One last thought about where the PPD disparity/bottleneck is coming from.
My motherboard (P4N SLI) only runs PCI-E version 1. Modern boards run PCI-E version 3. Like @Foldy said, PCI-E v3 x4 is bottlnecking high power GPUs on windows but not on linux. So, I did some reading into PCI-Express.
The motherboard I am using is PCI-E v1.
PCI-E v1 is only 2gbps per lane. That's 4 Gigabytes per second in a x16 slot.
PCI-E v2 is doubled at 4gbps per lane, or 8 Gigabytes per second in a x16 slot.
PCI-E v3 is 7.877gbps per lane, or 15.574 gigabytes per second in a x16 slot.
So a PCI-E v1 x16 slot is equal to: PCI-E v2 x8 slot, or PCI-E v3 x4 slot.
So I'm pretty sure we can rule out a PCI-E bottleneck.
What do you guys think?
EDIT: I realize I've gone down the rabbit hole with this LOL. Frankly, I am completely fascinated that a CPU released 13 years ago can pair up with a modern GPU and do so much good work.
Yet another newbie starter hardware thread...
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 704
- Joined: Tue Dec 04, 2007 6:56 am
- Hardware configuration: Ryzen 7 5700G, 22.40.46 VGA driver; 32GB G-Skill Trident DDR4-3200; Samsung 860EVO 1TB Boot SSD; VelociRaptor 1TB; MSI GTX 1050ti, 551.23 studio driver; BeQuiet FM 550 PSU; Lian Li PC-9F; Win11Pro-64, F@H 8.3.5.
[Suspended] Ryzen 7 3700X, MSI X570MPG, 32GB G-Skill Trident Z DDR4-3600; Corsair MP600 M.2 PCIe Gen4 Boot, Samsung 840EVO-250 SSDs; VelociRaptor 1TB, Raptor 150; MSI GTX 1050ti, 526.98 driver; Kingwin Stryker 500 PSU; Lian Li PC-K7B. Win10Pro-64, F@H 8.3.5. - Location: @Home
- Contact:
Re: Yet another newbie starter hardware thread...
I wouldn't assume a bottleneck after a day or 3 of Folding. There is a lot of variation among WUs and Cores, so you may just have a lower-yielding crop of WUs at this time.
The Pentium-D should be capable of supporting the throughput as well; it just takes a lot more electricity to do it!
The Pentium-D should be capable of supporting the throughput as well; it just takes a lot more electricity to do it!

Ryzen 7 5700G, 22.40.46 VGA driver; MSI GTX 1050ti, 551.23 studio driver
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
Ryzen 7 3700X; MSI GTX 1050ti, 551.23 studio driver [Suspended]
-
- Posts: 2040
- Joined: Sat Dec 01, 2012 3:43 pm
- Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441
Re: Yet another newbie starter hardware thread...
The PentiumD 820 has 2 cores so FAH default install will assign a GPU slot and a CPU slot. Be sure to remove the CPU slot.
-
- Posts: 146
- Joined: Sun Jul 30, 2017 8:40 pm
Re: Yet another newbie starter hardware thread...
Rigs with more than one high-end GPU emit a lot of heat and noise. Two high-end GPUs in a normal sized case could overheat the GPUs and therefore lowering output.
In case you plan to use more than one high-end GPU in the future I would consider an open case and risers to connect the GPUs.
If you plan to put high-end GPUs in a closed case then I would consider GPUs with DHE although their performance is lower than regular cooled GPUs.
In case you plan to use more than one high-end GPU in the future I would consider an open case and risers to connect the GPUs.
If you plan to put high-end GPUs in a closed case then I would consider GPUs with DHE although their performance is lower than regular cooled GPUs.
-
- Posts: 2040
- Joined: Sat Dec 01, 2012 3:43 pm
- Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441
Re: Yet another newbie starter hardware thread...
You can cool two fast GPUs in one closed case. But the mainboard should have 2 pcie slots with much space between. GPUs without DHE exhaust the heat to the side so a perfect case has 2 fans mounted in parallel on the side of the GPUs blowing out. That is more silent than GPUs with DHE.
Re: Yet another newbie starter hardware thread...
Hello again!
Hardware finally all arrived.
PyON 1 ppd
1722748.534969
That's one GTX1080ti and one GTX 1060... for now
Thank you all for the help!
Hardware finally all arrived.
PyON 1 ppd
1722748.534969
That's one GTX1080ti and one GTX 1060... for now

Thank you all for the help!
