171.67.108.11 & 171.67.108.21 down

Moderators: Site Moderators, FAHC Science Team

JimboPalmer
Posts: 2522
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: 171.67.108.11 & 171.67.108.21 down

Post by JimboPalmer »

Once you remove the GPU slot, you can set the CPU slot to 8
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.67.108.11 & 171.67.108.21 down

Post by bruce »

Right.

Until you upgrade your GPU or they fix that server, you can manually set your CPU for 8 processors rather than 7. Just remember to put it back if you start folding with a GPU again. The change from 7 to 8 will increase your CPU production very slightly, but probably the most significant reason for do it is that some CPU projects are specifically excluded from 7.
barebear
Posts: 127
Joined: Fri Dec 28, 2007 7:11 pm
Hardware configuration: GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor BX80605I7860
16 Gb ram
PNY VCGGTS2501XPB GeForce GTS 250 1GB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Kingston SSDNow V Series SNV425-S2/64GB 2.5" 64GB SATA II Internal Solid State Drive (SSD)

Re: 171.67.108.11 & 171.67.108.21 down

Post by barebear »

Hi Mike -- I removed the GPU slot -- not ready to invest in an upgrade
GIGABYTE GA-P55A-UD3 LGA 1156 Intel P55 SATA 6Gb/s USB 3.0 ATX Intel MB
Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Proc.BX80605I7860
16Gb ram
Napoleon
Posts: 887
Joined: Wed May 26, 2010 2:31 pm
Hardware configuration: Atom330 (overclocked):
Windows 7 Ultimate 64bit
Intel Atom330 dualcore (4 HyperThreads)
NVidia GT430, core_15 work
2x2GB Kingston KVR1333D3N9K2/4G 1333MHz memory kit
Asus AT3IONT-I Deluxe motherboard
Location: Finland

Re: 171.67.108.11 & 171.67.108.21 down

Post by Napoleon »

VijayPande wrote:We've been working to back up that machine and get all of the data off. I think the RAID is about to go and we'll retire that server. With it, that probably means the retirement of core11.
Would it be OK to force pre-Fermi GPUs to do core15 work?

I know core15 is on the way out as well, but at least the folding lifespan of older GPUs could be extended a bit. I won't go into details at this point, but I know it can be done and apparently quite a few pre-Fermi GPUs could fold core15 WUs. Apparently being the operative word... one wouldn't want to produce subtly corrupted results.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 171.67.108.11 & 171.67.108.21 down

Post by 7im »

No need to force anything.

As I recall, core_11 and core_15 had the same level of hardware requirements on NV cards. Series 8xxx and above.

And if so, then this comes down to are there core_15 WUs out available, and are there any AS configured to assign them to this lower end hardware?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.67.108.11 & 171.67.108.21 down

Post by bruce »

Core 11 comes in two species. One is for CUDA and one is for CAL. Core15 is for CUDA but NV has gone through several versions of CUDA and they don't always play nicely together.
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: 171.67.108.11 & 171.67.108.21 down

Post by Joe_H »

As I recall, this was tried over a year ago. The Core_15 projects worked on some pre-Fermi cards, but not others. Which ones did work did not seem to follow any detectable pattern. They usually failed with memtest errors, there was a long thread about that as I recall.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Luscious
Posts: 49
Joined: Sat Oct 13, 2012 6:38 am

Re: 171.67.108.11 & 171.67.108.21 down

Post by Luscious »

I understand the need to upgrade hardware. I understand that new GPU's are more efficient. And I also understand why Core 11 is being placed on the back burner.

But I think pulling the plug on Core 11 is premature considering all that has happened is a server outage. Is it really that difficult to get it back up and running on another box? And if it is running in a server environment, why isn't there any redundancy in cases like this when a certain server does go down?

I've had a pair of 9800GTS cards folding 24/7 for close to 5 years without a hiccup. Many other users out there too also have perfectly working GPU's that are now shelved.

In my case I buy my hardware for long-term, keeping it for 5-6 years. If my best "insurance" for F@H is to invest in Maxwell architecture, I would skip the 750/750Ti and buy an upcoming 800 series card, but these aren't out yet, and probably will only hit shelves Holiday season at the earliest.

So yes, I do intend to upgrade, but until I can, shouldn't Core 11 be kept running for a few more months? At least until the Maxwell stuff becomes mainstream and users like myself have a chance to lock into the newest architecture.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 171.67.108.11 & 171.67.108.21 down

Post by bruce »

FAH has several forms of redundancy.

