171.67.108.20

[toTOW]

It's not the same server ... you are having troubles with 171.67.108.13 and you posted in a thread about 171.67.108.20 ...

[bruce]

There have been a few reports of WU shortages. The News Blog says this will be fixed as the servers are put into production.

I recommend you work with us to figure out why you can't use V6. Some servers have WUs that work on either V5 or V6 and other servers are only for V6 so not being able to find work for your V5 client is going to be a bigger problem than if you could run V6.

Sometimes it takes a lot longer than the log shows to get a new WU.

In some cases, adding (or removing) the -advmethods flag might be helpful.

Be sure your client is configured to accept bigWUs unless you have a strong reason not to.

[ElectricVehicle]

[20:54:58] + Attempting to get work packet
[20:54:58] - Will indicate memory of 12279 MB
[20:54:58] Gpu type=3 species=30.
[20:54:58] - Connecting to assignment server
[20:54:58] Connecting to http://assign-GPU.stanford.edu:8080/
[20:54:58] Posted data.
[20:54:58] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:54:58] + Couldn't get work instructions.
[20:54:58] - Attempt #8 to get work failed, and no other work to do.
Waiting before retry.

Hmmm.. Can't get work! (Must be the economy!!! )

Code: Select all

--- Opening Log file [May 25 19:39:11 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\MikHexa\AppData\Roaming\Folding@home-gpu


[19:39:11] Gpu type=3 species=30.
[19:41:32] - Ask before connecting: No
[19:41:32] - User name: [EV]NissanLeaf (Team 104636)
[19:41:32] - User ID: xxxxxxxxxxxxxxxxxxxxxx
[19:41:32] - Machine ID: 2
[19:41:32] 
[19:41:32] Work directory not found. Creating...
[19:41:32] Could not open work queue, generating new queue...
[19:41:32] Initialization complete
[19:41:32] - Preparing to get new work unit...
[19:41:32] Cleaning up work directory
[19:41:32] - Autosending finished units... [May 25 19:41:32 UTC]
[19:41:32] Trying to send all finished work units
[19:41:32] + No unsent completed units remaining.
[19:41:32] - Autosend completed
[19:41:32] + Attempting to get work packet
[19:41:32] - Will indicate memory of 12279 MB
[19:41:32] Gpu type=3 species=30.
[19:41:32] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 12, Stepping: 2
[19:41:32] - Connecting to assignment server
[19:41:32] Connecting to http://assign-GPU.stanford.edu:8080/
[19:41:32] Posted data.
[19:41:32] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[19:41:32] + News From Folding@Home: Welcome to Folding@Home
[19:41:32] Loaded queue successfully.
[19:41:32] Gpu type=3 species=30.
[19:41:32] Empty passkey
[19:41:32] Connecting to http://171.67.108.20:8080/
[19:41:33] Posted data.
[19:41:33] Initial: 0000; - Receiving payload (expected size: 42232)
[19:41:33] Conversation time very short, giving reduced weight in bandwidth avg
[19:41:33] - Downloaded at ~82 kB/s
[19:41:33] - Averaged speed for that direction ~82 kB/s
[19:41:33] + Received work.
[19:41:33] + Closed connections
[19:41:33] 
[19:41:33] + Processing work unit
[19:41:33] Core required: FahCore_15.exe
[19:41:33] Core found.
[19:41:33] Working on queue slot 01 [May 25 19:41:33 UTC]
[19:41:33] + Working ...
[19:41:33] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -checkpoint 15 -verbose -lifeline 2224 -version 630'

