130.237.232.141 (P6900 unable to upload)

aob · Post by **aob** » Sat Jun 11, 2011 1:47 am

03:52:46] Project: 6900 (Run 54, Clone 11, Gen 1)
[03:52:46] 
[03:52:46] Assembly optimizations on if available.
[03:52:46] Entering M.D.
[03:52:52] Mapping NT from 8 to 8 
[03:52:55] Completed 0 out of 250000 steps  (0%)
[04:34:30] Completed 2500 out of 250000 steps  (1%)
[05:14:26] Completed 5000 out of 250000 steps  (2%)
[05:54:50] Completed 7500 out of 250000 steps  (3%)
[06:34:06] Completed 10000 out of 250000 steps  (4%)
[07:12:51] Completed 12500 out of 250000 steps  (5%)
[07:54:28] Completed 15000 out of 250000 steps  (6%)
[08:33:13] Completed 17500 out of 250000 steps  (7%)
[09:12:02] Completed 20000 out of 250000 steps  (8%)
[09:31:39] - Autosending finished units... [June 8 09:31:39 UTC]
[09:31:39] Trying to send all finished work units
[09:31:39] + No unsent completed units remaining.
[09:31:39] - Autosend completed
[09:50:47] Completed 22500 out of 250000 steps  (9%)
[10:29:33] Completed 25000 out of 250000 steps  (10%)
[11:08:21] Completed 27500 out of 250000 steps  (11%)
[11:47:08] Completed 30000 out of 250000 steps  (12%)
[12:26:25] Completed 32500 out of 250000 steps  (13%)
[13:05:14] Completed 35000 out of 250000 steps  (14%)
[13:44:01] Completed 37500 out of 250000 steps  (15%)
[14:22:48] Completed 40000 out of 250000 steps  (16%)
[15:01:35] Completed 42500 out of 250000 steps  (17%)
[15:31:39] - Autosending finished units... [June 8 15:31:39 UTC]
[15:31:39] Trying to send all finished work units
[15:31:39] + No unsent completed units remaining.
[15:31:39] - Autosend completed
[15:40:20] Completed 45000 out of 250000 steps  (18%)
[16:19:04] Completed 47500 out of 250000 steps  (19%)
[16:57:55] Completed 50000 out of 250000 steps  (20%)
[17:36:41] Completed 52500 out of 250000 steps  (21%)
[18:15:31] Completed 55000 out of 250000 steps  (22%)
[18:54:22] Completed 57500 out of 250000 steps  (23%)
[19:33:10] Completed 60000 out of 250000 steps  (24%)
[20:12:01] Completed 62500 out of 250000 steps  (25%)
[20:52:43] Completed 65000 out of 250000 steps  (26%)
[21:31:39] - Autosending finished units... [June 8 21:31:39 UTC]
[21:31:39] Trying to send all finished work units
[21:31:39] + No unsent completed units remaining.
[21:31:39] - Autosend completed
[21:33:14] Completed 67500 out of 250000 steps  (27%)
[22:14:11] Completed 70000 out of 250000 steps  (28%)
[22:52:58] Completed 72500 out of 250000 steps  (29%)
[23:32:17] Completed 75000 out of 250000 steps  (30%)
[00:12:11] Completed 77500 out of 250000 steps  (31%)
[00:52:42] Completed 80000 out of 250000 steps  (32%)
[01:31:40] Completed 82500 out of 250000 steps  (33%)
[02:10:34] Completed 85000 out of 250000 steps  (34%)
[02:49:55] Completed 87500 out of 250000 steps  (35%)
[03:30:05] Completed 90000 out of 250000 steps  (36%)
