Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Moderators: Site Moderators, FAHC Science Team

Post Reply
Alpineb1
Posts: 9
Joined: Mon Jun 08, 2009 1:11 pm
Hardware configuration: • ► › I7 2600K @ 4.9Ghz|P67A-UD4-B3|12G G.Skill 1600Mhz|Noctua NH-D14|Solid 3 60GB|Asus GTX560 DCU II TOP|Corsair AX1200|Lancool PC-K62|Corsair SP2500
• ► › I7 2600K @ 4.5Ghz|P67A-UD4-B3|8GO G.Skill 1600Mhz|Noctua NH-D14|Evga GTX450|Corsair AX850|Lancool PC-K62
• ► › 2X AMD Opteron 6128 8 cores | 8G DDR3 Gskill Ripjaws | ASUS KGPE-D16 | Seasonic 560W | Noctua NH-U9D0
Location: Montréal

Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by Alpineb1 »

Today i have finish a 6904 projet and still no credit.
I have found a msg in the log that the wu was already received...I put that in bold

Code: Select all

[13:12:36] Initial: 0000; - Receiving payload (expected size: 57214336)
[13:14:16] - Downloaded at ~558 kB/s
[13:14:16] - Averaged speed for that direction ~134 kB/s
[13:14:16] + Received work.
[13:14:16] + Closed connections
[13:14:21] 
[13:14:21] + Processing work unit
[13:14:21] Core required: FahCore_a5.exe
[13:14:21] Core found.
[13:14:21] Working on queue slot 09 [November 18 13:14:21 UTC]
[13:14:21] + Working ...
[13:14:21] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 09 -np 16 -checkpoint 10 -verbose -lifeline 1969 -version 634'

