130.237.232.237 and 130.237.165.141

Moderators: Site Moderators, FAHC Science Team

Post Reply
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

130.237.232.237 and 130.237.165.141

Post by RipD »

I can't tell if I got no points for this WU or just no bonus points. No changes to my folding ID and I don't see how I could have gone below 80% completion rate. Just FYI.

Code: Select all

[07:51:33] + Processing work unit
[07:51:33] Core required: FahCore_a5.exe
[07:51:33] Core found.
[07:51:33] Working on queue slot 05 [March 5 07:51:33 UTC]
[07:51:33] + Working ...
[07:51:33] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 05 -np 8 -checkpoint 3 -verbose -lifeline 5752 -version 634'

[07:51:33] 
[07:51:33] *------------------------------*
[07:51:33] Folding@Home Gromacs SMP Core
[07:51:33] Version 2.27 (Mar 12, 2010)
[07:51:33] 
[07:51:33] Preparing to commence simulation
[07:51:33] - Looking at optimizations...
[07:51:33] - Created dyn
[07:51:33] - Files status OK
[07:51:37] - Expanded 24860973 -> 30796292 (decompressed 123.8 percent)
[07:51:37] Called DecompressByteArray: compressed_data_size=24860973 data_size=30796292, decompressed_data_size=30796292 diff=0
[07:51:37] - Digital signature verified
[07:51:37] 
[07:51:37] Project: 6901 (Run 2, Clone 12, Gen 3)
[07:51:37] 
[07:51:37] Assembly optimizations on if available.
[07:51:37] Entering M.D.
[07:51:44] Mapping NT from 8 to 8 
[07:51:46] Completed 0 out of 250000 steps  (0%)
[08:21:26] Completed 2500 out of 250000 steps  (1%)
[08:51:00] Completed 5000 out of 250000 steps  (2%)
[09:20:36] Completed 7500 out of 250000 steps  (3%)
[09:43:07] - Autosending finished units... [March 5 09:43:07 UTC]
[09:43:07] Trying to send all finished work units
[09:43:07] + No unsent completed units remaining.
[09:43:07] - Autosend completed
[09:50:11] Completed 10000 out of 250000 steps  (4%)
[10:19:50] Completed 12500 out of 250000 steps  (5%)
[10:49:24] Completed 15000 out of 250000 steps  (6%)
[11:18:57] Completed 17500 out of 250000 steps  (7%)
[11:48:27] Completed 20000 out of 250000 steps  (8%)
[12:17:56] Completed 22500 out of 250000 steps  (9%)
[12:47:27] Completed 25000 out of 250000 steps  (10%)
[13:16:58] Completed 27500 out of 250000 steps  (11%)
[13:46:31] Completed 30000 out of 250000 steps  (12%)
[14:16:01] Completed 32500 out of 250000 steps  (13%)
[14:45:32] Completed 35000 out of 250000 steps  (14%)
[15:15:04] Completed 37500 out of 250000 steps  (15%)
[15:43:07] - Autosending finished units... [March 5 15:43:07 UTC]
[15:43:07] Trying to send all finished work units
[15:43:07] + No unsent completed units remaining.
[15:43:07] - Autosend completed
[15:44:38] Completed 40000 out of 250000 steps  (16%)
[16:14:11] Completed 42500 out of 250000 steps  (17%)
[16:43:37] Completed 45000 out of 250000 steps  (18%)
[17:13:04] Completed 47500 out of 250000 steps  (19%)
[17:42:29] Completed 50000 out of 250000 steps  (20%)
[18:11:57] Completed 52500 out of 250000 steps  (21%)
[18:41:27] Completed 55000 out of 250000 steps  (22%)
[19:11:00] Completed 57500 out of 250000 steps  (23%)
[19:40:38] Completed 60000 out of 250000 steps  (24%)
[20:10:18] Completed 62500 out of 250000 steps  (25%)
[20:39:57] Completed 65000 out of 250000 steps  (26%)
[21:09:36] Completed 67500 out of 250000 steps  (27%)
[21:39:16] Completed 70000 out of 250000 steps  (28%)
[21:43:07] - Autosending finished units... [March 5 21:43:07 UTC]
[21:43:07] Trying to send all finished work units
[21:43:07] + No unsent completed units remaining.
[21:43:07] - Autosend completed
[22:08:58] Completed 72500 out of 250000 steps  (29%)
[22:38:41] Completed 75000 out of 250000 steps  (30%)
[23:08:21] Completed 77500 out of 250000 steps  (31%)
[23:38:14] Completed 80000 out of 250000 steps  (32%)
[23:41:17] Killing all core threads
[23:41:17] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[23:41:17] ***** Got a SIGTERM signal (2)
[23:41:17] Killing all core threads
[23:41:17] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [March 5 23:48:44 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Andy\AppData\Roaming\FAH
Executable: C:\Users\Andy\AppData\Roaming\FAH\fah.exe
Arguments: -smp -bigadv -verbosity 9 

