FAHMon can't access 2 of 4 clients

This forum contains information about 3rd party applications which may be of use to those who run the FAH client and one place where you might be able to get help when using one of those apps.

Moderator: Site Moderators

Post Reply
HardToThrill
Posts: 22
Joined: Sun Mar 22, 2009 8:12 pm

FAHMon can't access 2 of 4 clients

Post by HardToThrill »

Hi,

I have FAH installed & running on three XPProSP3 computers on a workgroup network. FAHMon accesses (green icon) the CPU clients (v5.03) on two machines, but does not access (black icon) either the v6.3 CPU or ATI GPU clients on the other machine. I also installed FAHMon on directly the 3rd computer & get the same results. The FAH folder permission on all is set to share.

Any suggestions would be appreciated, thanks
Top
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:
Contact toTOW

Re: FAHMon can't access 2 of 4 clients

Post by toTOW »

Are you sure that you shared the right folder for the v6 clients ?

Look in : "C:\Documents and Settings\<your_windows_username>\Application Data\Folding@home-gpu\"
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Top
HardToThrill
Posts: 22
Joined: Sun Mar 22, 2009 8:12 pm

Re: FAHMon can't access 2 of 4 clients

Post by HardToThrill »

Thanks - I mapped the application folder like the v5 clients - didn't know it was different for the v6 clients. I'll try it now ...

That worked - problem resolved!
Top
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:
Contact 7im

Re: FAHMon can't access 2 of 4 clients

Post by 7im »

Maybe we could get UF to add something to his readme file about this... ;)
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Top
MtM
Posts: 1579
Joined: Fri Jun 27, 2008 2:20 pm
Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot
Location: The Netherlands
Contact:
Contact MtM

Re: FAHMon can't access 2 of 4 clients

Post by MtM »

how about adding a scan to look for clients in common places during installation :) Would be even better :mrgreen: It's really dissapointing I can not do much with c or I would try and help out with this.
Top
HardToThrill
Posts: 22
Joined: Sun Mar 22, 2009 8:12 pm

Re: FAHMon can't access 2 of 4 clients

Post by HardToThrill »

There were directions somewhere to direct it to the folder containing the .exe file ...
Top
uncle_fungus
Site Admin
Posts: 1288
Joined: Fri Nov 30, 2007 9:37 am
Location: Oxfordshire, UK

Re: FAHMon can't access 2 of 4 clients

Post by uncle_fungus »

7im wrote:Maybe we could get UF to add something to his readme file about this... ;)
What, you think people actually read the documentation? ;)
Top
Shadowtester
Posts: 79
Joined: Tue Dec 04, 2007 4:18 am

Re: FAHMon can't access 2 of 4 clients

Post by Shadowtester »

uncle_fungus wrote:
7im wrote:Maybe we could get UF to add something to his readme file about this... ;)
What, you think people actually read the documentation? ;)
What would be the fun in that :wink:
Shadowtester

Image
Top
Post Reply

Return to “3rd party contributed software”