Project: 6505 (Run 2, Clone 57, Gen 85) [Updated]

Moderators: Site Moderators, FAHC Science Team

Post Reply
Ilina
Posts: 4
Joined: Thu Jan 17, 2008 7:39 pm
Location: Montreal, Québec

Project: 6505 (Run 2, Clone 57, Gen 85) [Updated]

Post by Ilina »

Code: Select all

[04:25:18] Project: 6505 (Run 2, Clone 57, Gen 85)
[04:25:18] 
[04:25:18] Assembly optimizations on if available.
[04:25:18] Entering M.D.
[04:25:24] Gromacs error.
[04:25:24] 
[04:25:24] Folding@home Core Shutdown: UNKNOWN_ERROR
[04:25:28] CoreStatus = 79 (121)
[04:25:28] Client-core communications error: ERROR 0x79
[04:25:28] This is a sign of more serious problems, shutting down.
And I did delete my work and queue several time, and I'm still reciving that unis (6505). Any news on it ?

EDIT: If I change my machine ID number, I get a new unit, great! ... but the unit I'm getting right after is this unit...happenned 3 times yet. I tried to get rid of it by letting it expire, without success.
Last edited by Ilina on Fri Jan 28, 2011 9:13 am, edited 2 times in total.
Top
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Contact PantherX

Re: Project: 6505 (Run 2, Clone 57, Gen 85)

Post by PantherX »

Changing the Machine ID may give you a different WU.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Top
Ilina
Posts: 4
Joined: Thu Jan 17, 2008 7:39 pm
Location: Montreal, Québec

Re: Project: 6505 (Run 2, Clone 57, Gen 85)

Post by Ilina »

I did try, with no luck.
Top
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Contact PantherX

Re: Project: 6505 (Run 2, Clone 57, Gen 85)

Post by PantherX »

You meant that you:
1) Deleted the queue.dat file
2) Deleted the work folder
3) Changed the machine ID

And you are still being assigned the same WU (Project: 6505 (Run 2, Clone 57, Gen 85))? Because this is the first time that I have heard where this method didn't work. Please note that 6505 is a Project and you may still get different WUs from the same Project. To identify if it is the same WU or not you need to look at the PRCG (Details).
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Top
Ilina
Posts: 4
Joined: Thu Jan 17, 2008 7:39 pm
Location: Montreal, Québec

Re: Project: 6505 (Run 2, Clone 57, Gen 85)

Post by Ilina »

My bad. I forgot to delete the files BEFORE changing the machine ID... And yes, that worked.
Top
Ilina
Posts: 4
Joined: Thu Jan 17, 2008 7:39 pm
Location: Montreal, Québec

Re: Project: 6505 (Run 2, Clone 57, Gen 85)

Post by Ilina »

This unit is messing with me ! Even if I change my ID, I'm getthing that unit right after the new one! I did take a break trying to let that unit expire, but I'm guessing it take a bit more than a month.

[EDIT: clarification]
Top
GreyWhiskers
Posts: 660
Joined: Mon Oct 25, 2010 5:57 am
Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 2600K@4.2 GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers

b) 2004 HP a475c desktop, 1 core Pent 4 HT@3.2 GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only

c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß
Location: Saratoga, California USA

Project: 6505 (Run 2, Clone 57, Gen 85)

Post by GreyWhiskers »

Note: I'm still running v7.1.21 on my uniprocessor laptop that this report is from.

