HFM.NET - Monitoring Application for Folding@Home v7
Moderator: Site Moderators
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
They do show as Uniprocessor with correct status. And that message 'Could not find log section for slot x' is all over the log. Most of them are for the two UNI slots, but there's some for the GPU slots scattered in there as well.
~~EDIT~~
Here's a screenshot of what I'm seeing 2.5 hours after installing 0.9.0
http://tinypic.com/r/nzhf8x/5
~~EDIT~~
Here's a screenshot of what I'm seeing 2.5 hours after installing 0.9.0
http://tinypic.com/r/nzhf8x/5
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
OK, when you look at the log viewer for either of those Uniprocessor slots does it show the proper log section?
How big is the log file for the local client? You can right-click on any slot and select 'View Cached Log File'.
Can you send me your HFM.log file please? You can find me (harlam357) at gmail.
How big is the log file for the local client? You can right-click on any slot and select 'View Cached Log File'.
Can you send me your HFM.log file please? You can find me (harlam357) at gmail.
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Yes for both.harlam357 wrote:OK, when you look at the log viewer for either of those Uniprocessor slots does it show the proper log section?
92 KB.harlam357 wrote:How big is the log file for the local client? You can right-click on any slot and select 'View Cached Log File'.
You've got mail.harlam357 wrote:Can you send me your HFM.log file please? You can find me (harlam357) at gmail.
-
- Posts: 660
- Joined: Mon Oct 25, 2010 5:57 am
- Hardware configuration: a) Main unit
Sandybridge in HAF922 w/200 mm side fan
--i7 2600K@4.2 GHz
--ASUS P8P67 DeluxeB3
--4GB ADATA 1600 RAM
--750W Corsair PS
--2Seagate Hyb 750&500 GB--WD Caviar Black 1TB
--EVGA 660GTX-Ti FTW - Signature 2 GPU@ 1241 Boost
--MSI GTX560Ti @900MHz
--Win7Home64; FAH V7.3.2; 327.23 drivers
b) 2004 HP a475c desktop, 1 core Pent 4 HT@3.2 GHz; Mem 2GB;HDD 160 GB;Zotac GT430PCI@900 MHz
WinXP SP3-32 FAH v7.3.6 301.42 drivers - GPU slot only
c) 2005 Toshiba M45-S551 laptop w/2 GB mem, 160GB HDD;Pent M 740 CPU @ 1.73 GHz
WinXP SP3-32 FAH v7.3.6 [Receiving Core A4 work units]
d) 2011 lappy-15.6"-1920x1080;i7-2860QM,2.5;IC Diamond Thermal Compound;GTX 560M 1,536MB u/c@700;16GB-1333MHz RAM;HDD:500GBHyb w/ 4GB SSD;Win7HomePrem64;320.18 drivers FAH 7.4.2ß - Location: Saratoga, California USA
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Here's another sample of the v6 smp.
Of course, another hint is the actual calling sequence for the core with the -np 8 parameter for each individual work unit.
[08:46:43] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 01 -np 8 -checkpoint 15 -verbose -lifeline 4296 -version 634'
Of course, another hint is the actual calling sequence for the core with the -np 8 parameter for each individual work unit.
[08:46:43] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 01 -np 8 -checkpoint 15 -verbose -lifeline 4296 -version 634'
Code: Select all
--- Opening Log file [March 20 07:52:34 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Public\Documents\FAH SMP Client
Executable: C:\Users\Public\Documents\FAH SMP Client\FAH6-SMP.exe
Arguments: -smp -bigadv -betateam -verbosity 9
[07:52:34] - Ask before connecting: No
[07:52:34] - User name: GreyWhiskers (Team 0)
[07:52:34] - User ID: 51EA5C9A7EF9D58E
[07:52:34] - Machine ID: 2
[07:52:34]
[07:52:34] Loaded queue successfully.
[07:52:34]
[07:52:34] + Processing work unit
[07:52:34] A4 will attempt to use 8 threads.
[07:52:34] - Autosending finished units... [March 20 07:52:34 UTC]
[07:52:34] Core required: FahCore_a4.exe
[07:52:34] Trying to send all finished work units
[07:52:34] + No unsent completed units remaining.
[07:52:34] Core found.
[07:52:34] - Autosend completed
[07:52:34] Working on queue slot 00 [March 20 07:52:34 UTC]
[07:52:34] + Working ...
[07:52:34] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 00 -np 8 -checkpoint 15 -verbose -lifeline 4296 -version 634'
[07:52:35]
[07:52:35] *------------------------------*
[07:52:35] Folding@Home Gromacs GB Core
[07:52:35] Version 2.27 (Dec. 15, 2010)
[07:52:35]
[07:52:35] Preparing to commence simulation
[07:52:35] - Ensuring status. Please wait.
[07:52:44] - Looking at optimizations...
[07:52:44] - Working with standard loops on this execution.
[07:52:44] - Previous termination of core was improper.
[07:52:44] - Files status OK
[07:52:45] - Expanded 881328 -> 1982628 (decompressed 224.9 percent)
[07:52:45] Called DecompressByteArray: compressed_data_size=881328 data_size=1982628, decompressed_data_size=1982628 diff=0
[07:52:45] - Digital signature verified
[07:52:45]
[07:52:45] Project: 8022 (Run 11, Clone 318, Gen 24)
[07:52:45]
[07:52:45] Entering M.D.
[07:52:51] Using Gromacs checkpoints
[07:52:51] Mapping NT from 8 to 8
[07:52:51] Resuming from checkpoint
[07:52:51] Verified work/wudata_00.log
[07:52:51] Verified work/wudata_00.trr
[07:52:52] Verified work/wudata_00.xtc
[07:52:52] Verified work/wudata_00.edr
[07:52:52] Completed 117540 out of 250000 steps (47%)
[07:54:11] Completed 120000 out of 250000 steps (48%)
[07:55:15] Completed 122500 out of 250000 steps (49%)
[07:56:15] Completed 125000 out of 250000 steps (50%)
[07:57:16] Completed 127500 out of 250000 steps (51%)
[07:58:19] Completed 130000 out of 250000 steps (52%)
[07:59:20] Completed 132500 out of 250000 steps (53%)
[08:00:23] Completed 135000 out of 250000 steps (54%)
[08:01:20] Completed 137500 out of 250000 steps (55%)
[08:02:17] Completed 140000 out of 250000 steps (56%)
[08:03:15] Completed 142500 out of 250000 steps (57%)
[08:04:12] Completed 145000 out of 250000 steps (58%)
[08:05:08] Completed 147500 out of 250000 steps (59%)
[08:06:07] Completed 150000 out of 250000 steps (60%)
[08:07:06] Completed 152500 out of 250000 steps (61%)
[08:08:08] Completed 155000 out of 250000 steps (62%)
[08:09:07] Completed 157500 out of 250000 steps (63%)
[08:10:06] Completed 160000 out of 250000 steps (64%)
[08:11:04] Completed 162500 out of 250000 steps (65%)
[08:12:02] Completed 165000 out of 250000 steps (66%)
[08:13:05] Completed 167500 out of 250000 steps (67%)
[08:14:06] Completed 170000 out of 250000 steps (68%)
[08:15:08] Completed 172500 out of 250000 steps (69%)
[08:16:09] Completed 175000 out of 250000 steps (70%)
[08:17:13] Completed 177500 out of 250000 steps (71%)
[08:18:16] Completed 180000 out of 250000 steps (72%)
[08:19:20] Completed 182500 out of 250000 steps (73%)
[08:20:20] Completed 185000 out of 250000 steps (74%)
[08:21:18] Completed 187500 out of 250000 steps (75%)
[08:22:16] Completed 190000 out of 250000 steps (76%)
[08:23:15] Completed 192500 out of 250000 steps (77%)
[08:24:14] Completed 195000 out of 250000 steps (78%)
[08:25:11] Completed 197500 out of 250000 steps (79%)
[08:26:09] Completed 200000 out of 250000 steps (80%)
[08:27:12] Completed 202500 out of 250000 steps (81%)
[08:28:19] Completed 205000 out of 250000 steps (82%)
[08:29:26] Completed 207500 out of 250000 steps (83%)
[08:30:29] Completed 210000 out of 250000 steps (84%)
[08:31:29] Completed 212500 out of 250000 steps (85%)
[08:32:28] Completed 215000 out of 250000 steps (86%)
[08:33:27] Completed 217500 out of 250000 steps (87%)
[08:34:25] Completed 220000 out of 250000 steps (88%)
[08:35:27] Completed 222500 out of 250000 steps (89%)
[08:36:29] Completed 225000 out of 250000 steps (90%)
[08:37:31] Completed 227500 out of 250000 steps (91%)
[08:38:32] Completed 230000 out of 250000 steps (92%)
[08:39:36] Completed 232500 out of 250000 steps (93%)
[08:40:35] Completed 235000 out of 250000 steps (94%)
[08:41:31] Completed 237500 out of 250000 steps (95%)
[08:42:28] Completed 240000 out of 250000 steps (96%)
[08:43:24] Completed 242500 out of 250000 steps (97%)
[08:44:21] Completed 245000 out of 250000 steps (98%)
[08:45:17] Completed 247500 out of 250000 steps (99%)
[08:46:14] Completed 250000 out of 250000 steps (100%)
[08:46:15] DynamicWrapper: Finished Work Unit: sleep=10000
[08:46:25]
[08:46:25] Finished Work Unit:
[08:46:25] - Reading up to 1299156 from "work/wudata_00.trr": Read 1299156
[08:46:25] trr file hash check passed.
[08:46:25] - Reading up to 786624 from "work/wudata_00.xtc": Read 786624
[08:46:25] xtc file hash check passed.
[08:46:25] edr file hash check passed.
[08:46:25] logfile size: 23582
[08:46:25] Leaving Run
[08:46:27] - Writing 2114766 bytes of core data to disk...
[08:46:27] Done: 2114254 -> 2027580 (compressed to 95.9 percent)
[08:46:27] ... Done.
[08:46:29] - Shutting down core
[08:46:29]
[08:46:29] Folding@home Core Shutdown: FINISHED_UNIT
[08:46:33] CoreStatus = 64 (100)
[08:46:33] Unit 0 finished with 99 percent of time to deadline remaining.
