new

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

ana
Posts: 7
Joined: Fri Mar 27, 2020 12:24 pm
Hardware configuration: Laptop.
Windows 7 Home Premium
Service Pack 1
Manufacturer: TOSHIBA
Model: Personal
Computer
Rating: 3.3
Processor: Intel (R) Celeron (R) CPU 925 @ 2.30GHz 2.29 GHz
Installed Memory (RAM): 2.00 GB (1.87 GB usable)
System type: 64-bit Operating System
Pen and Touch: not available
Computer name: C660-13R-TOSH
Contact:

new

Post by ana »

Hi
My question is, what operating system is best for this project? I say becuase I have a windows computer I was planning to put an ubuntu on it, but since all plans are on hold I can put pretty much whatever is best for this project. So please advise if it should leave this old windows 7 as is or best to put something else - I have ever only used ubuntu, lubuntu and to lesser extent redhat and mint.

Computer Specs: Specifically CPU type and speed: Toshiba 3.3. Windows
Processor: Intel(R) Celeron (R) CPU 925 @ 2.30GHz 2.29GHz
RAM: 2.00Gb (1.87 GB usable)
System type; 65-bit Operating System

Network Connection: ADSL
Operating System: Windows 7 Home Premium

Is what I can find out
davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: new

Post by davidcoton »

Ubuntu, Mint, and Windows are all popular with folders.
Linux based OSs can be more efficient at folding than Windows.
Maybe start with Windows and switch to Ubuntu or Mint later, if the F@H habit bites you.
Image
jonault
Posts: 215
Joined: Fri Dec 14, 2007 9:53 pm

Re: new

Post by jonault »

I think a Windows system is easier to get set up for folding right now. Linux has a couple issues to navigate (video drivers, python2 EOL) that make it a bit trickier for someone new to the project.
Image
PatrickHelmick
Posts: 6
Joined: Fri Mar 27, 2020 1:43 pm
Hardware configuration: Version: 7.5.1
Repository: Git
Platform: linux2 4.14.0-3-amd64
CPU: AMD A4-7300 APU with Radeon HD Graphics
CPUs: 2
Memory: 7.76GiB
Free Memory: 7.35GiB
OS: Linux 4.15.0-91-generic x86_64
GPUs: 1
GPU 0: Bus:0 Slot:1 Func:0 AMD:5 Richland [Radeon HD 8470D]
CUDA: Not detected: Failed to open dyn...

Re: new

Post by PatrickHelmick »

In which forum may I find how to optimize setup for an AMD A4-7300 APU with Radeon HD 8470D GPU using Linux Mint 18.3, Kernel 4.15.0-91, x86_64, to get a WU completed before the timeout? Thank you.
ana
Posts: 7
Joined: Fri Mar 27, 2020 12:24 pm
Hardware configuration: Laptop.
Windows 7 Home Premium
Service Pack 1
Manufacturer: TOSHIBA
Model: Personal
Computer
Rating: 3.3
Processor: Intel (R) Celeron (R) CPU 925 @ 2.30GHz 2.29 GHz
Installed Memory (RAM): 2.00 GB (1.87 GB usable)
System type: 64-bit Operating System
Pen and Touch: not available
Computer name: C660-13R-TOSH
Contact:

Re: new

Post by ana »

Thank you! starting now :)
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: new

Post by JimboPalmer »

If, in the future, you try to install more than two graphics cards per PC, the Linux has real advantages.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: new

Post by Joe_H »

PatrickHelmick wrote:In which forum may I find how to optimize setup for an AMD A4-7300 APU with Radeon HD 8470D GPU using Linux Mint 18.3, Kernel 4.15.0-91, x86_64, to get a WU completed before the timeout? Thank you.
The iGPU HD 8470D can not be used for GPU folding, it does not support use of double precision arithmetic. You can set the system to use your CPU for folding.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
PatrickHelmick
Posts: 6
Joined: Fri Mar 27, 2020 1:43 pm
Hardware configuration: Version: 7.5.1
Repository: Git
Platform: linux2 4.14.0-3-amd64
CPU: AMD A4-7300 APU with Radeon HD Graphics
CPUs: 2
Memory: 7.76GiB
Free Memory: 7.35GiB
OS: Linux 4.15.0-91-generic x86_64
GPUs: 1
GPU 0: Bus:0 Slot:1 Func:0 AMD:5 Richland [Radeon HD 8470D]
CUDA: Not detected: Failed to open dyn...