[19:41:33] 
[19:41:33] *------------------------------*
[19:41:33] Folding@Home GPU Core -- Beta
[19:41:33] Version 2.09 (Thu May 20 11:58:42 PDT 2010)
[19:41:33] 
[19:41:33] Build host: SimbiosNvdWin7
[19:41:33] Board Type: Nvidia
[19:41:33] Core      : 
[19:41:33] Preparing to commence simulation
[19:41:33] - Looking at optimizations...
[19:41:33] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[19:41:33] - Created dyn
[19:41:33] - Files status OK
[19:41:33] sizeof(CORE_PACKET_HDR) = 512 file=<>
[19:41:33] - Expanded 41720 -> 163067 (decompressed 390.8 percent)
[19:41:33] Called DecompressByteArray: compressed_data_size=41720 data_size=163067, decompressed_data_size=163067 diff=0
[19:41:33] - Digital signature verified
[19:41:33] 
[19:41:33] Project: 10626 (Run 82, Clone 13, Gen 0)
[19:41:33] 
[19:41:33] Assembly optimizations on if available.
[19:41:33] Entering M.D.
[19:41:39] Tpr hash work/wudata_01.tpr:  2812901548 1770194687 343485951 3123841833 2835386662
[19:41:39] Working on 582 p2750_N68H_AM03
[19:41:39] Client config found, loading data.
[19:41:39] Starting GUI Server
[19:42:16] Completed 1%
[19:42:53] Completed 2%
[19:43:30] Completed 3%
[19:44:06] Completed 4%
[19:44:43] Completed 5%
[19:45:20] Completed 6%
[19:45:57] Completed 7%
[19:46:33] Completed 8%
[19:47:10] Completed 9%
[19:47:47] Completed 10%
[19:48:23] Completed 11%
[19:49:00] Completed 12%
[19:49:37] Completed 13%
[19:50:14] Completed 14%
[19:50:50] Completed 15%
[19:51:27] Completed 16%
[19:52:04] Completed 17%
[19:52:41] Completed 18%
[19:53:17] Completed 19%
[19:53:54] Completed 20%
[19:54:31] Completed 21%
[19:55:07] Completed 22%
[19:55:45] Completed 23%
[19:56:21] Completed 24%
[19:56:58] Completed 25%
[19:57:35] Completed 26%
[19:58:11] Completed 27%
[19:58:48] Completed 28%
[19:59:25] Completed 29%
[20:00:02] Completed 30%
[20:00:38] Completed 31%
[20:01:15] Completed 32%
[20:01:52] Completed 33%
[20:02:28] Completed 34%
[20:03:05] Completed 35%
[20:03:42] Completed 36%
[20:04:19] Completed 37%
[20:04:55] Completed 38%
[20:05:32] Completed 39%
[20:06:09] Completed 40%
[20:06:46] Completed 41%
[20:07:22] Completed 42%
[20:07:59] Completed 43%
[20:08:36] Completed 44%
[20:09:12] Completed 45%
[20:09:49] Completed 46%
[20:10:26] Completed 47%
[20:11:03] Completed 48%
[20:11:39] Completed 49%
[20:12:16] Completed 50%
[20:12:53] Completed 51%
[20:13:30] Completed 52%
[20:14:06] Completed 53%
[20:14:43] Completed 54%
[20:15:20] Completed 55%
[20:15:56] Completed 56%
[20:16:34] Completed 57%
[20:17:10] Completed 58%
[20:17:47] Completed 59%
[20:18:24] Completed 60%
[20:19:00] Completed 61%
[20:19:37] Completed 62%
[20:20:14] Completed 63%
[20:20:51] Completed 64%
[20:21:27] Completed 65%
[20:22:04] Completed 66%
[20:22:41] Completed 67%
[20:23:17] Completed 68%
[20:23:54] Completed 69%
[20:24:31] Completed 70%
[20:25:08] Completed 71%
[20:25:44] Completed 72%
[20:26:21] Completed 73%
[20:26:58] Completed 74%
[20:27:34] Completed 75%
[20:28:11] Completed 76%
[20:28:48] Completed 77%
[20:29:25] Completed 78%
[20:30:01] Completed 79%
[20:30:38] Completed 80%
[20:31:15] Completed 81%
[20:31:51] Completed 82%
[20:32:28] Completed 83%
[20:33:05] Completed 84%
[20:33:42] Completed 85%
[20:34:19] Completed 86%
[20:34:55] Completed 87%
[20:35:32] Completed 88%
[20:36:09] Completed 89%
[20:36:46] Completed 90%
[20:37:23] Completed 91%
[20:37:59] Completed 92%
[20:38:36] Completed 93%
[20:39:13] Completed 94%
[20:39:50] Completed 95%
[20:40:26] Completed 96%
[20:41:03] Completed 97%
[20:41:40] Completed 98%
[20:42:17] Completed 99%
[20:42:53] Completed 100%
[20:42:53] Finished fah_main
[20:42:53] 
[20:42:53] Successful run
[20:42:53] DynamicWrapper: Finished Work Unit: sleep=10000
[20:43:03] Reserved 11340 bytes for xtc file; Cosm status=0
[20:43:03] Allocated 11340 bytes for xtc file
[20:43:03] - Reading up to 11340 from "work/wudata_01.xtc": Read 11340
[20:43:03] Read 11340 bytes from xtc file; available packet space=786419124
[20:43:03] xtc file hash check passed.
[20:43:03] Reserved 3621840 3621840 786419124 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[20:43:03] Allocated 3621840 bytes for arc file
[20:43:03] - Reading up to 3621840 from "work/wudata_01.trr": Read 3621840
[20:43:03] Read 3621840 bytes from arc file; available packet space=782797284
[20:43:03] trr file hash check passed.
[20:43:03] Allocated 544 bytes for edr file
[20:43:03] Read bedfile
[20:43:03] edr file hash check passed.
[20:43:03] Allocated 492610 bytes for logfile
[20:43:03] Read logfile
[20:43:03] GuardedRun: success in DynamicWrapper
[20:43:03] GuardedRun: done
[20:43:03] Run: GuardedRun completed.
[20:43:03] + Opened results file
[20:43:03] - Writing 4126846 bytes of core data to disk...
[20:43:04] Done: 4126334 -> 3097990 (compressed to 75.0 percent)
[20:43:04]   ... Done.
[20:43:04] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[20:43:05] Shutting down core 
[20:43:05] 
[20:43:05] Folding@home Core Shutdown: FINISHED_UNIT
[20:43:07] CoreStatus = 64 (100)
[20:43:07] Unit 1 finished with 98 percent of time to deadline remaining.
[20:43:07] Updated performance fraction: 0.978623
[20:43:07] Sending work to server
[20:43:07] Project: 10626 (Run 82, Clone 13, Gen 0)
[20:43:07] - Read packet limit of 540015616... Set to 524286976.


