Waiting for work on 192.0.2.1 ?

Moderators: Site Moderators, FAHC Science Team

Post Reply
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Waiting for work on 192.0.2.1 ?

Post by bruce »

the message I was looking for was OpenCL: Not detected: Failed to open dynamic library . The solution to your problem is to reinsstall the linux OpenCL code.
Apparently that code got removed from many systems during the night. (where "night" is defined by this post:)
DocJonz wrote:The second box of code above shows it started about 03:51 (BST), so maybe someone working late on Friday at the US end has inadvertently glitched something?
I'm still narrowing down my search for answers to what/who might have glitched something on both Windows and Linux systems.

If somebody thinks whatever the're doing might glitch something, there is no perfect time to minimize the impact (but 03:51 BST is as good as any... although a lot of the USA is still active then.)
Top
TurboAsterix
Posts: 9
Joined: Sun Aug 02, 2020 12:46 pm

Re: Waiting for work on 192.0.2.1 ?

Post by TurboAsterix »

Hello Bruce,
bruce wrote:the message I was looking for was OpenCL: Not detected: Failed to open dynamic library . The solution to your problem is to reinsstall the linux OpenCL code.

Apparently that code got removed from many systems during the night.
This is what we are trying to tell you, it got not removed. In my case it was never there. And additionally my Linux is not installing any auto-updates. My logs files show that OpenCL was not working e.g. on 30th June, but still the CPU and GPU slots folded and both returned work units before it came to the sudden stop on 1st August.

User ZePompom tried to tell as well it clearly worked without OpenCL before.

Code: Select all

*********************** Log Started 2020-06-30T06:10:34Z ***********************
06:10:34:Enabled folding slot 00: PAUSED cpu:3 (by user)
06:10:36:Enabled folding slot 01: PAUSED gpu:0:GP108 [GeForce GT 1030] (by user)
06:10:36:****************************** FAHClient ******************************
06:10:36:      Version: 7.6.13
06:10:36:******************************* System ********************************
06:10:36:      OS Arch: AMD64
06:10:36:         GPUs: 1
06:10:36:        GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:5 GP108 [GeForce GT 1030]
06:10:36:CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:6.1 Driver:10.2
06:10:36:       OpenCL: Not detected: Failed to open dynamic library 'libOpenCL.so':
06:10:36:               libOpenCL.so: cannot open shared object file: No such file or
06:10:36:               directory

06:33:56:FS00:Unpaused
06:33:56:FS01:Unpaused

08:49:05:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
15:49:07:WU01:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
Top
ajm
Posts: 750
Joined: Sat Mar 21, 2020 5:22 am
Location: Lucerne, Switzerland

Re: Waiting for work on 192.0.2.1 ?

Post by ajm »

Indeed, according to the log, OpenCL was not detected at 06:10:36 (June 30th, while the slot was paused) and nevertheless, after unpausing at 06:33:56, the server 3.133.76.19 (after a few failed connections to 18.188.125.154) sent a GPU WU at 06:38:21 and this WU was successfully folded: https://apps.foldingathome.org/wu#proje ... 837&gen=19

But is this simply possible? Can a GPU fold without OpenCL installed?
Top
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Waiting for work on 192.0.2.1 ?

Post by Joe_H »

ajm wrote:But is this simply possible? Can a GPU fold without OpenCL installed?
From prior reports, it can, but not really. What there is a system that is folding with enough of the OpenCL support present, but not the specific library(s) checked for by the client. Or they are there, but not accessible by the client.

To give this some context, in theory all that should be needed is the driver and the OpenCL runtime support for that AMD or nVidia GPU. In practice what people have been finding in the past is that the driver installation packages for Linux have left unresolved links and other problems. Installing the dev-kit packages have appeared to fix those up.

Recent versions of Linux have added additional requirements for some such as the user that folding is running under needing to be part of the video and/or render groups to access the GPU and its support files.

So, not sure what has broken this time, but there are a lot of places where something apparently minor could change and cause problems.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Top
TurboAsterix
Posts: 9
Joined: Sun Aug 02, 2020 12:46 pm

Re: Waiting for work on 192.0.2.1 ?

Post by TurboAsterix »

Thanks for the comment.
To me it just looks alike, that certain OpenCL functions were utilized and probably accidentally working.
Whatever changed from about 1st August, might use other OpenCL functions that are not properly working and installing the dev kit fixed that.

Would be interesting to see if there is a dip in total of returned GPU WUs around this date or if we here in the thread are just rare exceptions (which is what I am thinking right now).
Top
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Waiting for work on 192.0.2.1 ?

Post by JimboPalmer »

I suggested a change in GPUs.txt and it seems there was no change.

So far everyone is on Nvidia?

Has anyone gone back a Nvidia Driver version? (Current driver is 451.67, there is a 'hotfix' of 451.85) Has anyone tried a previous Client version? (current is 7.6.13)
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Top
Jupis_folder
Posts: 27
Joined: Sun Aug 02, 2020 2:58 pm

Re: Waiting for work on 192.0.2.1 ?

Post by Jupis_folder »

Installing the dev package of opencl just changes the message into

Code: Select all

OpenCL: Not detected: clGetDeviceIDs() returned -1
So the next question is now: What to do to clGetDeviceIDs() return a device?
I am on Nvidia, driver version is 440.100
Top
foldingfanmucde
Posts: 18
Joined: Sat Aug 01, 2020 10:26 am
Hardware configuration: 1. AMD Ryzen 9 3900X / 64GB RAM / 2x NVIDIA RTX 2080 Ti / Win10 64 Pro / F@H 7.6.13 / ~6-8M PPD /
2. Intel Core i7 4790K / 32GB RAM / 1x AMD RX 5700 XT / Win10 64 Pro / F@H 7.6.21 / ~1-1.5M PPD /
Location: Munich, Germany

Re: Waiting for work on 192.0.2.1 ?