Odd sequence for several reasons:

1. The PRCG is old - I was surprised to see there already was a thread for this exact WU from Dec 2010, with a note from Jan 2011.
2. After normal v7 download of this WU at 99% of the previous WU, and start of this WU at the finish of the previous, it went into four "Gromacs error -- UNKNOWN ERROR" loops
3. It wasn't an immediate error - there are 6 seconds between "Entering MD" and the "UNKNOWN ERROR"
4. Reported the "Too many errors" message. There have been several other references to this error in the forum
5. Reported the "Work server too old for fail report". This has been reported before - latest report on 21 April. One of my own forum posts on a totally unrelated issue from 7 April on starting multiple FAH Console and Clients included this message in its log
6. Reported the "FahCore type in core package seems to be in wrong byte order" error - this also has hit the forum several times, mostly it seems in relation to the multiple GPU issues
7. After this sequence, terminating with attempting to load a new core 78, it started the "Project: 6508 (Run 2, Clone 240, Gen 94)", and is happily folding at 36% :biggrin:

The old laptop has been pretty stable. The error occurred at 4:27am local time when no one was on it and the room was pretty cool - low to mid 60s (deg F). I haven't seen any thermal problems - with my laptop cooler, the CPU temp runs 70-78 deg C.

I can't see anything actionable on my own part right now - should I be doing something?

11:19:39:Unit 00:Entering M.D.
11:19:45:Unit 00:Gromacs error.
11:19:45:Unit 00:
11:19:45:Unit 00:Folding@home Core Shutdown: UNKNOWN_ERROR
11:19:45:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
.....
11:20:03:Unit 00:Entering M.D.
11:20:09:Unit 00:Gromacs error.
11:20:09:Unit 00:Gromacs error.
11:20:09:Unit 00:
11:20:09:Unit 00:Folding@home Core Shutdown: UNKNOWN_ERROR
11:20:09:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
.....
11:21:03:Unit 00:Entering M.D.
11:21:09:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:22:22:Starting Unit 00
........
11:25:19:Unit 00:Entering M.D.
11:25:25:Unit 00:Gromacs error.
11:25:25:Unit 00:
11:25:25:Unit 00:Folding@home Core Shutdown: UNKNOWN_ERROR
11:25:26:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:25:26:WARNING: Unit 00 Too many errors, failing
11:25:27:Sending unit results: id:00 state:SEND project:6505 run:2 clone:57 gen:85 core:0x78 unit:0x196ad5c54dce63420055003900021969
11:25:27:WARNING: Work server too old for fail report, dumping
11:25:27:Cleaning up Unit 00
11:25:28:Connecting to assign3.stanford.edu:8080
11:25:29:News: Welcome to Folding@Home
11:25:29:Assigned to work server 171.64.65.62
11:25:29:Requesting new work unit for slot 00: READY uniprocessor from 171.64.65.62
11:25:29:Connecting to 171.64.65.62:8080
11:25:30:Slot 00: Downloading 467.30KiB
11:25:31:Slot 00: Download complete
11:25:31:Received Unit: id:00 state:DOWNLOAD project:6508 run:2 clone:240 gen:94 core:0x78 unit:0x0b3082f04dce66ab005e00f00002196c
11:27:04:Downloading core from http://www.stanford.edu/~pande/Win32/x86/Core_78.fah
11:27:04:Connecting to http://www.stanford.edu:80
11:27:04:WARNING: FahCore type in core package seems to be in wrong byte order.
11:27:04:FahCore 78: Downloading 805.62KiB
11:27:05:FahCore 78: Download complete
11:27:05:Valid core signature
11:27:05:WARNING: FahCore has not changed since last download, aborting core update
11:27:05:Starting Unit 00
11:27:05:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_ ... ore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:27:05:Started core on PID 2608
11:27:05:FahCore 0x78 started