[13:14:21] 
[13:14:21] *------------------------------*
[13:14:21] Folding@Home Gromacs SMP Core
[13:14:21] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[13:14:21] 
[13:14:21] Preparing to commence simulation
[13:14:21] - Looking at optimizations...
[13:14:21] - Created dyn
[13:14:21] - Files status OK
[13:14:28] - Expanded 57213824 -> 71843392 (decompressed 50.5 percent)
[13:14:28] Called DecompressByteArray: compressed_data_size=57213824 data_size=71843392, decompressed_data_size=71843392 diff=0
[13:14:28] - Digital signature verified
[13:14:28] 
[13:14:28] Project: 6904 (Run 2, Clone 4, Gen 40)
[13:14:28] 
[13:14:28] Assembly optimizations on if available.
[13:14:28] Entering M.D.
[13:14:37] Mapping NT from 16 to 16 
[13:14:44] Completed 0 out of 250000 steps  (0%)
[14:08:49] Completed 2500 out of 250000 steps  (1%)
[14:57:52] - Autosending finished units... [November 18 14:57:52 UTC]
[14:57:52] Trying to send all finished work units
[14:57:52] + No unsent completed units remaining.
[14:57:52] - Autosend completed
[15:02:53] Completed 5000 out of 250000 steps  (2%)
[15:56:59] Completed 7500 out of 250000 steps  (3%)
[16:50:59] Completed 10000 out of 250000 steps  (4%)
[17:45:06] Completed 12500 out of 250000 steps  (5%)
[18:39:05] Completed 15000 out of 250000 steps  (6%)
[19:33:06] Completed 17500 out of 250000 steps  (7%)
[20:27:10] Completed 20000 out of 250000 steps  (8%)
[20:57:52] - Autosending finished units... [November 18 20:57:52 UTC]
[20:57:52] Trying to send all finished work units
[20:57:52] + No unsent completed units remaining.
[20:57:52] - Autosend completed
[21:21:10] Completed 22500 out of 250000 steps  (9%)
[22:15:13] Completed 25000 out of 250000 steps  (10%)
[23:09:11] Completed 27500 out of 250000 steps  (11%)
[00:03:08] Completed 30000 out of 250000 steps  (12%)
[00:57:10] Completed 32500 out of 250000 steps  (13%)
[01:51:09] Completed 35000 out of 250000 steps  (14%)
[02:45:19] Completed 37500 out of 250000 steps  (15%)
[02:57:52] - Autosending finished units... [November 19 02:57:52 UTC]
[02:57:52] Trying to send all finished work units
[02:57:52] + No unsent completed units remaining.
[02:57:52] - Autosend completed
[03:39:10] Completed 40000 out of 250000 steps  (16%)
[04:33:02] Completed 42500 out of 250000 steps  (17%)
[05:26:58] Completed 45000 out of 250000 steps  (18%)
[06:20:50] Completed 47500 out of 250000 steps  (19%)
[07:14:39] Completed 50000 out of 250000 steps  (20%)
[08:08:36] Completed 52500 out of 250000 steps  (21%)
[08:57:52] - Autosending finished units... [November 19 08:57:52 UTC]
[08:57:52] Trying to send all finished work units
[08:57:52] + No unsent completed units remaining.
[08:57:52] - Autosend completed
[09:02:27] Completed 55000 out of 250000 steps  (22%)
[09:56:25] Completed 57500 out of 250000 steps  (23%)
[10:50:16] Completed 60000 out of 250000 steps  (24%)
[11:44:08] Completed 62500 out of 250000 steps  (25%)
[12:38:05] Completed 65000 out of 250000 steps  (26%)
[13:31:56] Completed 67500 out of 250000 steps  (27%)
[14:25:52] Completed 70000 out of 250000 steps  (28%)
[14:57:52] - Autosending finished units... [November 19 14:57:52 UTC]
[14:57:52] Trying to send all finished work units
[14:57:52] + No unsent completed units remaining.
[14:57:52] - Autosend completed
[15:19:42] Completed 72500 out of 250000 steps  (29%)
[16:13:33] Completed 75000 out of 250000 steps  (30%)
[17:07:30] Completed 77500 out of 250000 steps  (31%)
[18:01:19] Completed 80000 out of 250000 steps  (32%)
[18:55:13] Completed 82500 out of 250000 steps  (33%)
[19:48:59] Completed 85000 out of 250000 steps  (34%)
[20:42:50] Completed 87500 out of 250000 steps  (35%)
[20:57:52] - Autosending finished units... [November 19 20:57:52 UTC]
[20:57:52] Trying to send all finished work units
[20:57:52] + No unsent completed units remaining.
[20:57:52] - Autosend completed
[21:36:42] Completed 90000 out of 250000 steps  (36%)
[22:30:31] Completed 92500 out of 250000 steps  (37%)
[23:24:16] Completed 95000 out of 250000 steps  (38%)
[00:18:03] Completed 97500 out of 250000 steps  (39%)
[01:11:49] Completed 100000 out of 250000 steps  (40%)
[02:05:39] Completed 102500 out of 250000 steps  (41%)
[02:57:52] - Autosending finished units... [November 20 02:57:52 UTC]
[02:57:52] Trying to send all finished work units
[02:57:52] + No unsent completed units remaining.
[02:57:52] - Autosend completed
[02:59:23] Completed 105000 out of 250000 steps  (42%)
[03:53:08] Completed 107500 out of 250000 steps  (43%)
[04:46:59] Completed 110000 out of 250000 steps  (44%)
[05:40:42] Completed 112500 out of 250000 steps  (45%)
[06:34:30] Completed 115000 out of 250000 steps  (46%)
[07:28:23] Completed 117500 out of 250000 steps  (47%)
[08:22:08] Completed 120000 out of 250000 steps  (48%)
[08:57:52] - Autosending finished units... [November 20 08:57:52 UTC]
[08:57:52] Trying to send all finished work units
[08:57:52] + No unsent completed units remaining.
[08:57:52] - Autosend completed
[09:15:57] Completed 122500 out of 250000 steps  (49%)
[10:09:42] Completed 125000 out of 250000 steps  (50%)
