can't get gtx 970/980 to fold.

If you think it might be a driver problem, see viewforum.php?f=79

Moderators: Site Moderators, FAHC Science Team

Post Reply
billford
Posts: 1003
Joined: Thu May 02, 2013 8:46 pm
Hardware configuration: Full Time:

2x NVidia GTX 980
1x NVidia GTX 780 Ti
2x 3GHz Core i5 PC (Linux)

Retired:

3.2GHz Core i5 PC (Linux)
3.2GHz Core i5 iMac
2.8GHz Core i5 iMac
2.16GHz Core 2 Duo iMac
2GHz Core 2 Duo MacBook
1.6GHz Core 2 Duo Acer laptop
Location: Near Oxford, United Kingdom
Contact:
Contact billford

Re: can't get gtx 970 to fold.

Post by billford »

It's running Linux :ewink:
Image
Top
Breach
Posts: 204
Joined: Sat Mar 09, 2013 8:07 pm
Location: Brussels, Belgium

Re: can't get gtx 970 to fold.

Post by Breach »

"The easiest way is to check to see if /sys/firmware/efi exists. It does not appear if you booted using traditional BIOS."

Source: http://askubuntu.com/questions/162564/h ... fi-or-bios
Windows 11 x64 / 5800X@5Ghz / 32GB DDR4 3800 CL14 / 4090 FE / Creative Titanium HD / Sennheiser 650 / PSU Corsair AX1200i
Top
billford
Posts: 1003
Joined: Thu May 02, 2013 8:46 pm
Hardware configuration: Full Time:

2x NVidia GTX 980
1x NVidia GTX 780 Ti
2x 3GHz Core i5 PC (Linux)

Retired:

3.2GHz Core i5 PC (Linux)
3.2GHz Core i5 iMac
2.8GHz Core i5 iMac
2.16GHz Core 2 Duo iMac
2GHz Core 2 Duo MacBook
1.6GHz Core 2 Duo Acer laptop
Location: Near Oxford, United Kingdom
Contact:
Contact billford

Re: can't get gtx 970 to fold.

Post by billford »

That's handy, many thanks :)

One of the things I like about Linux is that I don't have to reboot it so often :wink:
Image
Top
Tobben
Posts: 12
Joined: Thu Oct 02, 2014 12:24 pm

Re: can't get gtx 970 to fold.

Post by Tobben »

Breach wrote:"The easiest way is to check to see if /sys/firmware/efi exists. It does not appear if you booted using traditional BIOS."

Source: http://askubuntu.com/questions/162564/h ... fi-or-bios
7im wrote:If you remove the 7950, do you get the same error on the 970?
as a side note, more problems.. i finished two core 15 wu's just fine, but i can't get the 970 to do core 17 wu's.. it keeps failing them for whatever reason.. it doesn't even start to work on them.. no idea what's causing it.
Top
Biffa
Posts: 69
Joined: Sun Nov 16, 2008 11:40 pm
Hardware configuration: RTX2080Ti
Threadripper 1950X
Location: UK
Contact:
Contact Biffa

Re: can't get gtx 970 to fold.

Post by Biffa »

Tobben wrote:
Breach wrote:"The easiest way is to check to see if /sys/firmware/efi exists. It does not appear if you booted using traditional BIOS."

Source: http://askubuntu.com/questions/162564/h ... fi-or-bios
7im wrote:If you remove the 7950, do you get the same error on the 970?
as a side note, more problems.. i finished two core 15 wu's just fine, but i can't get the 970 to do core 17 wu's.. it keeps failing them for whatever reason.. it doesn't even start to work on them.. no idea what's causing it.
Same here.

Lots of reports of them failing popping up today.

Code: Select all

ERROR:exception: Force RMSE error of 640.873 with threshold of 5
Image
Top
btrue
Posts: 7
Joined: Sun Oct 05, 2014 8:54 am

only bad work units on GPU

Post by btrue »

I recently bought a GTX 980 and have been trying to overclock it while using Folding at Home to test the stability. It worked perfectly until today, when it will only get bad work unit errors and will not start folding. I have tried: resetting the 980 to the factory settings, restarting the computer several times, deleting the work unit for the GPU slot, and even re-installing the client. I didn't see much relevant information when I looked on google. I really don't think I damaged the GPU since it has no problem playing games. I don't have any problems with the CPU folding.

Here is the error in the logs. The unit information ID always different, so I know I'm not getting the same work unit.
08:48:00:WU02:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
08:48:00:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
08:48:00:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:13001 run:84 clone:2 gen:17 core:0x17
Top
Tobben
Posts: 12
Joined: Thu Oct 02, 2014 12:24 pm

Re: can't get gtx 970 to fold.

Post by Tobben »

Biffa wrote:Same here.

Lots of reports of them failing popping up today.

Code: Select all

ERROR:exception: Force RMSE error of 640.873 with threshold of 5
yah, that's the same error i have been seeing, i guess there isn't much i ca do then as it isn't a local error, strange that they would just suddenly start failing like that though.. i tried enabling the advanced flag as they said on the main site, but that didn't help at all...
Top
PMM
Posts: 3
Joined: Sun Oct 05, 2014 11:31 am

Re: can't get gtx 970 to fold.

