Help building out a folding machine (motherboard specifically)

A forum for discussing FAH-related hardware choices and info on actual products (not speculation).

Moderator: Site Moderators

Forum rules
Please read the forum rules before posting.
MeeLee
Posts: 1339
Joined: Tue Feb 19, 2019 10:16 pm

Re: Help building out a folding machine (motherboard specifically)

Post by MeeLee »

An RTX GPU needs a PCIE 3.0 x8 slot under Windows, and an X4 slot under Linux.
A top of the line GPU (RTX 3090, and 3080Ti) will need an X8 slot under Linux, and X16 slot under Windows. The bottleneck is probably around an X10-X12 slot speed, which such a slot doesn't exist.

An X1 slot even slows down a GTX 1050, and may be ok for a GT 1030 or less.
Ideally you don't want to fold on such low end GPUs.
Last edited by MeeLee on Mon May 30, 2022 12:27 am, edited 1 time in total.
Mxyzptlk
Posts: 70
Joined: Wed Apr 08, 2020 8:55 pm
Hardware configuration: Lots... Look at my website: www.mxyzptlk.us
Location: California
Contact:

Re: Help building out a folding machine (motherboard specifically)

Post by Mxyzptlk »

I recently just set up a ‘mining’ rack but using an EVGA X99 that i got from EVGA’s B-Stock sales. With the 40 Lane PCIe 5960X ($90 from EBay) it can run the (5) 3.0 x16 slots in x8 mode. So far I only have 3 GPU’s on it (3060ti, 3060ti, 3060), but it seems to be doing very well.
I fold..... look at my folding setups here: https://mxyzptlk.us/about/
gunnarre
Posts: 559
Joined: Sun May 24, 2020 7:23 pm
Location: Norway

Re: Help building out a folding machine (motherboard specifically)

Post by gunnarre »

The EVGA X99 FTW isn't really a "mining" board, but it indeed looks like a very good board for multi-GPU.
Image
Online: GTX 1660 Super + occasional CPU folding in the cold.
Offline: Radeon HD 7770, GTX 1050 Ti 4G OC, RX580
MARSTG
Posts: 40
Joined: Fri Apr 06, 2012 4:20 pm
Hardware configuration: B450 AORUS M w 3800X & WRAITH PRISM
16 GB DELTA RGB 3600 & WD SN 770 500GB
GTX 1070 GAMING X w LG OLED C1 55"
ECLIPSE P300A TG
Location: Montreal

Re: Help building out a folding machine (motherboard specifically)

Post by MARSTG »

@bourbonbelly so, who is the candidate?
Mxyzptlk
Posts: 70
Joined: Wed Apr 08, 2020 8:55 pm
Hardware configuration: Lots... Look at my website: www.mxyzptlk.us
Location: California
Contact:

Re: Help building out a folding machine (motherboard specifically)

Post by Mxyzptlk »

gunnarre wrote: Tue May 31, 2022 8:23 am The EVGA X99 FTW isn't really a "mining" board, but it indeed looks like a very good board for multi-GPU.
You are correct, it is not a mining board, but it’s installed on a “mining rack” with pcie 3.0x16 risers to each card. So far still only running 3 3060’s on it, but the PPD is right where they are supposed to be. Just need to get 2 more…. In time.

But yeah, the X99 that i stumbled across is working great as long as I don’t go crazy and try putting a 3080+ on it… Curious how if it might work though…
I fold..... look at my folding setups here: https://mxyzptlk.us/about/
Post Reply