[23:48:44] - Ask before connecting: No
[23:48:44] - User name: Andy_R (Team 32)
[23:48:44] - User ID: 51685222524FD41
[23:48:44] - Machine ID: 7
[23:48:44] 
[23:48:45] Loaded queue successfully.
[23:48:45] 
[23:48:45] - Autosending finished units... [March 5 23:48:45 UTC]
[23:48:45] + Processing work unit
[23:48:45] Trying to send all finished work units
[23:48:45] Core required: FahCore_a5.exe
[23:48:45] + No unsent completed units remaining.
[23:48:45] Core found.
[23:48:45] - Autosend completed
[23:48:45] Working on queue slot 05 [March 5 23:48:45 UTC]
[23:48:45] + Working ...
[23:48:45] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 05 -np 8 -checkpoint 3 -verbose -lifeline 2584 -version 634'

[23:48:45] 
[23:48:45] *------------------------------*
[23:48:45] Folding@Home Gromacs SMP Core
[23:48:45] Version 2.27 (Mar 12, 2010)
[23:48:45] 
[23:48:45] Preparing to commence simulation
[23:48:45] - Ensuring status. Please wait.
[23:48:54] - Looking at optimizations...
[23:48:54] - Working with standard loops on this execution.
[23:48:54] - Previous termination of core was improper.
[23:48:54] - Files status OK
[23:48:58] - Expanded 24860973 -> 30796292 (decompressed 123.8 percent)
[23:48:58] Called DecompressByteArray: compressed_data_size=24860973 data_size=30796292, decompressed_data_size=30796292 diff=0
[23:48:58] - Digital signature verified
[23:48:58] 
[23:48:58] Project: 6901 (Run 2, Clone 12, Gen 3)
[23:48:58] 
[23:48:59] Entering M.D.
[23:49:05] Using Gromacs checkpoints
[23:49:05] Mapping NT from 8 to 8 
[23:49:09] Resuming from checkpoint
[23:49:10] Verified work/wudata_05.log
[23:49:10] Verified work/wudata_05.trr
[23:49:10] Verified work/wudata_05.xtc
[23:49:10] Verified work/wudata_05.edr
[23:49:11] Completed 80130 out of 250000 steps  (32%)
[23:55:22] Received EVENT= from OS -- shutting down w/ INTERRUPTED signal; events=[CtrlC= Close= Break= Shutdown= LogOff=]
[23:55:22] Folding@home Core Shutdown: INTERRUPTED


--- Opening Log file [March 6 00:10:57 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Andy\AppData\Roaming\FAH
Executable: C:\Users\Andy\AppData\Roaming\FAH\fah.exe
Arguments: -smp -bigadv -verbosity 9 

[00:10:57] - Ask before connecting: No
[00:10:57] - User name: Andy_R (Team 32)
[00:10:57] - User ID: 51685222524FD41
[00:10:57] - Machine ID: 7
[00:10:57] 
[00:10:57] Loaded queue successfully.
[00:10:57] 
[00:10:57] - Autosending finished units... [March 6 00:10:57 UTC]
[00:10:57] + Processing work unit
[00:10:57] Trying to send all finished work units
[00:10:57] Core required: FahCore_a5.exe
[00:10:57] + No unsent completed units remaining.
[00:10:57] Core found.
[00:10:57] - Autosend completed
[00:10:57] Working on queue slot 05 [March 6 00:10:57 UTC]
[00:10:57] + Working ...
[00:10:57] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 05 -np 8 -checkpoint 3 -verbose -lifeline 3408 -version 634'