[20:43:07] + Attempting to send results [May 25 20:43:07 UTC]
[20:43:07] - Reading file work/wuresults_01.dat from core
[20:43:07]   (Read 3098502 bytes from disk)
[20:43:07] Gpu type=3 species=30.
[20:43:07] Connecting to http://171.67.108.20:8080/
[20:43:27] Posted data.
[20:43:27] Initial: 0000; - Uploaded at ~151 kB/s
[20:43:27] - Averaged speed for that direction ~151 kB/s
[20:43:27] + Results successfully sent
[20:43:27] Thank you for your contribution to Folding@Home.
[20:43:27] + Starting local stats count at 1
[20:43:31] Trying to send all finished work units
[20:43:31] + No unsent completed units remaining.
[20:43:31] - Preparing to get new work unit...
[20:43:31] Cleaning up work directory
[20:43:31] + Attempting to get work packet
[20:43:31] - Will indicate memory of 12279 MB
[20:43:31] Gpu type=3 species=30.
[20:43:31] - Connecting to assignment server
[20:43:31] Connecting to http://assign-GPU.stanford.edu:8080/
[20:43:31] Posted data.
[20:43:31] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:43:31] + Couldn't get work instructions.
[20:43:31] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[20:43:36] + Attempting to get work packet
[20:43:36] - Will indicate memory of 12279 MB
[20:43:36] Gpu type=3 species=30.
[20:43:36] - Connecting to assignment server
[20:43:36] Connecting to http://assign-GPU.stanford.edu:8080/
[20:43:40] Posted data.
[20:43:40] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:43:40] + Couldn't get work instructions.
[20:43:40] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[20:43:55] + Attempting to get work packet
[20:43:55] - Will indicate memory of 12279 MB
[20:43:55] Gpu type=3 species=30.
[20:43:55] - Connecting to assignment server
[20:43:55] Connecting to http://assign-GPU.stanford.edu:8080/
[20:43:55] Posted data.
[20:43:55] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:43:55] + Couldn't get work instructions.
[20:43:55] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[20:44:23] + Attempting to get work packet
[20:44:23] - Will indicate memory of 12279 MB
[20:44:23] Gpu type=3 species=30.
[20:44:23] - Connecting to assignment server
[20:44:23] Connecting to http://assign-GPU.stanford.edu:8080/
[20:44:24] Posted data.
[20:44:24] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:44:24] + Couldn't get work instructions.
[20:44:24] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[20:45:17] + Attempting to get work packet
[20:45:17] - Will indicate memory of 12279 MB
[20:45:17] Gpu type=3 species=30.
[20:45:17] - Connecting to assignment server
[20:45:17] Connecting to http://assign-GPU.stanford.edu:8080/
[20:45:17] Posted data.
[20:45:17] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:45:17] + Couldn't get work instructions.
[20:45:17] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[20:46:51] + Attempting to get work packet
[20:46:51] - Will indicate memory of 12279 MB
[20:46:51] Gpu type=3 species=30.
[20:46:51] - Connecting to assignment server
[20:46:51] Connecting to http://assign-GPU.stanford.edu:8080/
[20:46:51] Posted data.
[20:46:51] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:46:51] + Couldn't get work instructions.
[20:46:51] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
[20:49:32] + Attempting to get work packet
[20:49:32] - Will indicate memory of 12279 MB
[20:49:32] Gpu type=3 species=30.
[20:49:32] - Connecting to assignment server
[20:49:32] Connecting to http://assign-GPU.stanford.edu:8080/
[20:49:32] Posted data.
[20:49:32] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:49:32] + Couldn't get work instructions.
[20:49:32] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
[20:54:58] + Attempting to get work packet
[20:54:58] - Will indicate memory of 12279 MB
[20:54:58] Gpu type=3 species=30.
[20:54:58] - Connecting to assignment server
[20:54:58] Connecting to http://assign-GPU.stanford.edu:8080/
[20:54:58] Posted data.
[20:54:58] Initial: 0000; + No appropriate work server was available; will try again in a bit.
[20:54:58] + Couldn't get work instructions.
[20:54:58] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.