Re: new

Post by PatrickHelmick »

Yes, thank you. The automated setup used the CPU, and my computer received a work unit that completed after the Timeout deadline. I was thinking that maybe I could optimize the configuration somehow to at least meet the timeout, rather than having my machine slow things down for everyone. My iMac needs only a fraction of the timeout deadline to complete a WU. I could just leave the other one offline if I can't optimize.
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: new

Post by Joe_H »

The A4-7300 has a single FPU shared between two CPU threads. As initially set up, the client would have set the thread count to one. There might be a GPU slot defined for the 8470D, you can delete that. Setting the slider to Full should request a WU for 2 threads, it is possible that might gain enough on the shared FPU to complete on time. It depends a bit on how well the task scheduler handles threading on the APU.

Also there are som e larger WU's out, you may have been assigned one of those. Smaller ones might finish in time, especially if running continuously.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
PatrickHelmick
Posts: 6
Joined: Fri Mar 27, 2020 1:43 pm
Hardware configuration: Version: 7.5.1
Repository: Git
Platform: linux2 4.14.0-3-amd64
CPU: AMD A4-7300 APU with Radeon HD Graphics
CPUs: 2
Memory: 7.76GiB
Free Memory: 7.35GiB
OS: Linux 4.15.0-91-generic x86_64
GPUs: 1
GPU 0: Bus:0 Slot:1 Func:0 AMD:5 Richland [Radeon HD 8470D]
CUDA: Not detected: Failed to open dyn...

Re: new

Post by PatrickHelmick »

Thank you, Joe_H. I set the slider to full. I have read about the larger WU's. It just got one that it will finish in time. I wanted to be sure I'm not double-working or slowing things down.
ana
Posts: 7
Joined: Fri Mar 27, 2020 12:24 pm
Hardware configuration: Laptop.
Windows 7 Home Premium
Service Pack 1
Manufacturer: TOSHIBA
Model: Personal
Computer
Rating: 3.3
Processor: Intel (R) Celeron (R) CPU 925 @ 2.30GHz 2.29 GHz
Installed Memory (RAM): 2.00 GB (1.87 GB usable)
System type: 64-bit Operating System
Pen and Touch: not available
Computer name: C660-13R-TOSH
Contact:

Re: new

Post by ana »

Thank you to all that answered my query, the program is running now on the computer with Windows 7 as it was
JimboPalmer wrote:If, in the future, you try to install more than two graphics cards per PC, the Linux has real advantages.
To what end would I need more than two graphics cards?

The messages after this that I quote have lost me, so I'm taking the liberty to ask about some lines that come up on the "Client Advanced Control": GPUs 0. Not detected: Failed to open dynamic library 'nvcuda.dll'
CUDA Not detected: Failed to open dynamic library 'OpenCL.dll'
Win32 Service false

Should I do something about this? Thanks again
schertt
Posts: 22
Joined: Wed Apr 25, 2012 10:24 am

Re: new

Post by schertt »

You're not folding with a GPU ergo no GPU detected. CUDA is an NVidia API, AMD cards don't use this. It can be ignored.
Rel25917
Posts: 303
Joined: Wed Aug 15, 2012 2:31 am

Re: new

Post by Rel25917 »

ana wrote: To what end would I need more than two graphics cards?
Many people run multiple cards just for donating more power to F@H. Some run huge bitcoin mining rigs. Can also be used for graphics/video rendering. In the past you could run quad sli for gaming. Lots of reasons for multi card setups.
ana
Posts: 7
Joined: Fri Mar 27, 2020 12:24 pm
Hardware configuration: Laptop.
Windows 7 Home Premium
Service Pack 1
Manufacturer: TOSHIBA
Model: Personal
Computer
Rating: 3.3
Processor: Intel (R) Celeron (R) CPU 925 @ 2.30GHz 2.29 GHz
Installed Memory (RAM): 2.00 GB (1.87 GB usable)
System type: 64-bit Operating System
Pen and Touch: not available
Computer name: C660-13R-TOSH
Contact:

Re: new

Post by ana »

Thank you! But then, additional cards would need to be installed wouldn't they, because they are physical pieces of hardware?
davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: new

Post by davidcoton »

ana wrote:Thank you! But then, additional cards would need to be installed wouldn't they, because they are physical pieces of hardware?
Yes. And those comments may not apply to your circumstances. But we try to provide answers here that will help others with similar questions -- then we don't have to keep repeating everything.
Image
Post Reply