Post by PMM »

My initial issue with my 980 was not having a relivent entry in the GPUs.txt to support the card, thats now updated in the download.
I manually modded though as I brought 980 on release date.

However now as others are seeing core 17 & 18 are broken (from what I can gather a stanford release change in the core version).

I was munching on 17 and 18 cores fines since I brought few weeks back then the AS server changes which then resulted in nothing but core 15 for me PPD plummeted from 300K to below 70K .....and now crunching nothing.

Also on mine Collection Server keeps saying 0.0.0.0
Top
SpanishJohn
Posts: 6
Joined: Sun Oct 05, 2014 12:20 pm

980 SLI WU's keep failing

Post by SpanishJohn »

]Hi guys in new here, a few days ago everything was fine PPD 500000+ now keeps failing WU's on GPUs.

HELP PLZ lol.

Code: Select all

12:10:41:Saving configuration to config.xml
12:10:41:<config>
12:10:41:  <!-- Network -->
12:10:41:  <proxy v=':8080'/>
12:10:41:
12:10:41:  <!-- Slot Control -->
12:10:41:  <power v='full'/>
12:10:41:
12:10:41:  <!-- User Information -->
12:10:41:  <passkey v='********************************'/>
12:10:41:  <team v='111065'/>
12:10:41:  <user v='SpanishJohn'/>
12:10:41:
12:10:41:  <!-- Folding Slots -->
12:10:41:  <slot id='0' type='CPU'/>
12:10:41:  <slot id='1' type='GPU'>
12:10:41:    <client-type v='beta'/>
12:10:41:  </slot>
12:10:41:  <slot id='2' type='GPU'>
12:10:41:    <client-type v='beta'/>
12:10:41:  </slot>
12:10:41:</config>
12:11:17:Saving configuration to config.xml
12:11:17:<config>
12:11:17:  <!-- Network -->
12:11:17:  <proxy v=':8080'/>
12:11:17:
12:11:17:  <!-- Slot Control -->
12:11:17:  <power v='full'/>
12:11:17:
12:11:17:  <!-- User Information -->
12:11:17:  <passkey v='********************************'/>
12:11:17:  <team v='111065'/>
12:11:17:  <user v='SpanishJohn'/>
12:11:17:
12:11:17:  <!-- Folding Slots -->
12:11:17:  <slot id='0' type='CPU'/>
12:11:17:  <slot id='1' type='GPU'>
12:11:17:    <client-type v='beta'/>
12:11:17:  </slot>
12:11:17:  <slot id='2' type='GPU'>
12:11:17:    <client-type v='beta'/>
12:11:17:  </slot>
12:11:17:</config>
12:11:35:WU02:FS01:0x17:ERROR:exception: Force RMSE error of 458.133 with threshold of 5
12:11:35:WU02:FS01:0x17:Saving result file logfile_01.txt
12:11:35:WU02:FS01:0x17:Saving result file log.txt
12:11:35:WU02:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:11:35:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:11:35:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:13000 run:863 clone:0 gen:79 core:0x17 unit:0x00000085538b3db753108f385b7dfe2a
12:11:36:WU02:FS01:Uploading 2.70KiB to 140.163.4.231
12:11:36:WU02:FS01:Connecting to 140.163.4.231:8080
12:11:37:WU02:FS01:Upload complete
12:11:37:WU01:FS01:Connecting to 171.67.108.201:80
12:11:37:WU03:FS02:0x17:ERROR:exception: Force RMSE error of 451.53 with threshold of 5
12:11:37:WU03:FS02:0x17:Saving result file logfile_01.txt
12:11:37:WU03:FS02:0x17:Saving result file log.txt
12:11:37:WU03:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:11:37:WU02:FS01:Server responded WORK_ACK (400)
12:11:37:WU02:FS01:Cleaning up
12:11:38:WARNING:WU03:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:11:38:WU03:FS02:Sending unit results: id:03 state:SEND error:FAULTY project:13001 run:297 clone:1 gen:7 core:0x17 unit:0x0000001d538b3db75328a3e3d1034782
12:11:38:WU03:FS02:Uploading 2.91KiB to 140.163.4.231
12:11:38:WU03:FS02:Connecting to 140.163.4.231:8080
12:11:38:WU02:FS02:Connecting to 171.67.108.201:80
12:11:38:WU03:FS02:Upload complete
12:11:38:WU01:FS01:Assigned to work server 171.64.65.56
12:11:38:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 980] from 171.64.65.56
12:11:38:WU01:FS01:Connecting to 171.64.65.56:8080
12:11:38:WU03:FS02:Server responded WORK_ACK (400)
12:11:38:WU03:FS02:Cleaning up
12:11:39:WU02:FS02:Assigned to work server 171.64.65.56
12:11:39:WU02:FS02:Requesting new work unit for slot 02: READY gpu:1:GM204 [GeForce GTX 980] from 171.64.65.56
12:11:39:WU02:FS02:Connecting to 171.64.65.56:8080
12:11:40:WU01:FS01:Downloading 5.15MiB
12:11:40:WU00:FS00:0xa4:Completed 50000 out of 5000000 steps  (1%)
12:11:40:WU02:FS02:Downloading 4.63MiB
12:11:46:WU02:FS02:Download 95.89%
12:11:46:WU01:FS01:Download 59.49%