[Killers2]

Yeah mine won't get any work either. It's such a hobo

[ElectricVehicle]

Yeah, like Mom and Dad always said - "Get a Job!" (And Dad would add - "And stop drinking all my beer!!")

[RESEYER]

Same here from germany...

[Killers2]

I guess we gobbled up there WU's for the GPU3 beta. Argh give us more work.

If it makes a difference I am from the UK.

Edit: Just got a WU :O

[Sidicas]

Gone already???

I've got three GTX 470s to feed and I haven't even gotten home yet!

[ElectricVehicle]

I just got a WU! WU-Hoooo!

It's 10626, I got it 7 minutes ago. (I got it after I stopped and restarted the client, but I had already done that several times before, so I think that is coincidence since it was in the wait period when I restarted the third or so time.)

[bruce]

Strictly speculating here, but it's possible that Development has intentionally limited the number of WUs available. They have to have time to read the problem reports, look at the results, etc. before deciding if there are any essential fixes that need to be made immediately or whether there's some sense of almost everything being in control.

Suppose there's a serious undiscovered bug. Would you want to be responsible for distributing millions of WUs that just crash and tie up resources? It's just safer to start slow.

From what I understand, those with older hardware can still run the older client -- the new client is only essential for Fermi. Nobody is going to object if the older GPUs keep testing, but likewise nobody is going to object if you switch back to GPU2. When I test something like this, I generally create two clients: one GPU2 and one GPU3 and then manually decide which one I want to run at the moment.

The driver update should not have done any damage to a GPU2 installation. (I didn't see any problem reports in response to the April 24, 2010 Blog report.

As is always the case, the successful upload of a result causes the server to generate a new WU.

[RHN]

Hello all,

I've been waiting for GPU3 as eagerly as anyone, so I installed the client when I found out it had been released, and have been running in on my GT 240 for the last 36 hours or so - in which time I've run around 10-12 GPU2 work units using FahCore_11. I uninstalled the last client, installed the latest Nvidia drivers, then downloaded the top link in Professor Pande's post in the announcements section. Here are pertinent numbers:

Card: GT 240 (512MB GDDR5)
OS: Windows 7 x64 Professional
Drivers: 257.15
F@H-GPU: 6.30r2, released 5/20/2010
Switches: large units allowed, -advmethods, -verbosity 9

I'd love to give running GPU3 work units a shot, unless the GT 240 isn't supported (it's identified in the client as Gpu type 2, species 30). I don't know if I'm doing anything wrong, or if there are just too few of those work units. I'm happy to keep running GPU2 units if that is deemed best, and I don't really care about points. However, I understand that the science will be improved in GPU3, so, if true, I want to get on it!