[00:10:57] 
[00:10:57] *------------------------------*
[00:10:57] Folding@Home Gromacs SMP Core
[00:10:57] Version 2.27 (Mar 12, 2010)
[00:10:57] 
[00:10:57] Preparing to commence simulation
[00:10:57] - Looking at optimizations...
[00:10:57] - Files status OK
[00:11:01] - Expanded 24860973 -> 30796292 (decompressed 123.8 percent)
[00:11:01] Called DecompressByteArray: compressed_data_size=24860973 data_size=30796292, decompressed_data_size=30796292 diff=0
[00:11:01] - Digital signature verified
[00:11:01] 
[00:11:01] Project: 6901 (Run 2, Clone 12, Gen 3)
[00:11:01] 
[00:11:01] Assembly optimizations on if available.
[00:11:01] Entering M.D.
[00:11:07] Using Gromacs checkpoints
[00:11:08] Mapping NT from 8 to 8 
[00:11:12] Resuming from checkpoint
[00:11:13] Verified work/wudata_05.log
[00:11:13] Verified work/wudata_05.trr
[00:11:13] Verified work/wudata_05.xtc
[00:11:13] Verified work/wudata_05.edr
[00:11:14] Completed 80325 out of 250000 steps  (32%)
[00:38:11] Completed 82500 out of 250000 steps  (33%)
[01:08:26] Completed 85000 out of 250000 steps  (34%)
[01:38:35] Completed 87500 out of 250000 steps  (35%)
[02:09:12] Completed 90000 out of 250000 steps  (36%)
[02:39:20] Completed 92500 out of 250000 steps  (37%)
[03:09:27] Completed 95000 out of 250000 steps  (38%)
[03:39:33] Completed 97500 out of 250000 steps  (39%)
[04:09:42] Completed 100000 out of 250000 steps  (40%)
[04:39:50] Completed 102500 out of 250000 steps  (41%)
[05:09:59] Completed 105000 out of 250000 steps  (42%)
[05:40:06] Completed 107500 out of 250000 steps  (43%)
[06:10:17] Completed 110000 out of 250000 steps  (44%)
[06:10:57] - Autosending finished units... [March 6 06:10:57 UTC]
[06:10:57] Trying to send all finished work units
[06:10:57] + No unsent completed units remaining.
[06:10:57] - Autosend completed
[06:40:33] Completed 112500 out of 250000 steps  (45%)
[07:10:40] Completed 115000 out of 250000 steps  (46%)
[07:40:48] Completed 117500 out of 250000 steps  (47%)
[08:11:22] Completed 120000 out of 250000 steps  (48%)
[08:42:00] Completed 122500 out of 250000 steps  (49%)
[09:12:12] Completed 125000 out of 250000 steps  (50%)
[09:42:23] Completed 127500 out of 250000 steps  (51%)
[10:12:34] Completed 130000 out of 250000 steps  (52%)
[10:42:45] Completed 132500 out of 250000 steps  (53%)
[11:12:58] Completed 135000 out of 250000 steps  (54%)
[11:44:21] Completed 137500 out of 250000 steps  (55%)
[12:10:57] - Autosending finished units... [March 6 12:10:57 UTC]
[12:10:57] Trying to send all finished work units
[12:10:57] + No unsent completed units remaining.
[12:10:57] - Autosend completed
[12:14:35] Completed 140000 out of 250000 steps  (56%)
[12:44:50] Completed 142500 out of 250000 steps  (57%)
[13:15:04] Completed 145000 out of 250000 steps  (58%)
[13:45:21] Completed 147500 out of 250000 steps  (59%)
[14:15:38] Completed 150000 out of 250000 steps  (60%)
[14:45:54] Completed 152500 out of 250000 steps  (61%)
[15:16:09] Completed 155000 out of 250000 steps  (62%)
[15:46:23] Completed 157500 out of 250000 steps  (63%)
[16:16:37] Completed 160000 out of 250000 steps  (64%)
[16:46:50] Completed 162500 out of 250000 steps  (65%)
[17:17:05] Completed 165000 out of 250000 steps  (66%)
[17:47:23] Completed 167500 out of 250000 steps  (67%)
[18:10:57] - Autosending finished units... [March 6 18:10:57 UTC]
[18:10:57] Trying to send all finished work units
[18:10:57] + No unsent completed units remaining.
[18:10:57] - Autosend completed
[18:17:38] Completed 170000 out of 250000 steps  (68%)
[18:46:00] Killing all core threads
[18:46:00] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[18:46:00] ***** Got a SIGTERM signal (2)
[18:46:00] Killing all core threads
[18:46:00] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [March 6 19:23:18 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Andy\AppData\Roaming\FAH
Executable: C:\Users\Andy\AppData\Roaming\FAH\fah.exe
Arguments: -smp -bigadv -verbosity 9 

