Need Help Configuring 2x 2080Tis

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Need Help Configuring 2x 2080Tis

Post by Sac87 »

Hello All,

I'm in need of some assistance. My PPD per 2080 Ti's are hovering around 1.2Mil-1.6Mil. I'm not certain if there is something wrong, but I am skeptical since I have seen so many posts of 2080 Ti's breaking 2.2Mil+. I do have my Threadripper folding as well. I have paused it for a few hours to see if that adjusted anything, but did not see a change.

I am using the stock FAH client settings out of the box.

I am quite positive (knowing me) that I have just overlooked something obvious you all will get a good laugh at.

System Specs:
  • Motherboard: GIGABYTE X399 AORUS XTREME Rev. 1
  • GPU: 2x ZOTAC GAMING GeForce RTX 2080 Ti AMP MAXX
  • CPU: AMD 2nd Gen Ryzen Threadripper 2950X
  • PSU: Thermaltake 1250W RGB PS-TPG-1250DPCTUS-T
  • RAM: G.SKILL Flare X Series 128GB DDR4 2933
FAH Details:
  • Version 7.5.1
  • Passkey is enabled.
  • 10+ WUs have been completed.
  • Do I need to park two cores? If so, what is the recommended software to do this?
Currently:
  • 2080 #1: 1,611,176 PPD (Project 14176) (2 mins 03 secs TPF)
  • 2080 #2: 1,205,548 PPD (Project 14163) (46 secs TPF)

