Failed to send - 34.72.228.44
Moderators: Site Moderators, FAHC Science Team
Failed to send - 34.72.228.44
34.72.228.44 server is down & not attempting to send to CS
Server responded PLEASE WAIT (464) Been like this all night, please fix the problem.
0bytes looks like it full and no CS
Server responded PLEASE WAIT (464) Been like this all night, please fix the problem.
0bytes looks like it full and no CS
Last edited by Joe_H on Mon Apr 11, 2022 2:58 pm, edited 1 time in total.
-
- Posts: 363
- Joined: Tue Feb 12, 2008 7:33 am
- Hardware configuration: Running exclusively Linux headless blades. All are dedicated crunching machines.
- Location: SE Michigan, USA
Failed to send / PLEASE_WAIT (464) / 34.72.228.44:8080
GPU project:18124 run:4 clone:10 gen:618 ran to completion, completed upload, but at end of upload
receives PLEASE_WAIT (464) Failed to send message. This continues after reboot. The WU does not show
up as having been completed using WU checker.
receives PLEASE_WAIT (464) Failed to send message. This continues after reboot. The WU does not show
up as having been completed using WU checker.
Code: Select all
03:50:37:WU01:FS01:0x22:Completed 4950000 out of 5000000 steps (99%)
03:51:51:WU01:FS01:0x22:Completed 5000000 out of 5000000 steps (100%)
03:51:51:WU01:FS01:0x22:Average performance: 234.146 ns/day
03:51:51:WU01:FS01:0x22:Checkpoint completed at step 5000000
03:51:54:WU01:FS01:0x22:Saving result file ../logfile_01.txt
03:51:54:WU01:FS01:0x22:Saving result file checkpointIntegrator.xml.bz2
03:51:54:WU01:FS01:0x22:Saving result file checkpointState.xml.bz2
03:51:54:WU01:FS01:0x22:Saving result file positions.xtc
03:51:54:WU01:FS01:0x22:Saving result file science.log
03:51:54:WU01:FS01:0x22:Folding@home Core Shutdown: FINISHED_UNIT
03:51:55:WU01:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
03:51:55:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
03:51:55:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
03:51:55:WU01:FS01:Connecting to 34.72.228.44:8080
03:52:01:WU01:FS01:Upload 31.36%
03:52:07:WU01:FS01:Upload 62.13%
03:52:13:WU01:FS01:Upload 91.13%
03:52:15:WU01:FS01:Upload complete
03:52:15:WU01:FS01:Server responded PLEASE_WAIT (464)
03:52:15:WARNING:WU01:FS01:Failed to send results, will try again later
03:52:15:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
03:52:15:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
03:52:15:WU01:FS01:Connecting to 34.72.228.44:8080
03:52:21:WU01:FS01:Upload 29.59%
03:52:27:WU01:FS01:Upload 62.13%
03:52:33:WU01:FS01:Upload 94.09%
03:52:34:WU01:FS01:Upload complete
03:52:34:WU01:FS01:Server responded PLEASE_WAIT (464)
03:52:34:WARNING:WU01:FS01:Failed to send results, will try again later
03:53:15:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
03:53:15:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
03:53:15:WU01:FS01:Connecting to 34.72.228.44:8080
03:53:21:WU01:FS01:Upload 29.59%
03:53:27:WU01:FS01:Upload 62.13%
03:53:33:WU01:FS01:Upload 94.09%
03:53:34:WU01:FS01:Upload complete
03:53:34:WU01:FS01:Server responded PLEASE_WAIT (464)
03:53:34:WARNING:WU01:FS01:Failed to send results, will try again later
03:54:52:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
03:54:53:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
03:54:53:WU01:FS01:Connecting to 34.72.228.44:8080
03:54:59:WU01:FS01:Upload 34.32%
03:55:05:WU01:FS01:Upload 66.28%
03:55:11:WU01:FS01:Upload 98.23%
03:55:12:WU01:FS01:Upload complete
03:55:12:WU01:FS01:Server responded PLEASE_WAIT (464)
03:55:12:WARNING:WU01:FS01:Failed to send results, will try again later
03:57:30:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
03:57:30:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
03:57:30:WU01:FS01:Connecting to 34.72.228.44:8080
03:57:36:WU01:FS01:Upload 32.55%
03:57:42:WU01:FS01:Upload 64.50%
03:57:48:WU01:FS01:Upload 95.27%
03:57:49:WU01:FS01:Upload complete
03:57:49:WU01:FS01:Server responded PLEASE_WAIT (464)
03:57:49:WARNING:WU01:FS01:Failed to send results, will try again later
04:01:44:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
04:01:44:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
04:01:44:WU01:FS01:Connecting to 34.72.228.44:8080
04:01:50:WU01:FS01:Upload 31.36%
04:01:56:WU01:FS01:Upload 63.32%
04:02:02:WU01:FS01:Upload 95.86%
04:02:03:WU01:FS01:Upload complete
04:02:03:WU01:FS01:Server responded PLEASE_WAIT (464)
04:02:03:WARNING:WU01:FS01:Failed to send results, will try again later
04:08:35:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
04:08:36:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
04:08:36:WU01:FS01:Connecting to 34.72.228.44:8080
04:08:42:WU01:FS01:Upload 33.73%
04:08:48:WU01:FS01:Upload 65.68%
04:08:54:WU01:FS01:Upload 100.00%
04:08:55:WU01:FS01:Upload complete
04:08:55:WU01:FS01:Server responded PLEASE_WAIT (464)
04:08:55:WARNING:WU01:FS01:Failed to send results, will try again later
-
- Posts: 320
- Joined: Sat May 23, 2009 4:49 pm
- Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970 - Location: Mississippi near Memphis, Tn
Re: Failed to send / PLEASE_WAIT (464) / 34.72.228.44:8080
I have 3 wu's in the same loop.