[03:31:39] - Autosending finished units... [June 9 03:31:39 UTC]
[03:31:39] Trying to send all finished work units
[03:31:39] + No unsent completed units remaining.
[03:31:39] - Autosend completed
[04:08:57] Completed 92500 out of 250000 steps  (37%)
[04:48:25] Completed 95000 out of 250000 steps  (38%)
[05:28:55] Completed 97500 out of 250000 steps  (39%)
[06:09:19] Completed 100000 out of 250000 steps  (40%)
[06:48:26] Completed 102500 out of 250000 steps  (41%)
[07:27:16] Completed 105000 out of 250000 steps  (42%)
[08:06:04] Completed 107500 out of 250000 steps  (43%)
[08:44:55] Completed 110000 out of 250000 steps  (44%)
[09:23:46] Completed 112500 out of 250000 steps  (45%)
[09:31:39] - Autosending finished units... [June 9 09:31:39 UTC]
[09:31:39] Trying to send all finished work units
[09:31:39] + No unsent completed units remaining.
[09:31:39] - Autosend completed
[10:02:33] Completed 115000 out of 250000 steps  (46%)
[10:41:25] Completed 117500 out of 250000 steps  (47%)
[11:20:12] Completed 120000 out of 250000 steps  (48%)
[11:59:03] Completed 122500 out of 250000 steps  (49%)
[12:37:54] Completed 125000 out of 250000 steps  (50%)
[13:17:10] Completed 127500 out of 250000 steps  (51%)
[13:56:04] Completed 130000 out of 250000 steps  (52%)
[14:34:52] Completed 132500 out of 250000 steps  (53%)
[15:13:43] Completed 135000 out of 250000 steps  (54%)
[15:31:39] - Autosending finished units... [June 9 15:31:39 UTC]
[15:31:39] Trying to send all finished work units
[15:31:39] + No unsent completed units remaining.
[15:31:39] - Autosend completed
[15:52:30] Completed 137500 out of 250000 steps  (55%)
[16:31:23] Completed 140000 out of 250000 steps  (56%)
[17:10:13] Completed 142500 out of 250000 steps  (57%)
[17:49:02] Completed 145000 out of 250000 steps  (58%)
[18:27:55] Completed 147500 out of 250000 steps  (59%)
[19:06:46] Completed 150000 out of 250000 steps  (60%)
[19:45:39] Completed 152500 out of 250000 steps  (61%)
[20:24:28] Completed 155000 out of 250000 steps  (62%)
[21:03:17] Completed 157500 out of 250000 steps  (63%)
[21:31:39] - Autosending finished units... [June 9 21:31:39 UTC]
[21:31:39] Trying to send all finished work units
[21:31:39] + No unsent completed units remaining.
[21:31:39] - Autosend completed
[21:42:36] Completed 160000 out of 250000 steps  (64%)
[22:22:18] Completed 162500 out of 250000 steps  (65%)
[23:03:05] Completed 165000 out of 250000 steps  (66%)
[23:42:04] Completed 167500 out of 250000 steps  (67%)
[00:20:55] Completed 170000 out of 250000 steps  (68%)
[01:00:00] Completed 172500 out of 250000 steps  (69%)
[01:38:50] Completed 175000 out of 250000 steps  (70%)
[02:17:56] Completed 177500 out of 250000 steps  (71%)
[02:58:32] Completed 180000 out of 250000 steps  (72%)
[03:31:39] - Autosending finished units... [June 10 03:31:39 UTC]
[03:31:39] Trying to send all finished work units