Code: Select all

22:11:45:WU03:FS00:Starting
22:11:45:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\Lord\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 03 -suffix 01 -version 705 -lifeline 9776 -checkpoint 15 -np 30
22:11:45:WU03:FS00:Started FahCore on PID 11556
22:11:45:WU03:FS00:Core PID:11412
22:11:45:WU03:FS00:FahCore 0xa7 started
22:11:45:WU00:FS02:Starting
22:11:45:WU00:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\Lord\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 00 -suffix 01 -version 705 -lifeline 9776 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 1 -cuda-device 1 -gpu 1
22:11:45:WU00:FS02:Started FahCore on PID 7304
22:11:45:WU00:FS02:Core PID:13016
22:11:45:WU00:FS02:FahCore 0x21 started
22:11:45:WU01:FS01:Starting
22:11:45:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\Lord\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 705 -lifeline 9776 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 0 -cuda-device 0 -gpu 0
22:11:45:WU01:FS01:Started FahCore on PID 2856
22:11:45:WU01:FS01:Core PID:12268
22:11:45:WU01:FS01:FahCore 0x21 started
22:11:45:WU03:FS00:0xa7:*********************** Log Started 2019-06-22T22:11:45Z ***********************
22:11:45:WU03:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
22:11:45:WU03:FS00:0xa7:       Type: 0xa7
22:11:45:WU03:FS00:0xa7:       Core: Gromacs
22:11:45:WU03:FS00:0xa7:    Website: https://foldingathome.org/
22:11:45:WU03:FS00:0xa7:  Copyright: (c) 2009-2018 foldingathome.org
22:11:45:WU03:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
22:11:45:WU03:FS00:0xa7:       Args: -dir 03 -suffix 01 -version 705 -lifeline 11556 -checkpoint 15 -np
22:11:45:WU03:FS00:0xa7:             30
22:11:45:WU03:FS00:0xa7:     Config: <none>
22:11:45:WU03:FS00:0xa7:************************************ Build *************************************
22:11:45:WU03:FS00:0xa7:    Version: 0.0.17
22:11:45:WU03:FS00:0xa7:       Date: Apr 27 2018
22:11:45:WU03:FS00:0xa7:       Time: 16:19:36
22:11:45:WU03:FS00:0xa7: Repository: Git
22:11:45:WU03:FS00:0xa7:   Revision: 21359963583d09ec2063ef946399441c4df4ccd7
22:11:45:WU00:FS02:0x21:*********************** Log Started 2019-06-22T22:11:45Z ***********************
22:11:45:WU03:FS00:0xa7:     Branch: master
22:11:45:WU00:FS02:0x21:Project: 14176 (Run 65, Clone 2, Gen 121)
22:11:45:WU03:FS00:0xa7:   Compiler: Visual C++ 2008
22:11:45:WU00:FS02:0x21:Unit: 0x000000a30002894c5cae69f837e2fc5c
22:11:45:WU03:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
22:11:45:WU00:FS02:0x21:CPU: 0x00000000000000000000000000000000
22:11:45:WU03:FS00:0xa7:   Platform: win32 10
22:11:45:WU00:FS02:0x21:Machine: 2
22:11:45:WU03:FS00:0xa7:       Bits: 64
22:11:45:WU00:FS02:0x21:Digital signatures verified
22:11:45:WU03:FS00:0xa7:       Mode: Release
22:11:45:WU00:FS02:0x21:Folding@home GPU Core21 Folding@home Core
22:11:45:WU03:FS00:0xa7:       SIMD: avx_256
22:11:45:WU00:FS02:0x21:Version 0.0.18
22:11:45:WU03:FS00:0xa7:************************************ System ************************************
22:11:45:WU00:FS02:0x21:  Found a checkpoint file
22:11:45:WU03:FS00:0xa7:        CPU: Unknown
22:11:45:WU03:FS00:0xa7:     CPU ID: 
22:11:45:WU03:FS00:0xa7:       CPUs: 32
22:11:45:WU03:FS00:0xa7:     Memory: 127.88GiB
22:11:45:WU03:FS00:0xa7:Free Memory: 123.15GiB
22:11:45:WU03:FS00:0xa7:    Threads: WINDOWS_THREADS
22:11:45:WU03:FS00:0xa7: OS Version: 6.2
22:11:45:WU03:FS00:0xa7:Has Battery: false
22:11:45:WU03:FS00:0xa7: On Battery: false
22:11:45:WU03:FS00:0xa7: UTC Offset: -7
22:11:45:WU03:FS00:0xa7:        PID: 11412
22:11:45:WU01:FS01:0x21:*********************** Log Started 2019-06-22T22:11:45Z ***********************
22:11:45:WU03:FS00:0xa7:        CWD: C:\Users\Lord\AppData\Roaming\FAHClient\work
22:11:45:WU01:FS01:0x21:Project: 14163 (Run 33, Clone 75, Gen 35)
22:11:45:WU03:FS00:0xa7:         OS: Windows 10 Home
22:11:45:WU01:FS01:0x21:Unit: 0x000000300002894c5c38bf6d2dbb806c
22:11:45:WU03:FS00:0xa7:    OS Arch: AMD64
22:11:45:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
22:11:45:WU03:FS00:0xa7:********************************************************************************
22:11:45:WU01:FS01:0x21:Machine: 1
22:11:45:WU03:FS00:0xa7:Project: 14153 (Run 2, Clone 27, Gen 188)
22:11:45:WU01:FS01:0x21:Digital signatures verified
22:11:45:WU03:FS00:0xa7:Unit: 0x000000e90002894b5c546d1b19dca241
22:11:45:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
22:11:45:WU03:FS00:0xa7:Digital signatures verified
22:11:45:WU01:FS01:0x21:Version 0.0.18
22:11:45:WU03:FS00:0xa7:Calling: mdrun -s frame188.tpr -o frame188.trr -cpi state.cpt -cpt 15 -nt 30
22:11:45:WU01:FS01:0x21:  Found a checkpoint file
22:11:45:WU03:FS00:0xa7:Steps: first=940000000 total=5000000
22:11:45:WU03:FS00:0xa7:Completed 4256822 out of 5000000 steps (85%)
22:11:46:WU01:FS01:0x21:Completed 2250000 out of 12500000 steps (18%)
22:11:46:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
22:11:47:WU00:FS02:0x21:Completed 9000000 out of 25000000 steps (36%)
22:11:47:WU00:FS02:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
22:12:17:Saving configuration to config.xml
22:12:17:<config>
22:12:17:  <!-- Folding Core -->
22:12:17:  <core-priority v='low'/>
22:12:17:
22:12:17:  <!-- Network -->
22:12:17:  <proxy v=':8080'/>
22:12:17:
22:12:17:  <!-- Slot Control -->
22:12:17:  <power v='full'/>
22:12:17:
22:12:17:  <!-- User Information -->
22:12:17:  <passkey v='********************************'/>
22:12:17:  <team v='224906'/>
22:12:17:  <user v='Son#1'/>
22:12:17:
22:12:17:  <!-- Folding Slots -->
22:12:17:  <slot id='0' type='CPU'/>
22:12:17:  <slot id='1' type='GPU'/>
22:12:17:  <slot id='2' type='GPU'/>
22:12:17:</config>
22:12:28:WU01:FS01:0x21:Completed 2375000 out of 12500000 steps (19%)
22:12:53:WU03:FS00:0xa7:Completed 4300000 out of 5000000 steps (86%)
22:13:09:WU01:FS01:0x21:Completed 2500000 out of 12500000 steps (20%)
Image
Image