[19:23:18] - Ask before connecting: No
[19:23:18] - User name: Andy_R (Team 32)
[19:23:18] - User ID: 51685222524FD41
[19:23:18] - Machine ID: 7
[19:23:18] 
[19:23:18] Loaded queue successfully.
[19:23:18] 
[19:23:18] - Autosending finished units... [March 6 19:23:18 UTC]
[19:23:18] + Processing work unit
[19:23:18] Trying to send all finished work units
[19:23:18] Core required: FahCore_a5.exe
[19:23:18] + No unsent completed units remaining.
[19:23:18] Core found.
[19:23:18] - Autosend completed
[19:23:18] Working on queue slot 05 [March 6 19:23:18 UTC]
[19:23:18] + Working ...
[19:23:18] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 05 -np 8 -checkpoint 3 -verbose -lifeline 2604 -version 634'

[19:23:18] 
[19:23:18] *------------------------------*
[19:23:18] Folding@Home Gromacs SMP Core
[19:23:18] Version 2.27 (Mar 12, 2010)
[19:23:18] 
[19:23:18] Preparing to commence simulation
[19:23:18] - Ensuring status. Please wait.
[19:23:28] - Looking at optimizations...
[19:23:28] - Working with standard loops on this execution.
[19:23:28] - Previous termination of core was improper.
[19:23:28] - Files status OK
[19:23:32] - Expanded 24860973 -> 30796292 (decompressed 123.8 percent)
[19:23:32] Called DecompressByteArray: compressed_data_size=24860973 data_size=30796292, decompressed_data_size=30796292 diff=0
[19:23:32] - Digital signature verified
[19:23:32] 
[19:23:32] Project: 6901 (Run 2, Clone 12, Gen 3)
[19:23:32] 
[19:23:32] Entering M.D.
[19:23:38] Using Gromacs checkpoints
[19:23:39] Mapping NT from 8 to 8 
[19:23:43] Resuming from checkpoint
[19:23:43] Verified work/wudata_05.log
[19:23:43] Verified work/wudata_05.trr
[19:23:43] Verified work/wudata_05.xtc
[19:23:43] Verified work/wudata_05.edr
[19:23:44] Completed 172205 out of 250000 steps  (68%)
[19:27:27] Completed 172500 out of 250000 steps  (69%)
[19:57:49] Completed 175000 out of 250000 steps  (70%)
[20:28:10] Completed 177500 out of 250000 steps  (71%)
[20:58:31] Completed 180000 out of 250000 steps  (72%)
[21:28:47] Completed 182500 out of 250000 steps  (73%)
[21:59:02] Completed 185000 out of 250000 steps  (74%)
[22:29:20] Completed 187500 out of 250000 steps  (75%)
[22:59:42] Completed 190000 out of 250000 steps  (76%)
[23:30:07] Completed 192500 out of 250000 steps  (77%)
[00:00:22] Completed 195000 out of 250000 steps  (78%)
[00:30:43] Completed 197500 out of 250000 steps  (79%)
[01:01:08] Completed 200000 out of 250000 steps  (80%)
[01:23:18] - Autosending finished units... [March 7 01:23:18 UTC]
[01:23:18] Trying to send all finished work units
[01:23:18] + No unsent completed units remaining.
[01:23:18] - Autosend completed
[01:31:31] Completed 202500 out of 250000 steps  (81%)
[02:02:23] Completed 205000 out of 250000 steps  (82%)
[02:32:41] Completed 207500 out of 250000 steps  (83%)
[03:02:58] Completed 210000 out of 250000 steps  (84%)
[03:33:11] Completed 212500 out of 250000 steps  (85%)
[04:03:24] Completed 215000 out of 250000 steps  (86%)
[04:33:40] Completed 217500 out of 250000 steps  (87%)
[05:03:53] Completed 220000 out of 250000 steps  (88%)
[05:34:03] Completed 222500 out of 250000 steps  (89%)
[06:04:13] Completed 225000 out of 250000 steps  (90%)
[06:34:19] Completed 227500 out of 250000 steps  (91%)
[07:04:24] Completed 230000 out of 250000 steps  (92%)
[07:23:18] - Autosending finished units... [March 7 07:23:18 UTC]
[07:23:18] Trying to send all finished work units
[07:23:18] + No unsent completed units remaining.
[07:23:18] - Autosend completed
[07:34:30] Completed 232500 out of 250000 steps  (93%)
[08:04:42] Completed 235000 out of 250000 steps  (94%)
[08:35:08] Completed 237500 out of 250000 steps  (95%)
[09:05:12] Completed 240000 out of 250000 steps  (96%)
[09:35:17] Completed 242500 out of 250000 steps  (97%)
[10:05:20] Completed 245000 out of 250000 steps  (98%)
[10:35:24] Completed 247500 out of 250000 steps  (99%)
[11:05:26] Completed 250000 out of 250000 steps  (100%)
[11:05:36] DynamicWrapper: Finished Work Unit: sleep=10000
[11:05:46] 
[11:05:46] Finished Work Unit:
[11:05:46] - Reading up to 52713120 from "work/wudata_05.trr": Read 52713120
[11:05:47] trr file hash check passed.
[11:05:47] - Reading up to 47030548 from "work/wudata_05.xtc": Read 47030548
[11:05:47] xtc file hash check passed.
[11:05:47] edr file hash check passed.
[11:05:47] logfile size: 252243
[11:05:47] Leaving Run
[11:05:50] - Writing 100163851 bytes of core data to disk...
[11:06:24] Done: 100163339 -> 96627647 (compressed to 10.7 percent)
[11:06:25]   ... Done.
[11:06:34] - Shutting down core
[11:06:34] 
[11:06:34] Folding@home Core Shutdown: FINISHED_UNIT
[11:06:39] CoreStatus = 64 (100)
[11:06:39] Unit 5 finished with 64 percent of time to deadline remaining.
[11:06:39] Updated performance fraction: 0.629873
[11:06:39] Sending work to server
[11:06:39] Project: 6901 (Run 2, Clone 12, Gen 3)