Post by foldingfanmucde »

JimboPalmer wrote: .... Has anyone gone back a Nvidia Driver version? ....
@JimboPalmer: When I was doing all the re-installing yesterday I reverted back to Nvidia legacy version 445.87 once for testing, but it did not improve anything (so I reinstalled the current version 451.67 and stayed with it since then - Win10 64). The hotfix version you mentioned is not available/offered for my GPUs 2080 Ti when searching at the Nvidia drivers site - even when showing all version types. I have not yet tried a previous F@H client version.
1. AMD Ryzen 9 3900X / 64GB RAM / 2x NVIDIA RTX 2080 Ti / Win10 64 Pro / F@H 7.6.13 / ~6-8M PPD /
2. Intel Core i7 4790K / 32GB RAM / 1x AMD RX 5700 XT / Win10 64 Pro / F@H 7.6.21 / ~1-1.5M PPD /
Top
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Waiting for work on 192.0.2.1 ?

Post by JimboPalmer »

So it is not the driver, either. Rats.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Top
zniper
Posts: 4
Joined: Fri Dec 30, 2016 10:24 am

gpu won't fold anymore

Post by zniper »

i have been folding for months on my 2070 super, but yesterday it stopped folding.

3900x is folding just fine but both my gpus are trying to get assignments from server 192.0.2.1.