Thanks,
Ryan

[ElectricVehicle]

Posting part or all of your log around the error really helps. I can't get WU's right now either, for over the last hour, since [15:07:15] (8:07 am PDT). Looks like the work server is having some issues:

[15:50:47] + Attempting to get work packet
[15:50:47] - Will indicate memory of 12279 MB
[15:50:47] Gpu type=3 species=30.
[15:50:47] - Connecting to assignment server
[15:50:47] Connecting to http://assign-GPU.stanford.edu:8080/
[15:50:48] Posted data.
[15:50:48] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:50:48] + News From Folding@Home: Welcome to Folding@Home
[15:50:48] Loaded queue successfully.
[15:50:48] Gpu type=3 species=30.
[15:50:48] Empty passkey
[15:50:48] Connecting to http://171.67.108.20:8080/
[15:50:48] - Couldn't send HTTP request to server
[15:50:48] + Could not connect to Work Server
[15:50:48] - Attempt #10 to get work failed, and no other work to do.
Waiting before retry.

Code: Select all

[15:05:05] Completed 98%
[15:05:41] Completed 99%
[15:06:18] Completed 100%
[15:06:18] Finished fah_main
[15:06:18] 
[15:06:18] Successful run
[15:06:18] DynamicWrapper: Finished Work Unit: sleep=10000
[15:06:28] Reserved 11340 bytes for xtc file; Cosm status=0
[15:06:28] Allocated 11340 bytes for xtc file
[15:06:28] - Reading up to 11340 from "work/wudata_09.xtc": Read 11340
[15:06:28] Read 11340 bytes from xtc file; available packet space=786419124
[15:06:28] xtc file hash check passed.
[15:06:28] Reserved 3621840 3621840 786419124 bytes for arc file=<work/wudata_09.trr> Cosm status=0
[15:06:28] Allocated 3621840 bytes for arc file
[15:06:28] - Reading up to 3621840 from "work/wudata_09.trr": Read 3621840
[15:06:28] Read 3621840 bytes from arc file; available packet space=782797284
[15:06:28] trr file hash check passed.
[15:06:28] Allocated 544 bytes for edr file
[15:06:28] Read bedfile
[15:06:28] edr file hash check passed.
[15:06:28] Allocated 492610 bytes for logfile
[15:06:28] Read logfile
[15:06:28] GuardedRun: success in DynamicWrapper
[15:06:28] GuardedRun: done
[15:06:28] Run: GuardedRun completed.
[15:06:33] + Opened results file
[15:06:33] - Writing 4126846 bytes of core data to disk...
[15:06:34] Done: 4126334 -> 3097778 (compressed to 75.0 percent)
[15:06:34]   ... Done.
[15:06:34] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[15:06:34] Shutting down core 
[15:06:34] 
[15:06:34] Folding@home Core Shutdown: FINISHED_UNIT
[15:06:37] CoreStatus = 64 (100)
[15:06:37] Unit 9 finished with 98 percent of time to deadline remaining.
[15:06:37] Updated performance fraction: 0.978628
[15:06:37] Sending work to server
[15:06:37] Project: 10626 (Run 67, Clone 26, Gen 0)
[15:06:37] - Read packet limit of 540015616... Set to 524286976.


[15:06:37] + Attempting to send results [May 26 15:06:37 UTC]
[15:06:37] - Reading file work/wuresults_09.dat from core
[15:06:37]   (Read 3098290 bytes from disk)
[15:06:37] Gpu type=3 species=30.
[15:06:37] Connecting to http://171.67.108.20:8080/
[15:06:57] Posted data.
[15:06:57] Initial: 0000; - Uploaded at ~151 kB/s
[15:06:57] - Averaged speed for that direction ~151 kB/s
[15:06:57] + Results successfully sent
[15:06:57] Thank you for your contribution to Folding@Home.
[15:06:57] + Number of Units Completed: 18

