I am trying to view the folding on the other computers on my LAN. So far I have been unable to get a connection to the other machines.
Take machine 192.168.0.102 for example.
I have verified that the port used by the client is the default, 36330.
There is no password configured.
These are the only items asked for in the configuration on the master FAHClient.
On 192.168.0.102 I have insured that my master computer's IP address (192.168.0.105) can access without a password.
I am obviously missing something but I can't figure out what.
Problem Configuring FAHClient for local LAN
Moderators: Site Moderators, FAHC Science Team
-
P5-133XL
- Posts: 2948
- Joined: Sun Dec 02, 2007 4:36 am
- Hardware configuration: Machine #1:
Intel Q9450; 2x2GB=8GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460; Windows Server 2008 X64 (SP1).
Machine #2:
Intel Q6600; 2x2GB=4GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460 video card; Windows 7 X64.
Machine 3:
Dell Dimension 8400, 3.2GHz P4 4x512GB Ram, Video card GTX 460, Windows 7 X32
I am currently folding just on the 5x GTX 460's for aprox. 70K PPD - Location: Salem. OR USA
Re: Problem Configuring FAHClient for local LAN
In the Advanced Control, click configure and go to the remote access tab.
Make sure that the IP address restriction is set to allow 127.0.0.1 192.168.0.0/24
Make sure that the Passwordless IP address restriction is also set to allow 127.0.0.1 192.168.0.0/24
Click save and restart the client (Important: these settings won't work without a restart!)
Do the same for all clients
On the master machine, you should now be able to add the remote machine successfully.
Make sure that the IP address restriction is set to allow 127.0.0.1 192.168.0.0/24
Make sure that the Passwordless IP address restriction is also set to allow 127.0.0.1 192.168.0.0/24
Click save and restart the client (Important: these settings won't work without a restart!)
Do the same for all clients
On the master machine, you should now be able to add the remote machine successfully.
-
7im
- Posts: 10179
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: Problem Configuring FAHClient for local LAN
Pictorially explained here: https://fah-web.stanford.edu/projects/F ... oteClients
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Re: Problem Configuring FAHClient for local LAN
The wife is using her machine. I will verify the settings tomorrow morning while she's busy.
The restart might be the problem.
The restart might be the problem.