Problem with 171.67.108.54?

Moderators: Site Moderators, FAHC Science Team

Post Reply
zodac
Posts: 55
Joined: Wed Mar 03, 2010 11:17 pm

Problem with 171.67.108.54?

Post by zodac »

Many people with AMD 5/6 series GPUs on my team have been doing 511pt WUs for the past few days, after consistently going 1,835pt WUs for weeks.

The server status page shows the server as fine, but the "WUs Avail/WUs To Go/WUs Wait" columns are all blank. Is it just a shortage, or something else?
Image
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Problem with 171.67.108.54?

Post by 7im »

Projects come and go, and the next project may not bench out to the same total points, especially when the WUs are different sizes. Unless the server is down, there is nothing wrong, just natural progression of the project, or simply a hiatus while they crunch some results, and then release more WUs in the project, if needed.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
zodac
Posts: 55
Joined: Wed Mar 03, 2010 11:17 pm

Re: Problem with 171.67.108.54?

Post by zodac »

Yeah, but all the WUs they're getting now are 511pt WUs, which are Core11. There are only two Core16 servers on the psummary page; one is only accepting, and the other is the one I'm talking about.
Image
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Problem with 171.67.108.54?

Post by 7im »

Just like bigadv work units for SMP clients, there are not always work units available for all types of cores.

As always, fold what you get. ;)
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
zodac
Posts: 55
Joined: Wed Mar 03, 2010 11:17 pm

Re: Problem with 171.67.108.54?

Post by zodac »

You're not really answering the question. I'm not complaining about the WUs and saying there should be other ones.

I'm asking if there's a reason there are very few Core16 WUs compared to the past few weeks.
Image
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Problem with 171.67.108.54?

Post by 7im »

And you're not really getting the answer.

Yes, there is always a reason. WU volumes fluctuate up and down naturally as one project ends, and another one starts. Or while they are doing maintenance on a server. Etc. Asking for a specific reason is like asking why the wind blows harder today than it did yesterday. ;)

If you must have the exact reason why the wind is blowing less today, then I suggest sending a PM a researcher doing fahcore_16 projects. Please share if you get an answer. 8-)
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
zodac
Posts: 55
Joined: Wed Mar 03, 2010 11:17 pm

Re: Problem with 171.67.108.54?

Post by zodac »

Aye, but usually when there are WU fluctuations, there are other similar WUs available (not including -bigadv shortages). Since this is the only server which is listed as active, I figured this was the place to actually ask about it.
Image
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Problem with 171.67.108.54?

Post by 7im »

WU availability fluctuations aren't really considered a server problem, but this is still the best place to ask. Although a researcher may not respond to a normal occurance, hence the PM suggestion. ;)
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Post Reply