12:11:46:WU02:FS02:Download complete
12:11:46:WU02:FS02:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9406 run:425 clone:1 gen:1 core:0x17 unit:0x000000030a3b1e5c533e17812e64ad2a
12:11:46:WU02:FS02:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah
12:11:46:WU02:FS02:Connecting to web.stanford.edu:80
12:11:46:WU02:FS02:FahCore 17: Downloading 2.57MiB
12:11:48:WU01:FS01:Download complete
12:11:48:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9406 run:222 clone:1 gen:25 core:0x17 unit:0x000000350a3b1e5c533df1f5131c3116
12:11:52:WU02:FS02:FahCore 17: 80.26%
12:11:53:WU02:FS02:FahCore 17: Download complete
12:11:53:WU02:FS02:Valid core signature
12:11:53:WU02:FS02:Unpacked 8.68MiB to cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe
12:11:53:WU02:FS02:Starting
12:11:53:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 02 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
12:11:53:WU02:FS02:Started FahCore on PID 2180
12:11:53:WU02:FS02:Core PID:6300
12:11:53:WU02:FS02:FahCore 0x17 started
12:11:54:WU01:FS01:Starting
12:11:54:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 01 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
12:11:54:WU01:FS01:Started FahCore on PID 6584
12:11:54:WU01:FS01:Core PID:1404
12:11:54:WU01:FS01:FahCore 0x17 started
12:11:54:WU02:FS02:0x17:*********************** Log Started 2014-10-05T12:11:54Z ***********************
12:11:54:WU02:FS02:0x17:Project: 9406 (Run 425, Clone 1, Gen 1)
12:11:54:WU02:FS02:0x17:Unit: 0x000000030a3b1e5c533e17812e64ad2a
12:11:54:WU02:FS02:0x17:CPU: 0x00000000000000000000000000000000
12:11:54:WU02:FS02:0x17:Machine: 2
12:11:54:WU02:FS02:0x17:Reading tar file state.xml
12:11:54:WU01:FS01:0x17:*********************** Log Started 2014-10-05T12:11:54Z ***********************
12:11:54:WU01:FS01:0x17:Project: 9406 (Run 222, Clone 1, Gen 25)
12:11:54:WU01:FS01:0x17:Unit: 0x000000350a3b1e5c533df1f5131c3116
12:11:54:WU01:FS01:0x17:CPU: 0x00000000000000000000000000000000
12:11:54:WU01:FS01:0x17:Machine: 1
12:11:54:WU01:FS01:0x17:Reading tar file state.xml
12:11:55:WU02:FS02:0x17:Reading tar file system.xml
12:11:55:WU01:FS01:0x17:Reading tar file system.xml
12:11:55:WU02:FS02:0x17:Reading tar file integrator.xml
12:11:55:WU02:FS02:0x17:Reading tar file core.xml
12:11:55:WU02:FS02:0x17:Digital signatures verified
12:11:55:WU02:FS02:0x17:Folding@home GPU core17
12:11:55:WU02:FS02:0x17:Version 0.0.55
12:11:56:WU01:FS01:0x17:Reading tar file integrator.xml
12:11:56:WU01:FS01:0x17:Reading tar file core.xml
12:11:56:WU01:FS01:0x17:Digital signatures verified
12:11:56:WU01:FS01:0x17:Folding@home GPU core17
12:11:56:WU01:FS01:0x17:Version 0.0.55
12:14:09:WU02:FS02:0x17:ERROR:exception: Force RMSE error of 421.915 with threshold of 5
12:14:09:WU02:FS02:0x17:Saving result file logfile_01.txt
12:14:09:WU02:FS02:0x17:Saving result file log.txt
12:14:09:WU02:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:14:09:WARNING:WU02:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:14:09:WU02:FS02:Sending unit results: id:02 state:SEND error:FAULTY project:9406 run:425 clone:1 gen:1 core:0x17 unit:0x000000030a3b1e5c533e17812e64ad2a
12:14:09:WU02:FS02:Uploading 2.35KiB to 171.64.65.56
12:14:09:WU02:FS02:Connecting to 171.64.65.56:8080
12:14:10:WU03:FS02:Connecting to 171.67.108.201:80
12:14:10:WU02:FS02:Upload complete
12:14:10:WU02:FS02:Server responded WORK_ACK (400)
12:14:10:WU02:FS02:Cleaning up
12:14:11:WU03:FS02:Assigned to work server 171.64.65.56
12:14:11:WU03:FS02:Requesting new work unit for slot 02: READY gpu:1:GM204 [GeForce GTX 980] from 171.64.65.56
12:14:11:WU03:FS02:Connecting to 171.64.65.56:8080
12:14:11:WU03:FS02:Downloading 5.10MiB
12:14:17:WU03:FS02:Download 53.95%
12:14:20:WU03:FS02:Download complete
12:14:20:WU03:FS02:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9406 run:72 clone:0 gen:118 core:0x17 unit:0x000000c90a3b1e5c533dd96fc493a086
12:14:20:WU03:FS02:Starting
12:14:20:WU03:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
12:14:20:WU03:FS02:Started FahCore on PID 5408
12:14:20:WU03:FS02:Core PID:6788
12:14:20:WU03:FS02:FahCore 0x17 started
12:14:21:WU03:FS02:0x17:*********************** Log Started 2014-10-05T12:14:20Z ***********************