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
-
- Site Admin
- Posts: 7927
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Failed to send - 34.72.228.44
I have reported this to the manager for the server.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
-
- Posts: 320
- Joined: Sat May 23, 2009 4:49 pm
- Hardware configuration: eVga x299 DARK 2070 Super, eVGA 2080, eVga 1070, eVga 2080 Super
MSI x399 eVga 2080, eVga 1070, eVga 1070, GT970 - Location: Mississippi near Memphis, Tn
Re: Failed to send - 34.72.228.44
Seems to have been fixed. All 3 units sent.
Tks
Tks
I'm folding because Dec 2005 I had radical prostate surgery.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
Lost brother to spinal cancer, brother-in-law to prostate cancer.
Several 1st cousins lost and a few who have survived.
-
- Posts: 363
- Joined: Tue Feb 12, 2008 7:33 am
- Hardware configuration: Running exclusively Linux headless blades. All are dedicated crunching machines.
- Location: SE Michigan, USA
Re: Failed to send - 34.72.228.44
Thanks - Successful upload
Code: Select all
15:44:28:WU01:FS01:Sending unit results: id:01 state:SEND error:NO_ERROR project:18124 run:4 clone:10 gen:618 core:0x22 unit:0x0000000a0000026a000046cc00000004
15:44:28:WU01:FS01:Uploading 10.56MiB to 34.72.228.44
15:44:28:WU01:FS01:Connecting to 34.72.228.44:8080
15:44:34:WU01:FS01:Upload 29.59%
15:44:40:WU01:FS01:Upload 61.54%
15:44:46:WU01:FS01:Upload 92.31%
15:44:51:WU01:FS01:Upload complete
15:44:51:WU01:FS01:Server responded WORK_ACK (400)
15:44:51:WU01:FS01:Final credit estimate, 38565.00 points
15:44:51:WU01:FS01:Cleaning up
Re: Failed to send - 34.72.228.44
34.72.228.44 Not excepting uploads since before 6pm yesterday, CS is down too!
Tons of WU's hung in a loop eating away at my bandwidth trying to upload gets to 88% and fails.
Please fix or reboot the servers or who ever tripped over the cord please plug it back in lol
Tons of WU's hung in a loop eating away at my bandwidth trying to upload gets to 88% and fails.
Please fix or reboot the servers or who ever tripped over the cord please plug it back in lol
-
- Site Admin
- Posts: 7927
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Failed to send - 34.72.228.44
The server status page shows it out of space, I will try to get someone to check on it and get some space freed up.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Re: Failed to send - 34.72.228.44
Thanks, Joe.
Re: Failed to send - 34.72.228.44
toTOW already alerted the researcher yesterday. I guess with Christmas chances are low things are fixed before Monday or Tuesday
Ryzen 5800X / RTX 4090 / Windows 11
Ryzen 5600X / RTX 3070 Ti / Ubuntu 22.04
Ryzen 5600 / RTX 3060 Ti / Windows 11
Re: Failed to send - 34.72.228.44
About right it'd be the only server that has given me WU's to 10 video cards for the week.
I might as well delete them they will be dead by then anyways. Should have had over a 7 million point day yesterday.
I might as well delete them they will be dead by then anyways. Should have had over a 7 million point day yesterday.
-
- Site Admin
- Posts: 7927
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Failed to send - 34.72.228.44
Well, at least one person acknowledged getting the message. I just checked, the server is now listed as down, at least you won't go through uploading the WUs repeatedly to 80%. I don't know if that means they are clearing space and the server will be back up later or not.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Re: Failed to send - 34.72.228.44
Thanks for the update I will hold off another day or til it shows time up for return.
-
- Site Admin
- Posts: 7927
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: Failed to send - 34.72.228.44
I have seen one report that the WU they had waiting to upload to this server did get accepted to a CS. So possibly the network connections that needed to be working were fixed up. So possibly your WUs may have uploaded overnight. Credits may take until this WS is back up and the WUs transferred back to it from the CS.
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3