cpu: 3900x
gpu1: 2070 super
gpu2: 1070

manjaro linux

Code: Select all

*********************** Log Started 2020-08-02T21:18:06Z ***********************
21:18:06:Trying to access database...
21:18:06:Successfully acquired database lock
21:18:06:Read GPUs.txt
21:18:06:Enabled folding slot 00: READY cpu:23
21:18:06:Enabled folding slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218
21:18:06:****************************** FAHClient ******************************
21:18:06:      Version: 7.6.13
21:18:06:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
21:18:06:    Copyright: 2020 foldingathome.org
21:18:06:     Homepage: https://foldingathome.org/
21:18:06:         Date: Apr 28 2020
21:18:06:         Time: 04:20:16
21:18:06:     Revision: 5a652817f46116b6e135503af97f18e094414e3b
21:18:06:       Branch: master
21:18:06:     Compiler: GNU 8.3.0
21:18:06:      Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:06:               -fno-pie
21:18:06:     Platform: linux2 4.19.0-5-amd64
21:18:06:         Bits: 64
21:18:06:         Mode: Release
21:18:06:         Args: --config /etc/foldingathome/config.xml --log
21:18:06:               /var/log/foldingathome/log.txt --log-rotate-dir
21:18:06:               /var/log/foldingathome
21:18:06:       Config: /etc/foldingathome/config.xml
21:18:06:******************************** CBang ********************************
21:18:06:         Date: Apr 25 2020
21:18:06:         Time: 00:07:53
21:18:06:     Revision: ea081a3b3b0f4a37c4d0440b4f1bc184197c7797
21:18:06:       Branch: master
21:18:06:     Compiler: GNU 8.3.0
21:18:06:      Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:06:               -fno-pie -fPIC
21:18:06:     Platform: linux2 4.19.0-5-amd64
21:18:06:         Bits: 64
21:18:06:         Mode: Release
21:18:06:******************************* System ********************************
21:18:06:          CPU: AMD Ryzen 9 3900X 12-Core Processor
21:18:06:       CPU ID: AuthenticAMD Family 23 Model 113 Stepping 0
21:18:06:         CPUs: 24
21:18:06:       Memory: 31.34GiB
21:18:06:  Free Memory: 27.57GiB
21:18:06:      Threads: POSIX_THREADS
21:18:06:   OS Version: 5.7
21:18:06:  Has Battery: false
21:18:06:   On Battery: false
21:18:06:   UTC Offset: 2
21:18:06:          PID: 2966
21:18:06:          CWD: /var/lib/private/fah
21:18:06:           OS: Linux 5.7.9-1-MANJARO x86_64
21:18:06:      OS Arch: AMD64
21:18:06:         GPUs: 2
21:18:06:        GPU 0: Bus:10 Slot:0 Func:0 NVIDIA:8 TU104 [GeForce RTX 2070 SUPER] 8218
21:18:06:        GPU 1: Bus:11 Slot:0 Func:0 NVIDIA:7 GP104 [GeForce GTX 1070] 6463
21:18:06:CUDA Device 0: Platform:0 Device:0 Bus:10 Slot:0 Compute:7.5 Driver:10.2
21:18:06:CUDA Device 1: Platform:0 Device:1 Bus:11 Slot:0 Compute:6.1 Driver:10.2
21:18:06:       OpenCL: Not detected: clGetDeviceIDs() returned -1
21:18:06:******************************* libFAH ********************************
21:18:06:         Date: Apr 15 2020
21:18:06:         Time: 21:43:24
21:18:06:     Revision: 216968bc7025029c841ed6e36e81a03a316890d3
21:18:06:       Branch: master
21:18:06:     Compiler: GNU 8.3.0
21:18:06:      Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:06:               -fno-pie
21:18:06:     Platform: linux2 4.19.0-5-amd64
21:18:06:         Bits: 64
21:18:06:         Mode: Release
21:18:06:***********************************************************************
21:18:06:<config>
21:18:06:  <!-- Folding Core -->
21:18:06:  <core-priority v='low'/>
21:18:06:
21:18:06:  <!-- Folding Slot Configuration -->
21:18:06:  <client-type v='beta'/>
21:18:06:
21:18:06:  <!-- Network -->
21:18:06:  <proxy v=':8080'/>
21:18:06:
21:18:06:  <!-- Slot Control -->
21:18:06:  <pause-on-battery v='false'/>
21:18:06:  <power v='full'/>
21:18:06:
21:18:06:  <!-- User Information -->
21:18:06:  <passkey v='*****'/>
21:18:06:  <team v='37651'/>
21:18:06:  <user v='zniper'/>
21:18:06:
21:18:06:  <!-- Work Unit Control -->
21:18:06:  <next-unit-percentage v='100'/>
21:18:06:
21:18:06:  <!-- Folding Slots -->
21:18:06:  <slot id='0' type='CPU'/>
21:18:06:  <slot id='1' type='GPU'/>
21:18:06:</config>
21:18:06:WU02:FS00:Starting
21:18:06:WU02:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/private/fah/cores/cores.foldingathome.org/lin/64bit-avx-256/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 02 -suffix 01 -version 706 -lifeline 2966 -checkpoint 15 -np 23
21:18:06:WU02:FS00:Started FahCore on PID 3012
21:18:06:WU02:FS00:Core PID:3016
21:18:06:WU02:FS00:FahCore 0xa7 started
21:18:06:WU00:FS01:Connecting to assign1.foldingathome.org:80
21:18:06:WU02:FS00:0xa7:*********************** Log Started 2020-08-02T21:18:06Z ***********************
21:18:06:WU02:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
21:18:06:WU02:FS00:0xa7:       Type: 0xa7
21:18:06:WU02:FS00:0xa7:       Core: Gromacs
21:18:06:WU02:FS00:0xa7:       Args: -dir 02 -suffix 01 -version 706 -lifeline 3012 -checkpoint 15 -np
21:18:06:WU02:FS00:0xa7:             23
21:18:06:WU02:FS00:0xa7:************************************ CBang *************************************
21:18:06:WU02:FS00:0xa7:       Date: Nov 27 2019
21:18:06:WU02:FS00:0xa7:       Time: 11:26:54
21:18:06:WU02:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
21:18:06:WU02:FS00:0xa7:     Branch: master
21:18:06:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
21:18:06:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:06:WU02:FS00:0xa7:             -fno-pie -fPIC
21:18:06:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
21:18:06:WU02:FS00:0xa7:       Bits: 64
21:18:06:WU02:FS00:0xa7:       Mode: Release
21:18:06:WU02:FS00:0xa7:************************************ System ************************************
21:18:06:WU02:FS00:0xa7:        CPU: AMD Ryzen 9 3900X 12-Core Processor
21:18:06:WU02:FS00:0xa7:     CPU ID: AuthenticAMD Family 23 Model 113 Stepping 0
21:18:06:WU02:FS00:0xa7:       CPUs: 24
21:18:06:WU02:FS00:0xa7:     Memory: 31.34GiB