12:14:21:WU03:FS02:0x17:Project: 9406 (Run 72, Clone 0, Gen 118)
12:14:21:WU03:FS02:0x17:Unit: 0x000000c90a3b1e5c533dd96fc493a086
12:14:21:WU03:FS02:0x17:CPU: 0x00000000000000000000000000000000
12:14:21:WU03:FS02:0x17:Machine: 2
12:14:21:WU03:FS02:0x17:Reading tar file state.xml
12:14:21:WU03:FS02:0x17:Reading tar file system.xml
12:14:22:WU03:FS02:0x17:Reading tar file integrator.xml
12:14:22:WU03:FS02:0x17:Reading tar file core.xml
12:14:22:WU03:FS02:0x17:Digital signatures verified
12:14:22:WU03:FS02:0x17:Folding@home GPU core17
12:14:22:WU03:FS02:0x17:Version 0.0.55
12:14:40:WU00:FS00:0xa4:Completed 100000 out of 5000000 steps  (2%)
12:14:46:WU01:FS01:0x17:ERROR:exception: Force RMSE error of 626.316 with threshold of 5
12:14:46:WU01:FS01:0x17:Saving result file logfile_01.txt
12:14:46:WU01:FS01:0x17:Saving result file log.txt
12:14:46:WU01:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:14:47:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:14:47:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:9406 run:222 clone:1 gen:25 core:0x17 unit:0x000000350a3b1e5c533df1f5131c3116
12:14:47:WU01:FS01:Uploading 2.35KiB to 171.64.65.56
12:14:47:WU01:FS01:Connecting to 171.64.65.56:8080
12:14:47:WU02:FS01:Connecting to 171.67.108.201:80
12:14:47:WU01:FS01:Upload complete
12:14:47:WU01:FS01:Server responded WORK_ACK (400)
12:14:47:WU01:FS01:Cleaning up
12:14:48:WU02:FS01:Assigned to work server 171.64.65.56
12:14:48:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 980] from 171.64.65.56
12:14:48:WU02:FS01:Connecting to 171.64.65.56:8080
12:14:49:WU02:FS01:Downloading 4.71MiB
12:14:53:WU02:FS01:Download complete
12:14:53:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9406 run:449 clone:1 gen:3 core:0x17 unit:0x000000050a3b1e5c533e1be9e3738347
12:14:53:WU02:FS01:Starting
12:14:53:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 02 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
12:14:53:WU02:FS01:Started FahCore on PID 6060
12:14:53:WU02:FS01:Core PID:5520
12:14:53:WU02:FS01:FahCore 0x17 started
12:14:54:WU02:FS01:0x17:*********************** Log Started 2014-10-05T12:14:54Z ***********************
12:14:54:WU02:FS01:0x17:Project: 9406 (Run 449, Clone 1, Gen 3)
12:14:54:WU02:FS01:0x17:Unit: 0x000000050a3b1e5c533e1be9e3738347
12:14:54:WU02:FS01:0x17:CPU: 0x00000000000000000000000000000000
12:14:54:WU02:FS01:0x17:Machine: 1
12:14:54:WU02:FS01:0x17:Reading tar file state.xml
12:14:55:WU02:FS01:0x17:Reading tar file system.xml
12:14:55:WU02:FS01:0x17:Reading tar file integrator.xml
12:14:55:WU02:FS01:0x17:Reading tar file core.xml
12:14:55:WU02:FS01:0x17:Digital signatures verified
12:14:55:WU02:FS01:0x17:Folding@home GPU core17
12:14:55:WU02:FS01:0x17:Version 0.0.55
12:17:09:WU03:FS02:0x17:ERROR:exception: Force RMSE error of 627.783 with threshold of 5
12:17:09:WU03:FS02:0x17:Saving result file logfile_01.txt
12:17:09:WU03:FS02:0x17:Saving result file log.txt
12:17:09:WU03:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:17:09:WARNING:WU03:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:17:09:WU03:FS02:Sending unit results: id:03 state:SEND error:FAULTY project:9406 run:72 clone:0 gen:118 core:0x17 unit:0x000000c90a3b1e5c533dd96fc493a086
12:17:09:WU03:FS02:Uploading 2.34KiB to 171.64.65.56
12:17:09:WU03:FS02:Connecting to 171.64.65.56:8080
12:17:09:WU01:FS02:Connecting to 171.67.108.201:80
12:17:10:WU03:FS02:Upload complete
12:17:10:WU03:FS02:Server responded WORK_ACK (400)
12:17:10:WU03:FS02:Cleaning up
12:17:10:WU01:FS02:Assigned to work server 171.64.65.56
12:17:10:WU01:FS02:Requesting new work unit for slot 02: READY gpu:1:GM204 [GeForce GTX 980] from 171.64.65.56
12:17:10:WU01:FS02:Connecting to 171.64.65.56:8080
12:17:11:WU01:FS02:Downloading 5.42MiB
12:17:16:WU02:FS01:0x17:ERROR:exception: Force RMSE error of 425.323 with threshold of 5
12:17:16:WU02:FS01:0x17:Saving result file logfile_01.txt
12:17:16:WU02:FS01:0x17:Saving result file log.txt
12:17:16:WU02:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:17:16:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:17:16:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:9406 run:449 clone:1 gen:3 core:0x17 unit:0x000000050a3b1e5c533e1be9e3738347
12:17:16:WU02:FS01:Uploading 2.35KiB to 171.64.65.56
