[tuto]7.3.6,opensuse 12.3,installation
Moderators: Site Moderators, FAHC Science Team
-
- Posts: 212
- Joined: Tue Aug 07, 2012 11:59 am
- Hardware configuration: openSUSE Tumbleweed, x86_64,Asrock B760M-HDV/M.2 D4, Intel Core i3-12100, 16 GB, Intel UHD Graphics 730, NVIDIA GeForce GT 1030, Edup-Love EP-9651GS Wi-Fi Bluetooth, multicard reader USB 3.0 startech.com 35fcreadbu3, Epson XP 7100, Headset Bluetooth 3.0 Philips SHQ7300
[tuto]7.3.6,opensuse 12.3,installation
IN THIS ORDER
as root create in /usr/lib/
a link python2.6 -> /usr/lib/python2.7
using
cd /usr/lib
ln -s /usr/lib/python2.7 python2.6
then
as user open a text console
then
go to to the folder where fah rpm are stored (for me "cd ~/Téléchargements")
then
install the fah rpms ignoring the "python(abi) = 2.6" and "bzip2-libs" error messages because the corresponding packets are well installed by default when installing opensuse
the required password is the root password (administrator)
the root password is your user password if you made an automatically installation or the root password if you choose not using you as administrator
su -c"zypper install fahcontrol-7.3.6-1.noarch.rpm"
su -c"zypper install fahviewer-7.3.6-1.x86_64.rpm"
su -c"zypper install fahclient-7.3.6-1.x86_64.rpm"
ignore the error message about installing the fahclient as a service with checkconfig.
it's not a pb
but
using the old method (checkconfig) instead of systemdctl the daemon (service) is well installed and started during installation but not activated for starting during boot
you must with yast tool activate the fahclient daemon (service)
then
launch fahcontrol
then
go to 'identity" tab
then
as usual fill you fah user id, you fah keypass, the team member you belong to
as root create in /usr/lib/
a link python2.6 -> /usr/lib/python2.7
using
cd /usr/lib
ln -s /usr/lib/python2.7 python2.6
then
as user open a text console
then
go to to the folder where fah rpm are stored (for me "cd ~/Téléchargements")
then
install the fah rpms ignoring the "python(abi) = 2.6" and "bzip2-libs" error messages because the corresponding packets are well installed by default when installing opensuse
the required password is the root password (administrator)
the root password is your user password if you made an automatically installation or the root password if you choose not using you as administrator
su -c"zypper install fahcontrol-7.3.6-1.noarch.rpm"
su -c"zypper install fahviewer-7.3.6-1.x86_64.rpm"
su -c"zypper install fahclient-7.3.6-1.x86_64.rpm"
ignore the error message about installing the fahclient as a service with checkconfig.
it's not a pb
but
using the old method (checkconfig) instead of systemdctl the daemon (service) is well installed and started during installation but not activated for starting during boot
you must with yast tool activate the fahclient daemon (service)
then
launch fahcontrol
then
go to 'identity" tab
then
as usual fill you fah user id, you fah keypass, the team member you belong to
-
- Posts: 11
- Joined: Wed Dec 25, 2013 1:34 am
Re: [tuto]7.3.6,opensuse 12.3,installation
Don't know yet if this has anything to do with the issues the routine above tries to resolve, but when I try to install on OpenSuse 12.3 using either Apper or the Suse installer, I get the following error message:
"nothing provides bzip2-libs needed by fahviewer-7.3.6-1.i686"
I might add that I'm using a 32-bit machine (though I did also download the 32-bit FAH client).
Will doing the above routine solve my problem?
"nothing provides bzip2-libs needed by fahviewer-7.3.6-1.i686"
I might add that I'm using a 32-bit machine (though I did also download the 32-bit FAH client).
Will doing the above routine solve my problem?
