Project: 2668 (Run 0, Clone 275, Gen 60) - not credited yet

[G-Byte]

Hi again,

This wu was started on the 13 and finished yesterday. I was watching for the updates at EOC's stats page but it was not credited. With it being a larger point wu it is very noticeable when used in an update.

I am using vmware and linux to do this smp folding because it almost doubles my points and the wu gets done faster for faster results to give back to the folding project. I just checked this sites official stats http://fah-web.stanford.edu/cgi-bin/mai ... range=2000 for my user name and for the wu 2668 and the 2669 wu, there is not one listing for either of them. As can be seen in this post and this one ... http://foldingforum.org/viewtopic.php?f=19&t=7968 ... at least one of them were completed, were uploaded and accepted and thanks were given.

So my questions are what might have happened? And I am curious about how long from the time that any wu is confirmed to be uploaded to stanfords servers and the time that they are put into the system as a completed wu so any points will be given where they are due?!?!

Code: Select all

[17:20:37] 
[17:20:37] *------------------------------*
[17:20:37] Folding@Home Gromacs SMP Core
[17:20:37] Version 2.01 (Wed Aug 13 13:11:25 PDT 2008)
[17:20:37] 
[17:20:37] Preparing to commence simulation
[17:20:37] - Ensuring status. Please wait.
[17:20:46] - Assembly optimizations manually forced on.
[17:20:46] - Not checking prior termination.
[17:20:49] - Expanded 4839176 -> 23992989 (decompressed 495.8 percent)
[17:20:50] Called DecompressByteArray: compressed_data_size=4839176 data_size=23992989, decompressed_data_size=23992989 diff=0
[17:20:50] - Digital signature verified
[17:20:50] 
[17:20:50] Project: 2668 (Run 0, Clone 275, Gen 60)
[17:20:50] 
[17:20:50] Assembly optimizations on if available.
[17:20:50] Entering M.D.
[17:37:15] Completed 2500 out of 250000 steps  (1%)
[17:53:27] Completed 5000 out of 250000 steps  (2%)
[18:09:40] Completed 7500 out of 250000 steps  (3%)
[18:26:04] Completed 10000 out of 250000 steps  (4%)
[18:42:50] Completed 12500 out of 250000 steps  (5%)
[18:59:00] Completed 15000 out of 250000 steps  (6%)
[19:15:42] Completed 17500 out of 250000 steps  (7%)
[19:32:29] Completed 20000 out of 250000 steps  (8%)
[19:48:38] Completed 22500 out of 250000 steps  (9%)
[20:04:50] Completed 25000 out of 250000 steps  (10%)
[20:20:57] Completed 27500 out of 250000 steps  (11%)
[20:37:06] Completed 30000 out of 250000 steps  (12%)
[20:53:06] Completed 32500 out of 250000 steps  (13%)
[21:09:58] Completed 35000 out of 250000 steps  (14%)
[21:26:52] Completed 37500 out of 250000 steps  (15%)
[21:43:29] Completed 40000 out of 250000 steps  (16%)
[21:59:45] Completed 42500 out of 250000 steps  (17%)
[22:16:20] Completed 45000 out of 250000 steps  (18%)
[22:32:54] Completed 47500 out of 250000 steps  (19%)
[22:34:00] - Autosending finished units...
[22:34:00] Trying to send all finished work units
[22:34:00] + No unsent completed units remaining.
[22:34:00] - Autosend completed
[22:49:14] Completed 50000 out of 250000 steps  (20%)
[23:05:43] Completed 52500 out of 250000 steps  (21%)
[23:22:07] Completed 55000 out of 250000 steps  (22%)
[23:38:26] Completed 57500 out of 250000 steps  (23%)
[23:54:46] Completed 60000 out of 250000 steps  (24%)
[00:11:23] Completed 62500 out of 250000 steps  (25%)
[00:28:14] Completed 65000 out of 250000 steps  (26%)
[00:45:15] Completed 67500 out of 250000 steps  (27%)
[01:02:36] Completed 70000 out of 250000 steps  (28%)
[01:19:12] Completed 72500 out of 250000 steps  (29%)
[01:35:36] Completed 75000 out of 250000 steps  (30%)
[01:52:08] Completed 77500 out of 250000 steps  (31%)
[02:08:50] Completed 80000 out of 250000 steps  (32%)
[02:25:58] Completed 82500 out of 250000 steps  (33%)
[02:42:49] Completed 85000 out of 250000 steps  (34%)
[02:59:38] Completed 87500 out of 250000 steps  (35%)
[03:16:20] Completed 90000 out of 250000 steps  (36%)
[03:32:56] Completed 92500 out of 250000 steps  (37%)
[03:49:30] Completed 95000 out of 250000 steps  (38%)
[04:06:06] Completed 97500 out of 250000 steps  (39%)
[04:22:35] Completed 100000 out of 250000 steps  (40%)
[04:34:00] - Autosending finished units...
[04:34:00] Trying to send all finished work units
[04:34:00] + No unsent completed units remaining.
[04:34:00] - Autosend completed
[04:39:08] Completed 102500 out of 250000 steps  (41%)
[04:55:40] Completed 105000 out of 250000 steps  (42%)
[05:01:07] ***** Got a SIGTERM signal (15)
[05:01:07] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [January 14 08:14:06] 