12:17:16:WU02:FS01:Connecting to 171.64.65.56:8080
12:17:17:WU03:FS01:Connecting to 171.67.108.201:80
12:17:18:WU02:FS01:Upload complete
12:17:18:WU02:FS01:Server responded WORK_ACK (400)
12:17:18:WU02:FS01:Cleaning up
12:17:18:WU03:FS01:Assigned to work server 171.64.65.56
12:17:18:WU03:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 980] from 171.64.65.56
12:17:18:WU03:FS01:Connecting to 171.64.65.56:8080
12:17:19:WU01:FS02:Download 57.70%
12:17:19:WU03:FS01:Downloading 5.10MiB
12:17:21:WU01:FS02:Download complete
12:17:21:WU01:FS02:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9406 run:157 clone:1 gen:24 core:0x17 unit:0x0000002d0a3b1e5c533de56a6b21eca9
12:17:21:WU01:FS02:Starting
12:17:21:WU01:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 01 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
12:17:21:WU01:FS02:Started FahCore on PID 1208
12:17:21:WU01:FS02:Core PID:2376
12:17:21:WU01:FS02:FahCore 0x17 started
12:17:22:WU01:FS02:0x17:*********************** Log Started 2014-10-05T12:17:22Z ***********************
12:17:22:WU01:FS02:0x17:Project: 9406 (Run 157, Clone 1, Gen 24)
12:17:22:WU01:FS02:0x17:Unit: 0x0000002d0a3b1e5c533de56a6b21eca9
12:17:22:WU01:FS02:0x17:CPU: 0x00000000000000000000000000000000
12:17:22:WU01:FS02:0x17:Machine: 2
12:17:22:WU01:FS02:0x17:Reading tar file state.xml
12:17:23:WU01:FS02:0x17:Reading tar file system.xml
12:17:23:WU01:FS02:0x17:Reading tar file integrator.xml
12:17:23:WU01:FS02:0x17:Reading tar file core.xml
12:17:23:WU01:FS02:0x17:Digital signatures verified
12:17:23:WU01:FS02:0x17:Folding@home GPU core17
12:17:23:WU01:FS02:0x17:Version 0.0.55
12:17:25:WU03:FS01:Download 55.09%
12:17:29:WU03:FS01:Download complete
12:17:29:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9406 run:389 clone:3 gen:23 core:0x17 unit:0x000000210a3b1e5c533e10cad2a5d30f
12:17:29:WU03:FS01:Starting
12:17:29:WU03:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
12:17:29:WU03:FS01:Started FahCore on PID 5524
12:17:29:WU03:FS01:Core PID:2788
12:17:29:WU03:FS01:FahCore 0x17 started
12:17:29:WU03:FS01:0x17:*********************** Log Started 2014-10-05T12:17:29Z ***********************
12:17:29:WU03:FS01:0x17:Project: 9406 (Run 389, Clone 3, Gen 23)
12:17:29:WU03:FS01:0x17:Unit: 0x000000210a3b1e5c533e10cad2a5d30f
12:17:29:WU03:FS01:0x17:CPU: 0x00000000000000000000000000000000
12:17:29:WU03:FS01:0x17:Machine: 1
12:17:29:WU03:FS01:0x17:Reading tar file state.xml
12:17:30:WU03:FS01:0x17:Reading tar file system.xml
12:17:31:WU03:FS01:0x17:Reading tar file integrator.xml
12:17:31:WU03:FS01:0x17:Reading tar file core.xml
12:17:31:WU03:FS01:0x17:Digital signatures verified
12:17:31:WU03:FS01:0x17:Folding@home GPU core17
12:17:31:WU03:FS01:0x17:Version 0.0.55
12:17:49:WU00:FS00:0xa4:Completed 150000 out of 5000000 steps  (3%)
12:20:22:WU03:FS01:0x17:ERROR:exception: Force RMSE error of 629.107 with threshold of 5
12:20:22:WU03:FS01:0x17:Saving result file logfile_01.txt
12:20:22:WU03:FS01:0x17:Saving result file log.txt
12:20:22:WU03:FS01:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:20:23:WARNING:WU03:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:20:23:WU03:FS01:Sending unit results: id:03 state:SEND error:FAULTY project:9406 run:389 clone:3 gen:23 core:0x17 unit:0x000000210a3b1e5c533e10cad2a5d30f
12:20:23:WU03:FS01:Uploading 2.36KiB to 171.64.65.56
12:20:23:WU03:FS01:Connecting to 171.64.65.56:8080
12:20:23:WU02:FS01:Connecting to 171.67.108.201:80
12:20:23:WU03:FS01:Upload complete
12:20:23:WU03:FS01:Server responded WORK_ACK (400)
12:20:23:WU03:FS01:Cleaning up
12:20:24:WU02:FS01:Assigned to work server 171.64.65.56
12:20:24:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:GM204 [GeForce GTX 980] from 171.64.65.56
12:20:24:WU02:FS01:Connecting to 171.64.65.56:8080
12:20:25:WU02:FS01:Downloading 5.09MiB
12:20:31:WU02:FS01:Download 98.29%
12:20:31:WU02:FS01:Download complete
12:20:31:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9406 run:401 clone:1 gen:1 core:0x17 unit:0x000000070a3b1e5c533e130d75a60818
12:20:31:WU02:FS01:Starting
12:20:31:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 02 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
12:20:31:WU02:FS01:Started FahCore on PID 2592
12:20:31:WU02:FS01:Core PID:7104
12:20:31:WU02:FS01:FahCore 0x17 started
