Moderators: Site Moderators , FAHC Science Team
Empie
Posts: 17 Joined: Sat Dec 27, 2008 3:56 pm
Location: Dutch Power Cows
Post
by Empie » Sun Apr 12, 2020 9:10 pm
Server: 140.163.4.241
Message: Server responded PLEASE_WAIT (464)
Upload completes, then 464 message is shown. Got this message for a couple of hours now. Afterwards upload is tried again and again.
Code: Select all
21:01:49:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:11743 run:0 clone:404 gen:46 core:0x22 unit:0x0000004d8ca304f15e67dfb10f729eb4
21:01:49:WU00:FS01:Uploading 12.56MiB to 140.163.4.241
21:01:49:WU00:FS01:Connecting to 140.163.4.241:8080
21:01:55:WU00:FS01:Upload 31.34%
21:02:01:WU00:FS01:Upload 60.69%
21:02:07:WU00:FS01:Upload 83.08%
21:02:11:WU00:FS01:Upload complete
21:02:11:WU00:FS01:Server responded PLEASE_WAIT (464)
21:02:11:WARNING:WU00:FS01:Failed to send results, will try again later
PantherX
Site Moderator
Posts: 6986 Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7 Windows 10 64-bit CPU:2/3/4/6 -> Intel i7-6700K GPU:1 -> Nvidia GTX 1080 Ti § Retired: 2x Nvidia GTX 1070 Nvidia GTX 675M Nvidia GTX 660 Ti Nvidia GTX 650 SC Nvidia GTX 260 896 MB SOC Nvidia 9600GT 1 GB OC Nvidia 9500M GS Nvidia 8800GTS 320 MB Intel Core i7-860 Intel Core i7-3840QM Intel i3-3240 Intel Core 2 Duo E8200 Intel Core 2 Duo E6550 Intel Core 2 Duo T8300 Intel Pentium E5500 Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Post
by PantherX » Sun Apr 12, 2020 9:47 pm
Please note that there's an significant load on the F@H Servers: viewtopic.php?f=18&t=33193
You client will continue to upload periodically and eventually with get through.
Empie
Posts: 17 Joined: Sat Dec 27, 2008 3:56 pm
Location: Dutch Power Cows
Post
by Empie » Sun Apr 12, 2020 10:03 pm
Thanks, just wanted to mention it, just to let you know.
Mxh
Posts: 1 Joined: Wed Apr 15, 2020 7:47 am
Post
by Mxh » Wed Apr 15, 2020 7:53 am
Just to let everyone know - as of right now, I'm having the same issue (9 attempts).
Code: Select all
07:34:12:WU00:FS01:Uploading 12.58MiB to 140.163.4.241
07:34:12:WU00:FS01:Connecting to 140.163.4.241:8080
07:34:53:WU00:FS01:Upload complete
07:34:53:WU00:FS01:Server responded PLEASE_WAIT (464)
07:34:53:WARNING:WU00:FS01:Failed to send results, will try again later
PantherX
Site Moderator
Posts: 6986 Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7 Windows 10 64-bit CPU:2/3/4/6 -> Intel i7-6700K GPU:1 -> Nvidia GTX 1080 Ti § Retired: 2x Nvidia GTX 1070 Nvidia GTX 675M Nvidia GTX 660 Ti Nvidia GTX 650 SC Nvidia GTX 260 896 MB SOC Nvidia 9600GT 1 GB OC Nvidia 9500M GS Nvidia 8800GTS 320 MB Intel Core i7-860 Intel Core i7-3840QM Intel i3-3240 Intel Core 2 Duo E8200 Intel Core 2 Duo E6550 Intel Core 2 Duo T8300 Intel Pentium E5500 Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:
Post
by PantherX » Wed Apr 15, 2020 9:48 am
Welcome to the F@H Forum Mxh,
Please note that here's the update from the lab which looks after those Servers. Good news is that they have a permanent fix. Other news is that it is taking a bit of time but we're almost there: viewtopic.php?p=325911#p325911
NuovaApe
Posts: 53 Joined: Mon Jun 17, 2019 12:49 pm
Post
by NuovaApe » Thu Apr 16, 2020 9:46 pm
12.58MiB? Me too.
You:
Mxh wrote:
Code: Select all
07:34:12:WU00:FS01:Uploading 12.58MiB to 140.163.4.241
07:34:12:WU00:FS01:Connecting to 140.163.4.241:8080
07:34:53:WU00:FS01:Upload complete
07:34:53:WU00:FS01:Server responded PLEASE_WAIT (464)
07:34:53:WARNING:WU00:FS01:Failed to send results, will try again later
Me:
Code: Select all
21:35:28:WU01:FS02:Uploading 12.58MiB to 140.163.4.231
21:35:28:WU01:FS02:Connecting to 140.163.4.231:8080
21:35:36:WU01:FS02:Upload 0.99%
21:35:42:WU01:FS02:Upload 14.91%
21:35:48:WU01:FS02:Upload 38.26%
21:35:54:WU01:FS02:Upload 58.64%
21:36:00:WU01:FS02:Upload 75.04%
21:36:06:WU01:FS02:Upload 89.94%
21:36:10:WU01:FS02:Upload complete
21:36:10:WU01:FS02:Server responded PLEASE_WAIT (464)
The constant retries (8 and counting) are going to hammer the poor upload server:-(
I took one for the team and closed FAHClient.