[15:07:01] Trying to send all finished work units
[15:07:01] + No unsent completed units remaining.
[15:07:01] - Preparing to get new work unit...
[15:07:01] Cleaning up work directory
[15:07:01] + Attempting to get work packet
[15:07:01] - Will indicate memory of 12279 MB
[15:07:01] Gpu type=3 species=30.
[15:07:01] - Connecting to assignment server
[15:07:01] Connecting to http://assign-GPU.stanford.edu:8080/
[15:07:01] Posted data.
[15:07:01] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:07:01] + News From Folding@Home: Welcome to Folding@Home
[15:07:02] Loaded queue successfully.
[15:07:02] Gpu type=3 species=30.
[15:07:02] Empty passkey
[15:07:02] Connecting to http://171.67.108.20:8080/
[15:07:02] - Couldn't send HTTP request to server
[15:07:02] + Could not connect to Work Server
[15:07:02] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[15:07:15] + Attempting to get work packet
[15:07:15] - Will indicate memory of 12279 MB
[15:07:15] Gpu type=3 species=30.
[15:07:15] - Connecting to assignment server
[15:07:15] Connecting to http://assign-GPU.stanford.edu:8080/
[15:07:16] Posted data.
[15:07:16] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:07:16] + News From Folding@Home: Welcome to Folding@Home
[15:07:16] Loaded queue successfully.
[15:07:16] Gpu type=3 species=30.
[15:07:16] Empty passkey
[15:07:16] Connecting to http://171.67.108.20:8080/
[15:07:19] - Couldn't send HTTP request to server
[15:07:19] + Could not connect to Work Server
[15:07:19] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[15:07:43] + Attempting to get work packet
[15:07:43] - Will indicate memory of 12279 MB
[15:07:43] Gpu type=3 species=30.
[15:07:43] - Connecting to assignment server
[15:07:43] Connecting to http://assign-GPU.stanford.edu:8080/
[15:07:43] Posted data.
[15:07:43] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:07:43] + News From Folding@Home: Welcome to Folding@Home
[15:07:43] Loaded queue successfully.
[15:07:43] Gpu type=3 species=30.
[15:07:43] Empty passkey
[15:07:43] Connecting to http://171.67.108.20:8080/
[15:07:43] - Couldn't send HTTP request to server
[15:07:43] + Could not connect to Work Server
[15:07:43] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[15:08:10] + Attempting to get work packet
[15:08:10] - Will indicate memory of 12279 MB
[15:08:10] Gpu type=3 species=30.
[15:08:10] - Connecting to assignment server
[15:08:10] Connecting to http://assign-GPU.stanford.edu:8080/
[15:08:10] Posted data.
[15:08:10] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:08:10] + News From Folding@Home: Welcome to Folding@Home
[15:08:11] Loaded queue successfully.
[15:08:11] Gpu type=3 species=30.
[15:08:11] Empty passkey
[15:08:11] Connecting to http://171.67.108.20:8080/
[15:08:11] - Couldn't send HTTP request to server
[15:08:11] + Could not connect to Work Server
[15:08:11] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[15:08:57] + Attempting to get work packet
[15:08:57] - Will indicate memory of 12279 MB
[15:08:57] Gpu type=3 species=30.
[15:08:57] - Connecting to assignment server
[15:08:57] Connecting to http://assign-GPU.stanford.edu:8080/
[15:08:57] Posted data.
[15:08:57] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:08:57] + News From Folding@Home: Welcome to Folding@Home
[15:08:57] Loaded queue successfully.
[15:08:57] Gpu type=3 species=30.
[15:08:57] Empty passkey
[15:08:57] Connecting to http://171.67.108.20:8080/
[15:08:57] - Couldn't send HTTP request to server
[15:08:57] + Could not connect to Work Server
[15:08:57] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[15:10:21] + Attempting to get work packet