[11:06:39] + Attempting to send results [March 7 11:06:39 UTC]
[11:06:39] - Reading file work/wuresults_05.dat from core
[11:06:39]   (Read 96628159 bytes from disk)
[11:06:39] Connecting to http://130.237.232.237:8080/
[12:19:31] - Couldn't send HTTP request to server
[12:19:31] + Could not connect to Work Server (results)
[12:19:31]     (130.237.232.237:8080)
[12:19:31] + Retrying using alternative port
[12:19:31] Connecting to http://130.237.232.237:80/
[12:20:23] - Couldn't send HTTP request to server
[12:20:23] + Could not connect to Work Server (results)
[12:20:23]     (130.237.232.237:80)
[12:20:23] - Error: Could not transmit unit 05 (completed March 7) to work server.
[12:20:23] - 1 failed uploads of this unit.
[12:20:23]   Keeping unit 05 in queue.
[12:20:23] Trying to send all finished work units
[12:20:23] Project: 6901 (Run 2, Clone 12, Gen 3)


[12:20:23] + Attempting to send results [March 7 12:20:23 UTC]
[12:20:23] - Reading file work/wuresults_05.dat from core
[12:20:23]   (Read 96628159 bytes from disk)
[12:20:23] Connecting to http://130.237.232.237:8080/
[12:23:47] - Couldn't send HTTP request to server
[12:23:47] + Could not connect to Work Server (results)
[12:23:47]     (130.237.232.237:8080)
[12:23:47] + Retrying using alternative port
[12:23:47] Connecting to http://130.237.232.237:80/
[12:44:50] - Couldn't send HTTP request to server
[12:44:50] + Could not connect to Work Server (results)
[12:44:50]     (130.237.232.237:80)
[12:44:50] - Error: Could not transmit unit 05 (completed March 7) to work server.
[12:44:50] - 2 failed uploads of this unit.


[12:44:50] + Attempting to send results [March 7 12:44:50 UTC]
[12:44:50] - Reading file work/wuresults_05.dat from core
[12:44:50]   (Read 96628159 bytes from disk)
[12:44:50] Connecting to http://130.237.165.141:8080/
[12:44:51] - Couldn't send HTTP request to server
[12:44:51] + Could not connect to Work Server (results)
[12:44:51]     (130.237.165.141:8080)
[12:44:51] + Retrying using alternative port
[12:44:51] Connecting to http://130.237.165.141:80/
[12:44:51] - Couldn't send HTTP request to server
[12:44:51] + Could not connect to Work Server (results)
[12:44:51]     (130.237.165.141:80)
[12:44:51]   Could not transmit unit 05 to Collection server; keeping in queue.
[12:44:51] + Sent 0 of 1 completed units to the server
[12:44:51] - Preparing to get new work unit...
[12:44:51] Cleaning up work directory
[12:44:51] + Attempting to get work packet
[12:44:51] Passkey found
[12:44:51] - Will indicate memory of 8173 MB
[12:44:51] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7
[12:44:51] - Connecting to assignment server
[12:44:51] Connecting to http://assign.stanford.edu:8080/
[12:44:52] Posted data.
[12:44:52] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[12:44:52] + News From Folding@Home: Welcome to Folding@Home
[12:44:52] Loaded queue successfully.
[12:44:52] Sent data
[12:44:52] Connecting to http://171.67.108.22:8080/
[12:45:01] Posted data.
[12:45:01] Initial: 0000; - Receiving payload (expected size: 25476210)
[12:47:24] - Downloaded at ~173 kB/s
[12:47:24] - Averaged speed for that direction ~143 kB/s
[12:47:24] + Received work.
[12:47:24] Trying to send all finished work units
[12:47:24] Project: 6901 (Run 2, Clone 12, Gen 3)


