear at all in the "Server Status" list? Thanks for your help.

Code: Select all

[19:50:06] Completed 7000000 out of 7000000 steps  (100%)
[19:50:06] DynamicWrapper: Finished Work Unit: sleep=10000
[19:50:16] 
[19:50:16] Finished Work Unit:
[19:50:16] - Reading up to 1818648 from "work/wudata_09.trr": Read 1818648
[19:50:16] trr file hash check passed.
[19:50:16] - Reading up to 168608 from "work/wudata_09.xtc": Read 168608
[19:50:16] xtc file hash check passed.
[19:50:16] edr file hash check passed.
[19:50:16] logfile size: 37747
[19:50:16] Leaving Run
[19:50:20] - Writing 2034615 bytes of core data to disk...
[19:50:21] Done: 2034103 -> 1893752 (compressed to 93.1 percent)
[19:50:21]   ... Done.
[19:50:23] - Shutting down core
[19:50:23] 
[19:50:23] Folding@home Core Shutdown: FINISHED_UNIT
[19:50:26] CoreStatus = 64 (100)
[19:50:26] Unit 9 finished with 80 percent of time to deadline remaining.
[19:50:26] Updated performance fraction: 0.840637
[19:50:26] Sending work to server
[19:50:26] Project: 10721 (Run 0, Clone 10498, Gen 4)


[19:50:26] + Attempting to send results [November 27 19:50:26 UTC]
[19:50:26] - Reading file work/wuresults_09.dat from core
[19:50:26]   (Read 1894264 bytes from disk)
[19:50:26] Connecting to http://171.67.108.42:8080/
[19:50:27] - Couldn't send HTTP request to server
[19:50:27] + Could not connect to Work Server (results)
[19:50:27]     (171.67.108.42:8080)
[19:50:27] + Retrying using alternative port
[19:50:27] Connecting to http://171.67.108.42:80/
[19:50:29] - Couldn't send HTTP request to server
[19:50:29] + Could not connect to Work Server (results)
[19:50:29]     (171.67.108.42:80)
[19:50:29] - Error: Could not transmit unit 09 (completed November 27) to work server.
[19:50:29] - 1 failed uploads of this unit.
[19:50:29]   Keeping unit 09 in queue.
[19:50:29] Trying to send all finished work units
[19:50:29] Project: 10721 (Run 0, Clone 10498, Gen 4)


[19:50:29] + Attempting to send results [November 27 19:50:29 UTC]
[19:50:29] - Reading file work/wuresults_09.dat from core
[19:50:29]   (Read 1894264 bytes from disk)
[19:50:29] Connecting to http://171.67.108.42:8080/
[19:50:30] - Couldn't send HTTP request to server
[19:50:30] + Could not connect to Work Server (results)
[19:50:30]     (171.67.108.42:8080)
[19:50:30] + Retrying using alternative port
[19:50:30] Connecting to http://171.67.108.42:80/
[19:50:32] - Couldn't send HTTP request to server
[19:50:32] + Could not connect to Work Server (results)
[19:50:32]     (171.67.108.42:80)
[19:50:32] - Error: Could not transmit unit 09 (completed November 27) to work server.
[19:50:32] - 2 failed uploads of this unit.


[19:50:32] + Attempting to send results [November 27 19:50:32 UTC]
[19:50:32] - Reading file work/wuresults_09.dat from core
[19:50:32]   (Read 1894264 bytes from disk)
[19:50:32] Connecting to http://171.67.108.26:8080/
[19:50:33] - Couldn't send HTTP request to server
[19:50:33] + Could not connect to Work Server (results)
[19:50:33]     (171.67.108.26:8080)
[19:50:33] + Retrying using alternative port
[19:50:33] Connecting to http://171.67.108.26:80/
[19:50:35] - Couldn't send HTTP request to server
[19:50:35] + Could not connect to Work Server (results)
[19:50:35]     (171.67.108.26:80)
[19:50:35]   Could not transmit unit 09 to Collection server; keeping in queue.
[19:50:35] + Sent 0 of 1 completed units to the server
[19:50:35] - Preparing to get new work unit...
[19:50:35] + Attempting to get work packet
[19:50:35] - Will indicate memory of 3999 MB
[19:50:35] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 7, Stepping: 6
[19:50:35] - Connecting to assignment server
[19:50:35] Connecting to http://assign.stanford.edu:8080/
[19:50:36] Posted data.
[19:50:36] Initial: 4A81; - Successful: assigned to (129.74.85.15).
[19:50:36] + News From Folding@Home: Welcome to Folding@Home
[19:50:36] Loaded queue successfully.
[19:50:36] Connecting to http://129.74.85.15:8080/
[19:50:36] Posted data.
[19:50:36] Initial: 0000; - Receiving payload (expected size: 51666)
[19:50:37] - Downloaded at ~50 kB/s
[19:50:37] - Averaged speed for that direction ~196 kB/s
[19:50:37] + Received work.
[19:50:37] Trying to send all finished work units
[19:50:37] Project: 10721 (Run 0, Clone 10498, Gen 4)