[08:46:33] Updated performance fraction: 0.990169
[08:46:33] Sending work to server
[08:46:33] Project: 8022 (Run 11, Clone 318, Gen 24)
[08:46:33] + Attempting to send results [March 20 08:46:33 UTC]
[08:46:33] - Reading file work/wuresults_00.dat from core
[08:46:33] (Read 2028092 bytes from disk)
[08:46:33] Connecting to http://171.67.108.59:8080/
[08:46:37] Posted data.
[08:46:37] Initial: 0000; - Uploaded at ~495 kB/s
[08:46:37] - Averaged speed for that direction ~449 kB/s
[08:46:37] + Results successfully sent
[08:46:37] Thank you for your contribution to Folding@Home.
[08:46:37] + Number of Units Completed: 885
[08:46:41] Trying to send all finished work units
[08:46:41] + No unsent completed units remaining.
[08:46:41] - Preparing to get new work unit...
[08:46:41] Cleaning up work directory
[08:46:42] + Attempting to get work packet
[08:46:42] Passkey found
[08:46:42] - Will indicate memory of 4076 MB
[08:46:42] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7
[08:46:42] - Connecting to assignment server
[08:46:42] Connecting to http://assign.stanford.edu:8080/
[08:46:42] Posted data.
[08:46:42] Initial: 43AB; - Successful: assigned to (171.67.108.59).
[08:46:42] + News From Folding@Home: Welcome to Folding@Home
[08:46:42] Loaded queue successfully.
[08:46:42] Sent data
[08:46:42] Connecting to http://171.67.108.59:8080/
[08:46:43] Posted data.
[08:46:43] Initial: 0000; - Receiving payload (expected size: 881103)
[08:46:43] Conversation time very short, giving reduced weight in bandwidth avg
[08:46:43] - Downloaded at ~1720 kB/s
[08:46:43] - Averaged speed for that direction ~1020 kB/s
[08:46:43] + Received work.
[08:46:43] Trying to send all finished work units
[08:46:43] + No unsent completed units remaining.
[08:46:43] + Closed connections
[08:46:43]
[08:46:43] + Processing work unit
[08:46:43] A4 will attempt to use 8 threads.
[08:46:43] Core required: FahCore_a4.exe
[08:46:43] Core found.
[08:46:43] Working on queue slot 01 [March 20 08:46:43 UTC]
[08:46:43] + Working ...
[08:46:43] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 01 -np 8 -checkpoint 15 -verbose -lifeline 4296 -version 634'
[08:46:43]
[08:46:43] *------------------------------*
[08:46:43] Folding@Home Gromacs GB Core
[08:46:43] Version 2.27 (Dec. 15, 2010)
[08:46:43]
[08:46:43] Preparing to commence simulation
[08:46:43] - Looking at optimizations...
[08:46:43] - Created dyn
[08:46:43] - Files status OK
[08:46:43] - Expanded 880591 -> 1982628 (decompressed 225.1 percent)
[08:46:43] Called DecompressByteArray: compressed_data_size=880591 data_size=1982628, decompressed_data_size=1982628 diff=0
[08:46:44] - Digital signature verified
[08:46:44]
[08:46:44] Project: 8022 (Run 11, Clone 318, Gen 25)
[08:46:44]
[08:46:44] Assembly optimizations on if available.
[08:46:44] Entering M.D.
[08:46:50] Mapping NT from 8 to 8
[08:46:50] Completed 0 out of 250000 steps (0%)
[08:47:48] Completed 2500 out of 250000 steps (1%)
[08:48:44] Completed 5000 out of 250000 steps (2%)
[08:49:41] Completed 7500 out of 250000 steps (3%)
[08:50:37] Completed 10000 out of 250000 steps (4%)
[08:51:34] Completed 12500 out of 250000 steps (5%)
[08:52:30] Completed 15000 out of 250000 steps (6%)
-
- Posts: 90
- Joined: Sun Sep 19, 2010 9:25 am
- Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz
System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB - Location: Bonn, Germany
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
My fault: The x makes the difference. Originally I saved the config as hfm file, so I couldn't see it in the file selection window.harlam357 wrote:I see the .hfmx file just fine here. Sure you're looking in the right folder? That open file dialog will only show .hfmx files.Fahrenheit451 wrote:I assume it is a bug: If I save the config file and I want to add it in the "Startup & External" > "Load configuration file" I did not see it in the file selection window, even though I'm in the same folder as the config file. So I needed to enter the whole path manually. It's not a big thing as I assume that most HFM users doesn't change their setup and the config file name every day, but it is confusing if you know that you have saved a config file and the application doesn't show you its own file.
@harlam357: I run HFM with Win Vista Ultimate 32bit. If you need additional information please let me know.
But HFM seems to work with both file extensions.
This is how it comes to this side effect: I installed the new version over the previous HFM installation. The old config file "HFM-Config.hfm" was saved in the HFM program folder. After I have added all the clients and want to save the new config file in the same folder, Windows auto complete suggested as file name "HFM-Config.hfm" which I have accepted.
My system specs: (http://foldingforum.org/memberlist.php? ... le&u=16896).
-
- Posts: 90
- Joined: Sun Sep 19, 2010 9:25 am
- Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz
System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB - Location: Bonn, Germany
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Here is one of my log files with A4 single core WU's:harlam357 wrote: Re: v6 and the A4 core. In v7 I can get the client type (Uniprocessor, SMP, GPU) from the v7 client itself. So A4 detects correctly in the main grid with v7. With v6 the client type is determined by a Core > Client Type mapping. Since A4 started out as a Uniprocessor only core, HFM still recognizes v6 clients this way. In fact, to my knowledge, A4 is the only core that allow single or multi-threaded execution. So it just doesn't fit the Core > Client Type mapping that works for every other core. In other words, he's just an odd duck. I have considered adding a Uni/SMP client type. The other option is to go back to the v6 log parsing and add some A4 Uniprocessor/SMP detection. I'd be willing to do this... but I don't have any A4 Uniprocessor and A4 SMP logs from v6 clients with which to test. If someone can provide those I can write the detection.
Code: Select all
--- Opening Log file [March 17 10:45:28 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\USERNAME\AppData\Roaming\Folding@home-x86
Arguments: -advmethods -verbosity 9
[10:45:28] - Ask before connecting: No
[10:45:28] - User name: superduper4711 (Team 0)
[10:45:28] - User ID: ECCE00A5AF7AA44
[10:45:28] - Machine ID: 1
[10:45:28]
[10:45:28] Loaded queue successfully.
[10:45:29] Initialization complete
[10:45:29]
[10:45:29] + Processing work unit
[10:45:29] - Autosending finished units... [March 17 10:45:29 UTC]
[10:45:29] Trying to send all finished work units
[10:45:29] + No unsent completed units remaining.
[10:45:29] - Autosend completed
[10:45:29] Core required: FahCore_a4.exe
[10:45:29] Core found.
[10:45:29] Working on queue slot 00 [March 17 10:45:29 UTC]
[10:45:29] + Working ...
[10:45:29] - Calling '.\FahCore_a4.exe -dir work/ -suffix 00 -checkpoint 6 -verbose -lifeline 5040 -version 623'
[10:45:29]
[10:45:29] *------------------------------*
[10:45:29] Folding@Home Gromacs GB Core
[10:45:29] Version 2.27 (Dec. 15, 2010)
[10:45:29]
[10:45:29] Preparing to commence simulation
[10:45:29] - Looking at optimizations...
[10:45:29] - Files status OK
[10:45:29] - Expanded 583318 -> 1306704 (decompressed 224.0 percent)
[10:45:29] Called DecompressByteArray: compressed_data_size=583318 data_size=1306704, decompressed_data_size=1306704 diff=0
[10:45:29] - Digital signature verified
[10:45:29]
[10:45:29] Project: 8021 (Run 9, Clone 395, Gen 40)
[10:45:29]
[10:45:29] Assembly optimizations on if available.
[10:45:29] Entering M.D.