[12:47:24] + Attempting to send results [March 7 12:47:24 UTC]
[12:47:24] - Reading file work/wuresults_05.dat from core
[12:47:24]   (Read 96628159 bytes from disk)
[12:47:24] Connecting to http://130.237.232.237:8080/
[12:52:34] - Couldn't send HTTP request to server
[12:52:34] + Could not connect to Work Server (results)
[12:52:34]     (130.237.232.237:8080)
[12:52:34] + Retrying using alternative port
[12:52:34] Connecting to http://130.237.232.237:80/
[12:53:38] - Couldn't send HTTP request to server
[12:53:38] + Could not connect to Work Server (results)
[12:53:38]     (130.237.232.237:80)
[12:53:38] - Error: Could not transmit unit 05 (completed March 7) to work server.
[12:53:38] - 3 failed uploads of this unit.


[12:53:38] + Attempting to send results [March 7 12:53:38 UTC]
[12:53:38] - Reading file work/wuresults_05.dat from core
[12:53:38]   (Read 96628159 bytes from disk)
[12:53:38] Connecting to http://130.237.165.141:8080/
[12:53:39] - Couldn't send HTTP request to server
[12:53:39] + Could not connect to Work Server (results)
[12:53:39]     (130.237.165.141:8080)
[12:53:39] + Retrying using alternative port
[12:53:39] Connecting to http://130.237.165.141:80/
[12:53:39] - Couldn't send HTTP request to server
[12:53:39] + Could not connect to Work Server (results)
[12:53:39]     (130.237.165.141:80)
[12:53:39]   Could not transmit unit 05 to Collection server; keeping in queue.
[12:53:39] + Sent 0 of 1 completed units to the server
[12:53:39] + Closed connections
Last edited by RipD on Tue Mar 08, 2011 11:48 pm, edited 2 times in total.
Image
Joshua_Mahr
Posts: 11
Joined: Sun Mar 06, 2011 11:19 pm

Re: Project 6901 (Run 2, Clone 12, Gen 3) missing points

Post by Joshua_Mahr »

I am having the same exact problem. I have not been able to fix it yet. Let me know what you come up with.
Main Rig : i7-2600k @5.0Ghz/Maximus 4 Extreme/GSkill DDR3-1600/ASUS GTX580 CUII/Vertex 2/HX850/NH-D14/Dragon Rider
Folder Rig : i7-2600k @4.75/ASUS P8P67 Pro/GSkill DDR3-2166/ASUS GTX570 x2 SLi/Vertex 2/HX850/H70/Haf X

Image

Image
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Project 6901 (Run 2, Clone 12, Gen 3) missing points

Post by bruce »

There's no record of Project: 6901 (Run 2, Clone 12, Gen 3) being completed. The portion of your log that you posted doesn't show the results being uploaded yet.

The message "Couldn't send HTTP request to server" is reported for both 130.237.232.237 and 130.237.165.141
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

Re: Project 6901 (Run 2, Clone 12, Gen 3) missing points

Post by RipD »

FYI, I've completed at least 6 bigadv WUs with no issue until this one. Currently folding one that's at 55% - will see what happens with it.

Stanford guys, would it be possible to do any of the following:
  • 1. Give folders access to a table dates/times when each WUs was downloaded, completed, and returned? It's possible I missed the 80% cut-off. I don't see how it's possible, but it could be. I'm not watching all my GPU folders closely.
    2. If you did publish WU data by user, include a status code indicating how it was processes (assessed bonus points, reason if not assessed, etc.)
    3. Possibly indicate a status when the WU is returned so we'll know what happed with it?
I understand that all this takes effort and that you have limited resources. I also get that giving up this information could drive up the noise level on this forum with challenges to the data, requests for more information, etc. However, this possibly could be addressed with a small army of volunteers to field this questions (similar to what you do now, I believe). Perhaps Bruce or somebody else could oversee this effort.