[19:50:37] + Attempting to send results [November 27 19:50:37 UTC]
[19:50:37] - Reading file work/wuresults_09.dat from core
[19:50:37]   (Read 1894264 bytes from disk)
[19:50:37] Connecting to http://171.67.108.42:8080/
[19:50:38] - Couldn't send HTTP request to server
[19:50:38] + Could not connect to Work Server (results)
[19:50:38]     (171.67.108.42:8080)
[19:50:38] + Retrying using alternative port
[19:50:38] Connecting to http://171.67.108.42:80/
[19:50:40] - Couldn't send HTTP request to server
[19:50:40] + Could not connect to Work Server (results)
[19:50:40]     (171.67.108.42:80)
[19:50:40] - Error: Could not transmit unit 09 (completed November 27) to work server.
[19:50:40] - 3 failed uploads of this unit.


[19:50:40] + Attempting to send results [November 27 19:50:40 UTC]
[19:50:40] - Reading file work/wuresults_09.dat from core
[19:50:40]   (Read 1894264 bytes from disk)
[19:50:40] Connecting to http://171.67.108.26:8080/
[19:50:41] - Couldn't send HTTP request to server
[19:50:41] + Could not connect to Work Server (results)
[19:50:41]     (171.67.108.26:8080)
[19:50:41] + Retrying using alternative port
[19:50:41] Connecting to http://171.67.108.26:80/
[19:50:43] - Couldn't send HTTP request to server
[19:50:43] + Could not connect to Work Server (results)
[19:50:43]     (171.67.108.26:80)
[19:50:43]   Could not transmit unit 09 to Collection server; keeping in queue.
[19:50:43] + Sent 0 of 1 completed units to the server
[19:50:43] + Closed connections
.
.
.
[20:10:57] - Autosending finished units... [November 27 20:10:57 UTC]
[20:10:57] Trying to send all finished work units
[20:10:57] Project: 10721 (Run 0, Clone 10498, Gen 4)


[20:10:57] + Attempting to send results [November 27 20:10:57 UTC]
[20:10:57] - Reading file work/wuresults_09.dat from core
[20:10:57]   (Read 1894264 bytes from disk)
[20:10:57] Connecting to http://171.67.108.42:8080/
[20:10:57] Working on queue slot 00 [November 27 20:10:57 UTC]
[20:10:57] + Working ...
[20:10:57] - Calling '.\FahCore_a4.exe -dir work/ -suffix 00 -priority 96 -nocpulock -checkpoint 30 -verbose -lifeline 4172 -version 623'

[20:10:57] 
[20:10:57] *------------------------------*
[20:10:57] Folding@Home Gromacs GB Core
[20:10:57] Version 2.27 (Dec. 15, 2010)
[20:10:57] 
[20:10:57] Preparing to commence simulation
[20:10:57] - Looking at optimizations...
[20:10:57] - Files status OK
[20:10:57] - Expanded 51154 -> 201448 (decompressed 393.8 percent)
[20:10:57] Called DecompressByteArray: compressed_data_size=51154 data_size=201448, decompressed_data_size=201448 diff=0
[20:10:57] - Digital signature verified
[20:10:57] 
[20:10:57] Project: 10085 (Run 2, Clone 607, Gen 0)
[20:10:57] 
[20:10:57] Assembly optimizations on if available.
[20:10:57] Entering M.D.
[20:11:00] - Couldn't send HTTP request to server
[20:11:00] + Could not connect to Work Server (results)
[20:11:00]     (171.67.108.42:8080)
[20:11:00] + Retrying using alternative port
[20:11:00] Connecting to http://171.67.108.42:80/
[20:11:02] - Couldn't send HTTP request to server
[20:11:02] + Could not connect to Work Server (results)
[20:11:02]     (171.67.108.42:80)
[20:11:02] - Error: Could not transmit unit 09 (completed November 27) to work server.
[20:11:02] - 4 failed uploads of this unit.


