v6 or v7 for old laptop, Ubuntu?

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

Post Reply
Fogtrotter
Posts: 2
Joined: Wed May 01, 2013 11:11 pm

v6 or v7 for old laptop, Ubuntu?

Post by Fogtrotter »

Hi,
I salvaged an old Acer Aspire 3003wlmi (single-cored 1.8GHz CPU, no GPU) and intent to use it for folding only (24/7). I installed Ubuntu 11.10 (which is pretty taugh on the hardware, though) and now it runs v7 client. The overall performance is poor (TPF 50min at best).
I wonder if changing to Ubuntu 10.04 and f@h client 6.02 would help.
Or maybe You have another idea?
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: v6 or v7 for old laptop, Ubuntu?

Post by PantherX »

Welcome to the F@H Forum Fogtrotter,

Since the hardware is old, I would suggest that you install a very light-weight Linux Distro (http://puppylinux.org/main/Overview%20a ... tarted.htm) and use V7. If it can complete the assigned WUs before the Timeout, than you can leave it folding 24/7. If it can't make it before the Timeout Deadline, than it would seem that your hardware is too slow for the current Projects so you might want to retire that laptop from folding.

I have Dual-Cores folding 24/7 (not dedicated) and the TPF varies between 30:00 - 01:45 depending on the Project and I never had a Timeout so I think that your system might make it.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
P5-133XL
Posts: 2948
Joined: Sun Dec 02, 2007 4:36 am
Hardware configuration: Machine #1:

Intel Q9450; 2x2GB=8GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460; Windows Server 2008 X64 (SP1).

Machine #2:

Intel Q6600; 2x2GB=4GB Ram; Gigabyte GA-X48-DS4 Motherboard; PC Power and Cooling Q750 PS; 2x GTX 460 video card; Windows 7 X64.

Machine 3:

Dell Dimension 8400, 3.2GHz P4 4x512GB Ram, Video card GTX 460, Windows 7 X32

I am currently folding just on the 5x GTX 460's for aprox. 70K PPD
Location: Salem. OR USA

Re: v6 or v7 for old laptop, Ubuntu?

Post by P5-133XL »

TPF can not be judged independent to what the project is. Different projects run at different speeds.

You have salvaged a very low end machine, expect it to perform poorly. Changing clients is not going to help for the actual work is done by the folding core, not the client. Changing from Windows to Linux may help some. Picking a light-weight Linux flavor is good since it will not have many parasitic processes so that folding gets everything the processor can give it. Next, laptops have a tendency to down-clock the processor or power off so pay attention to power settings both in the laptop's BIOS and the OS. Run in full mode.
Image
Fogtrotter
Posts: 2
Joined: Wed May 01, 2013 11:11 pm

Re: v6 or v7 for old laptop, Ubuntu?

Post by Fogtrotter »

Thank You, I will check the BIOS and give Puppy a try! My estimated time of completion is already days before timeout, I guess that's a good prognostic.
I also run a desktop with more reasonable hardware, but power consumption is too high to leave it folding all day. PPD/power ratio is surprisingly in favour of laptop, even though its a decade older than the desktop.
Post Reply