Win 10, v7.6.21 doesn't start
Moderators: Site Moderators, FAHC Science Team
Re: Win 10, v7.6.21 doesn't start
OpenCL: Not detected
looks like you need to reinstall the driver and reboot?
looks like you need to reinstall the driver and reboot?
-
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: Win 10, v7.6.21 doesn't start
Also, by default when this shows:
1:09:02:Enabled folding slot 00: PAUSED cpu:2 (not configured)
The client will wait for (not configured) to allow the donor to configure their client. If you don't it will wait and then start contributing anonymously.
1:09:02:Enabled folding slot 00: PAUSED cpu:2 (not configured)
The client will wait for (not configured) to allow the donor to configure their client. If you don't it will wait and then start contributing anonymously.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
- Posts: 12
- Joined: Tue Nov 03, 2020 11:03 pm
Re: Win 10, v7.6.21 doesn't start
nvidia drivers reinstalled, will reboot shortly. Other test says "no". But I will now reboot and reinstall .21.
-
- Posts: 12
- Joined: Tue Nov 03, 2020 11:03 pm
Re: Win 10, v7.6.21 doesn't start
nope, no dice. Everything was fine until last week or so.
So far, then:
v 7.6.21_x86 tested - nothing, installs, starts when pushed to do so by command line, but dies after "GPUs.txt". -v does not help.
v 7.5.1_x86 tested. Gives a far more thorough logfile, but still does nothing.
NVidia drivers - 456.71 - are reinstalled. These were initially installed mid-October and this is the same file for installation.
There's no registry entries? I couldn't find any.
Always with the same user. I have tried creating a local user and logging in as them, installing... no difference. Installing the service - it won't start.
I'm out of ideas at this point and my office is freezing as I've turned the heat down to cope with the machine being on most of the time....any thoughts welcome.
So far, then:
v 7.6.21_x86 tested - nothing, installs, starts when pushed to do so by command line, but dies after "GPUs.txt". -v does not help.
v 7.5.1_x86 tested. Gives a far more thorough logfile, but still does nothing.
NVidia drivers - 456.71 - are reinstalled. These were initially installed mid-October and this is the same file for installation.
There's no registry entries? I couldn't find any.
Always with the same user. I have tried creating a local user and logging in as them, installing... no difference. Installing the service - it won't start.
I'm out of ideas at this point and my office is freezing as I've turned the heat down to cope with the machine being on most of the time....any thoughts welcome.
Re: Win 10, v7.6.21 doesn't start
Just curious, if you run the task manager do you see any fah* process running that may have been started by hideconsole in the startup group? Or anything in services that could interfere with the command line starting? Just thinking out loud.
-
- Posts: 5
- Joined: Tue Nov 03, 2020 8:58 am
Re: Win 10, v7.6.21 doesn't start
Sorry for the late answer, I though I activated email notification but obviously, I did not
I did uninstall everything data included but no joy.
My symptoms are exactly the same as bretti_kivi.
I don't see any fah* process
I did uninstall everything data included but no joy.
My symptoms are exactly the same as bretti_kivi.
I don't see any fah* process
Re: Win 10, v7.6.21 doesn't start
Code: Select all
21:08:59: OS: Windows 10 Enterprise
21:08:59: OS Arch: AMD64
21:08:59: GPUs: 1
21:08:59: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:5 GM204 [GeForce GTX 980] 4612
21:08:59:CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:5.2 Driver:11.1
21:08:59: OpenCL: Not detected
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
- Posts: 5
- Joined: Tue Nov 03, 2020 8:58 am
Re: Win 10, v7.6.21 doesn't start
I installed NVidia 457.09 and start FaH and it works!
-
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: Win 10, v7.6.21 doesn't start
Please note that as per the EULA, you would need permission (generally written) from the people who are allowed to make decisions on what is allowed or not to run on work systems. It can be your manager, internal IT, CISO, etc.bretti_kivi wrote:...my office is freezing as I've turned the heat down to cope with the machine being on most of the time....any thoughts welcome.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
- Posts: 12
- Joined: Tue Nov 03, 2020 11:03 pm
Re: Win 10, v7.6.21 doesn't start
this is my office at home and it's my personal machine
I am beginning to despise Nvidia and graphics drivers generally. I will go get the newest Nvidia - seems to be 457.30, released Monday - and update and see what happens.
I am beginning to despise Nvidia and graphics drivers generally. I will go get the newest Nvidia - seems to be 457.30, released Monday - and update and see what happens.
-
- Posts: 12
- Joined: Tue Nov 03, 2020 11:03 pm
Re: Win 10, v7.6.21 doesn't start
no, no change. v 20 found and downloaded and tested - nope.
I will go find a much earlier release of the 7.6 branch and test that.
I will go find a much earlier release of the 7.6 branch and test that.
-
- Posts: 12
- Joined: Tue Nov 03, 2020 11:03 pm
Re: Win 10, v7.6.21 doesn't start
but first I decided to go digging. And lo and behold, there's an error message stashed away in Event Viewer, highlightin igdrcl32.dll as a source of the problem.
What's that? one of the DLLs for the Onboard UHD 630 Graphics. In other words, the onboard graphics driver seems to be getting in the way. Why? I have no idea. I will reboot again now and see what happens.
What's that? one of the DLLs for the Onboard UHD 630 Graphics. In other words, the onboard graphics driver seems to be getting in the way. Why? I have no idea. I will reboot again now and see what happens.
-
- Posts: 12
- Joined: Tue Nov 03, 2020 11:03 pm
Re: Win 10, v7.6.21 doesn't start
works. Now to configure properly...
Re: Win 10, v7.6.21 doesn't start
great job! some versions of cliens started tested the feasibility of the onboard graphics if i'm remembering correctly. The advised method of dealing with this is to leave the UHD slot permanently on paused.
-
- Posts: 68
- Joined: Sun Feb 12, 2012 11:43 am
- Hardware configuration: Corsair Obsidian 750D Windows Airflow Edition
Intel Core i9 Extreme 7980XE @ 2.6 GHz (18 cores, 36 threads)
64 GB Corsair Dominator Platinum DDR4 RAM
2x Nvidia Titan RTX (NVLink Enabled) (Nvidia 526.98 Studio Driver)
Asus Rampage VI APEX (BIOS 1401)(Intel X299 Chipset)
Corsair AX1600i Titanium Plus Power Supply
Corsair Neutron NX500 800GB SSD (System Drive)
Seagate SkyHawk 10 TB , 256 MB Cache (Data Drive)
Creative Sound BlasterX AE-5 Plus Pure Edition
Dell UP3218K and Dell U2711
Windows 11 Pro for Workstations 64 Bit (Version 22H2) - Location: Ireland
Re: Win 10, v7.6.21 doesn't start
Thanks PantherX. I actually prefer this CLI mode. v7.6.21 is working perfectly for me with Windows 10 when FAHClient is used in CLI mode.PantherX wrote:Assuming a fresh installation of the latest version, this is what I would expect:
FAHClient can run in CLI mode (the GUI version is FAHControl).
My Folding@Home statistics page:
http://folding.extremeoverclocking.com/ ... =&u=565609
http://folding.extremeoverclocking.com/ ... =&u=565609