Project: 6053 (Run 1, Clone 198, Gen 21)

[PantherX]

A teammate can fold bigadv WUs without any issue but a normal one caused problems:

Code: Select all

[23:16:56]
[23:16:56] Work directory not found. Creating...
[23:16:56] Could not open work queue, generating new queue...
[23:16:56] - Autosending finished units... [September 12 23:16:56 UTC]
[23:16:56] - Preparing to get new work unit...
[23:16:56] Trying to send all finished work units
[23:16:56] + No unsent completed units remaining.
[23:16:56] - Autosend completed
[23:16:56] Cleaning up work directory
[23:16:56] + Attempting to get work packet
[23:16:56] Passkey found
[23:16:56] - Will indicate memory of 6142 MB
[23:16:56] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 12, Stepping: 2
[23:16:56] - Connecting to assignment server
[23:16:56] Connecting to http://assign.stanford.edu:8080/
[23:16:57] Posted data.
[23:16:57] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[23:16:57] + News From Folding@Home: Welcome to Folding@Home
[23:16:57] Loaded queue successfully.
[23:16:57] Sent data
[23:16:57] Connecting to http://171.64.65.54:8080/
[23:16:59] Posted data.
[23:16:59] Initial: 0000; - Receiving payload (expected size: 1767082)
[23:17:04] - Downloaded at ~345 kB/s
[23:17:04] - Averaged speed for that direction ~345 kB/s
[23:17:04] + Received work.
[23:17:04] + Closed connections
[23:17:04]
[23:17:04] + Processing work unit
[23:17:04] Core required: FahCore_a3.exe
[23:17:04] Core found.
[23:17:04] Working on queue slot 01 [September 12 23:17:04 UTC]
[23:17:04] + Working ...
[23:17:04] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 01 -np 11 -checkpoint 3 -verbose -lifeline 4116 -version 630'

[23:17:04]
[23:17:04] *------------------------------*
[23:17:04] Folding@Home Gromacs SMP Core
[23:17:04] Version 2.22 (Mar 12, 2010)
[23:17:04]
[23:17:04] Preparing to commence simulation
[23:17:04] - Looking at optimizations...
[23:17:04] - Created dyn
[23:17:04] - Files status OK
[23:17:04] - Expanded 1766570 -> 2253729 (decompressed 127.5 percent)
[23:17:04] Called DecompressByteArray: compressed_data_size=1766570 data_size=2253729, decompressed_data_size=2253729 diff=0
[23:17:04] - Digital signature verified
[23:17:04]
[23:17:04] Project: 6053 (Run 1, Clone 198, Gen 21)
[23:17:04]
[23:17:04] Assembly optimizations on if available.
[23:17:04] Entering M.D.
[23:17:10] mdrun returned 255
[23:17:10] Going to send back what have done -- stepsTotalG=500000
[23:17:10] Work fraction=0.0000 steps=500000.
[23:17:14] logfile size=0 infoLength=0 edr=0 trr=25
[23:17:14] logfile size: 0 info=0 bed=0 hdr=25
[23:17:14] - Writing 642 bytes of core data to disk...
[23:17:14] ... Done.
[23:17:15]
[23:17:15] Folding@home Core Shutdown: EARLY_UNIT_END
[23:17:17] Killing all core threads
[23:17:17] Could not get process id information. Please kill core process manually

Folding@Home Client Shutdown at user request.
[23:17:17] ***** Got a SIGTERM signal (2)
[23:17:17] Killing all core threads
[23:17:17] Could not get process id information. Please kill core process manually

Folding@Home Client Shutdown.

Hope that it is a bad WU.

[sortofageek]

Two people have had trouble with that one so far, one of them apparently several times. We probably still need to see a report from at least one other folder before calling it good or bad, though.

Thanks for reporting this.