[10:45:35] Using Gromacs checkpoints
[10:45:35] Mapping NT from 1 to 1
[10:45:35] Resuming from checkpoint
[10:45:35] Verified work/wudata_00.log
[10:45:35] Verified work/wudata_00.trr
[10:45:35] Verified work/wudata_00.xtc
[10:45:35] Verified work/wudata_00.edr
[10:45:36] Completed 96310 out of 250000 steps (38%)
[10:48:43] Completed 97500 out of 250000 steps (39%)
[10:55:06] Completed 100000 out of 250000 steps (40%)
[11:02:10] Completed 102500 out of 250000 steps (41%)
[11:09:21] Completed 105000 out of 250000 steps (42%)
[11:16:29] Completed 107500 out of 250000 steps (43%)
[11:23:40] Completed 110000 out of 250000 steps (44%)
[11:30:09] Completed 112500 out of 250000 steps (45%)
[11:36:23] Completed 115000 out of 250000 steps (46%)
[11:42:39] Completed 117500 out of 250000 steps (47%)
[11:49:00] Completed 120000 out of 250000 steps (48%)
[11:55:28] Completed 122500 out of 250000 steps (49%)
[12:02:02] Completed 125000 out of 250000 steps (50%)
[12:09:14] Completed 127500 out of 250000 steps (51%)
[12:14:59] Completed 130000 out of 250000 steps (52%)
[12:21:56] Completed 132500 out of 250000 steps (53%)
[12:28:34] Completed 135000 out of 250000 steps (54%)
[12:35:32] Completed 137500 out of 250000 steps (55%)
[12:42:43] Completed 140000 out of 250000 steps (56%)
[12:49:10] Completed 142500 out of 250000 steps (57%)
[12:56:21] Completed 145000 out of 250000 steps (58%)
[13:02:55] Completed 147500 out of 250000 steps (59%)
[13:09:49] Completed 150000 out of 250000 steps (60%)
[13:16:51] Completed 152500 out of 250000 steps (61%)
[13:22:43] Completed 155000 out of 250000 steps (62%)
[13:29:52] Completed 157500 out of 250000 steps (63%)
[13:36:03] Completed 160000 out of 250000 steps (64%)
[13:42:17] Completed 162500 out of 250000 steps (65%)
[13:48:33] Completed 165000 out of 250000 steps (66%)
[13:55:41] Completed 167500 out of 250000 steps (67%)
[14:02:27] Completed 170000 out of 250000 steps (68%)
[14:09:42] Completed 172500 out of 250000 steps (69%)
[14:16:56] Completed 175000 out of 250000 steps (70%)
[14:24:07] Completed 177500 out of 250000 steps (71%)
[14:30:20] Completed 180000 out of 250000 steps (72%)
[14:36:38] Completed 182500 out of 250000 steps (73%)
[14:43:00] Completed 185000 out of 250000 steps (74%)
[14:49:27] Completed 187500 out of 250000 steps (75%)
[14:56:02] Completed 190000 out of 250000 steps (76%)
[15:03:15] Completed 192500 out of 250000 steps (77%)
[15:10:20] Completed 195000 out of 250000 steps (78%)
[15:16:02] Completed 197500 out of 250000 steps (79%)
[15:21:39] Completed 200000 out of 250000 steps (80%)
[15:28:35] Completed 202500 out of 250000 steps (81%)
[15:34:22] Completed 205000 out of 250000 steps (82%)
[15:40:28] Completed 207500 out of 250000 steps (83%)
[15:47:37] Completed 210000 out of 250000 steps (84%)
[15:53:15] Completed 212500 out of 250000 steps (85%)
[15:59:11] Completed 215000 out of 250000 steps (86%)
[16:06:18] Completed 217500 out of 250000 steps (87%)
[16:12:29] Completed 220000 out of 250000 steps (88%)
[16:18:33] Completed 222500 out of 250000 steps (89%)
[16:25:25] Completed 225000 out of 250000 steps (90%)
[16:32:09] Completed 227500 out of 250000 steps (91%)
[16:38:39] Completed 230000 out of 250000 steps (92%)
[16:44:31] Completed 232500 out of 250000 steps (93%)
[16:45:27] - Autosending finished units... [March 17 16:45:27 UTC]
[16:45:27] Trying to send all finished work units
[16:45:27] + No unsent completed units remaining.
[16:45:27] - Autosend completed
[16:45:27] + Working...
[16:50:46] Completed 235000 out of 250000 steps (94%)
[16:57:04] Completed 237500 out of 250000 steps (95%)
[17:03:14] Completed 240000 out of 250000 steps (96%)
[17:08:54] Completed 242500 out of 250000 steps (97%)
[17:14:38] Completed 245000 out of 250000 steps (98%)
[17:20:29] Completed 247500 out of 250000 steps (99%)
[17:26:12] Completed 250000 out of 250000 steps (100%)
[17:26:12] DynamicWrapper: Finished Work Unit: sleep=10000
[17:26:22]
[17:26:22] Finished Work Unit:
[17:26:22] - Reading up to 859776 from "work/wudata_00.trr": Read 859776
[17:26:22] trr file hash check passed.
[17:26:22] - Reading up to 512552 from "work/wudata_00.xtc": Read 512552
[17:26:22] xtc file hash check passed.
[17:26:22] edr file hash check passed.
[17:26:22] logfile size: 26831
[17:26:22] Leaving Run
[17:26:27] - Writing 1404563 bytes of core data to disk...
[17:26:28] Done: 1404051 -> 1337865 (compressed to 95.2 percent)
[17:26:28] ... Done.
[17:26:28] - Shutting down core
[17:26:28]
[17:26:28] Folding@home Core Shutdown: FINISHED_UNIT
[17:26:31] CoreStatus = 64 (100)
[17:26:31] Unit 0 finished with 89 percent of time to deadline remaining.
[17:26:31] Updated performance fraction: 0.896835
[17:26:31] Sending work to server
[17:26:31] Project: 8021 (Run 9, Clone 395, Gen 40)
[17:26:31] - Read packet limit of 540015616... Set to 524286976.
[17:26:31] + Attempting to send results [March 17 17:26:31 UTC]
[17:26:31] - Reading file work/wuresults_00.dat from core
[17:26:31] (Read 1338377 bytes from disk)
[17:26:31] Connecting to http://171.67.108.58:8080/
[17:26:51] Posted data.
[17:26:51] Initial: 0000; - Uploaded at ~65 kB/s
[17:26:51] - Averaged speed for that direction ~63 kB/s
[17:26:51] + Results successfully sent
[17:26:51] Thank you for your contribution to Folding@Home.
[17:26:51] + Number of Units Completed: 565
[17:26:55] Trying to send all finished work units
[17:26:55] + No unsent completed units remaining.
[17:26:55] - Preparing to get new work unit...
[17:26:55] + Attempting to get work packet
[17:26:55] - Will indicate memory of 2045 MB
[17:26:55] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[17:26:55] - Connecting to assignment server
[17:26:55] Connecting to http://assign.stanford.edu:8080/
[17:26:56] Posted data.
[17:26:56] Initial: 43AB; - Successful: assigned to (171.67.108.58).
[17:26:56] + News From Folding@Home: Welcome to Folding@Home
[17:26:56] Loaded queue successfully.
[17:26:56] Connecting to http://171.67.108.58:8080/
[17:26:57] Posted data.
[17:26:57] Initial: 0000; - Receiving payload (expected size: 582631)
[17:27:02] - Downloaded at ~113 kB/s
[17:27:02] - Averaged speed for that direction ~175 kB/s
[17:27:02] + Received work.
[17:27:02] Trying to send all finished work units
[17:27:02] + No unsent completed units remaining.
[17:27:02] + Closed connections
[17:27:02]
[17:27:02] + Processing work unit
[17:27:02] Core required: FahCore_a4.exe
[17:27:02] Core found.
[17:27:02] Working on queue slot 01 [March 17 17:27:02 UTC]
[17:27:02] + Working ...
[17:27:02] - Calling '.\FahCore_a4.exe -dir work/ -suffix 01 -checkpoint 6 -verbose -lifeline 5040 -version 623'
[17:27:02]
[17:27:02] *------------------------------*
[17:27:02] Folding@Home Gromacs GB Core
[17:27:02] Version 2.27 (Dec. 15, 2010)
[17:27:02]
[17:27:02] Preparing to commence simulation
[17:27:02] - Looking at optimizations...
[17:27:02] - Created dyn
[17:27:02] - Files status OK
[17:27:02] - Expanded 582119 -> 1304972 (decompressed 224.1 percent)
[17:27:02] Called DecompressByteArray: compressed_data_size=582119 data_size=1304972, decompressed_data_size=1304972 diff=0
[17:27:02] - Digital signature verified
[17:27:02]
[17:27:02] Project: 8021 (Run 2, Clone 32, Gen 43)
[17:27:02]
[17:27:02] Assembly optimizations on if available.
[17:27:02] Entering M.D.
[17:27:08] Mapping NT from 1 to 1
[17:27:08] Completed 0 out of 250000 steps (0%)
[17:34:21] Completed 2500 out of 250000 steps (1%)
[17:41:33] Completed 5000 out of 250000 steps (2%)
[17:48:43] Completed 7500 out of 250000 steps (3%)
[17:55:57] Completed 10000 out of 250000 steps (4%)
[18:03:11] Completed 12500 out of 250000 steps (5%)
[18:10:23] Completed 15000 out of 250000 steps (6%)
[18:17:26] Completed 17500 out of 250000 steps (7%)
[18:24:38] Completed 20000 out of 250000 steps (8%)
[18:31:46] Completed 22500 out of 250000 steps (9%)
[18:38:58] Completed 25000 out of 250000 steps (10%)
[18:45:59] Completed 27500 out of 250000 steps (11%)
[18:51:43] Completed 30000 out of 250000 steps (12%)
[18:58:55] Completed 32500 out of 250000 steps (13%)
[19:06:06] Completed 35000 out of 250000 steps (14%)
[19:13:17] Completed 37500 out of 250000 steps (15%)
[19:19:55] Completed 40000 out of 250000 steps (16%)
[19:27:07] Completed 42500 out of 250000 steps (17%)
[19:34:16] Completed 45000 out of 250000 steps (18%)
[19:41:18] Completed 47500 out of 250000 steps (19%)
[19:48:30] Completed 50000 out of 250000 steps (20%)
[19:55:42] Completed 52500 out of 250000 steps (21%)
[20:02:56] Completed 55000 out of 250000 steps (22%)
[20:08:38] Completed 57500 out of 250000 steps (23%)
[20:15:38] Completed 60000 out of 250000 steps (24%)
[20:22:49] Completed 62500 out of 250000 steps (25%)
[20:29:59] Completed 65000 out of 250000 steps (26%)
[20:37:10] Completed 67500 out of 250000 steps (27%)
[20:44:20] Completed 70000 out of 250000 steps (28%)
[20:51:31] Completed 72500 out of 250000 steps (29%)
[20:58:40] Completed 75000 out of 250000 steps (30%)
[21:05:46] Completed 77500 out of 250000 steps (31%)
[21:13:01] Completed 80000 out of 250000 steps (32%)
[21:20:13] Completed 82500 out of 250000 steps (33%)
[21:27:21] Completed 85000 out of 250000 steps (34%)
[21:34:07] Completed 87500 out of 250000 steps (35%)
[21:41:18] Completed 90000 out of 250000 steps (36%)
[21:48:30] Completed 92500 out of 250000 steps (37%)
[21:55:40] Completed 95000 out of 250000 steps (38%)
[22:02:52] Completed 97500 out of 250000 steps (39%)
[22:10:03] Completed 100000 out of 250000 steps (40%)
[22:17:13] Completed 102500 out of 250000 steps (41%)
[22:24:23] Completed 105000 out of 250000 steps (42%)
[22:31:34] Completed 107500 out of 250000 steps (43%)
[22:38:39] Completed 110000 out of 250000 steps (44%)
[22:45:26] - Autosending finished units... [March 17 22:45:26 UTC]
[22:45:26] Trying to send all finished work units
[22:45:26] + No unsent completed units remaining.
[22:45:26] - Autosend completed
[22:45:26] + Working...