[11:03:28] Completed 127500 out of 250000 steps  (51%)
[11:57:21] Completed 130000 out of 250000 steps  (52%)
[12:51:05] Completed 132500 out of 250000 steps  (53%)
[13:44:52] Completed 135000 out of 250000 steps  (54%)
[14:38:44] Completed 137500 out of 250000 steps  (55%)
[14:57:52] - Autosending finished units... [November 20 14:57:52 UTC]
[14:57:52] Trying to send all finished work units
[14:57:52] + No unsent completed units remaining.
[14:57:52] - Autosend completed
[15:32:26] Completed 140000 out of 250000 steps  (56%)
[16:26:11] Completed 142500 out of 250000 steps  (57%)
[17:19:53] Completed 145000 out of 250000 steps  (58%)
[18:13:33] Completed 147500 out of 250000 steps  (59%)
[19:07:18] Completed 150000 out of 250000 steps  (60%)
[20:00:58] Completed 152500 out of 250000 steps  (61%)
[20:54:38] Completed 155000 out of 250000 steps  (62%)
[20:57:52] - Autosending finished units... [November 20 20:57:52 UTC]
[20:57:52] Trying to send all finished work units
[20:57:52] + No unsent completed units remaining.
[20:57:52] - Autosend completed
[21:48:24] Completed 157500 out of 250000 steps  (63%)
[22:42:01] Completed 160000 out of 250000 steps  (64%)
[23:35:47] Completed 162500 out of 250000 steps  (65%)
[00:29:25] Completed 165000 out of 250000 steps  (66%)
[01:23:05] Completed 167500 out of 250000 steps  (67%)
[02:16:50] Completed 170000 out of 250000 steps  (68%)
[02:57:52] - Autosending finished units... [November 21 02:57:52 UTC]
[02:57:52] Trying to send all finished work units
[02:57:52] + No unsent completed units remaining.
[02:57:52] - Autosend completed
[03:10:29] Completed 172500 out of 250000 steps  (69%)
[04:04:10] Completed 175000 out of 250000 steps  (70%)
[04:59:04] Completed 177500 out of 250000 steps  (71%)
[05:52:47] Completed 180000 out of 250000 steps  (72%)
[06:46:31] Completed 182500 out of 250000 steps  (73%)
[07:40:12] Completed 185000 out of 250000 steps  (74%)
[08:33:50] Completed 187500 out of 250000 steps  (75%)
[08:57:52] - Autosending finished units... [November 21 08:57:52 UTC]
[08:57:52] Trying to send all finished work units
[08:57:52] + No unsent completed units remaining.
[08:57:52] - Autosend completed
[09:27:32] Completed 190000 out of 250000 steps  (76%)
[10:21:12] Completed 192500 out of 250000 steps  (77%)
[11:14:51] Completed 195000 out of 250000 steps  (78%)
[12:08:35] Completed 197500 out of 250000 steps  (79%)
[13:02:16] Completed 200000 out of 250000 steps  (80%)
[13:56:05] Completed 202500 out of 250000 steps  (81%)
[14:49:46] Completed 205000 out of 250000 steps  (82%)
[14:57:52] - Autosending finished units... [November 21 14:57:52 UTC]
[14:57:52] Trying to send all finished work units
[14:57:52] + No unsent completed units remaining.
[14:57:52] - Autosend completed
[15:43:27] Completed 207500 out of 250000 steps  (83%)
[16:37:12] Completed 210000 out of 250000 steps  (84%)
[17:30:52] Completed 212500 out of 250000 steps  (85%)
[18:24:29] Completed 215000 out of 250000 steps  (86%)
[19:18:15] Completed 217500 out of 250000 steps  (87%)
[20:11:53] Completed 220000 out of 250000 steps  (88%)
[20:57:52] - Autosending finished units... [November 21 20:57:52 UTC]
[20:57:52] Trying to send all finished work units
[20:57:52] + No unsent completed units remaining.
[20:57:52] - Autosend completed
[21:05:36] Completed 222500 out of 250000 steps  (89%)
[21:59:14] Completed 225000 out of 250000 steps  (90%)
[22:52:55] Completed 227500 out of 250000 steps  (91%)
[23:46:41] Completed 230000 out of 250000 steps  (92%)
[00:40:21] Completed 232500 out of 250000 steps  (93%)
[01:34:02] Completed 235000 out of 250000 steps  (94%)
[02:27:47] Completed 237500 out of 250000 steps  (95%)
[02:57:52] - Autosending finished units... [November 22 02:57:52 UTC]
[02:57:52] Trying to send all finished work units
[02:57:52] + No unsent completed units remaining.
[02:57:52] - Autosend completed
[03:21:28] Completed 240000 out of 250000 steps  (96%)
[04:15:18] Completed 242500 out of 250000 steps  (97%)
[05:08:57] Completed 245000 out of 250000 steps  (98%)
[06:02:36] Completed 247500 out of 250000 steps  (99%)
[06:56:25] Completed 250000 out of 250000 steps  (100%)
[06:56:48] DynamicWrapper: Finished Work Unit: sleep=10000
[06:56:58] 
[06:56:58] Finished Work Unit:
[06:56:58] - Reading up to 121544064 from "work/wudata_09.trr": Read 121544064
[06:56:59] trr file hash check passed.
[06:56:59] - Reading up to 108754784 from "work/wudata_09.xtc": Read 108754784
[06:57:00] xtc file hash check passed.
[06:57:00] edr file hash check passed.
[06:57:00] logfile size: 230876
[06:57:00] Leaving Run
[06:57:02] - Writing 230702716 bytes of core data to disk...
[06:58:12] Done: 230702204 -> 222352418 (compressed to 3.2 percent)
[06:58:12]   ... Done.
[07:00:15] - Shutting down core
[07:00:15] 
[07:00:15] Folding@home Core Shutdown: FINISHED_UNIT
[07:00:28] CoreStatus = 64 (100)
[07:00:28] Unit 9 finished with 78 percent of time to deadline remaining.
[07:00:28] Updated performance fraction: 0.743509
[07:00:28] Sending work to server
[07:00:28] Project: 6904 (Run 2, Clone 4, Gen 40)