[03:31:39] + No unsent completed units remaining.
[03:31:39] - Autosend completed
[03:38:42] Completed 182500 out of 250000 steps  (73%)
[04:19:20] Completed 185000 out of 250000 steps  (74%)
[04:59:30] Completed 187500 out of 250000 steps  (75%)
[05:41:53] Completed 190000 out of 250000 steps  (76%)
[06:20:55] Completed 192500 out of 250000 steps  (77%)
[06:59:48] Completed 195000 out of 250000 steps  (78%)
[07:38:38] Completed 197500 out of 250000 steps  (79%)
[08:17:29] Completed 200000 out of 250000 steps  (80%)
[08:56:19] Completed 202500 out of 250000 steps  (81%)
[09:31:39] - Autosending finished units... [June 10 09:31:39 UTC]
[09:31:39] Trying to send all finished work units
[09:31:39] + No unsent completed units remaining.
[09:31:39] - Autosend completed
[09:35:10] Completed 205000 out of 250000 steps  (82%)
[10:14:06] Completed 207500 out of 250000 steps  (83%)
[10:52:54] Completed 210000 out of 250000 steps  (84%)
[11:31:47] Completed 212500 out of 250000 steps  (85%)
[12:10:41] Completed 215000 out of 250000 steps  (86%)
[12:49:31] Completed 217500 out of 250000 steps  (87%)
[13:28:24] Completed 220000 out of 250000 steps  (88%)
[14:07:16] Completed 222500 out of 250000 steps  (89%)
[14:46:09] Completed 225000 out of 250000 steps  (90%)
[15:27:09] Completed 227500 out of 250000 steps  (91%)
[15:31:39] - Autosending finished units... [June 10 15:31:39 UTC]
[15:31:39] Trying to send all finished work units
[15:31:39] + No unsent completed units remaining.
[15:31:39] - Autosend completed
[16:06:46] Completed 230000 out of 250000 steps  (92%)
[16:45:52] Completed 232500 out of 250000 steps  (93%)
[17:24:56] Completed 235000 out of 250000 steps  (94%)
[18:03:57] Completed 237500 out of 250000 steps  (95%)
[18:43:01] Completed 240000 out of 250000 steps  (96%)
[19:22:03] Completed 242500 out of 250000 steps  (97%)
[20:01:06] Completed 245000 out of 250000 steps  (98%)
[20:41:14] Completed 247500 out of 250000 steps  (99%)
[21:22:41] Completed 250000 out of 250000 steps  (100%)
[21:22:54] DynamicWrapper: Finished Work Unit: sleep=10000
[21:23:04] 
[21:23:04] Finished Work Unit:
[21:23:04] - Reading up to 52713120 from "work/wudata_07.trr": Read 52713120
[21:23:04] trr file hash check passed.
[21:23:04] - Reading up to 47142952 from "work/wudata_07.xtc": Read 47142952
[21:23:05] xtc file hash check passed.
[21:23:05] edr file hash check passed.
[21:23:05] logfile size: 205035
[21:23:05] Leaving Run
[21:23:09] - Writing 100229047 bytes of core data to disk...
[21:23:11]   ... Done.
[21:23:29] - Shutting down core
[21:23:29] 
[21:23:29] Folding@home Core Shutdown: FINISHED_UNIT
[21:23:39] CoreStatus = 64 (100)
[21:23:39] Unit 7 finished with 55 percent of time to deadline remaining.
[21:23:39] Updated performance fraction: 0.499727
[21:23:39] Sending work to server
[21:23:39] Project: 6900 (Run 54, Clone 11, Gen 1)