[22:45:42] Completed 112500 out of 250000 steps (45%)
[22:52:05] Completed 115000 out of 250000 steps (46%)
[22:58:50] Completed 117500 out of 250000 steps (47%)
[23:04:48] Completed 120000 out of 250000 steps (48%)
[23:11:24] Completed 122500 out of 250000 steps (49%)
[23:17:25] Completed 125000 out of 250000 steps (50%)
[23:23:48] Completed 127500 out of 250000 steps (51%)
[23:31:00] Completed 130000 out of 250000 steps (52%)
[23:38:11] Completed 132500 out of 250000 steps (53%)
[23:45:20] Completed 135000 out of 250000 steps (54%)
[23:52:30] Completed 137500 out of 250000 steps (55%)
[23:59:35] Completed 140000 out of 250000 steps (56%)
[00:06:00] Completed 142500 out of 250000 steps (57%)
[00:12:19] Completed 145000 out of 250000 steps (58%)
[00:19:28] Completed 147500 out of 250000 steps (59%)
[00:26:39] Completed 150000 out of 250000 steps (60%)
[00:33:49] Completed 152500 out of 250000 steps (61%)
[00:40:59] Completed 155000 out of 250000 steps (62%)
[00:48:09] Completed 157500 out of 250000 steps (63%)
[00:55:21] Completed 160000 out of 250000 steps (64%)
[01:03:16] Completed 162500 out of 250000 steps (65%)
[01:10:28] Completed 165000 out of 250000 steps (66%)
[01:17:40] Completed 167500 out of 250000 steps (67%)
[01:24:51] Completed 170000 out of 250000 steps (68%)
[01:31:59] Completed 172500 out of 250000 steps (69%)
[01:38:40] Completed 175000 out of 250000 steps (70%)
[01:44:25] Completed 177500 out of 250000 steps (71%)
[01:50:19] Completed 180000 out of 250000 steps (72%)
[01:57:26] Completed 182500 out of 250000 steps (73%)
[02:03:03] Completed 185000 out of 250000 steps (74%)
[02:08:57] Completed 187500 out of 250000 steps (75%)
[02:15:32] Completed 190000 out of 250000 steps (76%)
[02:22:10] Completed 192500 out of 250000 steps (77%)
[02:28:52] Completed 195000 out of 250000 steps (78%)
[02:35:20] Completed 197500 out of 250000 steps (79%)
[02:41:14] Completed 200000 out of 250000 steps (80%)
[02:47:27] Completed 202500 out of 250000 steps (81%)
[02:53:22] Completed 205000 out of 250000 steps (82%)
[02:59:20] Completed 207500 out of 250000 steps (83%)
[03:05:15] Completed 210000 out of 250000 steps (84%)
[03:10:53] Completed 212500 out of 250000 steps (85%)
[03:16:46] Completed 215000 out of 250000 steps (86%)
[03:22:40] Completed 217500 out of 250000 steps (87%)
[03:29:15] Completed 220000 out of 250000 steps (88%)
[03:36:26] Completed 222500 out of 250000 steps (89%)
[03:43:13] Completed 225000 out of 250000 steps (90%)
[03:49:31] Completed 227500 out of 250000 steps (91%)
[03:56:37] Completed 230000 out of 250000 steps (92%)
[04:03:39] Completed 232500 out of 250000 steps (93%)
[04:10:19] Completed 235000 out of 250000 steps (94%)
[04:17:17] Completed 237500 out of 250000 steps (95%)
[04:24:06] Completed 240000 out of 250000 steps (96%)
[04:31:08] Completed 242500 out of 250000 steps (97%)
[04:37:13] Completed 245000 out of 250000 steps (98%)
[04:44:14] Completed 247500 out of 250000 steps (99%)
[04:45:25] - Autosending finished units... [March 18 04:45:25 UTC]
[04:45:25] Trying to send all finished work units
[04:45:25] + No unsent completed units remaining.
[04:45:25] - Autosend completed
[04:45:25] + Working...
[04:50:07] Completed 250000 out of 250000 steps (100%)
[04:50:08] DynamicWrapper: Finished Work Unit: sleep=10000
[04:50:18]
[04:50:18] Finished Work Unit:
[04:50:18] - Reading up to 858480 from "work/wudata_01.trr": Read 858480
[04:50:18] trr file hash check passed.
[04:50:18] - Reading up to 507888 from "work/wudata_01.xtc": Read 507888
[04:50:18] xtc file hash check passed.
[04:50:18] edr file hash check passed.
[04:50:18] logfile size: 26144
[04:50:18] Leaving Run
[04:50:20] - Writing 1397916 bytes of core data to disk...
[04:50:20] Done: 1397404 -> 1331227 (compressed to 95.2 percent)
[04:50:20] ... Done.
[04:50:20] - Shutting down core
[04:50:20]
[04:50:20] Folding@home Core Shutdown: FINISHED_UNIT
[04:50:24] CoreStatus = 64 (100)
[04:50:24] Unit 1 finished with 89 percent of time to deadline remaining.
[04:50:24] Updated performance fraction: 0.895649
[04:50:24] Sending work to server
[04:50:24] Project: 8021 (Run 2, Clone 32, Gen 43)
[04:50:24] - Read packet limit of 540015616... Set to 524286976.
[04:50:24] + Attempting to send results [March 18 04:50:24 UTC]
[04:50:24] - Reading file work/wuresults_01.dat from core
[04:50:24] (Read 1331739 bytes from disk)
[04:50:24] Connecting to http://171.67.108.58:8080/
[04:50:45] Posted data.
[04:50:45] Initial: 0000; - Uploaded at ~61 kB/s
[04:50:45] - Averaged speed for that direction ~62 kB/s
[04:50:45] + Results successfully sent
[04:50:45] Thank you for your contribution to Folding@Home.
[04:50:45] + Number of Units Completed: 566
[04:50:49] Trying to send all finished work units
[04:50:49] + No unsent completed units remaining.
[04:50:49] - Preparing to get new work unit...
[04:50:49] + Attempting to get work packet
[04:50:49] - Will indicate memory of 2045 MB
[04:50:49] - Connecting to assignment server
[04:50:49] Connecting to http://assign.stanford.edu:8080/
[04:50:51] Posted data.
[04:50:51] Initial: 43AB; - Successful: assigned to (171.67.108.58).
[04:50:51] + News From Folding@Home: Welcome to Folding@Home
[04:50:51] Loaded queue successfully.
[04:50:51] Connecting to http://171.67.108.58:8080/
[04:50:52] Posted data.
[04:50:52] Initial: 0000; - Receiving payload (expected size: 584030)
[04:50:54] - Downloaded at ~285 kB/s
[04:50:54] - Averaged speed for that direction ~197 kB/s
[04:50:54] + Received work.
[04:50:54] Trying to send all finished work units
[04:50:54] + No unsent completed units remaining.
[04:50:54] + Closed connections
[04:50:54]
[04:50:54] + Processing work unit
[04:50:54] Core required: FahCore_a4.exe
[04:50:54] Core found.
[04:50:54] Working on queue slot 02 [March 18 04:50:54 UTC]
[04:50:54] + Working ...
[04:50:54] - Calling '.\FahCore_a4.exe -dir work/ -suffix 02 -checkpoint 6 -verbose -lifeline 5040 -version 623'
[04:50:54]
[04:50:54] *------------------------------*
[04:50:54] Folding@Home Gromacs GB Core
[04:50:54] Version 2.27 (Dec. 15, 2010)
[04:50:54]
[04:50:54] Preparing to commence simulation
[04:50:54] - Looking at optimizations...
[04:50:54] - Created dyn
[04:50:54] - Files status OK
[04:50:55] - Expanded 583518 -> 1306992 (decompressed 223.9 percent)
[04:50:55] Called DecompressByteArray: compressed_data_size=583518 data_size=1306992, decompressed_data_size=1306992 diff=0
[04:50:55] - Digital signature verified
[04:50:55]
[04:50:55] Project: 8021 (Run 0, Clone 636, Gen 17)
[04:50:55]
[04:50:55] Assembly optimizations on if available.
[04:50:55] Entering M.D.