Image
Image
Last edited by Sac87 on Sat Jun 22, 2019 11:41 pm, edited 5 times in total.
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Need Help Configuring 2x 2080Tis

Post by JimboPalmer »

Neither of these are obvious or will get you laughed at, but they are worth trying.

While you posted a log, you did not post the most interesting part, the configuration. This allows us to see what the Client thinks your PC looks like (CPU, OS, RAM, etc.etc.) Our advice may well improve with better data.

It is possible you added hardware after you installed the Client. The F@H client does a wildly better job of finding hardware during installation. So consider finishing running WUs, un-installing F@H, deleting all work files, and reinstalling overwriting data. This should force the installer to rediscover the hardware. You will need to type in the name, team and passcode.

[As always, I am not affiliated with F@H, just a user like you.]
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Re: Need Help Configuring 2x 2080Tis

Post by Sac87 »

JimboPalmer wrote:Neither of these are obvious or will get you laughed at, but they are worth trying.

While you posted a log, you did not post the most interesting part, the configuration. This allows us to see what the Client thinks your PC looks like (CPU, OS, RAM, etc.etc.) Our advice may well improve with better data.

It is possible you added hardware after you installed the Client. The F@H client does a wildly better job of finding hardware during installation. So consider finishing running WUs, un-installing F@H, deleting all work files, and reinstalling overwriting data. This should force the installer to rediscover the hardware. You will need to type in the name, team and passcode.

[As always, I am not affiliated with F@H, just a user like you.]
Thanks for the quick reply!

I just got the system all set up yesterday night and after I was completed, I installed FAH. So it didn't see me install the cards. I can do an uninstall but where would I find the Work Files? I've checked the program directory but don't see anything in the FAH folder that looks like Work Orders.
I *think* I uploaded the interesting bits of the log to my original message.
I also uploaded pics showing the Advanced tab in Gpuz.
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Need Help Configuring 2x 2080Tis

Post by JimboPalmer »

The underlying GROMACS code that F@H uses for CPU folding hates large primes, and multiples of large primes. with 32 CPUs (and 2 reserved for feeding the GPUs) you have 30 CPUs folding ("-nt 30") this would be ideal as it is 2 times 3 times 5, no large primes. There is some chance that you may run out of WUs (many researchers limit themselves to 16) if so, make two CPU Slots, one of 16 and one of 12. If you do not have issues with 30, leave it there.

One of your GPUs seems to be limited by voltage, how large is your Power Supply? Are both cards on the same chain of connectors?

You seem to be using 45% of the PCIE bus. Are both of these cards in x16 slots?

Other than thaat, I am in over my head and will let others give advice.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Re: Need Help Configuring 2x 2080Tis

Post by Sac87 »

JimboPalmer wrote:The underlying GROMACS code that F@H uses for CPU folding hates large primes, and multiples of large primes. with 32 CPUs (and 2 reserved for feeding the GPUs) you have 30 CPUs folding ("-nt 30") this would be ideal as it is 2 times 3 times 5, no large primes. There is some chance that you may run out of WUs (many researchers limit themselves to 16) if so, make two CPU Slots, one of 16 and one of 12. If you do not have issues with 30, leave it there.

One of your GPUs seems to be limited by voltage, how large is your Power Supply? Are both cards on the same chain of connectors?

You seem to be using 45% of the PCIE bus. Are both of these cards in x16 slots?

Other than thaat, I am in over my head and will let others give advice.
Thanks for the reply! I added my system specs to the original post in case that helps troubleshooting.

Would it be better for me to just split the CPU right now?

