Project 5801 issues. [Should be Offline]
Moderators: Site Moderators, FAHC Science Team
Re: Project 5801 issues.
I've finally gotten rid of my 5801's too. I see my returned wu's are way down today so I assume not only my work pc but my home pc was hooped. I cant restart the home pc for a few more hours though.
-
- Posts: 28
- Joined: Tue Feb 12, 2008 11:54 pm
Re: Project 5801 issues.
I'm still partially stuck on the p5801's on both of my graphics cards.
I had to delete the files about 7 times just now before I got a p5506.
I had to delete the files about 7 times just now before I got a p5506.
-
- Posts: 18
- Joined: Wed Jun 18, 2008 5:45 pm
Re: Project 5801 issues.
Thanks - back up and running with a bunch of 5506's!ei57 wrote:You may try to restart now. I've got 5506 on all mine now, but the 5801's may still come through. At least they seem to assign a mix of WU's.Dead Things wrote:Mods - please post notice of when the 5801's have been pulled. All my cores have been shut down by either EUE limit or unstable machine errors, so I'll have to restart them all manually once the coast is clear.
Cheers!
Re: Project 5801 issues.
Add me to the list of those having problems with WU 5801 Run 5 Clone 221 Gen 0.
NANS, EUE limit exceeded, etc.
At first the folding would just disappear. None of the usual "FAH has detected an error..........", just, POOF, gone. I would restart and it would happen again. I deleted the core, restarted and it happened again, Tried deleting the core again and now it doesn't disappear but it won't fold.
NANS, EUE limit exceeded, etc.
At first the folding would just disappear. None of the usual "FAH has detected an error..........", just, POOF, gone. I would restart and it would happen again. I deleted the core, restarted and it happened again, Tried deleting the core again and now it doesn't disappear but it won't fold.
-
- Posts: 14
- Joined: Sun Jun 01, 2008 8:31 pm
- Hardware configuration: q6600+120 extreme, maximus formula, 2gig 800Mzh team 4,4,4,10, PCP&C 1KSR, 9800gtx ssc, 9800gx2 ssc, antec900
Re: Project 5801 issues.
Well whoever you have access to..... Thank you....It seems that the message got through.toTOW wrote:I wish I had access to the servers ...
I spent the time doing my windows updates etc. then when I re-started ....no more 5801's.... Again Thanks to you and the team !!
-
- Posts: 266
- Joined: Sun Dec 02, 2007 6:08 pm
- Location: Central New York
- Contact:
Re: Project 5801 issues.
Don't give up so quick.Jolly-Swagman wrote:there still p5801,s being given out,
Even after Delete Work folder and queue.dat you get em back and EU straight away
So will be shutting down till they have stopped them
Rinse and repeat...
-
- Posts: 62
- Joined: Sun Dec 02, 2007 6:02 am
Re: Project 5801 issues.
I'm another one on who's computers p5801 wont fold on.
Apart from this p5801, no other project EUE's on any of my 15 GPU clients.
Time to rinse and repeat all my boxen.
Luck ...............
Apart from this p5801, no other project EUE's on any of my 15 GPU clients.
Time to rinse and repeat all my boxen.
Luck ...............
-
- Posts: 7
- Joined: Thu Mar 06, 2008 3:53 pm
- Hardware configuration: Q6600@2.880Ghz, 2GB ram, 8800GTS G92, XP 32, SMP 5.91+Nvidia clients
E6750, 2GB ram, 9600GT, XP32, SMP 5.92 +Nvidia clients
E4500, 2GB ram, 8600GT, XP32, SMP 5.91+Nvidia clients
E6400, 2GB ram,Vista 64 bit, SMP 5.91 client
E2180, 2GB ram, XP32, SMP 5.91 client
P4 2.67Ghz, 1GB ram, Win98, 4.00 client
Athlon XP 3200+, 1GB ram, XP 32, 5.04 client
P4 2.67Ghz, 768Mb ram, XP 32, 5.03 client
Re: Project 5801 issues.
Having the same issue here, anyone know if taking off the -advmethods flag will disable the 5801s?
Re: Project 5801 issues.
Just stop and restart your client, then you will get better wu's. 5801 is off the marked now.
Re: Project 5801 issues.
I'm getting them without the -advmethods flag set. (Does that flag even have any function with the GPU2 clients?)larvi wrote:Having the same issue here, anyone know if taking off the -advmethods flag will disable the 5801s?
-Sid
-
- Posts: 266
- Joined: Sun Dec 02, 2007 6:08 pm
- Location: Central New York
- Contact:
Re: Project 5801 issues.
Sid, it has been my experience that it can take as many as six cycles to get rid of the dastardly p5801 WUs.
You most likely already know the procedure, but just in case:
If you get another p5801, stop the client and delete the following:
Work folder
queue.dat file
unitinfo.txt file.
Rinse and repeat as necessary.
Oh yeah, add much patience.
You most likely already know the procedure, but just in case:
If you get another p5801, stop the client and delete the following:
Work folder
queue.dat file
unitinfo.txt file.
Rinse and repeat as necessary.
Oh yeah, add much patience.
Re: Project 5801 issues.
I had just deleted the work folder - finally it seemed to work. At least for me. Didnt even think to delete the other files.
Re: Project 5801 issues.
Thanks FlatheadFlathead74 wrote:Sid, it has been my experience that it can take as many as six cycles to get rid of the dastardly p5801 WUs.
You most likely already know the procedure, but just in case:
If you get another p5801, stop the client and delete the following:
Work folder
queue.dat file
unitinfo.txt file.
Rinse and repeat as necessary.
Oh yeah, add much patience.
Yeah, I've been purging that way here too.
-Sid
PS: 2004 FLSTCI
Re: Project 5801 issues.
So it isn't my overclocked 9600 gso causing the instant mdrun returned errors.
At first, I thought it was but a closer inspection of the logs shows every non-guarded run error to be from this project number.
I hope they get it worked out soon. Hopefully, i don't have to rinse and repeat too many times since I have a relatively limited time to fold each day.
At first, I thought it was but a closer inspection of the logs shows every non-guarded run error to be from this project number.
I hope they get it worked out soon. Hopefully, i don't have to rinse and repeat too many times since I have a relatively limited time to fold each day.
-
- Posts: 266
- Joined: Sun Dec 02, 2007 6:08 pm
- Location: Central New York
- Contact:
Re: Project 5801 issues.
Sid wrote:PS: 2004 FLSTCI
Cool 'dat...
1937 74" Flatty (stock) + 1971 Shovel/'57 frame here...