[07:00:28] + Attempting to send results [November 22 07:00:28 UTC]
[07:00:28] - Reading file work/wuresults_09.dat from core
[07:00:28]   (Read 222352930 bytes from disk)
[07:00:28] Connecting to http://130.237.232.237:8080/
[07:00:28] - Couldn't send HTTP request to server
[07:00:28] + Could not connect to Work Server (results)
[07:00:28]     (130.237.232.237:8080)
[07:00:28] + Retrying using alternative port
[07:00:28] Connecting to http://130.237.232.237:80/
[07:00:28] - Couldn't send HTTP request to server
[07:00:28] + Could not connect to Work Server (results)
[07:00:28]     (130.237.232.237:80)
[07:00:28] - Error: Could not transmit unit 09 (completed November 22) to work server.
[07:00:28] - 1 failed uploads of this unit.
[07:00:28]   Keeping unit 09 in queue.
[07:00:28] Trying to send all finished work units
[07:00:28] Project: 6904 (Run 2, Clone 4, Gen 40)


[07:00:28] + Attempting to send results [November 22 07:00:28 UTC]
[07:00:28] - Reading file work/wuresults_09.dat from core
[07:00:28]   (Read 222352930 bytes from disk)
[07:00:28] Connecting to http://130.237.232.237:8080/
[07:00:28] - Couldn't send HTTP request to server
[07:00:28] + Could not connect to Work Server (results)
[07:00:28]     (130.237.232.237:8080)
[07:00:28] + Retrying using alternative port
[07:00:28] Connecting to http://130.237.232.237:80/
[07:00:28] - Couldn't send HTTP request to server
[07:00:28] + Could not connect to Work Server (results)
[07:00:28]     (130.237.232.237:80)
[07:00:28] - Error: Could not transmit unit 09 (completed November 22) to work server.
[07:00:28] - 2 failed uploads of this unit.


[07:00:28] + Attempting to send results [November 22 07:00:28 UTC]
[07:00:28] - Reading file work/wuresults_09.dat from core
[07:00:28]   (Read 222352930 bytes from disk)
[07:00:28] Connecting to http://130.237.165.141:8080/
[07:00:28] - Couldn't send HTTP request to server
[07:00:28] + Could not connect to Work Server (results)
[07:00:28]     (130.237.165.141:8080)
[07:00:28] + Retrying using alternative port
[07:00:28] Connecting to http://130.237.165.141:80/
[07:00:28] - Couldn't send HTTP request to server
[07:00:28] + Could not connect to Work Server (results)
[07:00:28]     (130.237.165.141:80)
[07:00:28]   Could not transmit unit 09 to Collection server; keeping in queue.
[07:00:28] + Sent 0 of 1 completed units to the server
[07:00:28] - Preparing to get new work unit...
[07:00:28] Cleaning up work directory
[07:00:28] + Attempting to get work packet
[07:00:28] Passkey found
[07:00:28] - Will indicate memory of 3500 MB
[07:00:28] - Connecting to assignment server
[07:00:28] Connecting to http://assign.stanford.edu:8080/
[07:00:29] Posted data.
[07:00:29] Initial: ED82; - Successful: assigned to (130.237.232.237).
[07:00:29] + News From Folding@Home: Welcome to Folding@Home
[07:00:29] Loaded queue successfully.
[07:00:29] Sent data
[07:00:29] Connecting to http://130.237.232.237:8080/
[07:00:42] Posted data.
[07:00:42] Initial: 0000; - Receiving payload (expected size: 57242567)
[07:01:14] - Downloaded at ~1746 kB/s
[07:01:14] - Averaged speed for that direction ~457 kB/s
[07:01:14] + Received work.
[07:01:14] Trying to send all finished work units
[07:01:14] Project: 6904 (Run 2, Clone 4, Gen 40)