[20:11:02] + Attempting to send results [November 27 20:11:02 UTC]
[20:11:02] - Reading file work/wuresults_09.dat from core
[20:11:02]   (Read 1894264 bytes from disk)
[20:11:02] Connecting to http://171.67.108.26:8080/
[20:11:03] Mapping NT from 1 to 1 
[20:11:03] Completed 0 out of 10000000 steps  (0%)
[20:11:05] - Couldn't send HTTP request to server
[20:11:05] + Could not connect to Work Server (results)
[20:11:05]     (171.67.108.26:8080)
[20:11:05] + Retrying using alternative port
[20:11:05] Connecting to http://171.67.108.26:80/
[20:11:08] - Couldn't send HTTP request to server
[20:11:08] + Could not connect to Work Server (results)
[20:11:08]     (171.67.108.26:80)
[20:11:08]   Could not transmit unit 09 to Collection server; keeping in queue.
[20:11:08] + Sent 0 of 1 completed units to the server
[20:11:08] - Autosend completed
[20:12:38] ***** Got a SIGTERM signal (2)
[20:12:38] Killing all core threads

Folding@Home Client Shutdown.

[19:50:43] 
========
DrBB1
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.67.108.42 Not Listed

Post by bruce »

It's a server problem. There's nothing you can do except to be patient.

I'm attempting to contact somebody who can do something about it but it's Sunday on a holiday weekend for many folks.
DrBB1
Posts: 136
Joined: Wed Mar 26, 2008 12:30 am
Location: SE PA

Re: 171.67.108.26 Not Accepting; 171.67.108.42 Not Listed

Post by DrBB1 »

Thanks bruce. Patience is a worthy virtue. I shall try to practice it. Image
========
DrBB1
dvanatta
Pande Group Member
Posts: 62
Joined: Tue Sep 14, 2010 7:00 pm

Re: 171.67.108.26 Not Accepting; 171.67.108.42 Not Listed

Post by dvanatta »

Hi,

I just took care of this, the server should begin accepting uploads immediately and will appear on server stat page the next time it refreshes.

Thanks,
Dan
DrBB1
Posts: 136
Joined: Wed Mar 26, 2008 12:30 am
Location: SE PA

Re: 171.67.108.26 Not Accepting; 171.67.108.42 Not Listed

Post by DrBB1 »

Dan-- Thanks. WU has been accepted.
========
DrBB1
pwnorbpwnd
Posts: 5
Joined: Tue Nov 29, 2011 5:45 pm

Re: 171.67.108.26 Not Accepting; 171.67.108.42 Not Listed

Post by pwnorbpwnd »

Hello, I'm having some trouble with 171.67.108.26 also.. It isn't accepting my WU's, tried all I could to get my end to work but to no avail. Thanks
codysluder
Posts: 1024
Joined: Sun Dec 02, 2007 12:43 pm

Re: 171.67.108.26 Not Accepting; 171.67.108.42 Not Listed

Post by codysluder »

pwnorbpwnd wrote:Hello, I'm having some trouble with 171.67.108.26 also.. It isn't accepting my WU's, tried all I could to get my end to work but to no avail. Thanks
This report is going to be ignored. It has been repeatedly said that any troubles you have with 171.67.108.26 or other collection severs should be IGNORED. There's no point in reporting it. You need to focus on whatever other server your client is trying to use, whether it's 171.67.108.42, as it is in this topic, or some other server in another topic.

The top-most topic in this forum is called Troubleshooting Server Connectivity Issues (Do This First) for a reason, but nobody bothers to read it. :(
dvanatta
Pande Group Member
Posts: 62
Joined: Tue Sep 14, 2010 7:00 pm

Re: 171.67.108.42 Not Listed

Post by dvanatta »

Hi,

As far as I can tell, 171.67.108.42 is working properly and will be listed on server stat on the next update. Let me know if there are still problems.

-Dan
pwnorbpwnd
Posts: 5
Joined: Tue Nov 29, 2011 5:45 pm

Re: 171.67.108.42 Not Listed

Post by pwnorbpwnd »

Part of the topic says ''171.67.108.42 Not Accepting;'' thats rude to tell it would be ignores, anyway I did all of the connectivity trouble shooting and its not working out.
pwnorbpwnd
Posts: 5
Joined: Tue Nov 29, 2011 5:45 pm

Re: 171.67.108.42 Not Listed

Post by pwnorbpwnd »

Well it doesn't anymore. Way to change it after I post
Post Reply