[04:51:01] Mapping NT from 1 to 1
[04:51:01] Completed 0 out of 250000 steps (0%)
[04:57:58] Completed 2500 out of 250000 steps (1%)
[05:04:37] Completed 5000 out of 250000 steps (2%)
[05:10:28] Completed 7500 out of 250000 steps (3%)
[05:16:57] Completed 10000 out of 250000 steps (4%)
[05:23:22] Completed 12500 out of 250000 steps (5%)
[05:29:13] Completed 15000 out of 250000 steps (6%)
[05:35:23] Completed 17500 out of 250000 steps (7%)
[05:41:27] Completed 20000 out of 250000 steps (8%)
[05:47:17] Completed 22500 out of 250000 steps (9%)
[05:53:05] Completed 25000 out of 250000 steps (10%)
[05:58:51] Completed 27500 out of 250000 steps (11%)
[06:04:37] Completed 30000 out of 250000 steps (12%)
[06:10:23] Completed 32500 out of 250000 steps (13%)
[06:16:13] Completed 35000 out of 250000 steps (14%)
[06:22:46] Completed 37500 out of 250000 steps (15%)
[06:28:59] Completed 40000 out of 250000 steps (16%)
[06:34:45] Completed 42500 out of 250000 steps (17%)
[06:40:22] Completed 45000 out of 250000 steps (18%)
[06:46:07] Completed 47500 out of 250000 steps (19%)
[06:51:53] Completed 50000 out of 250000 steps (20%)
[06:57:39] Completed 52500 out of 250000 steps (21%)
[07:03:53] Completed 55000 out of 250000 steps (22%)
[07:10:07] Completed 57500 out of 250000 steps (23%)
[07:16:25] Completed 60000 out of 250000 steps (24%)
[07:22:13] Completed 62500 out of 250000 steps (25%)
[07:28:28] Completed 65000 out of 250000 steps (26%)
[07:34:49] Completed 67500 out of 250000 steps (27%)
[07:41:13] Completed 70000 out of 250000 steps (28%)
[07:47:22] Completed 72500 out of 250000 steps (29%)
[07:53:08] Completed 75000 out of 250000 steps (30%)
[07:58:59] Completed 77500 out of 250000 steps (31%)
[08:05:19] Completed 80000 out of 250000 steps (32%)
[08:11:29] Completed 82500 out of 250000 steps (33%)
[08:17:21] Completed 85000 out of 250000 steps (34%)
[08:23:39] Completed 87500 out of 250000 steps (35%)
[08:30:26] Completed 90000 out of 250000 steps (36%)
[08:37:15] Completed 92500 out of 250000 steps (37%)
[08:44:05] Completed 95000 out of 250000 steps (38%)
[08:51:13] Completed 97500 out of 250000 steps (39%)
[08:57:07] Completed 100000 out of 250000 steps (40%)
[09:03:41] Completed 102500 out of 250000 steps (41%)
[09:09:33] Completed 105000 out of 250000 steps (42%)
[09:16:08] Completed 107500 out of 250000 steps (43%)
[09:22:52] Completed 110000 out of 250000 steps (44%)
[09:28:46] Completed 112500 out of 250000 steps (45%)
[09:34:38] Completed 115000 out of 250000 steps (46%)
[09:40:31] Completed 117500 out of 250000 steps (47%)
[09:46:25] Completed 120000 out of 250000 steps (48%)
[09:52:03] Completed 122500 out of 250000 steps (49%)
[09:57:58] Completed 125000 out of 250000 steps (50%)
[10:05:10] Completed 127500 out of 250000 steps (51%)
[10:12:22] Completed 130000 out of 250000 steps (52%)
[10:18:36] Completed 132500 out of 250000 steps (53%)
[10:24:49] Completed 135000 out of 250000 steps (54%)
[10:31:43] Completed 137500 out of 250000 steps (55%)
[10:38:42] Completed 140000 out of 250000 steps (56%)
[10:45:24] - Autosending finished units... [March 18 10:45:24 UTC]
[10:45:24] Trying to send all finished work units
[10:45:24] + No unsent completed units remaining.
[10:45:24] - Autosend completed
[10:45:24] + Working...
[10:45:42] Completed 142500 out of 250000 steps (57%)
[10:52:14] Completed 145000 out of 250000 steps (58%)
[10:58:25] Completed 147500 out of 250000 steps (59%)
[11:05:32] Completed 150000 out of 250000 steps (60%)
[11:11:59] Completed 152500 out of 250000 steps (61%)
[11:18:41] Completed 155000 out of 250000 steps (62%)
[11:25:22] Completed 157500 out of 250000 steps (63%)
[11:31:23] Completed 160000 out of 250000 steps (64%)
[11:37:14] Completed 162500 out of 250000 steps (65%)
[11:43:06] Completed 165000 out of 250000 steps (66%)
[11:49:03] Completed 167500 out of 250000 steps (67%)
[11:55:59] Completed 170000 out of 250000 steps (68%)
[12:01:50] Completed 172500 out of 250000 steps (69%)
[12:07:37] Completed 175000 out of 250000 steps (70%)
[12:14:24] Completed 177500 out of 250000 steps (71%)
[12:21:22] Completed 180000 out of 250000 steps (72%)
[12:28:19] Completed 182500 out of 250000 steps (73%)
[12:35:21] Completed 185000 out of 250000 steps (74%)
[12:42:30] Completed 187500 out of 250000 steps (75%)
[12:49:33] Completed 190000 out of 250000 steps (76%)
[12:56:34] Completed 192500 out of 250000 steps (77%)
[13:03:28] Completed 195000 out of 250000 steps (78%)
[13:10:27] Completed 197500 out of 250000 steps (79%)
[13:17:28] Completed 200000 out of 250000 steps (80%)
[13:24:29] Completed 202500 out of 250000 steps (81%)
[13:31:30] Completed 205000 out of 250000 steps (82%)
[13:38:33] Completed 207500 out of 250000 steps (83%)
[13:45:28] Completed 210000 out of 250000 steps (84%)
[13:52:28] Completed 212500 out of 250000 steps (85%)
[13:59:32] Completed 215000 out of 250000 steps (86%)
[14:06:35] Completed 217500 out of 250000 steps (87%)
[14:13:29] Completed 220000 out of 250000 steps (88%)
[14:20:30] Completed 222500 out of 250000 steps (89%)
[14:27:27] Completed 225000 out of 250000 steps (90%)
[14:34:23] Completed 227500 out of 250000 steps (91%)
[14:41:26] Completed 230000 out of 250000 steps (92%)
[14:48:27] Completed 232500 out of 250000 steps (93%)
[14:55:18] Completed 235000 out of 250000 steps (94%)
[15:02:22] Completed 237500 out of 250000 steps (95%)
[15:09:27] Completed 240000 out of 250000 steps (96%)
[15:16:34] Completed 242500 out of 250000 steps (97%)
[15:23:19] Completed 245000 out of 250000 steps (98%)
[15:29:19] Completed 247500 out of 250000 steps (99%)
[15:36:21] Completed 250000 out of 250000 steps (100%)
[15:36:21] DynamicWrapper: Finished Work Unit: sleep=10000
[15:36:31]
[15:36:31] Finished Work Unit:
[15:36:31] - Reading up to 859992 from "work/wudata_02.trr": Read 859992
[15:36:31] trr file hash check passed.
[15:36:31] - Reading up to 511696 from "work/wudata_02.xtc": Read 511696
[15:36:31] xtc file hash check passed.
[15:36:31] edr file hash check passed.
[15:36:31] logfile size: 25654
[15:36:31] Leaving Run
[15:36:35] - Writing 1402746 bytes of core data to disk...
[15:36:36] Done: 1402234 -> 1336580 (compressed to 95.3 percent)
[15:36:36] ... Done.
[15:36:36] - Shutting down core
[15:36:36]
[15:36:36] Folding@home Core Shutdown: FINISHED_UNIT
[15:36:38] CoreStatus = 64 (100)
[15:36:38] Unit 2 finished with 90 percent of time to deadline remaining.
[15:36:38] Updated performance fraction: 0.895902
[15:36:38] Sending work to server
[15:36:38] Project: 8021 (Run 0, Clone 636, Gen 17)
[15:36:38] - Read packet limit of 540015616... Set to 524286976.
[15:36:38] + Attempting to send results [March 18 15:36:38 UTC]
[15:36:38] - Reading file work/wuresults_02.dat from core
[15:36:38] (Read 1337092 bytes from disk)
[15:36:38] Connecting to http://171.67.108.58:8080/
[15:37:01] Posted data.
[15:37:01] Initial: 0000; - Uploaded at ~56 kB/s
[15:37:01] - Averaged speed for that direction ~61 kB/s
[15:37:01] + Results successfully sent
[15:37:01] Thank you for your contribution to Folding@Home.
[15:37:01] + Number of Units Completed: 567
[15:37:05] Trying to send all finished work units
[15:37:05] + No unsent completed units remaining.
[15:37:05] - Preparing to get new work unit...
[15:37:05] + Attempting to get work packet
[15:37:05] - Will indicate memory of 2045 MB
[15:37:05] - Connecting to assignment server
[15:37:05] Connecting to http://assign.stanford.edu:8080/
[15:37:06] Posted data.
[15:37:06] Initial: 43AB; - Successful: assigned to (171.67.108.58).
[15:37:06] + News From Folding@Home: Welcome to Folding@Home
[15:37:06] Loaded queue successfully.
[15:37:06] Connecting to http://171.67.108.58:8080/
[15:37:07] Posted data.
[15:37:07] Initial: 0000; - Receiving payload (expected size: 582902)
[15:37:10] - Downloaded at ~189 kB/s
[15:37:10] - Averaged speed for that direction ~195 kB/s
[15:37:10] + Received work.
[15:37:10] Trying to send all finished work units
[15:37:10] + No unsent completed units remaining.
[15:37:10] + Closed connections
[15:37:10]
[15:37:10] + Processing work unit
[15:37:10] Core required: FahCore_a4.exe
[15:37:10] Core found.
[15:37:10] Working on queue slot 03 [March 18 15:37:10 UTC]
[15:37:10] + Working ...
[15:37:10] - Calling '.\FahCore_a4.exe -dir work/ -suffix 03 -checkpoint 6 -verbose -lifeline 5040 -version 623'
[15:37:10]
[15:37:10] *------------------------------*
[15:37:10] Folding@Home Gromacs GB Core
[15:37:10] Version 2.27 (Dec. 15, 2010)
[15:37:10]
[15:37:10] Preparing to commence simulation
[15:37:10] - Looking at optimizations...
[15:37:10] - Created dyn
[15:37:10] - Files status OK
[15:37:11] - Expanded 582390 -> 1304120 (decompressed 223.9 percent)
[15:37:11] Called DecompressByteArray: compressed_data_size=582390 data_size=1304120, decompressed_data_size=1304120 diff=0
[15:37:11] - Digital signature verified
[15:37:11]
[15:37:11] Project: 8021 (Run 6, Clone 107, Gen 46)
[15:37:11]
[15:37:11] Assembly optimizations on if available.
[15:37:11] Entering M.D.
[15:37:17] Mapping NT from 1 to 1
[15:37:17] Completed 0 out of 250000 steps (0%)
[15:44:14] Completed 2500 out of 250000 steps (1%)
[15:50:44] Completed 5000 out of 250000 steps (2%)
[15:57:14] Completed 7500 out of 250000 steps (3%)
[16:03:43] Completed 10000 out of 250000 steps (4%)
[16:10:25] Completed 12500 out of 250000 steps (5%)
[16:16:58] Completed 15000 out of 250000 steps (6%)
[16:22:37] Completed 17500 out of 250000 steps (7%)
[16:28:59] Completed 20000 out of 250000 steps (8%)
[16:34:55] Completed 22500 out of 250000 steps (9%)
[16:41:26] Completed 25000 out of 250000 steps (10%)
[16:45:22] - Autosending finished units... [March 18 16:45:22 UTC]
[16:45:22] Trying to send all finished work units
[16:45:22] + No unsent completed units remaining.