[15:10:21] - Will indicate memory of 12279 MB
[15:10:21] Gpu type=3 species=30.
[15:10:21] - Connecting to assignment server
[15:10:21] Connecting to http://assign-GPU.stanford.edu:8080/
[15:10:22] Posted data.
[15:10:22] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:10:22] + News From Folding@Home: Welcome to Folding@Home
[15:10:22] Loaded queue successfully.
[15:10:22] Gpu type=3 species=30.
[15:10:22] Empty passkey
[15:10:22] Connecting to http://171.67.108.20:8080/
[15:10:22] - Couldn't send HTTP request to server
[15:10:22] + Could not connect to Work Server
[15:10:22] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
[15:13:06] + Attempting to get work packet
[15:13:06] - Will indicate memory of 12279 MB
[15:13:06] Gpu type=3 species=30.
[15:13:06] - Connecting to assignment server
[15:13:06] Connecting to http://assign-GPU.stanford.edu:8080/
[15:13:06] Posted data.
[15:13:06] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:13:06] + News From Folding@Home: Welcome to Folding@Home
[15:13:06] Loaded queue successfully.
[15:13:06] Gpu type=3 species=30.
[15:13:06] Empty passkey
[15:13:06] Connecting to http://171.67.108.20:8080/
[15:13:06] - Couldn't send HTTP request to server
[15:13:06] + Could not connect to Work Server
[15:13:06] - Attempt #7  to get work failed, and no other work to do.
Waiting before retry.
[15:18:31] + Attempting to get work packet
[15:18:31] - Will indicate memory of 12279 MB
[15:18:31] Gpu type=3 species=30.
[15:18:31] - Connecting to assignment server
[15:18:31] Connecting to http://assign-GPU.stanford.edu:8080/
[15:18:31] Posted data.
[15:18:31] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:18:31] + News From Folding@Home: Welcome to Folding@Home
[15:18:32] Loaded queue successfully.
[15:18:32] Gpu type=3 species=30.
[15:18:32] Empty passkey
[15:18:32] Connecting to http://171.67.108.20:8080/
[15:18:32] - Couldn't send HTTP request to server
[15:18:32] + Could not connect to Work Server
[15:18:32] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.
[15:29:18] + Attempting to get work packet
[15:29:18] - Will indicate memory of 12279 MB
[15:29:18] Gpu type=3 species=30.
[15:29:18] - Connecting to assignment server
[15:29:18] Connecting to http://assign-GPU.stanford.edu:8080/
[15:29:18] Posted data.
[15:29:18] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:29:18] + News From Folding@Home: Welcome to Folding@Home
[15:29:18] Loaded queue successfully.
[15:29:18] Gpu type=3 species=30.
[15:29:18] Empty passkey
[15:29:18] Connecting to http://171.67.108.20:8080/
[15:29:18] - Couldn't send HTTP request to server
[15:29:18] + Could not connect to Work Server
[15:29:18] - Attempt #9  to get work failed, and no other work to do.
Waiting before retry.
[15:31:00] - Autosending finished units... [May 26 15:31:00 UTC]
[15:31:00] Trying to send all finished work units
[15:31:00] + No unsent completed units remaining.
[15:31:00] - Autosend completed
[15:50:47] + Attempting to get work packet
[15:50:47] - Will indicate memory of 12279 MB
[15:50:47] Gpu type=3 species=30.
[15:50:47] - Connecting to assignment server
[15:50:47] Connecting to http://assign-GPU.stanford.edu:8080/
[15:50:48] Posted data.
[15:50:48] Initial: 43AB; - Successful: assigned to (171.67.108.20).
[15:50:48] + News From Folding@Home: Welcome to Folding@Home
[15:50:48] Loaded queue successfully.
[15:50:48] Gpu type=3 species=30.
[15:50:48] Empty passkey
[15:50:48] Connecting to http://171.67.108.20:8080/
[15:50:48] - Couldn't send HTTP request to server
[15:50:48] + Could not connect to Work Server
[15:50:48] - Attempt #10  to get work failed, and no other work to do.
Waiting before retry.

