Failed uploads of all Wu's from XP Box

[dschief]

Throwing out another idea.

since some are reporting successful uploads from Win 7 & Linux. and xp isnt working to the East Coast, & I can upload to Stanford

is it possible that there are different time-out variables between the various OS flavors

I can tracert to stanford, but times out to SK

[7im]

Problems like this tend to be location specific, even PC specific, otherwise the forum would be swamped by all the XP donors having a similar problem, and so far that hasn't happened.

[bruce]

You didn't answer my question: Do you know how to sneakernet?

Those WUs are not lost until they expire, although the clock is running on QRB.

[dschief]

You didn't answer my question: Do you know how to sneakernet?

Those WUs are not lost until they expire, although the clock is running on QRB.

What I tried did not work. the id's for the stuck wu's was 00 02 & 04

I moved them to a USB stick & copied them to aWin 7 box. on re-starting Fah they were not recognized, None showed as pending in Advanced control Pane.

found the entry for SN on the Wiki; Will turn off the box before doing all of that

[bruce]

For V7, you can't move just the WUs. There's a data base that points to them.

I recommend copying the entire FAH subdirectory (well, you don't need \cores, \logs, \configs) then create a shortcut that has start-in pointing to it and invokes FAHClient. You'll probably want <pause-on-start v=true/>. Note that port 36330 will conflict with the client you probably are running on that machine, so you'll want to stop the other client long enough to perform the uploads or to determine that they don't work from there. (It's possible to change the port number if you want to run both clients on a regular basis, but it's a bit of a pain.)

There's a chance that these WUs did get uploaded but your client didn't delete them because it failed to get the ACK. You might want to post the PRCG and let us check on some/all of them before you try again.

[dschief]

here's 2 from old logs 4-12 & 4-13

10488 ( 2, 56, 2 )

10473 ( 0, 69, 35 )

Have one coming due in a few min on a Win 7 pro /64 box. Will post results here

Good upload 2min 6 sec.

Code: Select all

14:23:19:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
14:23:19:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:10476 run:0 clone:156 gen:199 core:0x18 unit:0x000000f0538b3dba540f4b0536b2d08a
14:23:19:WU00:FS00:Uploading 6.12MiB to 140.163.4.234
14:23:19:WU00:FS00:Connecting to 140.163.4.234:8080
14:23:19:WU02:FS00:Starting
14:23:19:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/jim/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_18.fah/FahCore_18.exe -dir 02 -suffix 01 -version 704 -lifeline 1840 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
14:23:19:WU02:FS00:Started FahCore on PID 3548
14:23:19:WU02:FS00:Core PID:3488
14:23:19:WU02:FS00:FahCore 0x18 started
14:23:19:WU02:FS00:0x18:*********************** Log Started 2015-04-15T14:23:19Z ***********************
14:23:19:WU02:FS00:0x18:Project: 10476 (Run 0, Clone 72, Gen 201)
14:23:19:WU02:FS00:0x18:Unit: 0x0000010f538b3dba53f38145a9778421
14:23:19:WU02:FS00:0x18:CPU: 0x00000000000000000000000000000000
14:23:19:WU02:FS00:0x18:Machine: 0
14:23:19:WU02:FS00:0x18:Reading tar file state.xml
14:23:20:WU02:FS00:0x18:Reading tar file system.xml
14:23:21:WU02:FS00:0x18:Reading tar file integrator.xml
14:23:21:WU02:FS00:0x18:Reading tar file core.xml
14:23:21:WU02:FS00:0x18:Digital signatures verified
14:23:21:WU02:FS00:0x18:Folding@home GPU core18
14:23:21:WU02:FS00:0x18:Version 0.0.3
14:23:25:WU00:FS00:Upload 5.11%
14:23:31:WU00:FS00:Upload 10.22%
14:23:37:WU00:FS00:Upload 15.33%
14:23:43:WU00:FS00:Upload 20.44%
14:23:49:WU00:FS00:Upload 25.55%
14:23:56:WU00:FS00:Upload 30.66%
14:24:02:WU00:FS00:Upload 35.77%
14:24:08:WU00:FS00:Upload 40.88%
14:24:10:WU02:FS00:0x18:Completed 0 out of 5000000 steps (0%)
14:24:10:WU02:FS00:0x18:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
14:24:14:WU00:FS00:Upload 45.99%
14:24:20:WU00:FS00:Upload 51.10%
14:24:26:WU00:FS00:Upload 56.21%
14:24:33:WU00:FS00:Upload 61.31%
14:24:39:WU00:FS00:Upload 66.42%
14:24:45:WU00:FS00:Upload 71.53%
14:24:51:WU00:FS00:Upload 76.64%
14:24:57:WU00:FS00:Upload 81.75%
14:25:03:WU00:FS00:Upload 86.86%
14:25:10:WU00:FS00:Upload 91.97%
14:25:16:WU00:FS00:Upload 97.08%
14:25:25:WU00:FS00:Upload complete
14:25:25:WU00:FS00:Server responded WORK_ACK (400)
14:25:25:WU00:FS00:Final credit estimate, 26878.00 points
14:25:25:WU00:FS00:Cleaning up

win 7 good XP bad!! I'm running out of ideas

[Joe_H]

There's a chance that these WUs did get uploaded but your client didn't delete them because it failed to get the ACK. You might want to post the PRCG and let us check on some/all of them before you try again.

Checked the two WU's just posted and the three mentioned in a prior post on the previous page, none have reports in the database for dschief. A couple of them have failure reports from other folders.