As for the voltage limitation.. I'm using a 1,250W Thermaltake modular PSU (PS-TPG-1250DPCTUS-T). It is a single rail PSU but to be certain I adjusted the connectors around with no change. After some brief Googling... it seems that my graphics cards are already overclocked to their voltage limit. Perhaps I should dial back the OC?

Both cards are inserted into the PCIE x16 slots. I verified with the Nvidia control panel as well as HWiNFO64. Is there anything that could be automatically throttling me? I am on the Performance power plan, too.
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Need Help Configuring 2x 2080Tis

Post by JimboPalmer »

If you are getting WUs at 30 threads, that should be the most points, two smaller slots will get less total points. I only mentioned it in case you suddenly notice the CPU slot idle.

I am no expert at OCing, but if you get curious, I would try stock to see how many PPD it gets. I would also try a single GPU, just to see if PCIE bandwidth is an issue.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Re: Need Help Configuring 2x 2080Tis

Post by Sac87 »

So here's where I currently am:

Good news is FAH now recognizes my CPU properly while my GPU says "01:39:04:Enabled folding slot 01: PAUSED gpu:0:TU102 [GeForce RTX 2080 Ti Rev. A] M 13448 (not configured)"
  • Full Re-Install
  • Removed 1x 2080Ti
  • Removed my Overclocking on the 2080Ti
PPD Estimate: 1.26Mil

Here's the new initial log:

Code: Select all

*********************** Log Started 2019-06-23T01:39:03Z ***********************
01:39:03:************************* Folding@home Client *************************
01:39:03:        Website: https://foldingathome.org/
01:39:03:      Copyright: (c) 2009-2018 foldingathome.org
01:39:03:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
01:39:03:           Args: --open-web-control
01:39:03:         Config: <none>
01:39:03:******************************** Build ********************************
01:39:03:        Version: 7.5.1
01:39:03:           Date: May 11 2018
01:39:03:           Time: 13:06:32
01:39:03:     Repository: Git
01:39:03:       Revision: 4705bf53c635f88b8fe85af7675557e15d491ff0
01:39:03:         Branch: master
01:39:03:       Compiler: Visual C++ 2008
01:39:03:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
01:39:03:       Platform: win32 10
01:39:03:           Bits: 32
01:39:03:           Mode: Release
01:39:03:******************************* System ********************************
01:39:03:            CPU: AMD Ryzen Threadripper 2950X 16-Core Processor
01:39:03:         CPU ID: AuthenticAMD Family 23 Model 8 Stepping 2
01:39:03:           CPUs: 32
01:39:03:         Memory: 127.90GiB
01:39:03:    Free Memory: 123.67GiB
01:39:03:        Threads: WINDOWS_THREADS
01:39:03:     OS Version: 6.2
01:39:03:    Has Battery: false
01:39:03:     On Battery: false
01:39:03:     UTC Offset: -7
01:39:03:            PID: 988
01:39:03:            CWD: C:\Users\Lord\AppData\Roaming\FAHClient
01:39:03:             OS: Windows 10 Home
01:39:03:        OS Arch: AMD64
01:39:03:           GPUs: 0
01:39:03:  CUDA Device 0: Platform:0 Device:0 Bus:67 Slot:0 Compute:7.5 Driver:10.2
01:39:03:OpenCL Device 0: Platform:0 Device:0 Bus:67 Slot:0 Compute:1.2 Driver:430.86
01:39:03:  Win32 Service: false
01:39:03:***********************************************************************
01:39:03:<config>
01:39:03:  <!-- Folding Slots -->
01:39:03:</config>
01:39:03:Connecting to assign1.foldingathome.org:8080
01:39:04:Updated GPUs.txt
01:39:04:Read GPUs.txt
01:39:04:Trying to access database...
01:39:04:Successfully acquired database lock
01:39:04:Enabled folding slot 00: PAUSED cpu:30 (not configured)
01:39:04:Enabled folding slot 01: PAUSED gpu:0:TU102 [GeForce RTX 2080 Ti Rev. A] M 13448 (not configured)
01:39:06:10:127.0.0.1:New Web connection
01:39:24:Set client configured
01:39:25:WU00:FS00:Connecting to 65.254.110.245:8080
01:39:25:WU01:FS01:Connecting to 65.254.110.245:8080
01:39:25:WU00:FS00:Connecting to 65.254.110.245:8080
01:39:25:WU00:FS00:Assigned to work server 155.247.166.219
01:39:25:WU01:FS01:Connecting to 65.254.110.245:8080
01:39:25:WU00:FS00:Requesting new work unit for slot 00: READY cpu:30 from 155.247.166.219
01:39:25:WU00:FS00:Connecting to 155.247.166.219:8080
01:39:26:WU00:FS00:Downloading 294.96KiB
01:39:26:WU01:FS01:Assigned to work server 155.247.166.220
01:39:26:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:TU102 [GeForce RTX 2080 Ti Rev. A] M 13448 from 155.247.166.220
01:39:26:WU01:FS01:Connecting to 155.247.166.220:8080
01:39:26:WU00:FS00:Download complete
01:39:27:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:14153 run:12 clone:99 gen:134 core:0xa7 unit:0x0000009c0002894b5c546d4e2bd4dd7e
01:39:27:WU00:FS00:Downloading core from http://cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah
01:39:27:WU00:FS00:Connecting to cores.foldingathome.org:80
01:39:27:WU00:FS00:FahCore a7: Downloading 6.82MiB
01:39:27:WU01:FS01:Downloading 503.90KiB
01:39:28:WU01:FS01:Download complete
01:39:28:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:14163 run:8 clone:40 gen:230 core:0x21 unit:0x000001490002894c5c38be46aa7f8e1f
01:39:28:WU01:FS01:Downloading core from http://cores.foldingathome.org/Win32/AMD64/NVIDIA/Fermi/Core_21.fah
01:39:28:WU01:FS01:Connecting to cores.foldingathome.org:80
01:39:28:WU00:FS00:FahCore a7: Download complete
01:39:28:WU01:FS01:FahCore 21: Downloading 3.47MiB
01:39:28:WU00:FS00:Valid core signature
01:39:28:WU00:FS00:Unpacked 20.16MiB to cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe
01:39:28:WU00:FS00:Unpacked 2.64MiB to cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/libfftw3f-3.dll
