Failed to access core package.

Moderators: Site Moderators, FAHC Science Team

davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: Failed to access core package.

Post by davidcoton »

From other messages, including the one above from Joe_H, the fix is to delete and re-install the CPU folding slot using FAHControl (Advanced Control)
@Joe -- from logs posted by others it loops endlessly on core-b0 download failure. The WU never starts and therefore never fails.
Image
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Failed to access core package.

Post by bruce »

davidcoton wrote:The WU never starts and therefore never fails.
Everyone agrees that this does need a permanent fix, even without manual intervention, but I'm not sure your statement is true. I don't remember seeing it happen in V7, but in V6 occasionally the core would report a problem with the WU, re-download the Core, report a problem again, re-download the WU, report a problem again ... and after (i think it was) three tries, move on.

As I said, we need to see the full context.
davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: Failed to access core package.

Post by davidcoton »

Sorry, I wrote slightly loosely. In either case it is the FAHClient code that does or should handle the error, but it is still true that if there is no core, the WU is not started. (Except, possibly, for reading its header to determine the core required.) In the end it's a bug, user intervention should not be required, so the precise state of the WU processing is not important ;)
Image
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Failed to access core package.

Post by bruce »

Although a WU for core bo should never have been assigned to windows, it did happen. Both problems have apparently been fixed. If anyone encounters another occurrence, let us know.
Spongebob25
Posts: 75
Joined: Thu Jul 23, 2009 8:27 pm
Hardware configuration: Asus z490
i7 11700k
32 GB Gskill ram
Evga 2080 XC Black
1 TB Samsung 980 SSD

Re: Failed to access core package.

Post by Spongebob25 »

Having the same problem.

Code: Select all

*********************** Log Started 2014-11-04T22:37:20Z ***********************
22:37:20:************************* Folding@home Client *************************
22:37:20:      Website: http://folding.stanford.edu/
22:37:20:    Copyright: (c) 2009-2014 Stanford University
22:37:20:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
22:37:20:         Args: 
22:37:20:       Config: E:/FAH Data/config.xml
22:37:20:******************************** Build ********************************
22:37:20:      Version: 7.4.4
22:37:20:         Date: Mar 4 2014
22:37:20:         Time: 20:26:54
22:37:20:      SVN Rev: 4130
22:37:20:       Branch: fah/trunk/client
22:37:20:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
22:37:20:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
22:37:20:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
22:37:20:     Platform: win32 XP
22:37:20:         Bits: 32
22:37:20:         Mode: Release
22:37:20:******************************* System ********************************
22:37:20:          CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
22:37:20:       CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
22:37:20:         CPUs: 8
22:37:20:       Memory: 15.95GiB
22:37:20:  Free Memory: 13.82GiB
22:37:20:      Threads: WINDOWS_THREADS
22:37:20:   OS Version: 6.1
22:37:20:  Has Battery: false
22:37:20:   On Battery: false
22:37:20:   UTC Offset: -6
22:37:20:          PID: 2568
22:37:20:          CWD: E:/FAH Data
22:37:20:           OS: Windows 7 Professional
22:37:20:      OS Arch: AMD64
22:37:20:         GPUs: 1
22:37:20:        GPU 0: NVIDIA:3 GK104 [GeForce GTX 660 Ti]
22:37:20:         CUDA: 3.0
22:37:20:  CUDA Driver: 6050
22:37:20:Win32 Service: false
22:37:20:***********************************************************************
22:37:20:<config>
22:37:20:  <!-- Network -->
22:37:20:  <proxy v=':8080'/>
22:37:20:
22:37:20:  <!-- Slot Control -->
22:37:20:  <power v='full'/>
22:37:20:
22:37:20:  <!-- User Information -->
22:37:20:  <passkey v='********************************'/>
22:37:20:  <team v='********'/>
22:37:20:  <user v='*************/>
22:37:20:
22:37:20:  <!-- Folding Slots -->
22:37:20:  <slot id='0' type='GPU'>
22:37:20:    <client-type v='beta'/>
22:37:20:    <paused v='true'/>
22:37:20:  </slot>
22:37:20:</config>
22:37:20:Trying to access database...
22:37:21:Successfully acquired database lock
22:37:21:Enabled folding slot 00: PAUSED gpu:0:GK104 [GeForce GTX 660 Ti] (by user)
22:37:21:Set client configured
22:39:20:FS00:Unpaused
22:39:40:ERROR:WU00:FS00:Exception: Could not get IP address for assign-GPU2.stanford.edu: No such host is known. 
22:39:41:Saving configuration to config.xml
22:39:41:<config>
22:39:41:  <!-- Network -->
22:39:41:  <proxy v=':8080'/>
22:39:41:
22:39:41:  <!-- Slot Control -->
22:39:41:  <power v='full'/>
22:39:41:
22:39:41:  <!-- User Information -->
22:39:41:  <passkey v='********************************'/>
22:39:41:  <team v='********'/>
22:39:41:  <user v='*************'/>
22:39:41:
22:39:41:  <!-- Folding Slots -->
22:39:41:  <slot id='0' type='GPU'>
22:39:41:    <client-type v='beta'/>
22:39:41:  </slot>
22:39:41:</config>
22:39:53:ERROR:WU00:FS00:Exception: Could not get IP address for assign-GPU2.stanford.edu: No such host is known. 
22:40:41:WU00:FS00:Connecting to 171.67.108.200:80
22:40:41:WARNING:WU00:FS00:Failed to get ID from '171.67.108.200:80': 10002: Received short response, expected 8 bytes, got 0
22:40:41:WU00:FS00:Connecting to 171.67.108.204:80
22:40:42:WU00:FS00:Connecting to 171.67.108.200:80
22:40:42:WU00:FS00:Assigned to work server 140.163.4.235
22:40:42:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:GK104 [GeForce GTX 660 Ti] from 140.163.4.235
22:40:42:WU00:FS00:Connecting to 140.163.4.235:8080
22:40:43:WU00:FS00:Downloading 4.19MiB
22:40:45:WU00:FS00:Download complete
22:40:45:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10471 run:0 clone:25 gen:37 core:0x18 unit:0x00000038538b3dbb53bea7f919a065fd
22:40:45:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:40:45:WU00:FS00:Connecting to web.stanford.edu:80
22:40:47:ERROR:WU00:FS00:Exception: Failed to access core package.
22:41:45:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:41:45:WU00:FS00:Connecting to web.stanford.edu:80
22:41:46:ERROR:WU00:FS00:Exception: Failed to access core package.
22:43:22:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:43:22:WU00:FS00:Connecting to web.stanford.edu:80
22:43:22:ERROR:WU00:FS00:Exception: Failed to access core package.
22:45:59:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:45:59:WU00:FS00:Connecting to web.stanford.edu:80
22:46:01:ERROR:WU00:FS00:Exception: Failed to access core package.
22:50:14:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:50:14:WU00:FS00:Connecting to web.stanford.edu:80
22:50:15:ERROR:WU00:FS00:Exception: Failed to access core package.