[21:23:39] + Attempting to send results [June 10 21:23:39 UTC]
[21:23:39] - Reading file work/wuresults_07.dat from core
[21:23:39]   (Read 100229047 bytes from disk)
[21:23:39] Connecting to http://130.237.232.141:8080/
[21:31:39] - Autosending finished units... [June 10 21:31:39 UTC]
[21:31:39] Trying to send all finished work units
[21:31:39] - Already sending work
[21:31:39] + Sent 0 of 1 completed units to the server
[21:31:39] - Autosend completed
[22:01:29] Killing all core threads
[22:01:29] Killing 4 cores
[22:01:29] Killing core 0
[22:01:29] Killing core 1
[22:01:29] Killing core 2
[22:01:29] Killing core 3

I don't know if this is a server issue or what but the unit finished fine according to the log and then just got hung. I have been trying to force it to send after I noticed this, but all I get is "Connecting to http://130.237.232.141:8080/". I'm thinking this has something to do with the Autosender running while the unit was trying to upload but I don't know that. I have never had this problem before. Any ideas?

tjmagneto · Post by **tjmagneto** » Sat Jun 11, 2011 2:32 am

Just completed a P6900 and am unable to upload a 6900 to the same server.

GreyWhiskers · Post by **GreyWhiskers** » Sat Jun 11, 2011 2:55 am

I just did a detailed look at the server status. While the Status/Connect is "full/Accepting", at 13:50 PDT, the server stopped accepting uploads (WUs RCV column), and froze the WU Avail at 329.

Did something go wrong with new WU injection into the WU Available reservoir?

EDIT: just saw the update at 1905 PDT - the WU Avail, WU to Go, WU Wait values all went to zero.

EDIT2: Fri Jun 10 22:00:10 PDT 2011. Server status still same - WU Avail, WU to Go, WU Wait values all zero; Status/Connect still "full/Accepting",

Code: Select all

                         SERVER IP     clieNAME   STAT   CONNECT   WUs AVAIL   WUs to goWUs WAIT   WUs RCV
Fri Jun 10 12:05:10 PDT 2130.237.232.14SMP foldingfull   Accepting          330      330        330         6
Fri Jun 10 12:40:10 PDT 2130.237.232.14SMP foldingfull   Accepting          330      330        330         1
Fri Jun 10 13:15:10 PDT 2130.237.232.14SMP foldingfull   Accepting          328      328        328        13
Fri Jun 10 13:50:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 14:25:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 15:00:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 15:35:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 16:10:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 16:45:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 17:20:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 17:55:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0
Fri Jun 10 18:30:10 PDT 2130.237.232.14SMP foldingfull   Accepting          329      329        329         0

John_Weatherman · Post by **John_Weatherman** » Sat Jun 11, 2011 3:56 am

Kasson posted on May 31, that they would uppgrade the server software (see viewtopic.php?f=24&t=14714&start=75#p187606) Could be something to do with that.

KMac · Post by **KMac** » Sat Jun 11, 2011 5:45 am

I am experiencing the same issue, even after restarting the client.

Code: Select all

[05:01:07] Completed 0 out of 250000 steps  (0%)
[05:26:56] - Couldn't send HTTP request to server
[05:26:56] + Could not connect to Work Server (results)
[05:26:56]     (130.237.232.141:8080)
[05:26:56] + Retrying using alternative port
[05:26:56] Connecting to http://130.237.232.141:80/
[05:26:58] - Couldn't send HTTP request to server
[05:26:58] + Could not connect to Work Server (results)
[05:26:58]     (130.237.232.141:80)
[05:26:58] - Error: Could not transmit unit 01 (completed June 11) to work server.
[05:26:58] - 1 failed uploads of this unit.
[05:26:58]   Keeping unit 01 in queue.
[05:26:58] + Sent 0 of 1 completed units to the server
[05:26:58] - Autosend completed
[05:28:04] Completed 2500 out of 250000 steps  (1%)

DrSpalding · Post by **DrSpalding** » Sat Jun 11, 2011 5:48 am

Hi, nothing weird happened with the machine; it just picked up a new WU, worked it continuously, and tried to send it off. The error message was "Server reports problem with unit". I also got no points, obviously.

Code: Select all

Note: Please read the license agreement (FAH-634.exe -license). Further
use of this software requires that you have read and accepted this agreement.

12 cores detected
'mpiexec' is not recognized as an internal or external command,
operable program or batch file.


--- Opening Log file [May 16 02:00:24 UTC]


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.34

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\fah\smp
Executable: C:\FAH\SMP\FAH-634.exe
Arguments: -smp -bigadv

[02:00:24] - Ask before connecting: No
[02:00:24] - User name: DrSpalding (Team 48083)
[02:00:24] - User ID: 60DDBAE11FB3894D
[02:00:24] - Machine ID: 2
[02:00:24]
[02:00:24] Loaded queue successfully.
[02:00:24]
[02:00:24] + Processing work unit
[02:00:24] Core required: FahCore_a5.exe
[02:00:24] Core found.
[02:00:24] Working on queue slot 02 [May 16 02:00:24 UTC]
[02:00:24] + Working ...