[16:45:22] - Autosend completed
[16:45:22] + Working...
[16:47:26] Completed 27500 out of 250000 steps (11%)
[16:53:30] Completed 30000 out of 250000 steps (12%)
[17:00:02] Completed 32500 out of 250000 steps (13%)
[17:06:38] Completed 35000 out of 250000 steps (14%)
[17:13:33] Completed 37500 out of 250000 steps (15%)
[17:19:58] Completed 40000 out of 250000 steps (16%)
[17:26:37] Completed 42500 out of 250000 steps (17%)
[17:33:26] Completed 45000 out of 250000 steps (18%)
[17:39:55] Completed 47500 out of 250000 steps (19%)
[17:47:06] Completed 50000 out of 250000 steps (20%)
[17:53:27] Completed 52500 out of 250000 steps (21%)
[18:00:33] Completed 55000 out of 250000 steps (22%)
[18:07:04] Completed 57500 out of 250000 steps (23%)
[18:14:10] Completed 60000 out of 250000 steps (24%)
[18:21:16] Completed 62500 out of 250000 steps (25%)
[18:28:32] Completed 65000 out of 250000 steps (26%)
[18:35:29] Completed 67500 out of 250000 steps (27%)
[18:42:25] Completed 70000 out of 250000 steps (28%)
[18:49:39] Completed 72500 out of 250000 steps (29%)
[18:57:04] Completed 75000 out of 250000 steps (30%)
[19:04:25] Completed 77500 out of 250000 steps (31%)
[19:11:35] Completed 80000 out of 250000 steps (32%)
[19:18:33] Completed 82500 out of 250000 steps (33%)
[19:25:48] Completed 85000 out of 250000 steps (34%)
[19:32:55] Completed 87500 out of 250000 steps (35%)
[19:40:05] Completed 90000 out of 250000 steps (36%)
[19:46:45] Completed 92500 out of 250000 steps (37%)
[19:53:33] Completed 95000 out of 250000 steps (38%)
[20:01:03] Completed 97500 out of 250000 steps (39%)
[20:08:12] Completed 100000 out of 250000 steps (40%)
[20:15:35] Completed 102500 out of 250000 steps (41%)
[20:22:52] Completed 105000 out of 250000 steps (42%)
[20:30:10] Completed 107500 out of 250000 steps (43%)
[20:37:27] Completed 110000 out of 250000 steps (44%)
[20:43:52] Completed 112500 out of 250000 steps (45%)
[20:50:26] Completed 115000 out of 250000 steps (46%)
[20:56:53] Completed 117500 out of 250000 steps (47%)
[21:03:19] Completed 120000 out of 250000 steps (48%)
[21:09:49] Completed 122500 out of 250000 steps (49%)
[21:15:28] Completed 125000 out of 250000 steps (50%)
[21:21:58] Completed 127500 out of 250000 steps (51%)
[21:28:20] Completed 130000 out of 250000 steps (52%)
[21:34:54] Completed 132500 out of 250000 steps (53%)
[21:40:46] Completed 135000 out of 250000 steps (54%)
[21:47:01] Completed 137500 out of 250000 steps (55%)
[21:52:55] Completed 140000 out of 250000 steps (56%)
[21:58:51] Completed 142500 out of 250000 steps (57%)
[22:04:43] Completed 145000 out of 250000 steps (58%)
[22:11:04] Completed 147500 out of 250000 steps (59%)
[22:17:57] Completed 150000 out of 250000 steps (60%)
[22:24:22] Completed 152500 out of 250000 steps (61%)
[22:30:54] Completed 155000 out of 250000 steps (62%)
[22:36:31] Completed 157500 out of 250000 steps (63%)
[22:42:47] Completed 160000 out of 250000 steps (64%)
[22:45:21] - Autosending finished units... [March 18 22:45:21 UTC]
[22:45:21] Trying to send all finished work units
[22:45:21] + No unsent completed units remaining.
[22:45:21] - Autosend completed
[22:45:21] + Working...
[22:49:08] Completed 162500 out of 250000 steps (65%)
[22:55:33] Completed 165000 out of 250000 steps (66%)
[23:01:54] Completed 167500 out of 250000 steps (67%)
[23:08:16] Completed 170000 out of 250000 steps (68%)
[23:14:39] Completed 172500 out of 250000 steps (69%)
[23:21:02] Completed 175000 out of 250000 steps (70%)
[23:27:25] Completed 177500 out of 250000 steps (71%)
[23:34:21] Completed 180000 out of 250000 steps (72%)
[23:40:07] Completed 182500 out of 250000 steps (73%)
[23:46:11] Completed 185000 out of 250000 steps (74%)
[23:52:10] Completed 187500 out of 250000 steps (75%)
[23:57:49] Completed 190000 out of 250000 steps (76%)
[00:04:24] Completed 192500 out of 250000 steps (77%)
[00:11:16] Completed 195000 out of 250000 steps (78%)
[00:18:44] Completed 197500 out of 250000 steps (79%)
[00:25:35] Completed 200000 out of 250000 steps (80%)
[00:32:28] Completed 202500 out of 250000 steps (81%)
[00:38:50] Completed 205000 out of 250000 steps (82%)
[00:44:48] Completed 207500 out of 250000 steps (83%)
[00:51:10] Completed 210000 out of 250000 steps (84%)
[00:57:32] Completed 212500 out of 250000 steps (85%)
[01:03:58] Completed 215000 out of 250000 steps (86%)
[01:09:57] Completed 217500 out of 250000 steps (87%)
[01:16:28] Completed 220000 out of 250000 steps (88%)
[01:22:22] Completed 222500 out of 250000 steps (89%)
[01:28:52] Completed 225000 out of 250000 steps (90%)
[01:34:39] Completed 227500 out of 250000 steps (91%)
[01:40:21] Completed 230000 out of 250000 steps (92%)
[01:46:39] Completed 232500 out of 250000 steps (93%)
[01:52:23] Completed 235000 out of 250000 steps (94%)
[01:58:17] Completed 237500 out of 250000 steps (95%)
[02:04:46] Completed 240000 out of 250000 steps (96%)
[02:10:34] Completed 242500 out of 250000 steps (97%)
[02:16:17] Completed 245000 out of 250000 steps (98%)
[02:22:02] Completed 247500 out of 250000 steps (99%)
[02:27:41] Completed 250000 out of 250000 steps (100%)
[02:27:42] DynamicWrapper: Finished Work Unit: sleep=10000
[02:27:52]
[02:27:52] Finished Work Unit:
[02:27:52] - Reading up to 857832 from "work/wudata_03.trr": Read 857832
[02:27:52] trr file hash check passed.
[02:27:52] - Reading up to 513376 from "work/wudata_03.xtc": Read 513376
[02:27:52] xtc file hash check passed.
[02:27:52] edr file hash check passed.
[02:27:52] logfile size: 25828
[02:27:52] Leaving Run
[02:27:52] - Writing 1402440 bytes of core data to disk...
[02:27:54] Done: 1401928 -> 1337467 (compressed to 95.4 percent)
[02:27:54] ... Done.
[02:27:54] - Shutting down core
[02:27:54]
[02:27:54] Folding@home Core Shutdown: FINISHED_UNIT
[02:27:56] CoreStatus = 64 (100)
[02:27:56] Unit 3 finished with 90 percent of time to deadline remaining.
[02:27:56] Updated performance fraction: 0.895943
[02:27:56] Sending work to server
[02:27:56] Project: 8021 (Run 6, Clone 107, Gen 46)
[02:27:56] - Read packet limit of 540015616... Set to 524286976.
[02:27:56] + Attempting to send results [March 19 02:27:56 UTC]
[02:27:56] - Reading file work/wuresults_03.dat from core
[02:27:56] (Read 1337979 bytes from disk)
[02:27:56] Connecting to http://171.67.108.58:8080/
[02:28:17] Posted data.
[02:28:17] Initial: 0000; - Uploaded at ~62 kB/s
[02:28:17] - Averaged speed for that direction ~61 kB/s
[02:28:17] + Results successfully sent
[02:28:17] Thank you for your contribution to Folding@Home.
[02:28:17] + Number of Units Completed: 568
[02:28:21] Trying to send all finished work units
[02:28:21] + No unsent completed units remaining.
[02:28:21] - Preparing to get new work unit...
[02:28:21] + Attempting to get work packet
[02:28:21] - Will indicate memory of 2045 MB
[02:28:21] - Connecting to assignment server
[02:28:21] Connecting to http://assign.stanford.edu:8080/
[02:28:22] Posted data.
[02:28:22] Initial: 43AB; - Successful: assigned to (171.67.108.59).
[02:28:22] + News From Folding@Home: Welcome to Folding@Home
[02:28:22] Loaded queue successfully.
[02:28:22] Connecting to http://171.67.108.59:8080/
[02:28:23] Posted data.
[02:28:23] Initial: 0000; - Receiving payload (expected size: 881019)
[02:28:27] - Downloaded at ~215 kB/s
[02:28:27] - Averaged speed for that direction ~199 kB/s
[02:28:27] + Received work.
[02:28:27] Trying to send all finished work units
[02:28:27] + No unsent completed units remaining.
[02:28:27] + Closed connections
[02:28:27]
[02:28:27] + Processing work unit
[02:28:27] Core required: FahCore_a4.exe
[02:28:27] Core found.
[02:28:27] Working on queue slot 04 [March 19 02:28:27 UTC]
[02:28:27] + Working ...
[02:28:27] - Calling '.\FahCore_a4.exe -dir work/ -suffix 04 -checkpoint 6 -verbose -lifeline 5040 -version 623'
[02:28:28]
[02:28:28] *------------------------------*
[02:28:28] Folding@Home Gromacs GB Core
[02:28:28] Version 2.27 (Dec. 15, 2010)
[02:28:28]
[02:28:28] Preparing to commence simulation
[02:28:28] - Looking at optimizations...
[02:28:28] - Created dyn
[02:28:28] - Files status OK
[02:28:28] - Expanded 880507 -> 1982052 (decompressed 225.1 percent)
[02:28:28] Called DecompressByteArray: compressed_data_size=880507 data_size=1982052, decompressed_data_size=1982052 diff=0
[02:28:28] - Digital signature verified
[02:28:28]
[02:28:28] Project: 8022 (Run 5, Clone 459, Gen 23)
[02:28:28]
[02:28:28] Assembly optimizations on if available.