Code: Select all

*********************** Log Started 10/May/2011-15:47:15 ***********************
15:47:15:************************* Folding@home Client *************************
15:47:15:      Website: http://folding.stanford.edu/
15:47:15:    Copyright: (c) 2009,2010 Stanford University
15:47:15:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
15:47:15:         Args: --lifeline 3864
15:47:15:       Config: C:/Documents and Settings/Admin/Application
15:47:15:               Data/FAHClient/config.xml
15:47:15:******************************** Build ********************************
15:47:15:      Version: 7.1.21
15:47:15:         Date: Mar 23 2011
15:47:15:         Time: 15:13:48
15:47:15:      SVN Rev: 2883
15:47:15:       Branch: fah/trunk/client
15:47:15:     Compiler: Intel(R) C++ MSVC 1500 mode 1110
15:47:15:      Options: /TP /nologo /EHa /wd4297 /wd4103 /wd1786 /Ox -arch:SSE
15:47:15:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qrestrict /MT
15:47:15:     Platform: win32 XP
15:47:15:         Bits: 32
15:47:15:         Mode: Release
15:47:15:******************************* System ********************************
15:47:15:           OS: Microsoft Windows XP Home Edition
15:47:15:          CPU: Intel(R) Pentium(R) M processor 1.73GHz
15:47:15:       CPU ID: GenuineIntel Family 6 Model 13 Stepping 8
15:47:15:         CPUs: 1
15:47:15:       Memory: 1.99GiB
15:47:15:  Free Memory: 1.17GiB
15:47:15:      Threads: WINDOWS_THREADS
15:47:15:         GPUs: 0
15:47:15:         CUDA: Not detected
15:47:15:   On Battery: false
15:47:15:   UTC offset: -7
15:47:15:          PID: 2576
15:47:15:          CWD: C:/Documents and Settings/Admin/Application Data/FAHClient
15:47:15:Win32 Service: false
15:47:15:***********************************************************************
15:47:15:<config>
15:47:15:  <service-description v='Folding@home Client'/>
15:47:15:  <service-restart v='true'/>
15:47:15:  <service-restart-delay v='5000'/>
15:47:15:
15:47:15:  <!-- Client Control -->
15:47:15:  <cycle-rate v='4'/>
15:47:15:  <cycles v='-1'/>
15:47:15:  <data-directory v='.'/>
15:47:15:  <exec-directory v='C:\Program Files\FAHClient'/>
15:47:15:  <exit-when-done v='false'/>
15:47:15:  <max-delay v='21600'/>
15:47:15:  <min-delay v='60'/>
15:47:15:  <threads v='4'/>
15:47:15:
15:47:15:  <!-- Configuration -->
15:47:15:  <config-rotate v='true'/>
15:47:15:  <config-rotate-dir v='configs'/>
15:47:15:  <config-rotate-max v='16'/>
15:47:15:
15:47:15:  <!-- Debugging -->
15:47:15:  <assignment-servers>
15:47:15:    assign3.stanford.edu:8080 assign4.stanford.edu:80
15:47:15:  </assignment-servers>
15:47:15:  <capture-directory v='capture'/>
15:47:15:  <capture-sockets v='false'/>
15:47:15:  <debug-sockets v='false'/>
15:47:15:  <exception-locations v='true'/>
15:47:15:  <gpu-assignment-servers>
15:47:15:    assign-GPU.stanford.edu:80 assign-GPU.stanford.edu:8080
15:47:15:  </gpu-assignment-servers>