---

[04:28:19] - Preparing to get new work unit...
[04:28:19] Cleaning up work directory
[04:28:29] + Attempting to get work packet
[04:28:29] Passkey found
[04:28:29] - Connecting to assignment server
[04:28:31] - Successful: assigned to (130.237.232.141).
[04:28:31] + News From Folding@Home: Welcome to Folding@Home
[04:28:31] Loaded queue successfully.
[04:35:32] + Closed connections
[04:35:32]
[04:35:32] + Processing work unit
[04:35:32] Core required: FahCore_a5.exe
[04:35:32] Core found.
[04:35:32] Working on queue slot 06 [June 9 04:35:32 UTC]
[04:35:32] + Working ...
[04:35:32]
[04:35:32] *------------------------------*
[04:35:32] Folding@Home Gromacs SMP Core
[04:35:32] Version 2.27 (Mar 12, 2010)
[04:35:32]
[04:35:32] Preparing to commence simulation
[04:35:32] - Looking at optimizations...
[04:35:32] - Created dyn
[04:35:32] - Files status OK
[04:35:37] - Expanded 24870975 -> 30796292 (decompressed 123.8 percent)
[04:35:37] Called DecompressByteArray: compressed_data_size=24870975 data_size=30796292, decompressed_data_size=30796292 diff=0
[04:35:37] - Digital signature verified
[04:35:37]
[04:35:37] Project: 6900 (Run 12, Clone 1, Gen 3)
[04:35:37]
[04:35:37] Assembly optimizations on if available.
[04:35:37] Entering M.D.
[04:35:44] Mapping NT from 12 to 12
[04:35:46] Completed 0 out of 250000 steps  (0%)
[04:59:25] Completed 2500 out of 250000 steps  (1%)
[05:23:05] Completed 5000 out of 250000 steps  (2%)
[05:46:41] Completed 7500 out of 250000 steps  (3%)
[06:10:23] Completed 10000 out of 250000 steps  (4%)
[06:33:59] Completed 12500 out of 250000 steps  (5%)
[06:57:38] Completed 15000 out of 250000 steps  (6%)
[07:21:43] Completed 17500 out of 250000 steps  (7%)
[07:46:08] Completed 20000 out of 250000 steps  (8%)
[08:11:54] Completed 22500 out of 250000 steps  (9%)
[08:35:31] Completed 25000 out of 250000 steps  (10%)
[08:59:14] Completed 27500 out of 250000 steps  (11%)
[09:22:54] Completed 30000 out of 250000 steps  (12%)
[09:46:30] Completed 32500 out of 250000 steps  (13%)
[10:10:12] Completed 35000 out of 250000 steps  (14%)
[10:33:49] Completed 37500 out of 250000 steps  (15%)
[10:57:27] Completed 40000 out of 250000 steps  (16%)
[11:21:09] Completed 42500 out of 250000 steps  (17%)
[11:44:46] Completed 45000 out of 250000 steps  (18%)
[12:08:26] Completed 47500 out of 250000 steps  (19%)
[12:32:06] Completed 50000 out of 250000 steps  (20%)
[12:55:44] Completed 52500 out of 250000 steps  (21%)
[13:19:39] Completed 55000 out of 250000 steps  (22%)
[13:44:26] Completed 57500 out of 250000 steps  (23%)
[14:09:10] Completed 60000 out of 250000 steps  (24%)
[14:34:03] Completed 62500 out of 250000 steps  (25%)
[14:59:09] Completed 65000 out of 250000 steps  (26%)
[15:23:38] Completed 67500 out of 250000 steps  (27%)
[15:48:06] Completed 70000 out of 250000 steps  (28%)
[16:12:31] Completed 72500 out of 250000 steps  (29%)
[16:37:08] Completed 75000 out of 250000 steps  (30%)
[17:01:29] Completed 77500 out of 250000 steps  (31%)
[17:25:43] Completed 80000 out of 250000 steps  (32%)
[17:49:55] Completed 82500 out of 250000 steps  (33%)
[18:14:20] Completed 85000 out of 250000 steps  (34%)
[18:39:15] Completed 87500 out of 250000 steps  (35%)
[19:03:55] Completed 90000 out of 250000 steps  (36%)
[19:28:13] Completed 92500 out of 250000 steps  (37%)
[19:52:53] Completed 95000 out of 250000 steps  (38%)
[20:17:22] Completed 97500 out of 250000 steps  (39%)
[20:41:39] Completed 100000 out of 250000 steps  (40%)
[21:06:23] Completed 102500 out of 250000 steps  (41%)
[21:31:18] Completed 105000 out of 250000 steps  (42%)
[21:55:47] Completed 107500 out of 250000 steps  (43%)
[22:20:00] Completed 110000 out of 250000 steps  (44%)
[22:43:49] Completed 112500 out of 250000 steps  (45%)