01:39:28:WU00:FS00:Starting
01:39:28:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\Lord\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 705 -lifeline 988 -checkpoint 15 -np 30
01:39:28:WU00:FS00:Started FahCore on PID 9776
01:39:28:WU00:FS00:Core PID:8916
01:39:28:WU00:FS00:FahCore 0xa7 started
01:39:28:WU01:FS01:FahCore 21: Download complete
01:39:29:WU00:FS00:0xa7:*********************** Log Started 2019-06-23T01:39:28Z ***********************
01:39:29:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
01:39:29:WU00:FS00:0xa7:       Type: 0xa7
01:39:29:WU00:FS00:0xa7:       Core: Gromacs
01:39:29:WU00:FS00:0xa7:    Website: https://foldingathome.org/
01:39:29:WU00:FS00:0xa7:  Copyright: (c) 2009-2018 foldingathome.org
01:39:29:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
01:39:29:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 9776 -checkpoint 15 -np
01:39:29:WU00:FS00:0xa7:             30
01:39:29:WU00:FS00:0xa7:     Config: <none>
01:39:29:WU00:FS00:0xa7:************************************ Build *************************************
01:39:29:WU00:FS00:0xa7:    Version: 0.0.17
01:39:29:WU00:FS00:0xa7:       Date: Apr 27 2018
01:39:29:WU00:FS00:0xa7:       Time: 16:19:36
01:39:29:WU00:FS00:0xa7: Repository: Git
01:39:29:WU00:FS00:0xa7:   Revision: 21359963583d09ec2063ef946399441c4df4ccd7
01:39:29:WU00:FS00:0xa7:     Branch: master
01:39:29:WU00:FS00:0xa7:   Compiler: Visual C++ 2008
01:39:29:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
01:39:29:WU00:FS00:0xa7:   Platform: win32 10
01:39:29:WU00:FS00:0xa7:       Bits: 64
01:39:29:WU00:FS00:0xa7:       Mode: Release
01:39:29:WU00:FS00:0xa7:       SIMD: avx_256
01:39:29:WU00:FS00:0xa7:************************************ System ************************************
01:39:29:WU00:FS00:0xa7:        CPU: Unknown
01:39:29:WU00:FS00:0xa7:     CPU ID: 
01:39:29:WU00:FS00:0xa7:       CPUs: 32
01:39:29:WU00:FS00:0xa7:     Memory: 127.90GiB
01:39:29:WU00:FS00:0xa7:Free Memory: 123.58GiB
01:39:29:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
01:39:29:WU00:FS00:0xa7: OS Version: 6.2
01:39:29:WU00:FS00:0xa7:Has Battery: false
01:39:29:WU00:FS00:0xa7: On Battery: false
01:39:29:WU00:FS00:0xa7: UTC Offset: -7
01:39:29:WU00:FS00:0xa7:        PID: 8916
01:39:29:WU00:FS00:0xa7:        CWD: C:\Users\Lord\AppData\Roaming\FAHClient\work
01:39:29:WU00:FS00:0xa7:         OS: Windows 10 Home
01:39:29:WU00:FS00:0xa7:    OS Arch: AMD64
01:39:29:WU00:FS00:0xa7:********************************************************************************
01:39:29:WU00:FS00:0xa7:Project: 14153 (Run 12, Clone 99, Gen 134)
01:39:29:WU00:FS00:0xa7:Unit: 0x0000009c0002894b5c546d4e2bd4dd7e
01:39:29:WU00:FS00:0xa7:Reading tar file core.xml
01:39:29:WU00:FS00:0xa7:Reading tar file frame134.tpr
01:39:29:WU00:FS00:0xa7:Digital signatures verified
01:39:29:WU00:FS00:0xa7:Calling: mdrun -s frame134.tpr -o frame134.trr -cpt 15 -nt 30
01:39:29:WU00:FS00:0xa7:Steps: first=670000000 total=5000000
01:39:29:WU01:FS01:Valid core signature
01:39:29:WU01:FS01:Unpacked 11.80MiB to cores/cores.foldingathome.org/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe
01:39:29:WU00:FS00:0xa7:Completed 1 out of 5000000 steps (0%)
01:39:29:WU01:FS01:Starting
01:39:29:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\Lord\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 705 -lifeline 988 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 0 -cuda-device 0 -gpu 0
01:39:29:WU01:FS01:Started FahCore on PID 7144
01:39:29:WU01:FS01:Core PID:7896
01:39:29:WU01:FS01:FahCore 0x21 started
01:39:30:WU01:FS01:0x21:*********************** Log Started 2019-06-23T01:39:29Z ***********************
01:39:30:WU01:FS01:0x21:Project: 14163 (Run 8, Clone 40, Gen 230)
01:39:30:WU01:FS01:0x21:Unit: 0x000001490002894c5c38be46aa7f8e1f
01:39:30:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
01:39:30:WU01:FS01:0x21:Machine: 1
01:39:30:WU01:FS01:0x21:Reading tar file core.xml
01:39:30:WU01:FS01:0x21:Reading tar file integrator.xml
01:39:30:WU01:FS01:0x21:Reading tar file state.xml
01:39:30:WU01:FS01:0x21:Reading tar file system.xml
01:39:30:WU01:FS01:0x21:Digital signatures verified
