Hi all,
i've built a small server (intel xeon 4core) to run as another F&H client, this machine runs MS free Hyper-V 2019 as OS
which has the windows kernel, so it can run win32/64 desktop apps.
F&H 7.5.1 install correctly, the process FAHCLIENT.EXE seems to run correctly
how can i be sure that fahclient is downloading WU and proccesing them?
i see in the FAHCLIENT window WU00:FS00:0xa7:completed 100000 out of 2500000 steps (4%) etc.. etc..
but i also see a lof of:
WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80...
ERROR:WU01:FS01:Excpetion: Failed to connect to 192.0.2.1:80: etc...
thanks
massimo
F&H client 7.5.1 on MS free Hyper-V 2019
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 1996
- Joined: Sun Mar 22, 2020 5:52 pm
- Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21 - Location: UK
Re: F&H client 7.5.1 on MS free Hyper-V 2019
If you post the first 200 lines of the log and a sample of the errors someone may be able to help … Without that my speculation that there might be a GPU slot with configuration a bit iffy or hardware not up to the task is simple idle speculation on my part … For posting log see: viewtopic.php?f=24&t=26036
Did you install FAHControl on the server?
Did you install FAHControl on the server?
Last edited by Neil-B on Fri Apr 03, 2020 9:12 pm, edited 1 time in total.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
-
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: F&H client 7.5.1 on MS free Hyper-V 2019
That's an indication that your system is processing a WU.massimo2 wrote:...WU00:FS00:0xa7:completed 100000 out of 2500000 steps (4%)...
That's the indication of the significant demand for WUs from the F@H infrastructure. Summary -> viewtopic.php?f=24&t=33193massimo2 wrote:...WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80...
ERROR:WU01:FS01:Excpetion: Failed to connect to 192.0.2.1:80:...
In short, I should say that from the log snippets provided, your system is functioning as normal. However, if you would like, you can post the configuration portion of your log for us to examine
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
- Site Admin
- Posts: 7927
- Joined: Tue Apr 21, 2009 4:41 pm
- Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2 - Location: W. MA
Re: F&H client 7.5.1 on MS free Hyper-V 2019
This message however indicates you have some device configured, probably a GPU that is not supported for folding. That can be removed or paused once identified.massimo2 wrote:ERROR:WU01:FS01:Excpetion: Failed to connect to 192.0.2.1:80: etc...
iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Re: F&H client 7.5.1 on MS free Hyper-V 2019
thanks a lot, it seems to work wellPantherX wrote:That's an indication that your system is processing a WU.massimo2 wrote:...WU00:FS00:0xa7:completed 100000 out of 2500000 steps (4%)...
That's the indication of the significant demand for WUs from the F@H infrastructure. Summary -> viewtopic.php?f=24&t=33193massimo2 wrote:...WARNING:WU01:FS01:WorkServer connection failed on port 8080 trying 80...
ERROR:WU01:FS01:Excpetion: Failed to connect to 192.0.2.1:80:...
In short, I should say that from the log snippets provided, your system is functioning as normal. However, if you would like, you can post the configuration portion of your log for us to examine
i tried Hyperv-V instead of classic W10 since HV has no GUI and a small number of running processes and services
so more cpu power is dedicated to folding the WUs and also since HV is completely free
Re: F&H client 7.5.1 on MS free Hyper-V 2019
i guess, since this SuperMicro server mother board has an old ATI embedded video chipset (ES1000 afaik..)Joe_H wrote:This message however indicates you have some device configured, probably a GPU that is not supported for folding. That can be removed or paused once identified.massimo2 wrote:ERROR:WU01:FS01:Excpetion: Failed to connect to 192.0.2.1:80: etc...
the CPU instead is a Xeon 4 core 2,66 Ghz, not so much, but i've this one
(i also run F&H on other 2 PCs more powerful)
how can i disable the GPU (FS01 i guess) from the command line FAHClient.exe?
thanks
bye
massimo
Re: F&H client 7.5.1 on MS free Hyper-V 2019
Look in the config.xml and remove any slots except for the base CPU slot, like this
Code: Select all
<!-- Folding Slots -->
<slot id='0' type='CPU'/>
Re: F&H client 7.5.1 on MS free Hyper-V 2019
doneextide wrote:Look in the config.xml and remove any slots except for the base CPU slot, like this
Code: Select all
<!-- Folding Slots --> <slot id='0' type='CPU'/>
thanks a lot
massimo