# SMP Client ##################################################################
###############################################################################

                       Folding@Home Client Version 6.02

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/folding
Executable: /home/folding/fah6
Arguments: -smp -verbosity 9 -forceasm 

Warning:
 By using the -forceasm flag, you are overriding
 safeguards in the program. If you did not intend to
 do this, please restart the program without -forceasm.
 If work units are not completing fully (and particularly
 if your machine is overclocked), then please discontinue
 use of the flag.

[08:14:06] - Ask before connecting: No
[08:14:06] - User ID: 5846FFBA1995DF19
[08:14:06] - Machine ID: 1
[08:14:06] 
[08:14:06] Loaded queue successfully.
[08:14:06] - Autosending finished units...
[08:14:06] Trying to send all finished work units
[08:14:06] + No unsent completed units remaining.
[08:14:06] - Autosend completed
[08:14:06] 
[08:14:06] + Processing work unit
[08:14:06] Core required: FahCore_a2.exe
[08:14:06] Core found.
[08:14:06] Working on Unit 07 [January 14 08:14:06]
[08:14:06] + Working ...
[08:14:06] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 07 -checkpoint 15 -forceasm -verbose -lifeline 2586 -version 602'

[08:14:07] 
[08:14:07] *------------------------------*
[08:14:07] Folding@Home Gromacs SMP Core
[08:14:07] Version 2.01 (Wed Aug 13 13:11:25 PDT 2008)
[08:14:07] 
[08:14:07] Preparing to commence simulation
[08:14:07] - Ensuring status. Please wait.
[08:14:17] - Assembly optimizations manually forced on.
[08:14:17] - Not checking prior termination.
[08:14:24] - Expanded 4839176 -> 23992989 (decompressed 495.8 percent)
[08:14:28] Called DecompressByteArray: compressed_data_size=4839176 data_size=23992989, decompressed_data_size=23992989 diff=0
[08:14:28] - Digital signature verified
[08:14:28] 
[08:14:28] Project: 2668 (Run 0, Clone 275, Gen 60)
[08:14:28] 
[08:14:28] Assembly optimizations on if available.
[08:14:28] Entering M.D.
[08:14:34] Will resume from checkpoint file
[08:14:42] Resuming from checkpoint
[08:14:43] Verified work/wudata_07.log
[08:14:45] Verified work/wudata_07.trr
[08:14:47] Verified work/wudata_07.xtc
[08:14:47] Verified work/wudata_07.edr
[08:14:47] Completed 105010 out of 250000 steps  (42%)
[08:31:09] Completed 107500 out of 250000 steps  (43%)
[08:47:44] Completed 110000 out of 250000 steps  (44%)
[09:04:17] Completed 112500 out of 250000 steps  (45%)
[09:21:04] Completed 115000 out of 250000 steps  (46%)
[09:37:57] Completed 117500 out of 250000 steps  (47%)
[09:54:45] Completed 120000 out of 250000 steps  (48%)
[10:11:23] Completed 122500 out of 250000 steps  (49%)
[10:27:40] Completed 125000 out of 250000 steps  (50%)
[10:43:48] Completed 127500 out of 250000 steps  (51%)
[11:00:04] Completed 130000 out of 250000 steps  (52%)
[11:16:54] Completed 132500 out of 250000 steps  (53%)
[11:33:33] Completed 135000 out of 250000 steps  (54%)
[11:49:54] Completed 137500 out of 250000 steps  (55%)
[12:06:02] Completed 140000 out of 250000 steps  (56%)
[12:22:12] Completed 142500 out of 250000 steps  (57%)
[12:38:22] Completed 145000 out of 250000 steps  (58%)
[12:54:32] Completed 147500 out of 250000 steps  (59%)
[13:10:42] Completed 150000 out of 250000 steps  (60%)