12:20:31:WU02:FS01:0x17:*********************** Log Started 2014-10-05T12:20:31Z ***********************
12:20:31:WU02:FS01:0x17:Project: 9406 (Run 401, Clone 1, Gen 1)
12:20:31:WU02:FS01:0x17:Unit: 0x000000070a3b1e5c533e130d75a60818
12:20:31:WU02:FS01:0x17:CPU: 0x00000000000000000000000000000000
12:20:31:WU02:FS01:0x17:Machine: 1
12:20:31:WU02:FS01:0x17:Reading tar file state.xml
12:20:32:WU02:FS01:0x17:Reading tar file system.xml
12:20:33:WU02:FS01:0x17:Reading tar file integrator.xml
12:20:33:WU02:FS01:0x17:Reading tar file core.xml
12:20:33:WU02:FS01:0x17:Digital signatures verified
12:20:33:WU02:FS01:0x17:Folding@home GPU core17
12:20:33:WU02:FS01:0x17:Version 0.0.55
12:20:35:WU01:FS02:0x17:ERROR:exception: Force RMSE error of 608.721 with threshold of 5
12:20:35:WU01:FS02:0x17:Saving result file logfile_01.txt
12:20:35:WU01:FS02:0x17:Saving result file log.txt
12:20:35:WU01:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:20:35:WARNING:WU01:FS02:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:20:35:WU01:FS02:Sending unit results: id:01 state:SEND error:FAULTY project:9406 run:157 clone:1 gen:24 core:0x17 unit:0x0000002d0a3b1e5c533de56a6b21eca9
12:20:35:WU01:FS02:Uploading 2.35KiB to 171.64.65.56
12:20:35:WU01:FS02:Connecting to 171.64.65.56:8080
12:20:36:WU03:FS02:Connecting to 171.67.108.201:80
12:20:36:WU01:FS02:Upload complete
12:20:36:WU01:FS02:Server responded WORK_ACK (400)
12:20:36:WU01:FS02:Cleaning up
12:20:37:WU03:FS02:Assigned to work server 171.64.65.56
12:20:37:WU03:FS02:Requesting new work unit for slot 02: READY gpu:1:GM204 [GeForce GTX 980] from 171.64.65.56
12:20:37:WU03:FS02:Connecting to 171.64.65.56:8080
12:20:37:WU03:FS02:Downloading 4.54MiB
12:20:43:WU03:FS02:Download 83.94%
12:20:44:WU03:FS02:Download complete
12:20:44:WU03:FS02:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:9406 run:444 clone:1 gen:1 core:0x17 unit:0x000000020a3b1e5c533e1afd538543bc
12:20:44:WU03:FS02:Starting
12:20:44:WU03:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
12:20:44:WU03:FS02:Started FahCore on PID 4584
12:20:44:WU03:FS02:Core PID:4552
12:20:44:WU03:FS02:FahCore 0x17 started
12:20:45:WU03:FS02:0x17:*********************** Log Started 2014-10-05T12:20:44Z ***********************
12:20:45:WU03:FS02:0x17:Project: 9406 (Run 444, Clone 1, Gen 1)
12:20:45:WU03:FS02:0x17:Unit: 0x000000020a3b1e5c533e1afd538543bc
12:20:45:WU03:FS02:0x17:CPU: 0x00000000000000000000000000000000
12:20:45:WU03:FS02:0x17:Machine: 2
12:20:45:WU03:FS02:0x17:Reading tar file state.xml
12:20:45:WU03:FS02:0x17:Reading tar file system.xml
12:20:46:WU03:FS02:0x17:Reading tar file integrator.xml
12:20:46:WU03:FS02:0x17:Reading tar file core.xml
12:20:46:WU03:FS02:0x17:Digital signatures verified
12:20:46:WU03:FS02:0x17:Folding@home GPU core17
12:20:46:WU03:FS02:0x17:Version 0.0.55
12:20:59:WU00:FS00:0xa4:Completed 200000 out of 5000000 steps  (4%)
12:22:54:FS00:Paused
12:22:54:FS01:Paused
12:22:54:FS02:Paused
12:22:54:FS00:Shutting core down
12:22:54:FS01:Shutting core down
12:22:54:FS02:Shutting core down
12:22:54:WU02:FS01:0x17:WARNING:Console control signal 1 on PID 7104
12:22:54:WU02:FS01:0x17:Exiting, please wait. . .
12:22:54:WU03:FS02:0x17:WARNING:Console control signal 1 on PID 4552
12:22:54:WU03:FS02:0x17:Exiting, please wait. . .
12:23:00:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
12:23:06:WU03:FS02:0x17:ERROR:exception: Force RMSE error of 416.92 with threshold of 5
12:23:06:WU03:FS02:0x17:Saving result file logfile_01.txt
12:23:06:WU03:FS02:0x17:Saving result file log.txt
12:23:06:WU03:FS02:0x17:Folding@home Core Shutdown: BAD_WORK_UNIT
12:23:07:WU03:FS02:FahCore returned: INTERRUPTED (102 = 0x66)
12:23:23:WU02:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
12:23:29:Saving configuration to config.xml
12:23:29:<config>
12:23:29:  <!-- Network -->
12:23:29:  <proxy v=':8080'/>
12:23:29:
12:23:29:  <!-- Slot Control -->
12:23:29:  <power v='full'/>
12:23:29:
12:23:29:  <!-- User Information -->
12:23:29:  <passkey v='********************************'/>
12:23:29:  <team v='111065'/>
12:23:29:  <user v='SpanishJohn'/>
12:23:29:
12:23:29:  <!-- Folding Slots -->
12:23:29:  <slot id='0' type='CPU'>
12:23:29:    <paused v='true'/>
12:23:29:  </slot>