Data is RAIDed, but even RAID has an occasional failure. Maybe that's what happened here. (I don't know which RAID N?)

Redundancy is also provided by having multiple servers, each with it's own set of project(s) and if you can't get work from one of them, you can be assigned something from another server. In this case, most projects for Core_11 have finished and new projects use newer analysis methods (see Dr. Pande's comment above) and so there aren't enough Core_11 projects to need more than one server ... hence single-point-of-failure, unless you have a newer GPU. :(
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: 171.67.108.11 & 171.67.108.21 down

Post by toTOW »

I think the time has come to find a suitable BOINC project for my two 9800 GTX+ until I am able to replace them by high end Maxwell based GPU and return to FAH ... I think this might be hard to find something really useful for such old GPUs :(
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 171.67.108.11 & 171.67.108.21 down

Post by 7im »

I did the same thing with and old P3 a few years ago. Took it off fah and put it on a non-time sensitive project. But I don't promote or name them here.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Ghetto_Child
Posts: 25
Joined: Wed May 08, 2013 10:07 pm

Re: 171.67.108.11 & 171.67.108.21 down

Post by Ghetto_Child »

if FahCore_11 is being retired, what will be the replacement for pre-Fermi GPUs like a GTX 295? Completing two GPU WUs per hour sounds acceptably efficient to me. How fast is the average GPU WU completed?
toTOW
Site Moderator
Posts: 6349
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: 171.67.108.11 & 171.67.108.21 down

Post by toTOW »

Unfortunately, nothing will replace Core 11 ... and pre-Fermi GPUs will just remain unsupported.

You'll have to set up a plan to replace them if you want to contribute to GPU folding again ... :(
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
katakaio
Posts: 25
Joined: Wed Oct 28, 2009 7:31 pm
Hardware configuration: Intel Core i5-6500 @ 3.2 GHz
EVGA GeForce RTX 2060 6GB XC Ultra
EVGA GeForce GTX 960 4GB FTW

Intel Core i5-3550 @ 3.3 GHz
EVGA GeForce GTX 750 Ti 2GB FTW
Location: Florida

Issues with 171.67.108.201 and 171.64.65.160

Post by katakaio »

Hey folks,

Woke up this morning and found my CPU slot on 7.4.4 happily chugging away while the GPU slot threw the following errors:

Code: Select all

15:04:47:WARNING:WU01:FS02:Failed to get assignment from '171.67.108.201:80': Failed to connect to 171.67.108.201:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
15:04:47:WU01:FS02:Connecting to 171.64.65.160:80
15:04:48:WARNING:WU01:FS02:Failed to get assignment from '171.64.65.160:80': Failed to connect to 171.64.65.160:80: No connection could be made because the target machine actively refused it.
15:04:48:ERROR:WU01:FS02:Exception: Could not get an assignment
I pinged 171.67.108.201 with no success, although I could ping 171.64.65.160. I check the server status page for the first time and was surprised to find neither server listed there. Definitely a rookie when it comes to investigating server issues, but I have done all the usual firewall/router/modem troubleshooting. Any ideas?

Thanks!
Rescue_166
Intel Core i5-6500 @ 3.2 GHz
EVGA GeForce RTX 2060 6GB XC Ultra
EVGA GeForce GTX 960 4GB FTW

Intel Core i5-3550 @ 3.3 GHz
EVGA GeForce GTX 750 Ti 2GB FTW
Joe_H
Site Admin
Posts: 7927
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Issues with 171.67.108.201 and 171.64.65.160

Post by Joe_H »

katakaio wrote:

Code: Select all

15:04:47:WARNING:WU01:FS02:Failed to get assignment from '171.67.108.201:80': Failed to connect to 171.67.108.201:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
15:04:47:WU01:FS02:Connecting to 171.64.65.160:80
15:04:48:WARNING:WU01:FS02:Failed to get assignment from '171.64.65.160:80': Failed to connect to 171.64.65.160:80: No connection could be made because the target machine actively refused it.
15:04:48:ERROR:WU01:FS02:Exception: Could not get an assignment
I pinged 171.67.108.201 with no success, although I could ping 171.64.65.160. I check the server status page for the first time and was surprised to find neither server listed there. Definitely a rookie when it comes to investigating server issues, but I have done all the usual firewall/router/modem troubleshooting. Any ideas?

Thanks!
The two servers you tried to check are assignment servers, a recent change in the Server Status page did not include them in what gets displayed. I have merged your post with others about the same problem, the Work Servers with assignments for older nVidia GPU's went down recently and it appears they may not return.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Post Reply