[13:26:52] Completed 152500 out of 250000 steps  (61%)
[13:43:01] Completed 155000 out of 250000 steps  (62%)
[13:59:12] Completed 157500 out of 250000 steps  (63%)
[14:14:02] - Autosending finished units...
[14:14:02] Trying to send all finished work units
[14:14:02] + No unsent completed units remaining.
[14:14:02] - Autosend completed
[14:15:21] Completed 160000 out of 250000 steps  (64%)
[14:31:32] Completed 162500 out of 250000 steps  (65%)
[14:47:41] Completed 165000 out of 250000 steps  (66%)
[15:03:50] Completed 167500 out of 250000 steps  (67%)
[15:20:00] Completed 170000 out of 250000 steps  (68%)
[15:36:11] Completed 172500 out of 250000 steps  (69%)
[15:52:20] Completed 175000 out of 250000 steps  (70%)
[16:08:27] Completed 177500 out of 250000 steps  (71%)
[16:24:39] Completed 180000 out of 250000 steps  (72%)
[16:40:51] Completed 182500 out of 250000 steps  (73%)
[16:56:59] Completed 185000 out of 250000 steps  (74%)
[17:13:07] Completed 187500 out of 250000 steps  (75%)
[17:29:16] Completed 190000 out of 250000 steps  (76%)
[17:45:44] Completed 192500 out of 250000 steps  (77%)
[18:02:36] Completed 195000 out of 250000 steps  (78%)
[18:19:14] Completed 197500 out of 250000 steps  (79%)
[18:36:20] Completed 200000 out of 250000 steps  (80%)
[18:53:33] Completed 202500 out of 250000 steps  (81%)
[19:10:07] Completed 205000 out of 250000 steps  (82%)
[19:26:53] Completed 207500 out of 250000 steps  (83%)
[19:43:05] Completed 210000 out of 250000 steps  (84%)
[19:59:18] Completed 212500 out of 250000 steps  (85%)
[20:14:02] - Autosending finished units...
[20:14:02] Trying to send all finished work units
[20:14:02] + No unsent completed units remaining.
[20:14:02] - Autosend completed
[20:15:32] Completed 215000 out of 250000 steps  (86%)
[20:31:45] Completed 217500 out of 250000 steps  (87%)
[20:47:59] Completed 220000 out of 250000 steps  (88%)
[21:04:12] Completed 222500 out of 250000 steps  (89%)
[21:21:21] Completed 225000 out of 250000 steps  (90%)
[21:37:33] Completed 227500 out of 250000 steps  (91%)
[21:54:01] Completed 230000 out of 250000 steps  (92%)
[22:11:25] Completed 232500 out of 250000 steps  (93%)
[22:28:03] Completed 235000 out of 250000 steps  (94%)
[22:44:35] Completed 237500 out of 250000 steps  (95%)
[23:02:10] Completed 240000 out of 250000 steps  (96%)
[23:20:01] Completed 242500 out of 250000 steps  (97%)
[23:37:39] Completed 245000 out of 250000 steps  (98%)
[23:55:13] Completed 247500 out of 250000 steps  (99%)
[00:12:38] Completed 250000 out of 250000 steps  (100%)
[00:13:40] 
[00:13:40] Finished Work Unit:
[00:13:41] - Reading up to 21141072 from "work/wudata_07.trr": Read 21141072
[00:13:43] trr file hash check passed.
[00:13:43] - Reading up to 27631088 from "work/wudata_07.xtc": Read 27631088
[00:13:47] xtc file hash check passed.
[00:13:47] edr file hash check passed.
[00:13:47] logfile size: 183079
[00:13:47] Leaving Run
[00:13:51] - Writing 49215623 bytes of core data to disk...
[00:13:52]   ... Done.
[00:14:02] - Shutting down core
[00:14:02] 
[00:14:02] Folding@home Core Shutdown: FINISHED_UNIT
[00:17:03] CoreStatus = 64 (100)
[00:17:03] Unit 7 finished with 57 percent of time to deadline remaining.
[00:17:03] Updated performance fraction: 0.561257
[00:17:03] Sending work to server