ChrisD5710
Posts: 13 Joined: Thu Apr 09, 2020 8:35 am
Post
by ChrisD5710 » Fri Apr 17, 2020 6:00 pm
Nice to know that something is not wrong at my end.
I will just keep trying.
ChrisD5710
spamaway
Posts: 1 Joined: Sun Mar 29, 2020 2:13 pm
Post
by spamaway » Sat Apr 18, 2020 12:55 am
The process get the following error when it uploads the data to the server.
Below is the first occurence:
Code: Select all
22:11:59:WU03:FS01:Uploading 24.34MiB to 140.163.4.241
22:11:59:WU03:FS01:Connecting to 140.163.4.241:8080
22:12:05:WU03:FS01:Upload 17.21%
22:12:11:WU03:FS01:Upload 32.36%
22:12:17:WU03:FS01:Upload 46.23%
22:12:23:WU03:FS01:Upload 61.38%
22:12:29:WU03:FS01:Upload 75.76%
22:12:35:WU03:FS01:Upload 97.08%
22:12:37:WU04:FS00:0xa7:Completed 260000 out of 500000 steps (52%)
22:12:40:WU03:FS01:Upload complete
22:12:40:WU03:FS01:Server responded PLEASE_WAIT (464)
22:12:40:WARNING:WU03:FS01:Failed to send results, will try again later
Still failing after 9 attempts to upload.
Code: Select all
00:12:23:WU03:FS01:Sending unit results: id:03 state:SEND error:NO_ERROR project:11746 run:0 clone:2948 gen:42 core:0x22 unit:0x0000004b8ca304f15e6aa6832270e452
00:12:23:WU03:FS01:Uploading 24.34MiB to 140.163.4.241
00:12:23:WU03:FS01:Connecting to 140.163.4.241:8080
00:12:29:WU03:FS01:Upload 16.95%
00:12:35:WU03:FS01:Upload 36.98%
00:12:41:WU03:FS01:Upload 47.51%
00:12:47:WU03:FS01:Upload 68.06%
00:12:53:WU03:FS01:Upload 85.52%
00:12:59:WU03:FS01:Upload complete
00:12:59:WU03:FS01:Server responded PLEASE_WAIT (464)
00:12:59:WARNING:WU03:FS01:Failed to send results, will try again later
Tohya
Posts: 48 Joined: Thu Feb 07, 2008 12:41 am
Post
by Tohya » Sat Apr 18, 2020 1:03 am
With please wait the server usually needs to be restarted due to a locked file. It will get fixed sooner or later and the WU uploaded.
SwingOp3
Posts: 24 Joined: Wed Mar 23, 2011 1:48 am
Post
by SwingOp3 » Sat Apr 18, 2020 9:04 pm
I, too, am having the same issues with this server.
Jan
Posts: 79 Joined: Tue Mar 31, 2020 6:46 pm
Post
by Jan » Sat Apr 18, 2020 11:46 pm
Its still subject of work by the staff. There have been a lot of fires to put out, they are on it. Thank you for your patience.
kwthom
Posts: 29 Joined: Sun Mar 29, 2020 11:06 pm
Location: Jaynes Station, AZ
Post
by kwthom » Sun Apr 19, 2020 1:43 pm
Code: Select all
12:42:41:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:11745 run:0 clone:8755 gen:1 core:0x22 unit:0x000000098ca304f15e6bc38b22d50b41
12:42:41:WU00:FS01:Uploading 14.66MiB to 140.163.4.241
12:42:41:WU00:FS01:Connecting to 140.163.4.241:8080
12:42:47:WU00:FS01:Upload 23.03%
12:42:53:WU00:FS01:Upload 52.46%
12:42:59:WU00:FS01:Upload 81.88%
12:43:03:WU00:FS01:Upload complete
12:43:03:WU00:FS01:Server responded PLEASE_WAIT (464)
Still with issues.
Jan
Posts: 79 Joined: Tue Mar 31, 2020 6:46 pm
Post
by Jan » Sun Apr 19, 2020 3:50 pm
The staff is aware of this situation. Projects are being redistributed to additional servers. Should see a noticable difference within the next 3-4 days.
Paul_Carter
Posts: 1 Joined: Mon Apr 20, 2020 8:39 am
Post
by Paul_Carter » Mon Apr 20, 2020 8:45 am
After 19th attempt, I have still not been able to save a result to 140.163.4.241 for more than 2 hours now:
08:36:39:WU00:FS01:Upload 11.43%
08:36:45:WU00:FS01:Upload 24.85%
08:36:51:WU00:FS01:Upload 37.78%
08:36:57:WU00:FS01:Upload 50.20%
08:37:03:WU00:FS01:Upload 62.63%
08:37:09:WU00:FS01:Upload 75.06%
08:37:15:WU00:FS01:Upload 86.49%
08:37:21:WU00:FS01:Upload 98.92%
08:37:22:WU00:FS01:Upload complete
08:37:22:WU00:FS01:Server responded PLEASE_WAIT (464)
Derion
Posts: 1 Joined: Mon Apr 20, 2020 3:41 pm
Post
by Derion » Mon Apr 20, 2020 3:45 pm
Lucky I finished my unit early, got 5.8 days left for the server fix