2 x R9 390 (old hardware) and optimize WU size?

If you think it might be a driver problem, see viewforum.php?f=79

Moderators: Site Moderators, FAHC Science Team

Post Reply
Quad2000
Posts: 24
Joined: Sun Apr 12, 2020 2:48 pm

2 x R9 390 (old hardware) and optimize WU size?

Post by Quad2000 »

Hello together,

I have a extra folding PC with 2 x R9 390. As I know I can define the preferred WU size (max-packet-size = big ) in the client.
What options do I have? Also mid packet size possible?
Should I define something relating to my GPU´s? Only mid size?

Thank you very much for your help.

Best regards Sascha
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: 2 x R9 390 (old hardware) and optimize WU size?

Post by JimboPalmer »

max-packet-size is a relic of dial up modems. I would not count on any researchers still configuring WUs for dial up.

max-packet-size has never been about WU complexity or power.

That said, you are free to play with it.

https://www.techpowerup.com/gpu-specs/r ... -390.c2664

You look good to fold with 2 R9 390s if your PSU is large enough.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 2 x R9 390 (old hardware) and optimize WU size?

Post by bruce »

in addition to words (like 'big') max-packet-size accepts numbers but as Jimbo says, it's a relic and the project owners don't set a value. A few years ago, projects got big enough that they bypassed the default setting so a couple of projects were not being assigned often enough. At that time, the default settings was simply encreased.to avoid conflicts.

You might want to write an enhancement request in https://github.com/FoldingAtHome/fah-issues asking for the setting to be reactivated and a policy be set to accomplish what you're asking for.
Post Reply