[00:17:03] + Attempting to send results
[00:17:03] - Reading file work/wuresults_07.dat from core
[00:17:03]   (Read 49215623 bytes from disk)
[00:17:03] Connecting to http://171.64.65.56:8080/
[00:23:46] Posted data.
[00:23:46] Initial: 0000; - Uploaded at ~116 kB/s
[00:23:55] - Averaged speed for that direction ~113 kB/s
[00:23:55] + Results successfully sent
[00:23:55] Thank you for your contribution to Folding@Home.
[00:23:55] + Number of Units Completed: 2

[00:30:02] - Warning: Could not delete all work unit files (7): Core file absent
[00:30:02] Trying to send all finished work units
[00:30:02] + No unsent completed units remaining.
[00:30:02] - Preparing to get new work unit...
[00:30:02] + Attempting to get work packet
[00:30:02] - Will indicate memory of 431 MB
[00:30:02] - Detect CPU. Vendor: AuthenticAMD, Family: 15, Model: 11, Stepping: 2
[00:30:02] - Connecting to assignment server
[00:30:02] Connecting to http://assign.stanford.edu:8080/
[00:30:02] Posted data.
[00:30:02] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[00:30:02] + News From Folding@Home: Welcome to Folding@Home
[00:30:02] Loaded queue successfully.
[00:30:02] Connecting to http://171.64.65.56:8080/
[00:30:08] Posted data.
[00:30:08] Initial: 0000; - Receiving payload (expected size: 4831640)
[00:30:47] - Downloaded at ~120 kB/s
[00:30:47] - Averaged speed for that direction ~140 kB/s
[00:30:47] + Received work.
[00:30:47] Trying to send all finished work units
[00:30:47] + No unsent completed units remaining.
[00:30:47] + Closed connections
[00:30:47] 
[00:30:47] + Processing work unit
[00:30:47] Core required: FahCore_a2.exe
[00:30:47] Core found.
[00:30:47] Working on Unit 08 [January 15 00:30:47]
[00:30:47] + Working ...
[00:30:47] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a2.exe -dir work/ -suffix 08 -checkpoint 15 -forceasm -verbose -lifeline 2586 -version 602'

[toTOW]

It usually take up to 3 hours for a WU to show in the stats ... sometimes a bit more.

There's only one report for this WU in the DB ... but it's not under your username.

Strangely, username/teamnumber and CPUID match with this WU : viewtopic.php?f=19&t=7968

There might be an issue with your client configurations.

Hi _ (team 0),
Your WU (P2668 R0 C275 G60) was added to the stats database on 2009-01-14 18:25:43 for 1920 points of credit.
User ID starting with : 5846

This matches with your log ... but something is wrong with your username and team number ...

[G-Byte]

Ok, progress, great.