21:18:06:WU02:FS00:0xa7:Free Memory: 27.51GiB
21:18:06:WU02:FS00:0xa7:    Threads: POSIX_THREADS
21:18:06:WU02:FS00:0xa7: OS Version: 5.7
21:18:06:WU02:FS00:0xa7:Has Battery: false
21:18:06:WU02:FS00:0xa7: On Battery: false
21:18:06:WU02:FS00:0xa7: UTC Offset: 2
21:18:06:WU02:FS00:0xa7:        PID: 3016
21:18:06:WU02:FS00:0xa7:        CWD: /var/lib/private/fah/work
21:18:06:WU02:FS00:0xa7:******************************** Build - libFAH ********************************
21:18:06:WU02:FS00:0xa7:    Version: 0.0.19
21:18:06:WU02:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
21:18:06:WU02:FS00:0xa7:  Copyright: 2019 foldingathome.org
21:18:06:WU02:FS00:0xa7:   Homepage: https://foldingathome.org/
21:18:06:WU02:FS00:0xa7:       Date: Nov 26 2019
21:18:06:WU02:FS00:0xa7:       Time: 00:41:42
21:18:06:WU02:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
21:18:06:WU02:FS00:0xa7:     Branch: master
21:18:06:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
21:18:06:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:06:WU02:FS00:0xa7:             -fno-pie
21:18:06:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
21:18:06:WU02:FS00:0xa7:       Bits: 64
21:18:06:WU02:FS00:0xa7:       Mode: Release
21:18:06:WU02:FS00:0xa7:************************************ Build *************************************
21:18:06:WU02:FS00:0xa7:       SIMD: avx_256
21:18:06:WU02:FS00:0xa7:********************************************************************************
21:18:06:WU02:FS00:0xa7:Project: 14833 (Run 327, Clone 0, Gen 234)
21:18:06:WU02:FS00:0xa7:Unit: 0x000000ee455e42075ef0d57baf38cbcc
21:18:06:WU02:FS00:0xa7:Digital signatures verified
21:18:06:WU02:FS00:0xa7:Reducing thread count from 23 to 22 to avoid domain decomposition by a prime number > 3
21:18:06:WU02:FS00:0xa7:Reducing thread count from 22 to 21 to avoid domain decomposition with large prime factor 11
21:18:06:WU02:FS00:0xa7:Calling: mdrun -s frame234.tpr -o frame234.trr -cpi state.cpt -cpt 15 -nt 21
21:18:06:WU02:FS00:0xa7:Steps: first=0 total=250000
21:18:07:WU02:FS00:0xa7:Completed 32364 out of 250000 steps (12%)
21:18:07:WU00:FS01:Assigned to work server 192.0.2.1
21:18:07:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
21:18:07:WU00:FS01:Connecting to 192.0.2.1:8080
21:18:08:WU02:FS00:0xa7:Completed 32500 out of 250000 steps (13%)
21:18:33:WU02:FS00:0xa7:Completed 35000 out of 250000 steps (14%)
21:18:44:Removing old file 'configs/config-20200801-223944.xml'
21:18:44:Saving configuration to /etc/foldingathome/config.xml
21:18:44:<config>
21:18:44:  <!-- Folding Core -->
21:18:44:  <core-priority v='low'/>
21:18:44:
21:18:44:  <!-- Folding Slot Configuration -->
21:18:44:  <client-type v='beta'/>
21:18:44:
21:18:44:  <!-- Network -->
21:18:44:  <proxy v=':8080'/>
21:18:44:
21:18:44:  <!-- Slot Control -->
21:18:44:  <pause-on-battery v='false'/>
21:18:44:  <power v='full'/>
21:18:44:
21:18:44:  <!-- User Information -->
21:18:44:  <passkey v='*****'/>
21:18:44:  <team v='37651'/>
21:18:44:  <user v='zniper'/>
21:18:44:
21:18:44:  <!-- Work Unit Control -->
21:18:44:  <next-unit-percentage v='100'/>
21:18:44:
21:18:44:  <!-- Folding Slots -->
21:18:44:  <slot id='0' type='CPU'/>
21:18:44:</config>
21:18:44:FS00:Shutting core down
21:18:45:WU02:FS00:0xa7:Caught signal SIGINT(2) on PID 3016
21:18:45:WU02:FS00:0xa7:Exiting, please wait. . .
21:18:45:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
21:18:45:WU02:FS00:Starting
21:18:45:WARNING:WU02:FS00:Changed SMP threads from 23 to 24 this can cause some work units to fail
21:18:45:WARNING:WU02:FS00:AS lowered CPUs from 24 to 23
21:18:45:WU02:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/private/fah/cores/cores.foldingathome.org/lin/64bit-avx-256/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 02 -suffix 01 -version 706 -lifeline 2966 -checkpoint 15 -np 23
21:18:45:WU02:FS00:Started FahCore on PID 3055
21:18:45:WU02:FS00:Core PID:3059
21:18:45:WU02:FS00:FahCore 0xa7 started
21:18:46:WU02:FS00:0xa7:*********************** Log Started 2020-08-02T21:18:45Z ***********************
21:18:46:WU02:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
21:18:46:WU02:FS00:0xa7:       Type: 0xa7
21:18:46:WU02:FS00:0xa7:       Core: Gromacs
21:18:46:WU02:FS00:0xa7:       Args: -dir 02 -suffix 01 -version 706 -lifeline 3055 -checkpoint 15 -np
21:18:46:WU02:FS00:0xa7:             23
21:18:46:WU02:FS00:0xa7:************************************ CBang *************************************
21:18:46:WU02:FS00:0xa7:       Date: Nov 27 2019
21:18:46:WU02:FS00:0xa7:       Time: 11:26:54
21:18:46:WU02:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
21:18:46:WU02:FS00:0xa7:     Branch: master
21:18:46:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
21:18:46:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:46:WU02:FS00:0xa7:             -fno-pie -fPIC
21:18:46:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
21:18:46:WU02:FS00:0xa7:       Bits: 64
21:18:46:WU02:FS00:0xa7:       Mode: Release
21:18:46:WU02:FS00:0xa7:************************************ System ************************************
21:18:46:WU02:FS00:0xa7:        CPU: AMD Ryzen 9 3900X 12-Core Processor
21:18:46:WU02:FS00:0xa7:     CPU ID: AuthenticAMD Family 23 Model 113 Stepping 0
21:18:46:WU02:FS00:0xa7:       CPUs: 24
21:18:46:WU02:FS00:0xa7:     Memory: 31.34GiB
21:18:46:WU02:FS00:0xa7:Free Memory: 27.48GiB
21:18:46:WU02:FS00:0xa7:    Threads: POSIX_THREADS
21:18:46:WU02:FS00:0xa7: OS Version: 5.7
21:18:46:WU02:FS00:0xa7:Has Battery: false
21:18:46:WU02:FS00:0xa7: On Battery: false
21:18:46:WU02:FS00:0xa7: UTC Offset: 2
21:18:46:WU02:FS00:0xa7:        PID: 3059
21:18:46:WU02:FS00:0xa7:        CWD: /var/lib/private/fah/work
21:18:46:WU02:FS00:0xa7:******************************** Build - libFAH ********************************
21:18:46:WU02:FS00:0xa7:    Version: 0.0.19
21:18:46:WU02:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