01:39:30:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
01:39:30:WU01:FS01:0x21:Version 0.0.18
01:39:31:WU01:FS01:0x21:Completed 0 out of 12500000 steps (0%)
01:39:31:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
01:39:35:FS00:Shutting core down
01:39:35:WU00:FS00:0xa7:WARNING:Console control signal 1 on PID 8916
01:39:35:WU00:FS00:0xa7:Exiting, please wait. . .
01:39:35:WU00:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
01:39:36:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
01:39:36:WU00:FS00:Starting
01:39:36:WARNING:WU00:FS00:Changed SMP threads from 30 to 31 this can cause some work units to fail
01:39:36:WARNING:WU00:FS00:AS lowered CPUs from 31 to 30
01:39:36:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\Lord\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 705 -lifeline 988 -checkpoint 15 -np 30
01:39:36:WU00:FS00:Started FahCore on PID 6148
01:39:36:WU00:FS00:Core PID:1620
01:39:36:WU00:FS00:FahCore 0xa7 started
01:39:36:WU00:FS00:0xa7:*********************** Log Started 2019-06-23T01:39:36Z ***********************
01:39:36:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
01:39:36:WU00:FS00:0xa7:       Type: 0xa7
01:39:36:WU00:FS00:0xa7:       Core: Gromacs
01:39:36:WU00:FS00:0xa7:    Website: https://foldingathome.org/
01:39:36:WU00:FS00:0xa7:  Copyright: (c) 2009-2018 foldingathome.org
01:39:36:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
01:39:36:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 6148 -checkpoint 15 -np
01:39:36:WU00:FS00:0xa7:             30
01:39:36:WU00:FS00:0xa7:     Config: <none>
01:39:36:WU00:FS00:0xa7:************************************ Build *************************************
01:39:36:WU00:FS00:0xa7:    Version: 0.0.17
01:39:36:WU00:FS00:0xa7:       Date: Apr 27 2018
01:39:36:WU00:FS00:0xa7:       Time: 16:19:36
01:39:36:WU00:FS00:0xa7: Repository: Git
01:39:36:WU00:FS00:0xa7:   Revision: 21359963583d09ec2063ef946399441c4df4ccd7
01:39:36:WU00:FS00:0xa7:     Branch: master
01:39:36:WU00:FS00:0xa7:   Compiler: Visual C++ 2008
01:39:36:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
01:39:36:WU00:FS00:0xa7:   Platform: win32 10
01:39:36:WU00:FS00:0xa7:       Bits: 64
01:39:36:WU00:FS00:0xa7:       Mode: Release
01:39:36:WU00:FS00:0xa7:       SIMD: avx_256
01:39:36:WU00:FS00:0xa7:************************************ System ************************************
01:39:36:WU00:FS00:0xa7:        CPU: Unknown
01:39:36:WU00:FS00:0xa7:     CPU ID: 
01:39:36:WU00:FS00:0xa7:       CPUs: 32
01:39:36:WU00:FS00:0xa7:     Memory: 127.90GiB
01:39:36:WU00:FS00:0xa7:Free Memory: 123.46GiB
01:39:36:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
01:39:36:WU00:FS00:0xa7: OS Version: 6.2
01:39:36:WU00:FS00:0xa7:Has Battery: false
01:39:36:WU00:FS00:0xa7: On Battery: false
01:39:36:WU00:FS00:0xa7: UTC Offset: -7
01:39:36:WU00:FS00:0xa7:        PID: 1620
01:39:36:WU00:FS00:0xa7:        CWD: C:\Users\Lord\AppData\Roaming\FAHClient\work
01:39:36:WU00:FS00:0xa7:         OS: Windows 10 Home
01:39:36:WU00:FS00:0xa7:    OS Arch: AMD64
01:39:36:WU00:FS00:0xa7:********************************************************************************
01:39:36:WU00:FS00:0xa7:Project: 14153 (Run 12, Clone 99, Gen 134)
01:39:36:WU00:FS00:0xa7:Unit: 0x0000009c0002894b5c546d4e2bd4dd7e
01:39:36:WU00:FS00:0xa7:Digital signatures verified
01:39:36:WU00:FS00:0xa7:Calling: mdrun -s frame134.tpr -o frame134.trr -cpi state.cpt -cpt 15 -nt 30
01:39:36:WU00:FS00:0xa7:Steps: first=670000000 total=5000000
01:39:37:WU00:FS00:0xa7:Completed 4342 out of 5000000 steps (0%)
01:40:05:Saving configuration to config.xml
01:40:05:<config>
01:40:05:  <!-- Slot Control -->
01:40:05:  <power v='FULL'/>
01:40:05:
01:40:05:  <!-- User Information -->
01:40:05:  <passkey v='********************************'/>
01:40:05:  <team v='224906'/>
01:40:05:  <user v='Son#1'/>
01:40:05:
01:40:05:  <!-- Folding Slots -->
01:40:05:  <slot id='0' type='CPU'/>
01:40:05:  <slot id='1' type='GPU'/>
01:40:05:</config>
01:40:15:WU01:FS01:0x21:Completed 125000 out of 12500000 steps (1%)
01:40:45:WU00:FS00:0xa7:Completed 50000 out of 5000000 steps (1%)
01:40:58:WU01:FS01:0x21:Completed 250000 out of 12500000 steps (2%)
Image
Image