-
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: [tuto]7.3.6,opensuse 12.3,installation
No, it won't resolve that message. Fah viewer is optional and you can fold without it. Fold on while we research this.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-
- Posts: 212
- Joined: Tue Aug 07, 2012 11:59 am
- Hardware configuration: openSUSE Tumbleweed, x86_64,Asrock B760M-HDV/M.2 D4, Intel Core i3-12100, 16 GB, Intel UHD Graphics 730, NVIDIA GeForce GT 1030, Edup-Love EP-9651GS Wi-Fi Bluetooth, multicard reader USB 3.0 startech.com 35fcreadbu3, Epson XP 7100, Headset Bluetooth 3.0 Philips SHQ7300
Re: [tuto]7.3.6,opensuse 12.3,installation
install the fah rpms ignoring the "python(abi) = 2.6" and "bzip2-libs" error messages because the corresponding packets are well installed by default when installing opensuse
-
- Posts: 11
- Joined: Wed Dec 25, 2013 1:34 am
-
- Posts: 11
- Joined: Wed Dec 25, 2013 1:34 am
Re: [tuto]7.3.6,opensuse 12.3,installation
OK, I did the linking Python 2.7 with 2.6 thing while logged in as superuser, then after a few false starts I got the other routines to work. I told it to ignore all the dependency issues. In my "start" button under applications --> science both FAHControl and FAHViewer show up. When I click on FAHViewer it runs (shows a globe). However, when I try to run FAHControl ... nothing happens. Also, if I type in fahcontrol on a terminal screen I get a "command not found" error message.
What did I miss?
What did I miss?
-
- Posts: 212
- Joined: Tue Aug 07, 2012 11:59 am
- Hardware configuration: openSUSE Tumbleweed, x86_64,Asrock B760M-HDV/M.2 D4, Intel Core i3-12100, 16 GB, Intel UHD Graphics 730, NVIDIA GeForce GT 1030, Edup-Love EP-9651GS Wi-Fi Bluetooth, multicard reader USB 3.0 startech.com 35fcreadbu3, Epson XP 7100, Headset Bluetooth 3.0 Philips SHQ7300
Re: [tuto]7.3.6,opensuse 12.3,installation
first of all my tuto is for opensuse 12.3
if you plan to install fah with opensuse 13.1 things are different ;
note : this pb occured 2 years ago and is not fixed !
-first we encounter the python pb . creating the link python 2.6 -> python 2.7 has no effect
- second fahclient as service is not added to the services to start during boot
- three fahcontrol fails to launch
-first pb
as root
in /usr/lib/python2.7/site-packages/
create a link "fah -> /usr/lib/python2.6/site-packages/fah"
with kde use dolphin super user mode
go to /usr/lib/python2.7/site-packages/
then
use the option "create/a standard link to a file or a folder"
fill the name with "fah"
fill the the folder path with "/usr/lib/python2.6/site-packages/fah"
do not use the quotes
-second pb
opensuse with 13.1 switches completely to systemd boot manager
fah is compliant with the old boot manager initd
perhaps
. there is an option with command systemctl to create a service but what file to give it ?
. there is an option with systemctl to create a service
with a file defining a service and made for the old command checkconfig --add <conf file>
- third pb
see the first pb solution
if you plan to install fah with opensuse 13.1 things are different ;
note : this pb occured 2 years ago and is not fixed !
-first we encounter the python pb . creating the link python 2.6 -> python 2.7 has no effect
- second fahclient as service is not added to the services to start during boot
- three fahcontrol fails to launch
-first pb
as root
in /usr/lib/python2.7/site-packages/
create a link "fah -> /usr/lib/python2.6/site-packages/fah"
with kde use dolphin super user mode
go to /usr/lib/python2.7/site-packages/
then
use the option "create/a standard link to a file or a folder"
fill the name with "fah"
fill the the folder path with "/usr/lib/python2.6/site-packages/fah"
do not use the quotes
-second pb
opensuse with 13.1 switches completely to systemd boot manager
fah is compliant with the old boot manager initd
perhaps
. there is an option with command systemctl to create a service but what file to give it ?