21:18:46:WU02:FS00:0xa7:  Copyright: 2019 foldingathome.org
21:18:46:WU02:FS00:0xa7:   Homepage: https://foldingathome.org/
21:18:46:WU02:FS00:0xa7:       Date: Nov 26 2019
21:18:46:WU02:FS00:0xa7:       Time: 00:41:42
21:18:46:WU02:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
21:18:46:WU02:FS00:0xa7:     Branch: master
21:18:46:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
21:18:46:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:18:46:WU02:FS00:0xa7:             -fno-pie
21:18:46:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
21:18:46:WU02:FS00:0xa7:       Bits: 64
21:18:46:WU02:FS00:0xa7:       Mode: Release
21:18:46:WU02:FS00:0xa7:************************************ Build *************************************
21:18:46:WU02:FS00:0xa7:       SIMD: avx_256
21:18:46:WU02:FS00:0xa7:********************************************************************************
21:18:46:WU02:FS00:0xa7:Project: 14833 (Run 327, Clone 0, Gen 234)
21:18:46:WU02:FS00:0xa7:Unit: 0x000000ee455e42075ef0d57baf38cbcc
21:18:46:WU02:FS00:0xa7:Digital signatures verified
21:18:46:WU02:FS00:0xa7:Reducing thread count from 23 to 22 to avoid domain decomposition by a prime number > 3
21:18:46:WU02:FS00:0xa7:Reducing thread count from 22 to 21 to avoid domain decomposition with large prime factor 11
21:18:46:WU02:FS00:0xa7:Calling: mdrun -s frame234.tpr -o frame234.trr -cpi state.cpt -cpt 15 -nt 21
21:18:46:WU02:FS00:0xa7:Steps: first=0 total=250000
21:18:46:WU02:FS00:0xa7:Completed 36159 out of 250000 steps (14%)
21:18:59:WU02:FS00:0xa7:Completed 37500 out of 250000 steps (15%)
21:19:07:Removing old file 'configs/config-20200802-074618.xml'
21:19:07:Saving configuration to /etc/foldingathome/config.xml
21:19:07:<config>
21:19:07:  <!-- Folding Core -->
21:19:07:  <core-priority v='low'/>
21:19:07:
21:19:07:  <!-- Folding Slot Configuration -->
21:19:07:  <client-type v='beta'/>
21:19:07:
21:19:07:  <!-- Network -->
21:19:07:  <proxy v=':8080'/>
21:19:07:
21:19:07:  <!-- Slot Control -->
21:19:07:  <pause-on-battery v='false'/>
21:19:07:  <power v='full'/>
21:19:07:
21:19:07:  <!-- User Information -->
21:19:07:  <passkey v='*****'/>
21:19:07:  <team v='37651'/>
21:19:07:  <user v='zniper'/>
21:19:07:
21:19:07:  <!-- Work Unit Control -->
21:19:07:  <next-unit-percentage v='100'/>
21:19:07:
21:19:07:  <!-- Folding Slots -->
21:19:07:  <slot id='0' type='CPU'/>
21:19:07:</config>
21:19:08:Adding folding slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218
21:19:08:Removing old file 'configs/config-20200802-074627.xml'
21:19:08:Saving configuration to /etc/foldingathome/config.xml
21:19:08:<config>
21:19:08:  <!-- Folding Core -->
21:19:08:  <core-priority v='low'/>
21:19:08:
21:19:08:  <!-- Folding Slot Configuration -->
21:19:08:  <client-type v='beta'/>
21:19:08:
21:19:08:  <!-- Network -->
21:19:08:  <proxy v=':8080'/>
21:19:08:
21:19:08:  <!-- Slot Control -->
21:19:08:  <pause-on-battery v='false'/>
21:19:08:  <power v='full'/>
21:19:08:
21:19:08:  <!-- User Information -->
21:19:08:  <passkey v='*****'/>
21:19:08:  <team v='37651'/>
21:19:08:  <user v='zniper'/>
21:19:08:
21:19:08:  <!-- Work Unit Control -->
21:19:08:  <next-unit-percentage v='100'/>
21:19:08:
21:19:08:  <!-- Folding Slots -->
21:19:08:  <slot id='0' type='CPU'/>
21:19:08:  <slot id='1' type='GPU'/>
21:19:08:</config>
21:19:08:FS00:Shutting core down
21:19:08:WU02:FS00:0xa7:Caught signal SIGINT(2) on PID 3059
21:19:08:WU02:FS00:0xa7:Exiting, please wait. . .
21:19:08:WU01:FS01:Connecting to assign1.foldingathome.org:80
21:19:08:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
21:19:09:WU01:FS01:Assigned to work server 192.0.2.1
21:19:09:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
21:19:09:WU01:FS01:Connecting to 192.0.2.1:8080
21:19:45:WU02:FS00:Starting
21:19:45:WARNING:WU02:FS00:Changed SMP threads from 24 to 23 this can cause some work units to fail
21:19:45:WU02:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/private/fah/cores/cores.foldingathome.org/lin/64bit-avx-256/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 02 -suffix 01 -version 706 -lifeline 2966 -checkpoint 15 -np 23
21:19:45:WU02:FS00:Started FahCore on PID 3092
21:19:45:WU02:FS00:Core PID:3096
21:19:45:WU02:FS00:FahCore 0xa7 started
21:19:46:WU02:FS00:0xa7:*********************** Log Started 2020-08-02T21:19:45Z ***********************
21:19:46:WU02:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
21:19:46:WU02:FS00:0xa7:       Type: 0xa7
21:19:46:WU02:FS00:0xa7:       Core: Gromacs
21:19:46:WU02:FS00:0xa7:       Args: -dir 02 -suffix 01 -version 706 -lifeline 3092 -checkpoint 15 -np
21:19:46:WU02:FS00:0xa7:             23
21:19:46:WU02:FS00:0xa7:************************************ CBang *************************************
21:19:46:WU02:FS00:0xa7:       Date: Nov 27 2019
21:19:46:WU02:FS00:0xa7:       Time: 11:26:54
21:19:46:WU02:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
21:19:46:WU02:FS00:0xa7:     Branch: master
21:19:46:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
21:19:46:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:19:46:WU02:FS00:0xa7:             -fno-pie -fPIC
21:19:46:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
21:19:46:WU02:FS00:0xa7:       Bits: 64
21:19:46:WU02:FS00:0xa7:       Mode: Release
21:19:46:WU02:FS00:0xa7:************************************ System ************************************
21:19:46:WU02:FS00:0xa7:        CPU: AMD Ryzen 9 3900X 12-Core Processor
21:19:46:WU02:FS00:0xa7:     CPU ID: AuthenticAMD Family 23 Model 113 Stepping 0
21:19:46:WU02:FS00:0xa7:       CPUs: 24
21:19:46:WU02:FS00:0xa7:     Memory: 31.34GiB
21:19:46:WU02:FS00:0xa7:Free Memory: 27.45GiB
21:19:46:WU02:FS00:0xa7:    Threads: POSIX_THREADS
21:19:46:WU02:FS00:0xa7: OS Version: 5.7
21:19:46:WU02:FS00:0xa7:Has Battery: false
21:19:46:WU02:FS00:0xa7: On Battery: false
21:19:46:WU02:FS00:0xa7: UTC Offset: 2