:e?:
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Need Help Configuring 2x 2080Tis

Post by JimboPalmer »

Mostly, we have exceeded my skill level and need a real expert.

"01:39:36:WARNING:WU00:FS00:Changed SMP threads from 30 to 31 this can cause some work units to fail
01:39:36:WARNING:WU00:FS00:AS lowered CPUs from 31 to 30"

Because you only have one GPU now, it only reserves one CPU, then realizes that is a large prime, and goes back to reserving 2.

One GPU uses 33% of the PCIE bus, so there may have been some contention with 2.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Need Help Configuring 2x 2080Tis

Post by bruce »

Let's suppose you leave the number of CPUs set to 30. Depending on what projects happen to be assigning at the moment you request a new WU, you might get a WU that uses all 30 cores ... or maybe the projects that can be run on all 30 are in short supply. The Assignment Server may direct you to another Work Server which happens to have projets that are limite to CPU:16 and one of those WUs might be downloaded. FAHClient will recognize this situation and reallocate 16 CPU to that project, leaving the 14 other CPU idle. When this WU is completed, you'll be assigned whatever project that can use as many as possible of your 30 threads.

By creating two slots, CPU:16 and CPU:12 you'll increase the average number of CPUs that will be active for any situation when you can't get one WU that uses all 30..
Theodore
Posts: 117
Joined: Sun Feb 10, 2019 2:07 pm

Re: Need Help Configuring 2x 2080Tis

Post by Theodore »

From the GPU side, it all looks good.
It appears to be installed in a full size slot, at gen 3.0.
The Tis can even pull 1.8mil in Linux on a pcie 3.0 1x slot (with riser).
Which means they'll do the same in windows on a 2x to 4x slot.

You're sending 250Watt average to the GPU, which also looks normal.
GPU is running at 75 C, which is a bit high.

While this is not the real issue at hand, I'd recommend to pull the power consumption down to a Max of 200 watt. 180 watt preferably.
It may be counterintuitive, dropping performance on your GPU to increase the performance, but it actually won't significantly affect your PPD. In return, your card will run a lot cooler.
I would then try to run an overclocking utility, to pull the GPU frequency back up, once the card's real issue has been found.

One discrepancy I immediately noted, was that your GPUs run at extremely low clockrates. The average clockrate mine runs at is 1995 to 2040 MHz, while yours is running at 1350-1410 MHz.

I'd start by checking why in that area.
Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Re: Need Help Configuring 2x 2080Tis

Post by Sac87 »

Thanks for the help guys!

The GPUs came Fromm Zotac already Overclocked so I’ll need to undo their clocks. What software do you use to OC your 2080s?

My GPUs are set around 1350 base clock with a “Boost” of up to 1950 I believe. On the second page of Gpuz it shows what they’re currently running at (right? I could be wrong...)
JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Need Help Configuring 2x 2080Tis

Post by JimboPalmer »

I have a Zotac GTX 1050ti low profile card in a mini tower, the software for it is Fire Storm.

https://www.zotac.com/us/page/firestorm

It works for me, but you will use a different version than I do.

Not as specialized to your cards, but well regarded, is Afterburner

https://www.msi.com/page/afterburner
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Theodore
Posts: 117
Joined: Sun Feb 10, 2019 2:07 pm

Re: Need Help Configuring 2x 2080Tis

Post by Theodore »

Oh, ok. I thought this was the case. GPUz doesn't display boost frequency.
The 2 most popular free overclocking programs for NVidia cards are EVGA's XOC, and MSI's afterburner. Both are for Windows.
For Linux it'll be NVidia xconfig with cool-bits enabled.

Once you install one of these programs you can easily see the temperatures, frequency and voltages of the GPU and memory.
Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Re: Need Help Configuring 2x 2080Tis

Post by Sac87 »

I shall underclock them and report back :) Shooting for 180W each.
Sac87
Posts: 14
Joined: Sat Jun 22, 2019 5:19 pm

Re: Need Help Configuring 2x 2080Tis

Post by Sac87 »

Alright!

I managed to underclock them so they sit at 180W / 77°C. They're now at around 1.7Mil (2010 MHz) / 1.5Mil (1935 MHz) respectively.

I did experiment with increasing the wattage back up to 200W but didn't see much of a gain for the added heat / wattage.

Still seems odd I can't manage to get the points passed 2Mil :? Maybe I'm just getting WUs that can't produce that much for me :e(


Image
Image

Image
Image
Post Reply