12:23:29:  <slot id='1' type='GPU'>
12:23:29:    <client-type v='beta'/>
12:23:29:    <paused v='true'/>
12:23:29:  </slot>
12:23:29:  <slot id='2' type='GPU'>
12:23:29:    <client-type v='beta'/>
12:23:29:    <paused v='true'/>
12:23:29:  </slot>
12:23:29:</config>
12:26:24:FS00:Unpaused
12:26:24:FS01:Unpaused
12:26:24:FS02:Unpaused
12:26:24:WU00:FS00:Starting
12:26:24:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -np 6
12:26:24:WU00:FS00:Started FahCore on PID 2720
12:26:24:WU00:FS00:Core PID:4708
12:26:24:WU00:FS00:FahCore 0xa4 started
12:26:24:WU02:FS01:Starting
12:26:24:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 02 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
12:26:24:WU02:FS01:Started FahCore on PID 4156
12:26:24:WU02:FS01:Core PID:7240
12:26:24:WU02:FS01:FahCore 0x17 started
12:26:24:WU03:FS02:Starting
12:26:24:WU03:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/nick/fah/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_17.fah/FahCore_17.exe -dir 03 -suffix 01 -version 704 -lifeline 3724 -checkpoint 15 -gpu 1 -gpu-vendor nvidia
12:26:24:WU03:FS02:Started FahCore on PID 7284
12:26:24:WU03:FS02:Core PID:7140
12:26:24:WU03:FS02:FahCore 0x17 started
12:26:25:WU00:FS00:0xa4:
12:26:25:WU00:FS00:0xa4:*------------------------------*
12:26:25:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
12:26:25:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
12:26:25:WU00:FS00:0xa4:
12:26:25:WU00:FS00:0xa4:Preparing to commence simulation
12:26:25:WU00:FS00:0xa4:- Looking at optimizations...
12:26:25:WU00:FS00:0xa4:- Files status OK
12:26:25:WU00:FS00:0xa4:- Expanded 117765 -> 266400 (decompressed 226.2 percent)
12:26:25:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=117765 data_size=266400, decompressed_data_size=266400 diff=0
12:26:25:WU00:FS00:0xa4:- Digital signature verified
12:26:25:WU00:FS00:0xa4:
12:26:25:WU00:FS00:0xa4:Project: 6368 (Run 23, Clone 36, Gen 95)
12:26:25:WU00:FS00:0xa4:
12:26:25:WU00:FS00:0xa4:Assembly optimizations on if available.
12:26:25:WU00:FS00:0xa4:Entering M.D.
12:26:25:WU02:FS01:0x17:*********************** Log Started 2014-10-05T12:26:24Z ***********************
12:26:25:WU02:FS01:0x17:Project: 9406 (Run 401, Clone 1, Gen 1)
12:26:25:WU02:FS01:0x17:Unit: 0x000000070a3b1e5c533e130d75a60818
12:26:25:WU02:FS01:0x17:CPU: 0x00000000000000000000000000000000
12:26:25:WU02:FS01:0x17:Machine: 1
12:26:25:WU02:FS01:0x17:Reading tar file state.xml
12:26:25:WU03:FS02:0x17:*********************** Log Started 2014-10-05T12:26:24Z ***********************
12:26:25:WU03:FS02:0x17:Project: 9406 (Run 444, Clone 1, Gen 1)
12:26:25:WU03:FS02:0x17:Unit: 0x000000020a3b1e5c533e1afd538543bc
12:26:25:WU03:FS02:0x17:CPU: 0x00000000000000000000000000000000
12:26:25:WU03:FS02:0x17:Machine: 2
12:26:25:WU03:FS02:0x17:Reading tar file state.xml
12:26:25:WU03:FS02:0x17:Reading tar file system.xml
12:26:25:WU02:FS01:0x17:Reading tar file system.xml
12:26:26:WU03:FS02:0x17:Reading tar file integrator.xml
12:26:26:WU03:FS02:0x17:Reading tar file core.xml
12:26:26:WU03:FS02:0x17:Digital signatures verified
12:26:26:WU03:FS02:0x17:Folding@home GPU core17
12:26:26:WU03:FS02:0x17:Version 0.0.55
12:26:26:WU02:FS01:0x17:Reading tar file integrator.xml
12:26:26:WU02:FS01:0x17:Reading tar file core.xml
12:26:26:WU02:FS01:0x17:Digital signatures verified
12:26:26:WU02:FS01:0x17:Folding@home GPU core17
12:26:26:WU02:FS01:0x17:Version 0.0.55
12:26:30:WU00:FS00:0xa4:Mapping NT from 6 to 6 
12:26:30:WU00:FS00:0xa4:Completed 0 out of 5000000 steps  (0%)
12:26:32:Saving configuration to config.xml
12:26:32:<config>
12:26:32:  <!-- Network -->
12:26:32:  <proxy v=':8080'/>
12:26:32:
12:26:32:  <!-- Slot Control -->
12:26:32:  <power v='full'/>
12:26:32:
12:26:32:  <!-- User Information -->
12:26:32:  <passkey v='********************************'/>
12:26:32:  <team v='111065'/>
12:26:32:  <user v='SpanishJohn'/>
12:26:32:
12:26:32:  <!-- Folding Slots -->
12:26:32:  <slot id='0' type='CPU'/>
12:26:32:  <slot id='1' type='GPU'>
12:26:32:    <client-type v='beta'/>
12:26:32:  </slot>
12:26:32:  <slot id='2' type='GPU'>
12:26:32:    <client-type v='beta'/>
12:26:32:  </slot>
12:26:32:</config>
Top
Kjetil
Posts: 175
Joined: Sat Apr 14, 2012 5:56 pm
Location: Stavanger Norway