[Sidicas]

You called it..
There are just too few of the GPU3 / Core_15 work units.. It's the only thing the Fermi cards can run and my cards are plowing through them like nothing and then sitting around waiting 10 or 15 tries for it to pick up another one from the server..

The server can't dish them out fast enough... So go ahead and do your Core_11 units and sit happy while my GTX 400 series cards sit idle for a few minutes between workunits...

[RHN]

This is from when I deleted my Work folder, core and all of that in the hopes that it may pick it up thereafter:

Code: Select all

--- Opening Log file [May 26 16:07:37 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Ryan Nelson\AppData\Roaming\Folding@home-gpu
Arguments: -advmethods -verbosity 9 

[16:07:37] - Ask before connecting: No
[16:07:37] - User name: RHN (Team 14)
[16:07:37] - User ID: AMISUPPOSEDTOHIDETHIS?
[16:07:37] - Machine ID: 2
[16:07:37] 
[16:07:37] Gpu type=2 species=30.
[16:07:37] Work directory not found. Creating...
[16:07:37] Could not open work queue, generating new queue...
[16:07:37] Initialization complete
[16:07:37] - Preparing to get new work unit...
[16:07:37] Cleaning up work directory
[16:07:37] + Attempting to get work packet
[16:07:37] Passkey found
[16:07:37] - Will indicate memory of 2815 MB
[16:07:37] Gpu type=2 species=30.
[16:07:37] - Detect CPU. Vendor: AuthenticAMD, Family: 15, Model: 3, Stepping: 2
[16:07:37] - Connecting to assignment server
[16:07:37] Connecting to http://assign-GPU.stanford.edu:8080/
[16:07:37] - Autosending finished units... [May 26 16:07:37 UTC]
[16:07:37] Trying to send all finished work units
[16:07:37] + No unsent completed units remaining.
[16:07:37] - Autosend completed
[16:07:38] Posted data.
[16:07:38] Initial: 40AB; - Successful: assigned to (171.64.65.61).
[16:07:38] + News From Folding@Home: Welcome to Folding@Home
[16:07:38] Loaded queue successfully.
[16:07:38] Gpu type=2 species=30.
[16:07:38] Sent data
[16:07:38] Connecting to http://171.64.65.61:8080/
[16:07:39] Posted data.
[16:07:39] Initial: 0000; - Receiving payload (expected size: 74246)
[16:07:40] - Downloaded at ~72 kB/s
[16:07:40] - Averaged speed for that direction ~72 kB/s
[16:07:40] + Received work.
[16:07:40] + Closed connections
[16:07:40] 
[16:07:40] + Processing work unit
[16:07:40] Core required: FahCore_11.exe
[16:07:40] Core not found.
[16:07:40] - Core is not present or corrupted.
[16:07:40] - Attempting to download new core...
[16:07:40] + Downloading new core: FahCore_11.exe
[16:07:40] Downloading core (/~pande/Win32/x86/NVIDIA/G80/Core_11.fah from www.stanford.edu)
[16:07:40] Initial: AFDE; + 10240 bytes downloaded
... (Downloading core, I truncated it because it was boring) ...
[16:07:49] Initial: CADE; + 665067 bytes downloaded
[16:07:49] Verifying core Core_11.fah...
[16:07:49] Signature is VALID
[16:07:49] 
[16:07:49] Trying to unzip core FahCore_11.exe
[16:07:49] Decompressed FahCore_11.exe (1908736 bytes) successfully
[16:07:54] + Core successfully engaged
[16:07:59] 
[16:07:59] + Processing work unit
[16:07:59] Core required: FahCore_11.exe
[16:07:59] Core found.
[16:07:59] Working on queue slot 01 [May 26 16:07:59 UTC]
[16:07:59] + Working ...
[16:07:59] - Calling '.\FahCore_11.exe -dir work/ -suffix 01 -nice 19 -priority 96 -checkpoint 15 -verbose -lifeline 2340 -version 630'

[16:07:59] 
[16:07:59] *------------------------------*
[16:07:59] Folding@Home GPU Core
[16:07:59] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[16:07:59] 
[16:07:59] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[16:07:59] Build host: amoeba
[16:07:59] Board Type: Nvidia
[16:07:59] Core      : 
[16:07:59] Preparing to commence simulation
[16:07:59] - Looking at optimizations...
[16:07:59] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[16:07:59] - Created dyn
[16:07:59] - Files status OK
[16:07:59] - Expanded 73734 -> 383588 (decompressed 520.2 percent)
[16:07:59] Called DecompressByteArray: compressed_data_size=73734 data_size=383588, decompressed_data_size=383588 diff=0
[16:07:59] - Digital signature verified
[16:07:59] 
[16:07:59] Project: 6604 (Run 2, Clone 768, Gen 94)
[16:07:59] 
[16:07:59] Assembly optimizations on if available.
[16:07:59] Entering M.D.
[16:08:06] Tpr hash work/wudata_01.tpr:  146415202 4109755875 2917508461 2532975953 3977685779
[16:08:06] 
[16:08:06] Calling fah_main args: 14 usage=100
[16:08:06] 
[16:08:06] Working on Protein
[16:08:08] Client config found, loading data.
[16:08:08] Starting GUI Server
[16:09:45] Completed 1%
[16:11:22] Completed 2%
[16:12:59] Completed 3%
[16:14:36] Completed 4%
[16:16:14] Completed 5%
[16:17:48] Completed 6%
[16:19:19] Completed 7%
[16:20:49] Completed 8%
[16:22:21] Completed 9%
[16:23:52] Completed 10%

[PantherX]

It is recommended to use the 197.45 Drivers. Right now you are using the BETA Drivers which right now aren't supported by GPU3 Client yet. Your card is capable of running both GPU2 and GPU3 Clients. Keep in mind that Fermi Cards (GTX 400 Series) can only use GPU3 Client with FAHCore_15 only. In your case, you are using GPU3 Client and because your GPU is Non-Fermi, you are getting WUs of FAHCore_11 and so far they have been successful. On my GTX 260 SOC, I was able to finish 6 FAHCore_15 WUs and after that, I am getting FAHCore_11 WUs and they all are running smoothly. I guess that the servers are reserving the FAHCore_15 WUs to give to Fermi users as the Development Team is concentrating on finding bugs in the FAHCore_15. I could be wrong but I am glad that so far, there aren't any major bugs with any Nvidia GPU yet.