15:47:15:  <stack-traces v='false'/>
15:47:15:
15:47:15:  <!-- Error Handling -->
15:47:15:  <max-slot-errors v='5'/>
15:47:15:  <max-unit-errors v='5'/>
15:47:15:
15:47:15:  <!-- FahCore Control -->
15:47:15:  <checkpoint v='15'/>
15:47:15:  <core-dir v='cores'/>
15:47:15:  <core-priority v='idle'/>
15:47:15:  <cpu-affinity v='false'/>
15:47:15:  <cpu-usage v='100'/>
15:47:15:  <no-assembly v='false'/>
15:47:15:
15:47:15:  <!-- Folding Slot Configuration -->
15:47:15:  <client-subtype v='STDCLI'/>
15:47:15:  <client-type v='normal'/>
15:47:15:  <cpu-species v='X86_PENTIUM_II'/>
15:47:15:  <cpu-type v='X86'/>
15:47:15:  <cpus v='1'/>
15:47:15:  <extra-core-args v='-forceasm'/>
15:47:15:  <gpu v='false'/>
15:47:15:  <gpu-id v='0'/>
15:47:15:  <max-packet-size v='normal'/>
15:47:15:  <os-species v='WIN_XP'/>
15:47:15:  <os-type v='WIN32'/>
15:47:15:  <project-key v='0'/>
15:47:15:  <smp v='false'/>
15:47:15:
15:47:15:  <!-- Logging -->
15:47:15:  <log v='log.txt'/>
15:47:15:  <log-color v='false'/>
15:47:15:  <log-crlf v='true'/>
15:47:15:  <log-date v='false'/>
15:47:15:  <log-debug v='true'/>
15:47:15:  <log-domain v='false'/>
15:47:15:  <log-header v='true'/>
15:47:15:  <log-level v='true'/>
15:47:15:  <log-no-info-header v='true'/>
15:47:15:  <log-redirect v='false'/>
15:47:15:  <log-rotate v='true'/>
15:47:15:  <log-rotate-dir v='logs'/>
15:47:15:  <log-rotate-max v='16'/>
15:47:15:  <log-short-level v='false'/>
15:47:15:  <log-simple-domains v='true'/>
15:47:15:  <log-thread-id v='false'/>
15:47:15:  <log-time v='true'/>
15:47:15:  <log-to-screen v='true'/>
15:47:15:  <log-truncate v='false'/>
15:47:15:  <verbosity v='5'/>
15:47:15:
15:47:15:  <!-- Process Control -->
15:47:15:  <child v='false'/>
15:47:15:  <daemon v='false'/>
15:47:15:  <pid v='false'/>
15:47:15:  <pid-file v='Folding@home Client.pid'/>
15:47:15:  <respawn v='false'/>
15:47:15:  <service v='false'/>
15:47:15:
15:47:15:  <!-- Remote Command Server -->
15:47:15:  <command-address v='0.0.0.0'/>
15:47:15:  <command-allow v='127.0.0.1'/>
15:47:15:  <command-allow-no-pass v='127.0.0.1'/>
15:47:15:  <command-deny v='0.0.0.0/0'/>
15:47:15:  <command-deny-no-pass v='0.0.0.0/0'/>
15:47:15:  <command-port v='36330'/>
15:47:15:  <password v=''/>
15:47:15:
15:47:15:  <!-- Slot Control -->
15:47:15:  <max-shutdown-wait v='60'/>
15:47:15:  <pause-on-battery v='true'/>
15:47:15:  <pause-on-start v='false'/>
15:47:15:
15:47:15:  <!-- User Information -->
15:47:15:  <machine-id v='0'/>
15:47:15:  <passkey v='********************************'/>
15:47:15:  <team v='0'/>
15:47:15:  <user v='GreyWhiskers'/>
15:47:15:
15:47:15:  <!-- Work Unit Control -->
15:47:15:  <dump-after-deadline v='true'/>
15:47:15:  <max-queue v='16'/>
15:47:15:  <max-units v='0'/>
15:47:15:  <next-unit-percentage v='99'/>
15:47:15:
15:47:15:  <!-- Folding Slots -->
15:47:15:  <slot id='0' type='UNIPROCESSOR'>
15:47:15:    <client-type v='advanced'/>
15:47:15:  </slot>
15:47:15:</config>