Hopping on my soapbox...

I know you are all hard at work trying to solve diseases - I would hate to see that get interrupted. However, the more folders you have, the more research gets done. The more current folders are happy, content, and satisfied with the tools they use, the more folders you will have the more affinity you'll have with each folder. You could argue that points don't really matter. That's a completely reasonable and logical argument.

But the bottom line is we do fold for points. Human beings are competitive in nature respond to stimuli. This stimulus in this case is points. We apply effort and see points as a result. If people lose confidence in the reward system, they lose affinity for folding. (Yes, I got an A in psych 101.)

I know this is being looked at that those involved want us to have the best possible folding experience. I don't know if these ideas are practical or feasible. Just food for thought.

And if I have to lose a few points occasionally in order to keep folding, so be it. No software is perfect.
Image
codysluder
Posts: 1024
Joined: Sun Dec 02, 2007 12:43 pm

Re: 130.237.232.237 and 130.237.165.141

Post by codysluder »

I predict that your soapbox will yield no response. The Mods do maybe 10 or 20 transactions a day. Opening that capability to the world would produce maybe 50000 transactions a day. The stanford guys would have to ban anyone who use more that maybe one transaction a day to keep the total manageable. It's pretty simple to ask a Mod, and they do seem to be pretty responsive.

HFM and FahMon can keep a record of your WUs locally. Use that capability, and if it doesn't meet your needs, write one yourself or work with the 3rd party authors to enhance what it already does.
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

Re: Project 6901 (Run 2, Clone 12, Gen 3) missing point

Post by RipD »

I hear you. However, tracking WUs myself is not the issue - I would like to see what Stanford does WUs when they are submitted.
Image
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

Re: 130.237.232.237 and 130.237.165.141

Post by RipD »

So don't I feel silly. I somehow thought this WU had been uploaded - it has not. I'm getting an error on every upload attempt.

Thanks to the mod (Bruce?) who is paying closer attention than am I for moving this. Sorry for the calling out the points. Issue.

Anything else I can try to get this WU to upload?
Image
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 130.237.232.237 and 130.237.165.141

Post by 7im »

Same problem and solution as here: Project: 6901 "Server reports problem with unit" assuming you downloaded the work unit at about the same time as the originator of that thread.

Problem has since been fixed on the server. But if this WU was downloaded before the fix, it won't ever get sent back.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

Re: 130.237.232.237 and 130.237.165.141

Post by RipD »

Thanks 7im, but this appears to be a different issue. That issue appears to only take place with a 32 bit OS - I'm running Win 7 64. I also never got a compression error, "Server reports problem with unit" or any other message. It's just not uploading to the server.

Checked my queue info and then tried to send that result. It just sits there. Ideas?

Code: Select all

--- Opening Log file [March 9 02:44:32 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Andy\AppData\Roaming\FAH
Executable: C:\Users\Andy\AppData\Roaming\FAH\fah.exe
Arguments: -queueinfo -smp -bigadv -verbosity 9 

[02:44:32] - Ask before connecting: No
[02:44:32] - User name: Andy_R (Team 32)
[02:44:32] - User ID: 51685222524FD41
[02:44:32] - Machine ID: 7
[02:44:32] 
[02:44:32] Loaded queue successfully.
[02:44:32] Printing Queue Information
Current Queue: 
Slot 07  Empty/Deleted
Project: 6900 (Run 35, Clone 11, Gen 23), Core: a3
Work server: 130.237.232.141:8080
Collection server: 130.237.165.141
Download date: February 27 00:16:37
Finished date: January 1 00:00:00

Slot 08  Empty/Deleted
Project: 6900 (Run 35, Clone 11, Gen 23), Core: a3
Work server: 130.237.232.141:8080
Collection server: 130.237.165.141
Download date: February 27 00:20:51
Finished date: January 1 00:00:00

Slot 09  Empty/Deleted
Project: 6900 (Run 35, Clone 11, Gen 23), Core: a3
Work server: 130.237.232.141:8080
Collection server: 130.237.165.141
Download date: February 27 00:25:04
Finished date: January 1 00:00:00