[23:07:35] Completed 115000 out of 250000 steps  (46%)
[23:31:18] Completed 117500 out of 250000 steps  (47%)
[23:55:23] Completed 120000 out of 250000 steps  (48%)
[00:20:26] Completed 122500 out of 250000 steps  (49%)
[00:45:09] Completed 125000 out of 250000 steps  (50%)
[01:10:47] Completed 127500 out of 250000 steps  (51%)
[01:35:02] Completed 130000 out of 250000 steps  (52%)
[01:59:14] Completed 132500 out of 250000 steps  (53%)
[02:23:10] Completed 135000 out of 250000 steps  (54%)
[02:46:53] Completed 137500 out of 250000 steps  (55%)
[03:10:39] Completed 140000 out of 250000 steps  (56%)
[03:34:22] Completed 142500 out of 250000 steps  (57%)
[03:58:08] Completed 145000 out of 250000 steps  (58%)
[04:22:52] Completed 147500 out of 250000 steps  (59%)
[04:46:37] Completed 150000 out of 250000 steps  (60%)
[05:10:36] Completed 152500 out of 250000 steps  (61%)
[05:34:21] Completed 155000 out of 250000 steps  (62%)
[05:58:07] Completed 157500 out of 250000 steps  (63%)
[06:21:52] Completed 160000 out of 250000 steps  (64%)
[06:45:36] Completed 162500 out of 250000 steps  (65%)
[07:09:44] Completed 165000 out of 250000 steps  (66%)
[07:33:54] Completed 167500 out of 250000 steps  (67%)
[07:59:02] Completed 170000 out of 250000 steps  (68%)
[08:22:56] Completed 172500 out of 250000 steps  (69%)
[08:46:40] Completed 175000 out of 250000 steps  (70%)
[09:10:27] Completed 177500 out of 250000 steps  (71%)
[09:34:13] Completed 180000 out of 250000 steps  (72%)
[09:57:58] Completed 182500 out of 250000 steps  (73%)
[10:21:45] Completed 185000 out of 250000 steps  (74%)
[10:45:28] Completed 187500 out of 250000 steps  (75%)
[11:09:13] Completed 190000 out of 250000 steps  (76%)
[11:32:55] Completed 192500 out of 250000 steps  (77%)
[11:56:43] Completed 195000 out of 250000 steps  (78%)
[12:20:25] Completed 197500 out of 250000 steps  (79%)
[12:44:11] Completed 200000 out of 250000 steps  (80%)
[13:07:55] Completed 202500 out of 250000 steps  (81%)
[13:31:58] Completed 205000 out of 250000 steps  (82%)
[13:56:41] Completed 207500 out of 250000 steps  (83%)
[14:23:46] Completed 210000 out of 250000 steps  (84%)
[14:49:40] Completed 212500 out of 250000 steps  (85%)
[15:14:42] Completed 215000 out of 250000 steps  (86%)
[15:39:42] Completed 217500 out of 250000 steps  (87%)
[16:04:25] Completed 220000 out of 250000 steps  (88%)
[16:29:21] Completed 222500 out of 250000 steps  (89%)
[16:54:25] Completed 225000 out of 250000 steps  (90%)
[17:19:57] Completed 227500 out of 250000 steps  (91%)
[17:45:07] Completed 230000 out of 250000 steps  (92%)
[18:11:33] Completed 232500 out of 250000 steps  (93%)
[18:36:38] Completed 235000 out of 250000 steps  (94%)
[19:02:23] Completed 237500 out of 250000 steps  (95%)
[19:28:43] Completed 240000 out of 250000 steps  (96%)
[19:54:46] Completed 242500 out of 250000 steps  (97%)
[20:20:53] Completed 245000 out of 250000 steps  (98%)
[20:47:27] Completed 247500 out of 250000 steps  (99%)
[21:14:31] Completed 250000 out of 250000 steps  (100%)
[21:14:46] DynamicWrapper: Finished Work Unit: sleep=10000
[21:14:56]
[21:14:56] Finished Work Unit:
[21:14:56] - Reading up to 52713120 from "work/wudata_06.trr": Read 52713120
[21:14:56] trr file hash check passed.
[21:14:56] - Reading up to 47029576 from "work/wudata_06.xtc": Read 47029576
[21:14:57] xtc file hash check passed.
[21:14:57] edr file hash check passed.
[21:14:57] logfile size: 199025
[21:14:57] Leaving Run
[21:14:57] - Writing 100109661 bytes of core data to disk...
[21:14:59]   ... Done.
[21:15:37] - Shutting down core
[21:15:37]
[21:15:37] Folding@home Core Shutdown: FINISHED_UNIT
[21:15:45] CoreStatus = 64 (100)
[21:15:45] Sending work to server
[21:15:45] Project: 6900 (Run 12, Clone 1, Gen 3)