SNIP

19:37:29:Saving configuration to config.xml
19:37:29:<config>
19:37:29:  <!-- Folding Slot Configuration -->
19:37:29:  <extra-core-args v='-forceasm'/>
19:37:29:  <smp v='false'/>
19:37:29:
19:37:29:  <!-- Logging -->
19:37:29:  <verbosity v='4'/>
19:37:29:
19:37:29:  <!-- Remote Command Server -->
19:37:29:  <password v=''/>
19:37:29:
19:37:29:  <!-- Slot Control -->
19:37:29:  <pause-on-battery v='true'/>
19:37:29:
19:37:29:  <!-- User Information -->
19:37:29:  <passkey v='********************************'/>
19:37:29:  <user v='GreyWhiskers'/>
19:37:29:
19:37:29:  <!-- Folding Slots -->
19:37:29:  <slot id='0' type='UNIPROCESSOR'>
19:37:29:    <client-type v='advanced'/>
19:37:29:  </slot>
19:37:29:</config>

SNIP

11:03:22:Unit 01:Writing local files
11:03:22:Unit 01:Completed 245000 out of 250000 steps  (98%)
11:10:56:Unit 01:Writing local files
11:10:56:Unit 01:Completed 247500 out of 250000 steps  (99%)
11:10:56:Connecting to assign3.stanford.edu:8080
11:10:56:News: Welcome to Folding@Home
11:10:56:Assigned to work server 171.64.65.62
11:10:56:Requesting new work unit for slot 00: RUNNING uniprocessor from 171.64.65.62
11:10:56:Connecting to 171.64.65.62:8080
11:10:57:Slot 00: Downloading 495.18KiB
11:10:57:Slot 00: Download complete
11:10:57:Received Unit: id:00 state:DOWNLOAD project:6505 run:2 clone:57 gen:85 core:0x78 unit:0x196ad5c54dce63420055003900021969
11:18:31:Unit 01:Writing local files
11:18:31:Unit 01:Completed 250000 out of 250000 steps  (100%)
11:18:31:Unit 01:Writing final coordinates.
11:18:32:Unit 01:Past main M.D. loop
11:19:32:Unit 01:
11:19:32:Unit 01:Finished Work Unit:
11:19:32:Unit 01:- Reading up to 322680 from "01/wudata_01.arc": Read 322680
11:19:32:Unit 01:- Reading up to 152548 from "01/wudata_01.xtc": Read 152548
11:19:32:Unit 01:goefile size: 0
11:19:32:Unit 01:logfile size: 59474
11:19:32:Unit 01:Leaving Run
11:19:37:Unit 01:- Writing 602698 bytes of core data to disk...
11:19:37:Unit 01:Done: 602186 -> 512379 (compressed to 85.0 percent)
11:19:37:Unit 01:  ... Done.
11:19:37:Unit 01:- Shutting down core
11:19:37:Unit 01:
11:19:37:Unit 01:Folding@home Core Shutdown: FINISHED_UNIT
11:19:37:FahCore running Unit 01 returned: FINISHED_UNIT (100)
11:19:38:Sending unit results: id:01 state:SEND project:6500 run:15 clone:141 gen:88 core:0x78 unit:0x354007bf4dcda99c0058008d000f1964
11:19:38:Starting Unit 00
11:19:38:Unit 01: Uploading 500.87KiB
11:19:38:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:19:38:Connecting to 171.64.65.62:8080
11:19:38:Started core on PID 5476
11:19:38:FahCore 0x78 started
11:19:38:Unit 00:
11:19:38:Unit 00:*------------------------------*
11:19:38:Unit 00:Folding@Home Gromacs Core
11:19:38:Unit 00:Version 1.90 (March 8, 2006)
11:19:38:Unit 00:
11:19:38:Unit 00:Preparing to commence simulation
11:19:38:Unit 00:- Assembly optimizations manually forced on.
11:19:38:Unit 00:- Not checking prior termination.
11:19:38:Unit 00:- Expanded 506550 -> 2495429 (decompressed 492.6 percent)
11:19:38:Unit 00:- Starting from initial work packet
11:19:39:Unit 00:
11:19:39:Unit 00:Project: 6505 (Run 2, Clone 57, Gen 85)
11:19:39:Unit 00:
11:19:39:Unit 00:Assembly optimizations on if available.
11:19:39:Unit 00:Entering M.D.
11:19:40:Unit 01: Upload complete
11:19:40:Server responded WORK_ACK (400)
11:19:40:Cleaning up Unit 01
11:19:45:Unit 00:Gromacs error.
11:19:45:Unit 00:
11:19:45:Unit 00:Folding@home Core Shutdown: UNKNOWN_ERROR
11:19:45:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:19:45:Starting Unit 00
11:19:45:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:19:45:Started core on PID 5236
11:19:45:FahCore 0x78 started
11:19:46:Unit 00:
11:19:46:Unit 00:*------------------------------*
11:19:46:Unit 00:Folding@Home Gromacs Core
11:19:46:Unit 00:Version 1.90 (March 8, 2006)
11:19:46:Unit 00:
11:19:46:Unit 00:Preparing to commence simulation
11:19:46:Unit 00:- Ensuring status. Please wait.
11:20:02:Unit 00:- Assembly optimizations manually forced on.
11:20:02:Unit 00:- Not checking prior termination.
11:20:03:Unit 00:- Expanded 506550 -> 2495429 (decompressed 492.6 percent)
11:20:03:Unit 00:- Starting from initial work packet
11:20:03:Unit 00:
11:20:03:Unit 00:Project: 6505 (Run 2, Clone 57, Gen 85)
11:20:03:Unit 00:
11:20:03:Unit 00:Assembly optimizations on if available.
11:20:03:Unit 00:Entering M.D.
11:20:09:Unit 00:Gromacs error.
11:20:09:Unit 00:
11:20:09:Unit 00:Folding@home Core Shutdown: UNKNOWN_ERROR
11:20:09:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:20:45:Starting Unit 00
11:20:45:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:20:45:Started core on PID 1296
11:20:45:FahCore 0x78 started
11:20:46:Unit 00:
11:20:46:Unit 00:*------------------------------*
11:20:46:Unit 00:Folding@Home Gromacs Core
11:20:46:Unit 00:Version 1.90 (March 8, 2006)
11:20:46:Unit 00:
11:20:46:Unit 00:Preparing to commence simulation
11:20:46:Unit 00:- Ensuring status. Please wait.
11:21:03:Unit 00:- Assembly optimizations manually forced on.
11:21:03:Unit 00:- Not checking prior termination.
11:21:03:Unit 00:- Expanded 506550 -> 2495429 (decompressed 492.6 percent)
11:21:03:Unit 00:- Starting from initial work packet
11:21:03:Unit 00:
11:21:03:Unit 00:Project: 6505 (Run 2, Clone 57, Gen 85)
11:21:03:Unit 00:
11:21:03:Unit 00:Assembly optimizations on if available.
11:21:03:Unit 00:Entering M.D.
11:21:09:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:22:22:Starting Unit 00
11:22:22:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:22:23:Started core on PID 5416
11:22:23:FahCore 0x78 started
11:22:23:Unit 00:
11:22:23:Unit 00:*------------------------------*
11:22:23:Unit 00:Folding@Home Gromacs Core
11:22:23:Unit 00:Version 1.90 (March 8, 2006)
11:22:23:Unit 00:
11:22:23:Unit 00:Preparing to commence simulation
11:22:23:Unit 00:- Ensuring status. Please wait.
11:22:40:Unit 00:- Assembly optimizations manually forced on.
11:22:40:Unit 00:- Not checking prior termination.
11:22:40:Unit 00:- Expanded 506550 -> 2495429 (decompressed 492.6 percent)
11:22:40:Unit 00:- Starting from initial work packet
11:22:40:Unit 00:
11:22:40:Unit 00:Project: 6505 (Run 2, Clone 57, Gen 85)
11:22:40:Unit 00:
11:22:40:Unit 00:Assembly optimizations on if available.
11:22:40:Unit 00:Entering M.D.
11:22:46:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:25:00:Starting Unit 00
11:25:00:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:25:00:Started core on PID 1416
11:25:00:FahCore 0x78 started
11:25:01:Unit 00:
11:25:01:Unit 00:*------------------------------*
11:25:01:Unit 00:Folding@Home Gromacs Core
11:25:01:Unit 00:Version 1.90 (March 8, 2006)
11:25:01:Unit 00:
11:25:01:Unit 00:Preparing to commence simulation
11:25:01:Unit 00:- Ensuring status. Please wait.