[02:28:28] Entering M.D.
[02:28:34] Mapping NT from 1 to 1
[02:28:35] Completed 0 out of 250000 steps (0%)
[02:38:55] Completed 2500 out of 250000 steps (1%)
[02:49:24] Completed 5000 out of 250000 steps (2%)
[02:58:44] Completed 7500 out of 250000 steps (3%)
[03:08:34] Completed 10000 out of 250000 steps (4%)
[03:17:53] Completed 12500 out of 250000 steps (5%)
[03:27:15] Completed 15000 out of 250000 steps (6%)
[03:37:03] Completed 17500 out of 250000 steps (7%)
[03:47:45] Completed 20000 out of 250000 steps (8%)
[03:57:47] Completed 22500 out of 250000 steps (9%)
[04:07:08] Completed 25000 out of 250000 steps (10%)
[04:16:54] Completed 27500 out of 250000 steps (11%)
[04:26:03] Completed 30000 out of 250000 steps (12%)
[04:35:20] Completed 32500 out of 250000 steps (13%)
[04:45:20] - Autosending finished units... [March 19 04:45:20 UTC]
[04:45:20] Trying to send all finished work units
[04:45:20] + No unsent completed units remaining.
[04:45:20] - Autosend completed
[04:45:20] + Working...
[04:45:27] Completed 35000 out of 250000 steps (14%)
[04:55:04] Completed 37500 out of 250000 steps (15%)
[05:04:59] Completed 40000 out of 250000 steps (16%)
[05:15:02] Completed 42500 out of 250000 steps (17%)
[05:24:57] Completed 45000 out of 250000 steps (18%)
[05:34:11] Completed 47500 out of 250000 steps (19%)
[05:44:37] Completed 50000 out of 250000 steps (20%)
[05:54:08] Completed 52500 out of 250000 steps (21%)
[06:04:11] Completed 55000 out of 250000 steps (22%)
[06:13:23] Completed 57500 out of 250000 steps (23%)
[06:23:02] Completed 60000 out of 250000 steps (24%)
[06:32:12] Completed 62500 out of 250000 steps (25%)
[06:41:40] Completed 65000 out of 250000 steps (26%)
[06:50:50] Completed 67500 out of 250000 steps (27%)
[07:00:47] Completed 70000 out of 250000 steps (28%)
[07:10:16] Completed 72500 out of 250000 steps (29%)
[07:19:27] Completed 75000 out of 250000 steps (30%)
[07:28:47] Completed 77500 out of 250000 steps (31%)
[07:37:55] Completed 80000 out of 250000 steps (32%)
[07:47:51] Completed 82500 out of 250000 steps (33%)
[07:57:01] Completed 85000 out of 250000 steps (34%)
[08:06:23] Completed 87500 out of 250000 steps (35%)
[08:15:35] Completed 90000 out of 250000 steps (36%)
[08:26:05] Completed 92500 out of 250000 steps (37%)
[08:36:18] Completed 95000 out of 250000 steps (38%)
[08:45:30] Completed 97500 out of 250000 steps (39%)
[08:55:05] Completed 100000 out of 250000 steps (40%)
[09:04:23] Completed 102500 out of 250000 steps (41%)
[09:14:09] Completed 105000 out of 250000 steps (42%)
[09:23:53] Completed 107500 out of 250000 steps (43%)
[09:33:51] Completed 110000 out of 250000 steps (44%)
[09:42:59] Completed 112500 out of 250000 steps (45%)
[09:52:32] Completed 115000 out of 250000 steps (46%)
[10:01:32] Completed 117500 out of 250000 steps (47%)
[10:11:05] Completed 120000 out of 250000 steps (48%)
[10:20:43] Completed 122500 out of 250000 steps (49%)
[10:30:15] Completed 125000 out of 250000 steps (50%)
[10:40:14] Completed 127500 out of 250000 steps (51%)
[10:45:19] - Autosending finished units... [March 19 10:45:19 UTC]
[10:45:19] Trying to send all finished work units
[10:45:19] + No unsent completed units remaining.
[10:45:19] - Autosend completed
[10:45:19] + Working...
[10:49:52] Completed 130000 out of 250000 steps (52%)
[10:58:52] Completed 132500 out of 250000 steps (53%)
[11:08:27] Completed 135000 out of 250000 steps (54%)
[11:17:30] Completed 137500 out of 250000 steps (55%)
[11:28:19] Completed 140000 out of 250000 steps (56%)
[11:37:53] Completed 142500 out of 250000 steps (57%)
[11:47:57] Completed 145000 out of 250000 steps (58%)
[11:57:26] Completed 147500 out of 250000 steps (59%)
[12:07:00] Completed 150000 out of 250000 steps (60%)
[12:17:05] Completed 152500 out of 250000 steps (61%)
[12:26:07] Completed 155000 out of 250000 steps (62%)
[12:36:12] Completed 157500 out of 250000 steps (63%)
[12:46:10] Completed 160000 out of 250000 steps (64%)
[12:55:43] Completed 162500 out of 250000 steps (65%)
[13:05:48] Completed 165000 out of 250000 steps (66%)
[13:15:40] Completed 167500 out of 250000 steps (67%)
[13:25:25] Completed 170000 out of 250000 steps (68%)
[13:35:30] Completed 172500 out of 250000 steps (69%)
[13:44:43] Completed 175000 out of 250000 steps (70%)
[13:54:54] Completed 177500 out of 250000 steps (71%)
[14:04:58] Completed 180000 out of 250000 steps (72%)
[14:14:30] Completed 182500 out of 250000 steps (73%)
[14:23:31] Completed 185000 out of 250000 steps (74%)
[14:34:21] Completed 187500 out of 250000 steps (75%)
[14:43:24] Completed 190000 out of 250000 steps (76%)
[14:53:23] Completed 192500 out of 250000 steps (77%)
[15:03:06] Completed 195000 out of 250000 steps (78%)
[15:13:47] Completed 197500 out of 250000 steps (79%)
[15:23:52] Completed 200000 out of 250000 steps (80%)
[15:35:16] Completed 202500 out of 250000 steps (81%)
[15:44:56] Completed 205000 out of 250000 steps (82%)
[15:54:51] Completed 207500 out of 250000 steps (83%)
[16:04:56] Completed 210000 out of 250000 steps (84%)
[16:14:34] Completed 212500 out of 250000 steps (85%)
[16:24:07] Completed 215000 out of 250000 steps (86%)
[16:34:04] Completed 217500 out of 250000 steps (87%)
[16:43:45] Completed 220000 out of 250000 steps (88%)
[16:45:17] - Autosending finished units... [March 19 16:45:17 UTC]
[16:45:17] Trying to send all finished work units
[16:45:17] + No unsent completed units remaining.
[16:45:17] - Autosend completed
[16:45:17] + Working...
[16:53:19] Completed 222500 out of 250000 steps (89%)
[17:03:02] Completed 225000 out of 250000 steps (90%)
[17:12:36] Completed 227500 out of 250000 steps (91%)
[17:22:00] Completed 230000 out of 250000 steps (92%)
[17:31:34] Completed 232500 out of 250000 steps (93%)
[17:41:00] Completed 235000 out of 250000 steps (94%)
[17:50:39] Completed 237500 out of 250000 steps (95%)
[18:00:26] Completed 240000 out of 250000 steps (96%)
[18:11:27] Completed 242500 out of 250000 steps (97%)
[18:22:18] Completed 245000 out of 250000 steps (98%)
[18:31:35] Completed 247500 out of 250000 steps (99%)
[18:42:12] Completed 250000 out of 250000 steps (100%)
[18:42:13] DynamicWrapper: Finished Work Unit: sleep=10000
[18:42:23]
[18:42:23] Finished Work Unit:
[18:42:23] - Reading up to 1298724 from "work/wudata_04.trr": Read 1298724
[18:42:23] trr file hash check passed.
[18:42:23] - Reading up to 776932 from "work/wudata_04.xtc": Read 776932
[18:42:23] xtc file hash check passed.
[18:42:23] edr file hash check passed.
[18:42:23] logfile size: 29119
[18:42:23] Leaving Run
[18:42:25] - Writing 2110179 bytes of core data to disk...
[18:42:25] Done: 2109667 -> 2016332 (compressed to 95.5 percent)
[18:42:25] ... Done.
[18:42:26] - Shutting down core
[18:42:26]
[18:42:26] Folding@home Core Shutdown: FINISHED_UNIT
[18:42:30] CoreStatus = 64 (100)
[18:42:30] Unit 4 finished with 90 percent of time to deadline remaining.
[18:42:30] Updated performance fraction: 0.897727
[18:42:30] Sending work to server
[18:42:30] Project: 8022 (Run 5, Clone 459, Gen 23)
[18:42:30] - Read packet limit of 540015616... Set to 524286976.
[18:42:30] + Attempting to send results [March 19 18:42:30 UTC]
[18:42:30] - Reading file work/wuresults_04.dat from core
[18:42:30] (Read 2016844 bytes from disk)
[18:42:30] Connecting to http://171.67.108.59:8080/
[18:43:00] Posted data.
[18:43:00] Initial: 0000; - Uploaded at ~65 kB/s
[18:43:00] - Averaged speed for that direction ~62 kB/s
[18:43:00] + Results successfully sent
[18:43:00] Thank you for your contribution to Folding@Home.
My system specs: (http://foldingforum.org/memberlist.php? ... le&u=16896).
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Is it possible to change the Slot Type from Uniprocessor to Uni or CPU and change the heading to just Type? It would free up some space for adding more columns etc. Not a big deal but would help with organizing the interface.
Also, is it possible to have the PPD and Credit figures right justified. Again, not a big deal but it would help with readability.
I find that counting pauses as failed to be counter-productive. In the past when I saw a failure I knew I had some checking and maybe some reporting to do but now I don't.