Image
Spongebob25
Posts: 75
Joined: Thu Jul 23, 2009 8:27 pm
Hardware configuration: Asus z490
i7 11700k
32 GB Gskill ram
Evga 2080 XC Black
1 TB Samsung 980 SSD

Re: Failed to access core package.

Post by Spongebob25 »

I deleted the slot and then re added it. It now seems to be folding but now on core 17. Does core 18 not work on 660 Ti?
Image
davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: Failed to access core package.

Post by davidcoton »

No support here while you are using the beta flag. Post in Beta forum if you're a beta member, if not either apply to join or remove the beta flag.
Image
sco01
Posts: 79
Joined: Sun Mar 21, 2010 8:52 pm
Hardware configuration: Core i7 3930K(C2)@4,2 (1.30v)
Swiftech Apogee Drive II + MCR-H220 Radiator
Asus P9X79
4*4Gb SEC 1600@1866 1.5v
GeForce GTX780ti ref (nztx G10+zalman lq315)
Creative X-Fi Titanium Fatal1ty
Lite-On iHAS124-34
HDD- WD3000GLFS + 2*Hitaсhi HDS723030BLE640 + 2*HDT721010SLA360
case-Corsair Obsidian 700D
PSU - Seasonic Platinum 860W (SS-860XP2)

2) Xeon E5645@4Ghz (1,34v)
ASUS P6T
Thermalright Silver Arrow
Corsair TR3X6G1600C7 (3x2048Mb, 7-7-7-20 1,62v)
GeForce GTX780 ref (nztx G10+corsair H75)
Zotac GTX980 AMP! Edition (ZT-90204-10P)
Hitachi 320Gb HTS543232A7A384
case - Chieftec LBX-03B Dremel edition :-)
PSU - Zalman ZM-850HP+ (Enhance silver)

APC SUA1500RMI2U
APC SUA1500RMI2U

Re: Failed to access core package.

Post by sco01 »

Spongebob25
http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
Page not found

working on 660ti, just now you can not download the kernel probably as always bug
kyleb
Pande Group Member
Posts: 272
Joined: Fri Mar 12, 2010 8:53 pm

Re: Failed to access core package.

Post by kyleb »

Looking into this now
kyleb
Pande Group Member
Posts: 272
Joined: Fri Mar 12, 2010 8:53 pm

Re: Failed to access core package.

Post by kyleb »

Should be fixed now.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Failed to access core package.

Post by 7im »

kyleb wrote:Should be fixed now.
Just to cover all options, is there a version of this FAHCore that should go here as well?

//web.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/beta/
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
kyleb
Pande Group Member
Posts: 272
Joined: Fri Mar 12, 2010 8:53 pm

Re: Failed to access core package.

Post by kyleb »

Fixed now
Kjetil
Posts: 175
Joined: Sat Apr 14, 2012 5:56 pm
Location: Stavanger Norway

Re: Failed to access core package.

Post by Kjetil »

Is core 18 still beta?
Post Reply