11:25:18:Unit 00:- Assembly optimizations manually forced on.
11:25:18:Unit 00:- Not checking prior termination.
11:25:18:Unit 00:- Expanded 506550 -> 2495429 (decompressed 492.6 percent)
11:25:18:Unit 00:- Starting from initial work packet
11:25:19:Unit 00:
11:25:19:Unit 00:Project: 6505 (Run 2, Clone 57, Gen 85)
11:25:19:Unit 00:
11:25:19:Unit 00:Assembly optimizations on if available.
11:25:19:Unit 00:Entering M.D.
11:25:25:Unit 00:Gromacs error.
11:25:25:Unit 00:
11:25:25:Unit 00:Folding@home Core Shutdown: UNKNOWN_ERROR
11:25:26:FahCore running Unit 00 returned: UNKNOWN_ERROR (121)
11:25:26:WARNING: Unit 00 Too many errors, failing
11:25:27:Sending unit results: id:00 state:SEND project:6505 run:2 clone:57 gen:85 core:0x78 unit:0x196ad5c54dce63420055003900021969
11:25:27:WARNING: Work server too old for fail report, dumping
11:25:27:Cleaning up Unit 00
11:25:28:Connecting to assign3.stanford.edu:8080
11:25:29:News: Welcome to Folding@Home
11:25:29:Assigned to work server 171.64.65.62
11:25:29:Requesting new work unit for slot 00: READY uniprocessor from 171.64.65.62
11:25:29:Connecting to 171.64.65.62:8080
11:25:30:Slot 00: Downloading 467.30KiB
11:25:31:Slot 00: Download complete
11:25:31:Received Unit: id:00 state:DOWNLOAD project:6508 run:2 clone:240 gen:94 core:0x78 unit:0x0b3082f04dce66ab005e00f00002196c
11:27:04:Downloading core from http://www.stanford.edu/~pande/Win32/x86/Core_78.fah
11:27:04:Connecting to www.stanford.edu:80
11:27:04:WARNING: FahCore type in core package seems to be in wrong byte order.
11:27:04:FahCore 78: Downloading 805.62KiB
11:27:05:FahCore 78: Download complete
11:27:05:Valid core signature
11:27:05:WARNING: FahCore has not changed since last download, aborting core update
11:27:05:Starting Unit 00
11:27:05:Running core: "C:/Documents and Settings/Admin/Application Data/FAHClient/cores/www.stanford.edu/~pande/Win32/x86/Core_78.fah/FahCore_78.exe" -dir 00 -suffix 01 -lifeline 2576 -version 701 -checkpoint 15 -forceasm
11:27:05:Started core on PID 2608
11:27:05:FahCore 0x78 started
11:27:06:Unit 00:
11:27:06:Unit 00:*------------------------------*
11:27:06:Unit 00:Folding@Home Gromacs Core
11:27:06:Unit 00:Version 1.90 (March 8, 2006)
11:27:06:Unit 00:
11:27:06:Unit 00:Preparing to commence simulation
11:27:06:Unit 00:- Assembly optimizations manually forced on.
11:27:06:Unit 00:- Not checking prior termination.
11:27:06:Unit 00:- Expanded 478005 -> 2355081 (decompressed 492.6 percent)
11:27:06:Unit 00:- Starting from initial work packet
11:27:06:Unit 00:
11:27:06:Unit 00:Project: 6508 (Run 2, Clone 240, Gen 94)
11:27:06:Unit 00:
11:27:07:Unit 00:Assembly optimizations on if available.
11:27:07:Unit 00:Entering M.D.
11:27:13:Unit 00:Protein: proG_3 in water
11:27:13:Unit 00:
11:27:13:Unit 00:Writing local files
11:27:13:Unit 00:Extra SSE boost OK.
11:27:14:Unit 00:Writing local files
11:27:15:Unit 00:Completed 0 out of 250000 steps  (0%)
11:37:43:Unit 00:Writing local files
11:37:43:Unit 00:Completed 2500 out of 250000 steps  (1%)
11:46:55:Unit 00:Writing local files
11:46:55:Unit 00:Completed 5000 out of 250000 steps  (2%)
11:55:55:Unit 00:Writing local files
11:55:55:Unit 00:Completed 7500 out of 250000 steps  (3%)
12:04:58:Unit 00:Writing local files
12:04:58:Unit 00:Completed 10000 out of 250000 steps  (4%)
12:13:59:Unit 00:Writing local files
12:13:59:Unit 00:Completed 12500 out of 250000 steps  (5%)