21:19:46:WU02:FS00:0xa7:        PID: 3096
21:19:46:WU02:FS00:0xa7:        CWD: /var/lib/private/fah/work
21:19:46:WU02:FS00:0xa7:******************************** Build - libFAH ********************************
21:19:46:WU02:FS00:0xa7:    Version: 0.0.19
21:19:46:WU02:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
21:19:46:WU02:FS00:0xa7:  Copyright: 2019 foldingathome.org
21:19:46:WU02:FS00:0xa7:   Homepage: https://foldingathome.org/
21:19:46:WU02:FS00:0xa7:       Date: Nov 26 2019
21:19:46:WU02:FS00:0xa7:       Time: 00:41:42
21:19:46:WU02:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
21:19:46:WU02:FS00:0xa7:     Branch: master
21:19:46:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
21:19:46:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
21:19:46:WU02:FS00:0xa7:             -fno-pie
21:19:46:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
21:19:46:WU02:FS00:0xa7:       Bits: 64
21:19:46:WU02:FS00:0xa7:       Mode: Release
21:19:46:WU02:FS00:0xa7:************************************ Build *************************************
21:19:46:WU02:FS00:0xa7:       SIMD: avx_256
21:19:46:WU02:FS00:0xa7:********************************************************************************
21:19:46:WU02:FS00:0xa7:Project: 14833 (Run 327, Clone 0, Gen 234)
21:19:46:WU02:FS00:0xa7:Unit: 0x000000ee455e42075ef0d57baf38cbcc
21:19:46:WU02:FS00:0xa7:Digital signatures verified
21:19:46:WU02:FS00:0xa7:Reducing thread count from 23 to 22 to avoid domain decomposition by a prime number > 3
21:19:46:WU02:FS00:0xa7:Reducing thread count from 22 to 21 to avoid domain decomposition with large prime factor 11
21:19:46:WU02:FS00:0xa7:Calling: mdrun -s frame234.tpr -o frame234.trr -cpi state.cpt -cpt 15 -nt 21
21:19:46:WU02:FS00:0xa7:Steps: first=0 total=250000
21:19:46:WU02:FS00:0xa7:Completed 38300 out of 250000 steps (15%)
21:20:06:WU02:FS00:0xa7:Completed 40000 out of 250000 steps (16%)
21:20:08:Removing old file 'configs/config-20200802-074642.xml'
21:20:08:Saving configuration to /etc/foldingathome/config.xml
21:20:08:<config>
21:20:08:  <!-- Folding Core -->
21:20:08:  <core-priority v='low'/>
21:20:08:
21:20:08:  <!-- Folding Slot Configuration -->
21:20:08:  <client-type v='beta'/>
21:20:08:
21:20:08:  <!-- Network -->
21:20:08:  <proxy v=':8080'/>
21:20:08:
21:20:08:  <!-- Slot Control -->
21:20:08:  <pause-on-battery v='false'/>
21:20:08:  <power v='full'/>
21:20:08:
21:20:08:  <!-- User Information -->
21:20:08:  <passkey v='*****'/>
21:20:08:  <team v='37651'/>
21:20:08:  <user v='zniper'/>
21:20:08:
21:20:08:  <!-- Work Unit Control -->
21:20:08:  <next-unit-percentage v='100'/>
21:20:08:
21:20:08:  <!-- Folding Slots -->
21:20:08:  <slot id='0' type='CPU'/>
21:20:08:  <slot id='1' type='GPU'/>
21:20:08:</config>
21:20:17:WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80
21:20:17:WU00:FS01:Connecting to 192.0.2.1:80
21:20:31:WU02:FS00:0xa7:Completed 42500 out of 250000 steps (17%)
21:20:57:WU02:FS00:0xa7:Completed 45000 out of 250000 steps (18%)
21:21:18:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
21:21:18:WU01:FS01:Connecting to 192.0.2.1:80
21:21:24:WU02:FS00:0xa7:Completed 47500 out of 250000 steps (19%)
21:21:50:WU02:FS00:0xa7:Completed 50000 out of 250000 steps (20%)
21:22:15:WU02:FS00:0xa7:Completed 52500 out of 250000 steps (21%)
21:22:27:ERROR:WU00:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
21:22:27:WU00:Slot ID 1 no longer exists and not yet downloaded, dumping
21:22:27:WU00:Cleaning up
21:22:41:WU02:FS00:0xa7:Completed 55000 out of 250000 steps (22%)
21:23:08:WU02:FS00:0xa7:Completed 57500 out of 250000 steps (23%)
21:23:28:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
21:23:28:WU01:FS01:Connecting to assign1.foldingathome.org:80
21:23:29:WU01:FS01:Assigned to work server 192.0.2.1
21:23:29:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
21:23:29:WU01:FS01:Connecting to 192.0.2.1:8080
21:23:33:WU02:FS00:0xa7:Completed 60000 out of 250000 steps (24%)
21:23:59:WU02:FS00:0xa7:Completed 62500 out of 250000 steps (25%)
21:24:23:WU02:FS00:0xa7:Completed 65000 out of 250000 steps (26%)
21:24:49:WU02:FS00:0xa7:Completed 67500 out of 250000 steps (27%)
21:25:14:WU02:FS00:0xa7:Completed 70000 out of 250000 steps (28%)
21:25:38:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
21:25:38:WU01:FS01:Connecting to 192.0.2.1:80
21:25:40:WU02:FS00:0xa7:Completed 72500 out of 250000 steps (29%)
21:26:06:WU02:FS00:0xa7:Completed 75000 out of 250000 steps (30%)
21:26:32:WU02:FS00:0xa7:Completed 77500 out of 250000 steps (31%)
21:26:57:WU02:FS00:0xa7:Completed 80000 out of 250000 steps (32%)
21:27:23:WU02:FS00:0xa7:Completed 82500 out of 250000 steps (33%)
21:27:48:ERROR:WU01:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection timed out
21:27:48:WU01:FS01:Connecting to assign1.foldingathome.org:80
21:27:48:WU02:FS00:0xa7:Completed 85000 out of 250000 steps (34%)
21:27:48:WU01:FS01:Assigned to work server 192.0.2.1
21:27:48:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
21:27:48:WU01:FS01:Connecting to 192.0.2.1:8080
21:28:13:WU02:FS00:0xa7:Completed 87500 out of 250000 steps (35%)
21:28:38:WU02:FS00:0xa7:Completed 90000 out of 250000 steps (36%)
21:29:04:WU02:FS00:0xa7:Completed 92500 out of 250000 steps (37%)
21:29:30:WU02:FS00:0xa7:Completed 95000 out of 250000 steps (38%)
21:29:56:WU02:FS00:0xa7:Completed 97500 out of 250000 steps (39%)
21:29:57:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
21:29:57:WU01:FS01:Connecting to 192.0.2.1:80
21:30:22:WU02:FS00:0xa7:Completed 100000 out of 250000 steps (40%)
21:30:47:WU02:FS00:0xa7:Completed 102500 out of 250000 steps (41%)
21:31:13:WU02:FS00:0xa7:Completed 105000 out of 250000 steps (42%)
21:31:39:WU02:FS00:0xa7:Completed 107500 out of 250000 steps (43%)
Last edited by Joe_H on Sun Aug 02, 2020 10:04 pm, edited 1 time in total.
Reason: merged with existing topic
Top
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:
Contact toTOW