Slot 00  Empty/Deleted
Project: 6900 (Run 35, Clone 11, Gen 23), Core: a3
Work server: 130.237.232.141:8080
Collection server: 130.237.165.141
Download date: February 27 00:29:31
Finished date: January 1 00:00:00

Slot 01  Empty/Deleted
Project: 6900 (Run 35, Clone 11, Gen 23), Core: a3
Work server: 130.237.232.141:8080
Collection server: 130.237.165.141
Download date: February 27 02:23:59
Finished date: January 1 00:00:00

Slot 02  Empty/Deleted
Project: 6901 (Run 10, Clone 16, Gen 0), Core: a5
Work server: 130.237.232.237:8080
Collection server: 130.237.165.141
Download date: February 27 02:28:21
Finished date: March 1 03:23:42

Slot 03  Empty/Deleted
Project: 2686 (Run 1, Clone 8, Gen 85), Core: a3
Work server: 171.67.108.22:8080
Collection server: 171.67.108.25
Download date: March 1 04:04:37
Finished date: March 3 05:05:57

Slot 04  Empty/Deleted
Project: 6901 (Run 23, Clone 5, Gen 2), Core: a5
Work server: 130.237.232.237:8080
Collection server: 130.237.165.141
Download date: March 3 05:47:42
Finished date: March 5 07:11:19

Slot 05  Done     
Project: 6901 (Run 2, Clone 12, Gen 3), Core: a5
Work server: 130.237.232.237:8080
Collection server: 130.237.165.141
Download date: March 5 07:51:33
Finished date: March 7 11:06:39
Failed uploads: 8

Slot 06 *Ready    
Project: 2686 (Run 9, Clone 17, Gen 67), Core: a5
Work server: 171.67.108.22:8080
Collection server: 171.67.108.25
Download date: March 7 12:47:24
Deadline date: March 13 12:47:24

PF: 0.629873 based on last 4 slot(s)
[02:44:32] ***** Got a SIGTERM signal (2)
[02:44:32] Killing all core threads
[02:44:32] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [March 9 02:45:37 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Andy\AppData\Roaming\FAH
Executable: C:\Users\Andy\AppData\Roaming\FAH\fah.exe
Arguments: -send 5 -smp 8 -bigadv -verbosity 9 

[02:45:37] - Ask before connecting: No
[02:45:37] - User name: Andy_R (Team 32)
[02:45:37] - User ID: 51685222524FD41
[02:45:37] - Machine ID: 7
[02:45:37] 
[02:45:37] Loaded queue successfully.
[02:45:37] Attempting to return result(s) to server...
[02:45:37] Project: 6901 (Run 2, Clone 12, Gen 3)


[02:45:37] + Attempting to send results [March 9 02:45:37 UTC]
[02:45:37] - Reading file work/wuresults_05.dat from core
[02:45:37]   (Read 96628159 bytes from disk)
[02:45:37] Connecting to http://130.237.232.237:8080/
[03:10:08] Killing all core threads
[03:10:08] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown at user request.
[03:10:08] ***** Got a SIGTERM signal (2)
[03:10:08] Killing all core threads
[03:10:08] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.

Image
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

Re: 130.237.232.237 and 130.237.165.141

Post by RipD »

This WU did get submitted overnight. It looks like I got 55-60K credit vs. the originally projected 78K. Given how late it went in I'm surprised the number was that high.
Image
kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 130.237.232.237 and 130.237.165.141

Post by kasson »

Glad it went in. Communications issues are hard to debug (client vs. ISP vs. server). We've updated the server code with some new features that should reduce any server-side contribution to troubles such as these.
ChelseaOilman
Posts: 1037
Joined: Sun Dec 02, 2007 3:47 pm
Location: Colorado @ 10,000 feet

Re: 130.237.232.237 and 130.237.165.141

Post by ChelseaOilman »

RipD wrote:This WU did get submitted overnight. It looks like I got 55-60K credit vs. the originally projected 78K. Given how late it went in I'm surprised the number was that high.
Hi Andy_R (team 32),
Your WU (P6901 R2 C12 G3) was added to the stats database on 2011-03-08 21:09:35 for 57294.1 points of credit.
RipD
Posts: 71
Joined: Fri Dec 14, 2007 2:34 am

Re: 130.237.232.237 and 130.237.165.141

Post by RipD »

Thanks all. 55-60K was a nice estimate, huh? Thanks to CO for researching, and to Kasson for reading. Very impressive.
Image
Post Reply