12:23:01:Unit 00:Writing local files
12:23:01:Unit 00:Completed 15000 out of 250000 steps  (6%)
12:32:03:Unit 00:Writing local files
12:32:03:Unit 00:Completed 17500 out of 250000 steps  (7%)
12:41:03:Unit 00:Writing local files
12:41:03:Unit 00:Completed 20000 out of 250000 steps  (8%)
12:50:05:Unit 00:Writing local files
12:50:05:Unit 00:Completed 22500 out of 250000 steps  (9%)
12:59:05:Unit 00:Writing local files
12:59:05:Unit 00:Completed 25000 out of 250000 steps  (10%)
13:08:08:Unit 00:Writing local files
13:08:08:Unit 00:Completed 27500 out of 250000 steps  (11%)
13:17:11:Unit 00:Writing local files
13:17:11:Unit 00:Completed 30000 out of 250000 steps  (12%)
13:26:11:Unit 00:Writing local files
13:26:11:Unit 00:Completed 32500 out of 250000 steps  (13%)
13:35:13:Unit 00:Writing local files
13:35:13:Unit 00:Completed 35000 out of 250000 steps  (14%)
13:44:15:Unit 00:Writing local files
13:44:15:Unit 00:Completed 37500 out of 250000 steps  (15%)
13:53:17:Unit 00:Writing local files
13:53:17:Unit 00:Completed 40000 out of 250000 steps  (16%)
14:02:19:Unit 00:Writing local files
14:02:19:Unit 00:Completed 42500 out of 250000 steps  (17%)
14:11:20:Unit 00:Writing local files
14:11:20:Unit 00:Completed 45000 out of 250000 steps  (18%)
14:20:22:Unit 00:Writing local files
14:20:22:Unit 00:Completed 47500 out of 250000 steps  (19%)
14:29:22:Unit 00:Writing local files
14:29:22:Unit 00:Completed 50000 out of 250000 steps  (20%)
14:38:23:Unit 00:Writing local files
14:38:23:Unit 00:Completed 52500 out of 250000 steps  (21%)
14:47:31:Unit 00:Writing local files
14:47:31:Unit 00:Completed 55000 out of 250000 steps  (22%)
14:56:55:Unit 00:Writing local files
14:56:55:Unit 00:Completed 57500 out of 250000 steps  (23%)
15:06:19:Unit 00:Writing local files
15:06:19:Unit 00:Completed 60000 out of 250000 steps  (24%)
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: Project: 6505 (Run 2, Clone 57, Gen 85) [Updated]

Post by 7im »

Please always run the newest version unless there is a serious problem with that version.

So many things change so quickly from one version to the next... and if I reported a bug that had been fixed in the newest version, I would look kinda silly in the eyes of the developers. ;)
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Contact PantherX

Re: Project: 6505 (Run 2, Clone 57, Gen 85)

Post by PantherX »

GreyWhiskers wrote:...6. Reported the "FahCore type in core package seems to be in wrong byte order" error - this also has hit the forum several times, mostly it seems in relation to the multiple GPU issues...
...
11:27:04:WARNING: FahCore type in core package seems to be in wrong byte order.
11:27:04:FahCore 78: Downloading 805.62KiB
11:27:05:FahCore 78: Download complete
11:27:05:Valid core signature
11:27:05:WARNING: FahCore has not changed since last download, aborting core update
...
...
That error message is a cosmetic one. The reason is that the FahCores was compiled with v6 Client in mind. The V7 handles the FahCores in a different manner. However, once the FahCores are compiled with V7 in mind, this error will go away automatically. Do note that there isn't anything wrong with the FahCore or WU processing, just a way of saying "This FahCore follows the v6 standard instead of V7".
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Top
Post Reply

Return to “Issues with a specific WU”