Re: Waiting for work on 192.0.2.1 ?

Post by toTOW »

To Linux users : Is your user running FAHClient in the "video" group (or the equivalent for your distribution) ?
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Top
CarolusMagnus
Posts: 8
Joined: Sun Aug 02, 2020 9:36 pm
Hardware configuration: 1. Windows 7 pro 64 bits, Intel Core i7 4790K 4.4 GHz, 24 GB RAM, 512 GB SAMSUNG 860 PRO SSD, NVIDIA RTX 2070 SUPER from MSI (OC up to 1980 MHz)

2. Windows 7 pro 64 bits, AMD Phenom IIx4 3.8 GHz (OC from 3.5 GHz), 4 GB RAM, 256 GB SAMSUNG 850 PRO SSD, AMD RX580 8GB from MSI (OC @ 1400 MHz)
Location: 44 Derval, FRANCE

Re: Waiting for work on 192.0.2.1 ?

Post by CarolusMagnus »

Hi from France, same issue here.

My system - Windows 7 pro 64, 24GB RAM, Intel Core i7 4790K, NVIDIA RTX2070S - has been running for months without troubles, just stopped friday night,
trying endlessly to connect to 192.0.2.1.

I've reinstalled the latest NVIDIA drivers and FAH client, with no luck.

To check the availability of Open CL and CUDA , I've run GPUPI 3.3.3, it shows Open CL 1.2 and CUDA 11 are available and running; I could compute Pi using both.

My other PC - Windows7 pro 64, 4GB RAM, Phenom II x4, AMD RX580 runs without any issues.

Here's an extract of the log, more if needed:

Code: Select all

*********************** Log Started 2020-08-02T15:23:24Z ***********************
15:23:24:Trying to access database...
15:23:24:Read GPUs.txt
15:23:24:Enabled folding slot 00: READY cpu:7
15:23:24:Enabled folding slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218
15:23:24:****************************** FAHClient ******************************
15:23:24:      Version: 7.6.13
15:23:24:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
15:23:24:    Copyright: 2020 foldingathome.org
15:23:24:     Homepage: https://foldingathome.org/
15:23:24:         Date: Apr 27 2020
15:23:24:         Time: 21:21:01
15:23:24:     Revision: 5a652817f46116b6e135503af97f18e094414e3b
15:23:24:       Branch: master
15:23:24:     Compiler: Visual C++ 2008
15:23:24:      Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
15:23:24:     Platform: win32 10
15:23:24:         Bits: 32
15:23:24:         Mode: Release
15:23:24:         Args: --open-web-control
15:23:24:       Config: C:\Users\Charles\AppData\Roaming\FAHClient\config.xml
15:23:24:******************************** CBang ********************************
15:23:24:         Date: Apr 24 2020
15:23:24:         Time: 17:07:55
15:23:24:     Revision: ea081a3b3b0f4a37c4d0440b4f1bc184197c7797
15:23:24:       Branch: master
15:23:24:     Compiler: Visual C++ 2008
15:23:24:      Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
15:23:24:     Platform: win32 10
15:23:24:         Bits: 32
15:23:24:         Mode: Release
15:23:24:******************************* System ********************************
15:23:24:          CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
15:23:24:       CPU ID: GenuineIntel Family 6 Model 60 Stepping 3
15:23:24:         CPUs: 8
15:23:24:       Memory: 23.84GiB
15:23:24:  Free Memory: 18.12GiB
15:23:24:      Threads: WINDOWS_THREADS
15:23:24:   OS Version: 6.1
15:23:24:  Has Battery: false
15:23:24:   On Battery: false
15:23:24:   UTC Offset: 2
15:23:24:          PID: 6696
15:23:24:          CWD: C:\Users\Charles\AppData\Roaming\FAHClient
15:23:24:Win32 Service: false
15:23:24:           OS: Windows 7 Professional
15:23:24:      OS Arch: AMD64
15:23:24:         GPUs: 1
15:23:24:        GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:8 TU104 [GeForce RTX 2070 SUPER] 8218
15:23:24:CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:7.5 Driver:11.0
15:23:24:       OpenCL: Not detected: clGetDeviceIDs() returned -1
15:23:24:******************************* libFAH ********************************
15:23:24:         Date: Apr 15 2020
15:23:24:         Time: 14:53:14
15:23:24:     Revision: 216968bc7025029c841ed6e36e81a03a316890d3
15:23:24:       Branch: master
15:23:24:     Compiler: Visual C++ 2008
15:23:24:      Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
15:23:24:     Platform: win32 10
15:23:24:         Bits: 32
15:23:24:         Mode: Release
15:23:24:***********************************************************************
15:23:24:WU00:FS00:Starting
15:23:24:WU00:FS00:Core PID:6768
15:23:24:WU00:FS00:FahCore 0xa7 started
15:23:25:WU00:FS00:0xa7:*********************** Log Started 2020-08-02T15:23:24Z ***********************
15:23:25:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
15:23:25:WU00:FS00:0xa7:       Type: 0xa7
15:23:25:WU00:FS00:0xa7:       Core: Gromacs
15:23:25:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 6752 -checkpoint 30 -np 7
15:23:25:WU00:FS00:0xa7:************************************ CBang *************************************
15:23:25:WU00:FS00:0xa7:       Date: Nov 27 2019
15:23:25:WU00:FS00:0xa7:       Time: 03:40:09
15:23:25:WU00:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
15:23:25:WU00:FS00:0xa7:     Branch: master
15:23:25:WU00:FS00:0xa7:   Compiler: Visual C++ 2008
15:23:25:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
15:23:25:WU00:FS00:0xa7:   Platform: win32 10
15:23:25:WU00:FS00:0xa7:       Bits: 64
15:23:25:WU00:FS00:0xa7:       Mode: Release
15:23:25:WU00:FS00:0xa7:************************************ System ************************************
15:23:25:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
15:23:25:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 60 Stepping 3
15:23:25:WU00:FS00:0xa7:       CPUs: 8
15:23:25:WU00:FS00:0xa7:     Memory: 23.84GiB
15:23:25:WU00:FS00:0xa7:Free Memory: 18.10GiB
15:23:25:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
15:23:25:WU00:FS00:0xa7: OS Version: 6.1
15:23:25:WU00:FS00:0xa7:Has Battery: false
15:23:25:WU00:FS00:0xa7: On Battery: false
15:23:25:WU00:FS00:0xa7: UTC Offset: 2
15:23:25:WU00:FS00:0xa7:        PID: 6768
15:23:25:WU00:FS00:0xa7:        CWD: C:\Users\Charles\AppData\Roaming\FAHClient\work
15:23:25:WU00:FS00:0xa7:******************************** Build - libFAH ********************************
15:23:25:WU00:FS00:0xa7:    Version: 0.0.19
15:23:25:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
15:23:25:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org
15:23:25:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/
15:23:25:WU00:FS00:0xa7:       Date: Nov 25 2019
15:23:25:WU00:FS00:0xa7:       Time: 17:12:41
15:23:25:WU00:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
15:23:25:WU00:FS00:0xa7:     Branch: master
15:23:25:WU00:FS00:0xa7:   Compiler: Visual C++ 2008
15:23:25:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
15:23:25:WU00:FS00:0xa7:   Platform: win32 10
15:23:25:WU00:FS00:0xa7:       Bits: 64
15:23:25:WU00:FS00:0xa7:       Mode: Release
15:23:25:WU00:FS00:0xa7:************************************ Build *************************************
15:23:25:WU00:FS00:0xa7:       SIMD: avx_256
15:23:25:WU00:FS00:0xa7:********************************************************************************
15:23:25:WU00:FS00:0xa7:Project: 16438 (Run 0, Clone 256, Gen 321)
15:23:25:WU00:FS00:0xa7:Unit: 0x0000017280fccb015ea74d9084afbebb
15:23:25:WU00:FS00:0xa7:Digital signatures verified
15:23:25:WU00:FS00:0xa7:Reducing thread count from 7 to 6 to avoid domain decomposition by a prime number > 3
15:23:25:WU00:FS00:0xa7:Calling: mdrun -s frame321.tpr -o frame321.trr -x frame321.xtc -cpi state.cpt -cpt 30 -nt 6
15:23:25:WU00:FS00:0xa7:Steps: first=160500000 total=500000
15:23:25:WU01:FS01:Assigned to work server 192.0.2.1
15:23:25:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
15:23:25:WU00:FS00:0xa7:Completed 48892 out of 500000 steps (9%)
15:23:45:WU00:FS00:0xa7:Completed 50000 out of 500000 steps (10%)
15:23:46:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:23:58:ERROR:WU01:FS01:Exception: 10002: Received short response, expected 512 bytes, got 0
15:23:59:WU01:FS01:Assigned to work server 192.0.2.1
15:23:59:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
15:24:20:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:24:28:Saving configuration to config.xml
15:24:32:ERROR:WU01:FS01:Exception: 10002: Received short response, expected 512 bytes, got 0
15:24:59:WU01:FS01:Assigned to work server 192.0.2.1
15:24:59:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
15:25:11:WU00:FS00:0xa7:Completed 55000 out of 500000 steps (11%)
15:25:20:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:25:32:ERROR:WU01:FS01:Exception: 10002: Received short response, expected 512 bytes, got 0
15:26:36:WU01:FS01:Assigned to work server 192.0.2.1
15:26:36:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
15:26:37:WU00:FS00:0xa7:Completed 60000 out of 500000 steps (12%)
15:26:57:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:27:09:ERROR:WU01:FS01:Exception: 10002: Received short response, expected 512 bytes, got 0
15:28:04:WU00:FS00:0xa7:Completed 65000 out of 500000 steps (13%)
15:29:13:WU01:FS01:Assigned to work server 192.0.2.1
15:29:13:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
15:29:31:WU00:FS00:0xa7:Completed 70000 out of 500000 steps (14%)
15:29:34:WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80
15:29:47:ERROR:WU01:FS01:Exception: 10002: Received short response, expected 512 bytes, got 0
Top
zniper
Posts: 4
Joined: Fri Dec 30, 2016 10:24 am