So on the 9th and 10th of this month I did notice that the wu were credited to me and it would have been the same un/tn/cpuid as this and the other post that you mentioned.

I will ask about my config elsewhere but the 1st two that I did, 9th/10th, worked good, my hardware did the work and got credit for it.

But as to these two specific wu you can see that I have log files and the only way I could have gotten them was from my computer here so can the credit be given where it was earned?

I don't really want to give out my passkey but it starts with these characters: 89d56034... I don't know what you mean for a user id of 5846... what/where would this be for me? I only fold for team 37726 but I did wcg for over two years.

The 8th was when I was finally able to get the vmware/linux running properly hense the extra ppd for the 9/10th. From then on to today I have done a 1920 pointer in about 28-32 hours so there might be more missing that I know of.

ps: more progress. I checked in fahmon and that 5846... id is what is showing in the log for my vmware appliance, but the two gpu2's have an id starting with 5410... I asked for some help and it should come before this smp wu is complete, 9h29m left to go.

The client.cfg file on network ip that vm makes has just a basic config. I don't know why that would be as a copy I made of it is good with all my info.

[toTOW]

Run your client with -configonly flag, and you'll be able to enter all client settings again.

[G-Byte]

Ok, I tried it three times already and although I did enter my passkey I got different user id because it could not be found locally. Here is what I have found for info. The 1st and 2nd time I got the same id that we know about already. The third time I totally uninstalled the vmplayer, reobooted and reinstall. I then got another copy of the vm linux appliance. Went through putting in my Nic and passkey, it don't ask for the team number cause the fella that made this made it for Overclockers dot net.

The client config file is setup for 5 minute update

• passkey 89d5603*******************e65f03
  
  1st try for vmware/linux
  [04:46:07] - Ask before connecting: No
  [04:46:07] - User name: G-Byte (Team 37726)
  [04:46:07] - User ID not found locally
  [04:46:07] + Requesting User ID from server
  [04:46:07] - Getting ID from AS:
  [04:46:07] Connecting to http://assign.stanford.edu:8080/
  [04:46:08] Posted data.
  [04:46:08] Initial: E970; - Received User ID = 70E97****77EAD88
  [04:46:08] - Machine ID: 1
  
  2nd try for vmware/linux
  [05:04:01] - Ask before connecting: No
  [05:04:01] - User name: G-Byte (Team 37726)
  [05:04:01] - User ID: 70E97****77EAD88
  [05:04:01] - Machine ID: 1
  
  3rd try and this try at it:
  [08:32:02] - Ask before connecting: No
  [08:32:02] - User name: G-Byte (Team 37726)
  [08:32:02] - User ID not found locally
  [08:32:02] + Requesting User ID from server
  [08:32:02] - Getting ID from AS:
  [08:32:02] Connecting to http://assign.stanford.edu:8080/
  [08:32:03] Posted data.
  [08:32:03] Initial: BD2A; - Received User ID = 2ABD19C86DB83EFB
  [08:32:03] - Machine ID: 1
  
  1st User ID: 70E97****77EAD88
  2nd User ID 70E97****77EAD88
  3rd user id: 2ABD19C86DB83EFB
  9800gt gpu2
  [04:21:00] - Ask before connecting: No
  [04:21:00] - User name: G-Byte (Team 37726)
  [04:21:00] - User ID: 54103*****C7E44DE
  [04:21:00] - Machine ID: 2
  
  9600gt gpu2
  [04:21:00] - Ask before connecting: No
  [04:21:00] - User name: G-Byte (Team 37726)
  [04:21:00] - User ID: 5410*****C7E44DE
  [04:21:00] - Machine ID: 3
  
  and here is my client.cfg file
  
  [settings]
  username=G-Byte
  team=37726
  passkey=89d560344bc**********63a08e65f03
  asknet=no
  machineid=1
  bigpackets=small
  
  [http]
  active=no
  host=localhost
  port=8080
  
  [core]
  priority=96
  checkpoint=5
  
  [clienttype]
  type=3
  memory=256