[21:15:45] + Attempting to send results [June 10 21:15:45 UTC]
[21:22:29] - Server reports problem with unit.
[21:22:29] - Preparing to get new work unit...
[21:22:29] Cleaning up work directory

I have been having issues with the userid of some of my computers getting mangled by the servers (if you look at the stats page, it says I have 14 clients in the last 50 days. I have had 9. And no, I don't believe it is someone else using my username--been through this before with bruce). Nothing changed on the machine from the download of the WU to its finishing up. The client started on 16 May and has been running since that time w/o interruption. The wuresults_XX.dat file for that unit is still on the machine. Here is the queue entry for the WU noted above:

Code: Select all

 Index 6: finished 8955.00 pts (220.185 pt/hr, 5269.08 ppd) 3.54 X min speed
   bonus pts: 86452.56 (2119.513 pt/hr, 50868.30 ppd); bonus factor: 9.65; kfactor: 26.40
   server: 130.237.232.141:8080; project: 6900
   Folding: run 12, clone 1, generation 3; benchmark 0; misc: 500, 200, 12 (be)
   issue: Wed Jun 08 21:28:25 2011; begin: Wed Jun 08 21:35:32 2011
   end: Fri Jun 10 14:15:45 2011; due: Tue Jun 14 21:35:32 2011 (6 days)
   preferred: Sun Jun 12 21:35:32 2011 (4 days)
   core URL: http://www.stanford.edu/~pande/Win32/x86/Core_a5.fah (V2.27)
   core number: 0xa5; core name: GRO-A5
   CPU: 1,687 Pentium II/III; OS: 1,0 Windows
   smp cores: 12; cores to use: 12
   flops: 1060591773 (1060.591773 megaflops)
   memory: 8192 MB
   client type: 7 BigAdv
   assignment info (be): Wed Jun 08 21:27:08 2011; 9777A76E
   CS: 130.237.165.141; P limit: 524286976
   user: DrSpalding; team: 48083; ID: 4F89B31FE1BADD60; mach ID: 2
   work/wudata_06.dat file size: 24871487; WU type: Folding@home

I see a few other reports like this too, so I have to wonder is something along the lines of a corrupted userid in transit, either from user to server or between servers at Stanford is causing some sort of issue.