One final thing I've noticed has to do with Toggle Completed Count Style. In one view it shows the current counts since last start up. When toggled it shows the total count for v6 clients but zero for v7 clients.
Also, is it possible to have the PPD and Credit figures right justified. Again, not a big deal but it would help with readability.
I find that counting pauses as failed to be counter-productive. In the past when I saw a failure I knew I had some checking and maybe some reporting to do but now I don't.
One final thing I've noticed has to do with Toggle Completed Count Style. In one view it shows the current counts since last start up. When toggled it shows the total count for v6 clients but zero for v7 clients.
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Switched the other V7 machine from SMP to 8 UNI clients and updated HFM to 0.9.0 for testing. Everything seems normal and HFM updates correctly.
I wonder if the speed of the slot is an issue. The 8 UNI is averaging 00:28:17 TPF while the first machine's UNI clients are 02:40:00 TPF and 02:38:00 TPF.
The four GPU slots are running sub-minute TPFs.
I have another folder running mixed GPU/UNI that I can test this on, but it will be @2 weeks before it completes current work.
I wonder if the speed of the slot is an issue. The 8 UNI is averaging 00:28:17 TPF while the first machine's UNI clients are 02:40:00 TPF and 02:38:00 TPF.
The four GPU slots are running sub-minute TPFs.
I have another folder running mixed GPU/UNI that I can test this on, but it will be @2 weeks before it completes current work.
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
I don;t understand how to set up remote monitoring on V7 with the new HFM. Can someone help me with an example?
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Similar newbie issue here; I've set up a remote client in HFM and it clearly has a connection, since it correctly shows the slot type, Core, Core ID and Project, but it's all zeros in the TPF, PPD and ETA(these items are all visible and updating in FAHControl locally on that remote device). It did finally update in FHM and show the % progress correctly.
The local client is listed and updating properly.
FAHcontrol is properly showing the remote device with all the info properly displayed/updated.
Hmm.... guess I was just impatient or something. After about 10-15 minutes, the info came up.
The local client is listed and updating properly.
FAHcontrol is properly showing the remote device with all the info properly displayed/updated.
Hmm.... guess I was just impatient or something. After about 10-15 minutes, the info came up.
-
- Posts: 136
- Joined: Fri Mar 07, 2008 7:29 pm
- Hardware configuration: C2D E6400 2.13 GHz @ 3.2 GHz
Asus EN8800GTS 640 (G80) @ 660/792/1700 running the 6.23 w/ core11 v1.19
forceware 260.89
Asus P5N-E SLi
2GB 800MHz DDRII (2xCorsair TwinX 512MB)
WinXP 32 SP3 - Location: Prague
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
I'm not sure what is going on, maybe I'm doing something wrong, but yesterday I started using HFM again after a few months hiatus from folding and I noticed that last WU in the WU history list in HFM is from 21.3.2011 (even though I stopped folding in december that year).
This would indicate that with one of the previous versions of HFM it stopped adding WUs into that list. Yesterday I installed the new version (0.9.0) and completed units still aren't being recorded there. I also tried clean install (uninstalled HFM and deleted it's folder in %appdata%) and the list stayed empty even after completing some more WUs.
by the way, thank you harlam for this great program, it is an amazing monitoring tool
This would indicate that with one of the previous versions of HFM it stopped adding WUs into that list. Yesterday I installed the new version (0.9.0) and completed units still aren't being recorded there. I also tried clean install (uninstalled HFM and deleted it's folder in %appdata%) and the list stayed empty even after completing some more WUs.
by the way, thank you harlam for this great program, it is an amazing monitoring tool
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
I like Slot Type. I think it will stay... with the client/core version information on with SMP and GPU slots it lines up rather nicely. I think the use of 'Uniprocessor' as a client type was there in v0.6.2. Can't say I remember for sure. I haven't run a Uniprocessor client in a long time. I considered using Uni or CPU for the same reason you're suggesting but this doesn't jive with what the slots are called in the v7 client. To make things clear between what someone sees in v7 and HFM I decided to leave the name spelled out.bollix47 wrote:Is it possible to change the Slot Type from Uniprocessor to Uni or CPU and change the heading to just Type? It would free up some space for adding more columns etc. Not a big deal but would help with organizing the interface.
I'll tried this and in one regard I like it and in another I don't. It is easier to see which clients have higher PPD and Credit. However, it's impossible to get any space between the right side of a right-justified column and the left side of a left justified column. This I really don't like. Not dismissing this idea. It has merit but if this is going to happen it is going to be user configurable.bollix47 wrote:Also, is it possible to have the PPD and Credit figures right justified. Again, not a big deal but it would help with readability.
I've entered an issue on this based on yours and previous comments: http://code.google.com/p/hfm-net/issues/detail?id=271bollix47 wrote:I find that counting pauses as failed to be counter-productive. In the past when I saw a failure I knew I had some checking and maybe some reporting to do but now I don't.
Couple options here. Remove the Total Completed Display all together so we don't get 0 values for v7. Second, pull this number from the WU History for all clients (v6 & v7) in lieu of parsing it from the logs for v6 clients only. I imagine everyone would like the latter but everyone please feel free to share you opinion.bollix47 wrote:One final thing I've noticed has to do with Toggle Completed Count Style. In one view it shows the current counts since last start up. When toggled it shows the total count for v6 clients but zero for v7 clients.
Issue is here: http://code.google.com/p/hfm-net/issues/detail?id=272
HFM is bound to the log file. It needs the entire thing, specifically the end, to get an accurate reading. There is a speed issue transferring this data and I'm looking into it and will attempt to address it in the next update. Once things sync up, however, updates should be instant since log updates are small in comparison to the entire log file.j3pflynn wrote:Hmm.... guess I was just impatient or something. After about 10-15 minutes, the info came up.
Hi ^w^ing! If there are errors writing completed WUs to the WU History Database these will be logged in the HFM.log file. When a WU is set to be written to the database you should see something like this in the Messages Window (F7):^w^ing wrote:I'm not sure what is going on, maybe I'm doing something wrong, but yesterday I started using HFM again after a few months hiatus from folding and I noticed that last WU in the WU history list in HFM is from 21.3.2011 (even though I stopped folding in december that year).
This would indicate that with one of the previous versions of HFM it stopped adding WUs into that list. Yesterday I installed the new version (0.9.0) and completed units still aren't being recorded there. I also tried clean install (uninstalled HFM and deleted it's folder in %appdata%) and the list stayed empty even after completing some more WUs.
by the way, thank you harlam for this great program, it is an amazing monitoring tool
If an error occurs executing the write it will be logged after that line. Thanks very much for your kind words ^w^ing. Let's see if we can get this figured out and I'll feel a bit better. If you send me your HFM.log file (Help Menu) I'll gladly take a look at it. You can find me (harlam357) at gmail.[3/21/2012-9:12:39 PM] - (Ubuntu VM SMP - Main Workstation) Writing unit to database: P6980 (R0, C80, G33)
-
- Posts: 136
- Joined: Fri Mar 07, 2008 7:29 pm
- Hardware configuration: C2D E6400 2.13 GHz @ 3.2 GHz
Asus EN8800GTS 640 (G80) @ 660/792/1700 running the 6.23 w/ core11 v1.19
forceware 260.89
Asus P5N-E SLi
2GB 800MHz DDRII (2xCorsair TwinX 512MB)
WinXP 32 SP3 - Location: Prague
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
oh right, there's a log file, I didn't realize. Whenever a WU is finished, it throws an exception and the system message reads "input string has wrong format":
Code: Select all
[28.3.2012-5:19:42] - (wing-pc Slot 00) Slot Status: Paused
[28.3.2012-5:19:42] - (wing-pc Slot 01) Slot Status: Paused
[28.3.2012-5:19:42] - (wing-pc Slot 02) Writing unit to database: P7000 (R3, C67, G65)
[28.3.2012-5:19:42] X Vstupní řetězec nemá správný formát.
[28.3.2012-5:19:42] X System.FormatException: Vstupní řetězec nemá správný formát.
v System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
v System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
v System.Double.Parse(String s, NumberStyles style, NumberFormatInfo info)
v System.String.System.IConvertible.ToDouble(IFormatProvider provider)
v System.Convert.ToDouble(Object value, IFormatProvider provider)
v System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param)
v System.Data.SQLite.SQLiteStatement.BindParameters()
v System.Data.SQLite.SQLiteCommand.BuildNextCommand()
v System.Data.SQLite.SQLiteDataReader.NextResult()
v System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave)
v System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior)
v System.Data.SQLite.SQLiteCommand.ExecuteNonQuery()
v HFM.Core.UnitInfoDatabase.WriteUnitInfoToDatabase(SQLiteConnection con, UnitInfoLogic unitInfoLogic)
v HFM.Core.UnitInfoDatabase.WriteUnitInfo(UnitInfoLogic unitInfoLogic)
v HFM.Core.Client.UpdateUnitInfoDatabase(UnitInfoLogic unitInfoLogic)
[28.3.2012-5:19:42] - (wing-pc Slot 02) Slot Status: RunningNoFrameTimes
[28.3.2012-5:19:42] - (wing-pc) Retrieval finished in 35 ms
[28.3.2012-5:20:12] - (wing-pc Slot 00) Slot Status: Paused
[28.3.2012-5:20:12] - (wing-pc Slot 01) Slot Status: Paused
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
Yep... that will do it. What language settings are you using with Windows? Is that Russian or Czech? I only test with en-US (English United States) settings, so things like this can easily slip by. This is something I can and will fix. Just need the proper language settings to reproduce it.
-
- Posts: 136
- Joined: Fri Mar 07, 2008 7:29 pm
- Hardware configuration: C2D E6400 2.13 GHz @ 3.2 GHz
Asus EN8800GTS 640 (G80) @ 660/792/1700 running the 6.23 w/ core11 v1.19
forceware 260.89
Asus P5N-E SLi
2GB 800MHz DDRII (2xCorsair TwinX 512MB)
WinXP 32 SP3 - Location: Prague
Re: HFM.NET - Monitoring Application for Folding@Home v6/v7
It's Czech (cs). And yes, our letters have eyebrows, we regret nothing I sent you a little something for your trouble, have a beer on me