[07:01:14] + Attempting to send results [November 22 07:01:14 UTC]
[07:01:14] - Reading file work/wuresults_09.dat from core
[07:01:14]   (Read 222352930 bytes from disk)
[07:01:14] Connecting to http://130.237.232.237:8080/
[07:01:14] - Couldn't send HTTP request to server
[07:01:14] + Could not connect to Work Server (results)
[07:01:14]     (130.237.232.237:8080)
[07:01:14] + Retrying using alternative port
[07:01:14] Connecting to http://130.237.232.237:80/
[07:01:14] - Couldn't send HTTP request to server
[07:01:14] + Could not connect to Work Server (results)
[07:01:14]     (130.237.232.237:80)
[07:01:15] - Error: Could not transmit unit 09 (completed November 22) to work server.
[07:01:15] - 3 failed uploads of this unit.


[07:01:15] + Attempting to send results [November 22 07:01:15 UTC]
[07:01:15] - Reading file work/wuresults_09.dat from core
[07:01:15]   (Read 222352930 bytes from disk)
[07:01:15] Connecting to http://130.237.165.141:8080/
[07:01:15] - Couldn't send HTTP request to server
[07:01:15] + Could not connect to Work Server (results)
[07:01:15]     (130.237.165.141:8080)
[07:01:15] + Retrying using alternative port
[07:01:15] Connecting to http://130.237.165.141:80/
[07:01:15] - Couldn't send HTTP request to server
[07:01:15] + Could not connect to Work Server (results)
[07:01:15]     (130.237.165.141:80)
[07:01:15]   Could not transmit unit 09 to Collection server; keeping in queue.
[07:01:15] + Sent 0 of 1 completed units to the server
[07:01:15] + Closed connections
[07:01:15] 
[07:01:15] + Processing work unit
[07:01:15] Core required: FahCore_a5.exe
[07:01:15] Core found.
[07:01:15] Working on queue slot 00 [November 22 07:01:15 UTC]
[07:01:15] + Working ...
[07:01:15] - Calling './FahCore_a5.exe -dir work/ -nice 19 -suffix 00 -np 16 -checkpoint 10 -verbose -lifeline 1969 -version 634'

[07:01:15] 
[07:01:15] *------------------------------*
[07:01:15] Folding@Home Gromacs SMP Core
[07:01:15] Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
[07:01:15] 
[07:01:15] Preparing to commence simulation
[07:01:15] - Looking at optimizations...
[07:01:15] - Created dyn
[07:01:15] - Files status OK
[07:01:22] - Expanded 57242055 -> 71846524 (decompressed 50.4 percent)
[07:01:22] Called DecompressByteArray: compressed_data_size=57242055 data_size=71846524, decompressed_data_size=71846524 diff=0
[07:01:22] - Digital signature verified
[07:01:22] 
[07:01:22] Project: 6903 (Run 5, Clone 6, Gen 8)
[07:01:22] 
[07:01:22] Assembly optimizations on if available.
[07:01:22] Entering M.D.
[07:01:31] Mapping NT from 16 to 16 
[07:01:37] Completed 0 out of 250000 steps  (0%)
[07:41:11] Completed 2500 out of 250000 steps  (1%)
[08:20:48] Completed 5000 out of 250000 steps  (2%)
[08:57:52] - Autosending finished units... [November 22 08:57:52 UTC]
[08:57:52] Trying to send all finished work units
[08:57:52] Project: 6904 (Run 2, Clone 4, Gen 40)


