I just started running the FAH software very recently - have finished 3 WUs. I didn't know about teams at the time and now I just formed one today. How do I put my original username under the team I just created? And how do I invite others to join my team - I did not enter a website for others to go to as I was unsure if that should be a website of my own or a website that you provide?
Would appreciate help on this, thanks.
Also,
I looked briefly through this forum and see that people want to know what their rank is, and what their points are, etc - what's that all about? Also,what's the advantage of having a team rather than just being anonymous?
Thanks
Join a Team after username created
Moderators: Site Moderators, FAHC Science Team
-
7im
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Join a Team after username created
Hello createYES, welcome to the forum.
Reconfigure the client, and add your team # when prompted. Run the console client with the -config switch to access those setup questions again. Or right click the red icon to configure the GUI client.
Invite whomever you talk to to join, anywhere except this forum. We are team agnostic here so no team promotions here. You would provide your own website if you wanted.
Points and teams provide a friendly competative edge to folding. Teams allow you and your friends to tally your points separate from the large anonymous team. Stanford provides some basic stats on the F@h project page, and there are several 3rd Party stats sites that do some fancy graphs with that same data. Links to EOC and Kakao stats are on the toolbar above. Please note those sites were offline last night due to a hosting outage. They're back now.
Reconfigure the client, and add your team # when prompted. Run the console client with the -config switch to access those setup questions again. Or right click the red icon to configure the GUI client.
Invite whomever you talk to to join, anywhere except this forum. We are team agnostic here so no team promotions here. You would provide your own website if you wanted.
Points and teams provide a friendly competative edge to folding. Teams allow you and your friends to tally your points separate from the large anonymous team. Stanford provides some basic stats on the F@h project page, and there are several 3rd Party stats sites that do some fancy graphs with that same data. Links to EOC and Kakao stats are on the toolbar above. Please note those sites were offline last night due to a hosting outage. They're back now.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Re: Join a Team after username created
I have NO idea what you mean by all that... can you send me a link for where to go to do that?7im wrote: Reconfigure the client, and add your team # when prompted. Run the console client with the -config switch to access those setup questions again. Or right click the red icon to configure the GUI client.
-
7im
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Join a Team after username created
http://fahwiki.net/index.php/How_do_I_r ... options%3F
http://fahwiki.net/index.php/How_do_I_r ... _client%3F
http://fahwiki.net/index.php/How_do_I_r ... _client%3F
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Re: Join a Team after username created
Thanks, that was quick! I've got some reading to do now. I hope I can figure it out from here...