[bruce]

Code: Select all

14:23:19:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
14:23:19:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:10476 run:0 clone:156 gen:199 core:0x18 
14:23:19:WU00:FS00:Uploading 6.12MiB to 140.163.4.234
14:25:25:WU00:FS00:Server responded WORK_ACK (400)
14:25:25:WU00:FS00:Final credit estimate, 26878.00 points
14:25:25:WU00:FS00:Cleaning up

win 7 good XP bad!! I'm running out of ideas

Well, you seem to be right about that.

Hi dschief (team 13761),
Your WU (P10476 R0 C156 G199) was added to the stats database on 2015-04-15 08:08:34 for 26879.5 points of credit.

Does that Win7 box use the same router and ISP connection as the XP box in question?
What kind of security software is on the XP box? Have you tried disabling it temporarily?

[dschief]

Have disable XP firewall and AVG, had no effect on outcome

[dschief]

The XP box only has issues with 140.163.4.xxx ( Sloan Kettering ) everything going to stanford is fine!

what are they doing that is different from Stanford { that only affects XP } since Win 7 works, this is the part that has me baffled.

Box has 10488 (2, 3, 13 ) 140.163.4.235 with 0.0.0.0 listed as CS set to go off around noon local time

I have it set to Finish, so no new downloads. had a notion to uninstall FAH but save the work folder/data then do a fresh install.

Would the new client try to upload the old data, or would I loose the database links?

[dschief]

Success!

Code: Select all

18:28:01:WU00:FS02:0x18:Completed 4850000 out of 5000000 steps (97%)
******************************* Date: 2015-04-15 *******************************
18:40:49:WU00:FS02:0x18:Completed 4900000 out of 5000000 steps (98%)
18:53:09:WU00:FS02:0x18:Completed 4950000 out of 5000000 steps (99%)
19:05:28:WU00:FS02:0x18:Completed 5000000 out of 5000000 steps (100%)
19:05:57:WU00:FS02:0x18:Saving result file logfile_01.txt
19:05:58:WU00:FS02:0x18:Saving result file checkpointState.xml
19:06:00:WU00:FS02:0x18:Saving result file checkpt.crc
19:06:00:WU00:FS02:0x18:Saving result file log.txt
19:06:00:WU00:FS02:0x18:Saving result file positions.xtc
19:06:02:WU00:FS02:0x18:Folding@home Core Shutdown: FINISHED_UNIT
19:06:02:WU00:FS02:FahCore returned: FINISHED_UNIT (100 = 0x64)
19:06:03:WU00:FS02:Sending unit results: id:00 state:SEND error:NO_ERROR project:10488 run:2 clone:3 gen:13 core:0x18 unit:0x00000018538b3dbb54af0acf8e9d0164
19:06:03:WU00:FS02:Uploading 12.60MiB to 140.163.4.235
19:06:03:WU00:FS02:Connecting to 140.163.4.235:8080
19:06:09:WU00:FS02:Upload 2.48%
19:06:15:WU00:FS02:Upload 4.96%
19:06:21:WU00:FS02:Upload 7.44%
19:06:27:WU00:FS02:Upload 9.92%
19:06:33:WU00:FS02:Upload 12.40%
19:06:39:WU00:FS02:Upload 14.88%
19:06:46:WU00:FS02:Upload 17.37%
19:06:52:WU00:FS02:Upload 19.85%
19:06:58:WU00:FS02:Upload 22.33%
19:07:04:WU00:FS02:Upload 24.81%
19:07:10:WU00:FS02:Upload 27.29%
19:07:16:WU00:FS02:Upload 29.77%
19:07:23:WU00:FS02:Upload 32.25%
19:07:29:WU00:FS02:Upload 34.73%
19:07:35:WU00:FS02:Upload 37.21%
19:07:41:WU00:FS02:Upload 39.69%
19:07:47:WU00:FS02:Upload 42.17%
19:07:53:WU00:FS02:Upload 44.65%
19:08:00:WU00:FS02:Upload 47.13%
19:08:06:WU00:FS02:Upload 49.61%
19:08:12:WU00:FS02:Upload 52.10%
19:08:18:WU00:FS02:Upload 54.58%
19:08:24:WU00:FS02:Upload 57.06%
19:08:30:WU00:FS02:Upload 59.54%
19:08:37:WU00:FS02:Upload 62.02%
19:08:43:WU00:FS02:Upload 64.50%
19:08:49:WU00:FS02:Upload 66.98%
19:08:55:WU00:FS02:Upload 69.46%
19:09:01:WU00:FS02:Upload 71.94%
19:09:07:WU00:FS02:Upload 74.42%
19:09:13:WU00:FS02:Upload 76.90%
19:09:20:WU00:FS02:Upload 79.38%
19:09:26:WU00:FS02:Upload 81.86%
19:09:32:WU00:FS02:Upload 84.35%
19:09:38:WU00:FS02:Upload 86.83%
19:09:44:WU00:FS02:Upload 89.31%
19:09:50:WU00:FS02:Upload 91.79%
19:09:57:WU00:FS02:Upload 94.27%
19:10:03:WU00:FS02:Upload 96.75%
19:10:09:WU00:FS02:Upload 99.23%
19:10:21:WU00:FS02:Upload complete
19:10:21:WU00:FS02:Server responded WORK_ACK (400)
19:10:21:WU00:FS02:Final credit estimate, 60060.00 points
19:10:21:WU00:FS02:Cleaning up

I disabled Firewall & AVG before wu finished, before it had been disabled after initial failure, retry's continued to fail.

will continue with new procedure to turn off FW just before completion. May have just stumbled upon a work around

[bruce]

Are you using the Microsoft firewall that's part of XP or are you using a 3rd party product?

[dschief]

Stock XP Pro SP3 FW