[08:57:52] + Attempting to send results [November 22 08:57:52 UTC]
[08:57:52] - Reading file work/wuresults_09.dat from core
[08:57:52]   (Read 222352930 bytes from disk)
[08:57:52] Connecting to http://130.237.232.237:8080/
[09:00:26] Completed 7500 out of 250000 steps  (3%)
[b][09:16:52] Posted data.
[09:16:52] Initial: 0000; - Uploaded at ~190 kB/s
[09:16:52] - Averaged speed for that direction ~127 kB/s
[09:16:52] - Server has already received unit.
[09:16:52] + Sent 0 of 1 completed units to the server
[09:16:52] - Autosend completed[/b]
[09:40:02] Completed 10000 out of 250000 steps  (4%)
Image
I7 2600k|P67A-UD4-b3|12G|Corsair AX1200|Asus GTX560 DCU TOP|
I7 2600k|P67A-UD4-b3|8G|Corsair AX850|Asus 8600GT|
2X AMD Opteron 6128 8 cores|8G|ASUS KGPE-D16|Noctua NH-U9D0
bruce
Posts: 20822
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by bruce »

Hi Alpineb1 (team 37412),
Your WU (P6904 R2 C4 G40) was added to the stats database on 2011-11-18 06:06:07 PST for 387670 points of credit.

That's 2011-11-18 14:06:07 UTC which is right near the beginning of that log. You probably cloned the client and for some reason both copies are running with the same MachineID. Whether that's what happened or not, the WU was uploading in some other copy of the client while it was restarting the same WU in the one with the log that you posted.

For an exact determination, you'll need to post the other log.
Alpineb1
Posts: 9
Joined: Mon Jun 08, 2009 1:11 pm
Hardware configuration: • ► › I7 2600K @ 4.9Ghz|P67A-UD4-B3|12G G.Skill 1600Mhz|Noctua NH-D14|Solid 3 60GB|Asus GTX560 DCU II TOP|Corsair AX1200|Lancool PC-K62|Corsair SP2500
• ► › I7 2600K @ 4.5Ghz|P67A-UD4-B3|8GO G.Skill 1600Mhz|Noctua NH-D14|Evga GTX450|Corsair AX850|Lancool PC-K62
• ► › 2X AMD Opteron 6128 8 cores | 8G DDR3 Gskill Ripjaws | ASUS KGPE-D16 | Seasonic 560W | Noctua NH-U9D0
Location: Montréal

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by Alpineb1 »

Hello Bruce. Very strange about that cloning thing since i only have 1 multi cpu machine.

So what i can understand, by looking at my log , i have done 2 times in a row that wu....



Log is too big to post it... im gonna upload it somewhere later



Here the log:

http://www.wupload.com/file/2536665102/log.rtf
Image
I7 2600k|P67A-UD4-b3|12G|Corsair AX1200|Asus GTX560 DCU TOP|
I7 2600k|P67A-UD4-b3|8G|Corsair AX850|Asus 8600GT|
2X AMD Opteron 6128 8 cores|8G|ASUS KGPE-D16|Noctua NH-U9D0
bruce
Posts: 20822
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by bruce »

Do you happen to be running something called Langouste?

In any case, you did receive credit for it, and you can only get credit for the same WU once, so the "already received" message was correct.
Alpineb1
Posts: 9
Joined: Mon Jun 08, 2009 1:11 pm
Hardware configuration: • ► › I7 2600K @ 4.9Ghz|P67A-UD4-B3|12G G.Skill 1600Mhz|Noctua NH-D14|Solid 3 60GB|Asus GTX560 DCU II TOP|Corsair AX1200|Lancool PC-K62|Corsair SP2500
• ► › I7 2600K @ 4.5Ghz|P67A-UD4-B3|8GO G.Skill 1600Mhz|Noctua NH-D14|Evga GTX450|Corsair AX850|Lancool PC-K62
• ► › 2X AMD Opteron 6128 8 cores | 8G DDR3 Gskill Ripjaws | ASUS KGPE-D16 | Seasonic 560W | Noctua NH-U9D0
Location: Montréal

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by Alpineb1 »

yes, im running langouste.