. there is an option with systemctl to create a service
with a file defining a service and made for the old command checkconfig --add <conf file>
- third pb
see the first pb solution
-
- Posts: 212
- Joined: Tue Aug 07, 2012 11:59 am
- Hardware configuration: openSUSE Tumbleweed, x86_64,Asrock B760M-HDV/M.2 D4, Intel Core i3-12100, 16 GB, Intel UHD Graphics 730, NVIDIA GeForce GT 1030, Edup-Love EP-9651GS Wi-Fi Bluetooth, multicard reader USB 3.0 startech.com 35fcreadbu3, Epson XP 7100, Headset Bluetooth 3.0 Philips SHQ7300
Re: [tuto]7.3.6,opensuse 12.3,installation
i did this
linux-b4lz:/etc/rc.d # chkconfig --add FAHClient
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
FAHClient 0:off 1:off 2:on 3:on 4:on 5:on 6:off
linux-b4lz:/etc/rc.d #
but how to start the service FAHClient ?
in yast service manager FAHClient does not appears .
linux-b4lz:/etc/rc.d # chkconfig --add FAHClient
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
FAHClient 0:off 1:off 2:on 3:on 4:on 5:on 6:off
linux-b4lz:/etc/rc.d #
but how to start the service FAHClient ?
in yast service manager FAHClient does not appears .
-
- Posts: 212
- Joined: Tue Aug 07, 2012 11:59 am
- Hardware configuration: openSUSE Tumbleweed, x86_64,Asrock B760M-HDV/M.2 D4, Intel Core i3-12100, 16 GB, Intel UHD Graphics 730, NVIDIA GeForce GT 1030, Edup-Love EP-9651GS Wi-Fi Bluetooth, multicard reader USB 3.0 startech.com 35fcreadbu3, Epson XP 7100, Headset Bluetooth 3.0 Philips SHQ7300
Re: [tuto]7.3.6,opensuse 12.3,installation
finaly FAHClient appears in service manager
then
i enabled it according to start at boot
and
started it
that's ok
but it takes too much cpu power then i set folding power to "light" and in settings/advanced i reduced cpu usage to 50 %
then
i enabled it according to start at boot
and
started it
that's ok
but it takes too much cpu power then i set folding power to "light" and in settings/advanced i reduced cpu usage to 50 %
-
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: [tuto]7.3.6,opensuse 12.3,installation
What is your CPU Model or how many CPUs do you have? Please note that the CPU Usage slider will not work with the latest FahCores (FahCore_a3 and FahCore_a4) so you can leave that setting to the default of 100%.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
- Posts: 212
- Joined: Tue Aug 07, 2012 11:59 am
- Hardware configuration: openSUSE Tumbleweed, x86_64,Asrock B760M-HDV/M.2 D4, Intel Core i3-12100, 16 GB, Intel UHD Graphics 730, NVIDIA GeForce GT 1030, Edup-Love EP-9651GS Wi-Fi Bluetooth, multicard reader USB 3.0 startech.com 35fcreadbu3, Epson XP 7100, Headset Bluetooth 3.0 Philips SHQ7300
Re: [tuto]7.3.6,opensuse 12.3,installation
thanks to see my new topic viewtopic.php?f=88&t=25514
there is all answers to your questions
there is all answers to your questions
yes i experimented thisthe CPU Usage slider will not work with the latest FahCores (FahCore_a3 and FahCore_a4) so you can leave that setting to the default of 100%.
-
- Posts: 11
- Joined: Wed Dec 25, 2013 1:34 am
Re: [tuto]7.3.6,opensuse 12.3,installation
Thanks, I think I got it working - though as I type this it looks like it's having trouble connecting to the server (late Friday night?)
Gotta get the hang of this new (to me) interface, I had been using the old console version before. This is quite a bit different.
Gotta get the hang of this new (to me) interface, I had been using the old console version before. This is quite a bit different.
-
- Posts: 11
- Joined: Wed Dec 25, 2013 1:34 am
Re: [tuto]7.3.6,opensuse 12.3,installation
OK I'm getting nothing but "connecting" when I run it. On the viewer for "Connection" it's perpetually saying "trying." Are the servers down this weekend, or is my 32-bit machine jinxing me?
-
- Site Moderator
- Posts: 6986
- Joined: Wed Dec 23, 2009 9:33 am
- Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB
Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400 - Location: Land Of The Long White Cloud
- Contact:
Re: [tuto]7.3.6,opensuse 12.3,installation
Please note that 32-bit Linux isn't supported for folding on Nvidia GPUs yet. For CPU folding, it might work. Please post your log file so that we can see your system configuration and F@H settings which will help us in troubleshooting.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time
Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
-
- Posts: 11
- Joined: Wed Dec 25, 2013 1:34 am
Re: [tuto]7.3.6,opensuse 12.3,installation
Where is my log file going to be located?