Re: can't get gtx 970 to fold.

Post by Kjetil »

billford wrote:It's running Linux :ewink:
Okay, can you fix: can`t get gtx970/980 to fold on linux?
I can`t see it is linux you have.
Top
davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: can't get gtx 970/980 to fold.

Post by davidcoton »

@spanishjohn

No help is available here if you use the beta flag (though I doubt it's relevant).

Either join the beta team and accept the responsibilities there so you can report in the beta forum, or remove the beta flag.
Image
Top
Kjetil
Posts: 175
Joined: Sat Apr 14, 2012 5:56 pm
Location: Stavanger Norway

Re: can't get gtx 970/980 to fold.

Post by Kjetil »

He got help? Are you forum police?
Top
mdk777
Posts: 480
Joined: Fri Dec 21, 2007 4:12 am

Re: can't get gtx 970/980 to fold.

Post by mdk777 »

No help is available here if you use the beta flag (though I doubt it's relevant).
yup not relevant.

Problem is across the board, either due to how the cores initiate with Maxwell or how the servers are responding...

Many cores ran fine a few days ago, and are now refusing to start.

Dr. Panda said that they are working on a software fix...perhaps more news on Monday.
Transparency and Accountability, the necessary foundation of any great endeavor!
Top
davidcoton
Posts: 1094
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Re: can't get gtx 970/980 to fold.

Post by davidcoton »

@kjetil

No, I'm not forum police. I'm trying to help another user get the assistance he needs without risking getting himself or others on the wrong side of the mods.
Probably they are too busy to worry at present, but next time might be different.
Image
Top
Breach
Posts: 204
Joined: Sat Mar 09, 2013 8:07 pm
Location: Brussels, Belgium

Re: can't get gtx 970/980 to fold.

Post by Breach »

If you're asking for Beta support while not being part of the Beta team you just don't get it. It's not like the mods visit you at night for a little chat...
Windows 11 x64 / 5800X@5Ghz / 32GB DDR4 3800 CL14 / 4090 FE / Creative Titanium HD / Sennheiser 650 / PSU Corsair AX1200i
Top
Post Reply

Return to “GPU Projects and FahCores”