if i can only have credit 1 time, why i did get that wu 2 times ?
Image
I7 2600k|P67A-UD4-b3|12G|Corsair AX1200|Asus GTX560 DCU TOP|
I7 2600k|P67A-UD4-b3|8G|Corsair AX850|Asus 8600GT|
2X AMD Opteron 6128 8 cores|8G|ASUS KGPE-D16|Noctua NH-U9D0
gwildperson
Posts: 450
Joined: Tue Dec 04, 2007 8:36 pm

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by gwildperson »

You have two choices. Talk to the langouste developer and see if it might have confused the server by altering what it expects from the client. Or run the V7 beta client, which doesn't need langouste.
MtM
Posts: 1579
Joined: Fri Jun 27, 2008 2:20 pm
Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot
Location: The Netherlands
Contact:

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by MtM »

The log you posted on that site is the one you already posted a part of, it does not show what happened before the wu was started ( or, when you first submitted the work unit and had it start again ).
Alpineb1
Posts: 9
Joined: Mon Jun 08, 2009 1:11 pm
Hardware configuration: • ► › I7 2600K @ 4.9Ghz|P67A-UD4-B3|12G G.Skill 1600Mhz|Noctua NH-D14|Solid 3 60GB|Asus GTX560 DCU II TOP|Corsair AX1200|Lancool PC-K62|Corsair SP2500
• ► › I7 2600K @ 4.5Ghz|P67A-UD4-B3|8GO G.Skill 1600Mhz|Noctua NH-D14|Evga GTX450|Corsair AX850|Lancool PC-K62
• ► › 2X AMD Opteron 6128 8 cores | 8G DDR3 Gskill Ripjaws | ASUS KGPE-D16 | Seasonic 560W | Noctua NH-U9D0
Location: Montréal

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by Alpineb1 »

MtM: this is all the infos i have in the log.

Anyway, i can't do anything...


Fold ON !!
Image
I7 2600k|P67A-UD4-b3|12G|Corsair AX1200|Asus GTX560 DCU TOP|
I7 2600k|P67A-UD4-b3|8G|Corsair AX850|Asus 8600GT|
2X AMD Opteron 6128 8 cores|8G|ASUS KGPE-D16|Noctua NH-U9D0
codysluder
Posts: 1024
Joined: Sun Dec 02, 2007 12:43 pm

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by codysluder »

gwildperson wrote:You have two choices. Talk to the langouste developer and see if it might have confused the server by altering what it expects from the client. Or run the V7 beta client, which doesn't need langouste.
Make that three. You have a choice to disable langouste.

Only you can decide what is right for your system, not one of us.
MtM
Posts: 1579
Joined: Fri Jun 27, 2008 2:20 pm
Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot
Location: The Netherlands
Contact:

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by MtM »

Alpineb1 wrote:MtM: this is all the infos i have in the log.

Anyway, i can't do anything...


Fold ON !!
FAHlog-prev.txt?
Alpineb1
Posts: 9
Joined: Mon Jun 08, 2009 1:11 pm
Hardware configuration: • ► › I7 2600K @ 4.9Ghz|P67A-UD4-B3|12G G.Skill 1600Mhz|Noctua NH-D14|Solid 3 60GB|Asus GTX560 DCU II TOP|Corsair AX1200|Lancool PC-K62|Corsair SP2500
• ► › I7 2600K @ 4.5Ghz|P67A-UD4-B3|8GO G.Skill 1600Mhz|Noctua NH-D14|Evga GTX450|Corsair AX850|Lancool PC-K62
• ► › 2X AMD Opteron 6128 8 cores | 8G DDR3 Gskill Ripjaws | ASUS KGPE-D16 | Seasonic 560W | Noctua NH-U9D0
Location: Montréal

Re: Project: 6904 (Run 2, Clone 4, Gen 40) No Credit

Post by Alpineb1 »

MtM: that was the FAHlog-prev
Image
I7 2600k|P67A-UD4-b3|12G|Corsair AX1200|Asus GTX560 DCU TOP|
I7 2600k|P67A-UD4-b3|8G|Corsair AX850|Asus 8600GT|
2X AMD Opteron 6128 8 cores|8G|ASUS KGPE-D16|Noctua NH-U9D0
Post Reply