Re: Waiting for work on 192.0.2.1 ?

Post by zniper »

toTOW wrote:To Linux users : Is your user running FAHClient in the "video" group (or the equivalent for your distribution) ?
it did , tried to remove it and still the same

Code: Select all

21:56:36:WU00:FS01:Connecting to assign1.foldingathome.org:80
21:56:38:WU00:FS01:Assigned to work server 192.0.2.1
21:56:38:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:TU104 [GeForce RTX 2070 SUPER] 8218 from 192.0.2.1
21:56:38:WU00:FS01:Connecting to 192.0.2.1:8080
21:58:47:WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80
21:58:47:WU00:FS01:Connecting to 192.0.2.1:80
Top
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Waiting for work on 192.0.2.1 ?

Post by bruce »

Apparently NVidia proprietary drivers install CUDA. FAHCore_22 does not currently use CUDA, it requires OpenCL. On Windows, when you install the NVidia proprietary drivers, you get both CUDA and OpenCL. On linux, I think those are 3 separate packages.

Nevertheless, if you're certain you were folding with FAHCore_22 on your GPU you must have had OpenCL installed from somewhere. There's a known bug, though: If your GPU is misconfigured, it's possible for it to appear to download a WU and run it, but it actually runs on the CPU, not on the GPU.

Bottom line: Errors involving 192.0.2.1 mean that a device cannot be used because FAH did not detect it about 100 lines from the beginning of FAH's log -- which is why I need to see that configuration step to help you.
Top
Jupis_folder
Posts: 27
Joined: Sun Aug 02, 2020 2:58 pm

Re: Waiting for work on 192.0.2.1 ?

Post by Jupis_folder »

We see the same problem on Windows and Linux. So I doubt it has something to do with OpenCL library, NVidia drivers or Windows vs. Linux.
In addition, I doubt that my Athlon 200GE is capable of executing a GPU workunit on CPU and achive more than 3 million PPD like the system did many months without issue.
Top
Post Reply

Return to “Issues with a specific server”