[PantherX]

My teammate told me that he encountered a series of EUE and that he has already complete lots of normal a3 WUs and is currently folding a bigadv without any problem.
Project: 6077 (Run 0, Clone 163, Gen 64)
Project: 6041 (Run 0, Clone 293, Gen 36)
Project: 6069 (Run 0, Clone 131, Gen 115)
FAHlog for the EUEs part:

Code: Select all

[22:34:29] Project: 6077 (Run 0, Clone 163, Gen 64)
[22:34:29]
[22:34:29] Assembly optimizations on if available.
[22:34:29] Entering M.D.
[22:34:35] mdrun returned 255
[22:34:35] Going to send back what have done -- stepsTotalG=500000
[22:34:35] Work fraction=0.0000 steps=500000.
[22:34:39] logfile size=0 infoLength=0 edr=0 trr=25
[22:34:39] logfile size: 0 info=0 bed=0 hdr=25
[22:34:39] - Writing 642 bytes of core data to disk...
[22:34:39] ... Done.
[22:34:39]
[22:34:39] Folding@home Core Shutdown: EARLY_UNIT_END
[22:34:43] CoreStatus = 72 (114)
[22:34:43] Sending work to server
[22:34:43] Project: 6077 (Run 0, Clone 163, Gen 64)


[22:35:31] Project: 6041 (Run 0, Clone 293, Gen 36)
[22:35:31]
[22:35:31] Assembly optimizations on if available.
[22:35:31] Entering M.D.
[22:35:37] mdrun returned 255
[22:35:37] Going to send back what have done -- stepsTotalG=250000
[22:35:37] Work fraction=0.0000 steps=250000.
[22:35:42] logfile size=0 infoLength=0 edr=0 trr=25
[22:35:42] logfile size: 0 info=0 bed=0 hdr=25
[22:35:42] - Writing 642 bytes of core data to disk...
[22:35:42] ... Done.
[22:35:42]
[22:35:42] Folding@home Core Shutdown: EARLY_UNIT_END
[22:35:46] CoreStatus = 72 (114)
[22:35:46] Sending work to server
[22:35:46] Project: 6041 (Run 0, Clone 293, Gen 36)


[22:37:04] Project: 6069 (Run 0, Clone 131, Gen 115)
[22:37:04]
[22:37:04] Assembly optimizations on if available.
[22:37:04] Entering M.D.
[22:37:10] mdrun returned 255
[22:37:10] Going to send back what have done -- stepsTotalG=500000
[22:37:10] Work fraction=0.0000 steps=500000.
[22:37:14] logfile size=0 infoLength=0 edr=0 trr=25
[22:37:14] logfile size: 0 info=0 bed=0 hdr=25
[22:37:14] - Writing 642 bytes of core data to disk...
[22:37:14] ... Done.
[22:37:14]
[22:37:14] Folding@home Core Shutdown: EARLY_UNIT_END
[22:37:18] CoreStatus = 72 (114)
[22:37:18] Sending work to server
[22:37:18] Project: 6069 (Run 0, Clone 131, Gen 115)


[22:37:18] + Attempting to send results [September 10 22:37:18 UTC]
[22:37:18] - Reading file work/wuresults_05.dat from core
[22:37:18] (Read 642 bytes from disk)
[22:37:18] Connecting to http://171.64.65.54:8080/
[22:37:19] Posted data.
[22:37:19] Initial: 0000; - Uploaded at ~1 kB/s
[22:37:19] - Averaged speed for that direction ~33 kB/s
[22:37:19] + Results successfully sent
[22:37:19] Thank you for your contribution to Folding@Home.
[22:37:22] Killing all core threads
[22:37:22] Could not get process id information. Please kill core process manually

[bruce]

Project: 6077 (Run 0, Clone 163, Gen 64) iancook221188 had an EUE but someone else finished it.
Project: 6041 (Run 0, Clone 293, Gen 36) iancook221188 had an EUE but someone else finished it.
Project: 6069 (Run 0, Clone 131, Gen 115) iancook221188 and one other person had EUEs but someone else finished it.

[iancook221188]

thank for helping bruce i think the only thing that i did different was to delete the unitinfo, queue.dat and the work folder to try and see if it was the work unit but when it happen with lots of different units i started to think it was something else, once it gets a bigadv it fold it fine and like panther said for a few day befor i started bigadv folding i was doing -advmethods im still on stock clock on cpu and mem do you think turbo could be doing it? it only in the low 50c high 40c