Grandpa_01 · Post by **Grandpa_01** » Sat Jun 11, 2011 6:19 am

When did you download the WU that server has been down for a while . It was put into accept only on the May 31 and has not been showing any WU's available for quite a while.

tjmagneto · Post by **tjmagneto** » Sat Jun 11, 2011 6:32 am

Here's a smattering of my log which indicates I downloaded the WU on 6-9-11.

Code: Select all

[14:35:11] - Autosend completed
[14:35:11] - Will indicate memory of 6135 MB
[14:35:11] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 12, Stepping: 2
[14:35:11] - Connecting to assignment server
[14:35:11] Connecting to http://assign.stanford.edu:8080/
[14:35:11] Posted data.
[14:35:11] Initial: ED82; - Successful: assigned to (130.237.232.141).
[14:35:11] + News From Folding@Home: Welcome to Folding@Home
[14:35:11] Loaded queue successfully.
[14:35:11] Sent data
[14:35:11] Connecting to http://130.237.232.141:8080/
[14:35:17] Posted data.
[14:35:17] Initial: 0000; - Receiving payload (expected size: 24870709)
[14:38:14] - Downloaded at ~137 kB/s
[14:38:14] - Averaged speed for that direction ~137 kB/s
[14:38:14] + Received work.
[14:38:14] + Closed connections
[14:38:14] 
[14:38:14] + Processing work unit
[14:38:14] Core required: FahCore_a5.exe
[14:38:14] Core found.
[14:38:14] Working on queue slot 01 [June 9 14:38:14 UTC]
[14:38:14] + Working ...
[14:38:14] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 01 -np 12 -checkpoint 15 -verbose -lifeline 3376 -version 634'

[14:38:14] 
[14:38:14] *------------------------------*
[14:38:14] Folding@Home Gromacs SMP Core
[14:38:14] Version 2.27 (Mar 12, 2010)
[14:38:14] 
[14:38:14] Preparing to commence simulation
[14:38:14] - Looking at optimizations...
[14:38:14] - Created dyn
[14:38:14] - Files status OK
[14:38:17] - Expanded 24870197 -> 30796292 (decompressed 123.8 percent)
[14:38:17] Called DecompressByteArray: compressed_data_size=24870197 data_size=30796292, decompressed_data_size=30796292 diff=0
[14:38:18] - Digital signature verified
[14:38:18] 
[14:38:18] Project: 6900 (Run 32, Clone 3, Gen 2)
[14:38:18] 
[14:38:18] Assembly optimizations on if available.
[14:38:18] Entering M.D.
[14:38:24] Mapping NT from 12 to 12 
[14:38:26] Completed 0 out of 250000 steps  (0%)
[14:58:54] Completed 2500 out of 250000 steps  (1%)
[15:19:43] Completed 5000 out of 250000 steps  (2%)
[15:43:13] Completed 7500 out of 250000 steps  (3%)
[16:06:13] Completed 10000 out of 250000 steps  (4%)

Grandpa_01 · Post by **Grandpa_01** » Sat Jun 11, 2011 6:37 am

That is strange if you check the server status that server says it has 0 WU's Avail 0 Wu's to go and 0 Wu's Waiting. It appears there may be a problem.

KMac · Post by **KMac** » Sat Jun 11, 2011 7:15 am

Mine was downloaded 6/9/2011 as well.

Code: Select all

[06:03:57] - Autosending finished units... [June 9 06:03:57 UTC]
[06:03:57] + Processing work unit
[06:03:57] Trying to send all finished work units
[06:03:57] Core required: FahCore_a5.exe
[06:03:57] + No unsent completed units remaining.
[06:03:57] - Autosend completed
[06:03:57] Core found.
[06:03:57] Working on queue slot 01 [June 9 06:03:57 UTC]
[06:03:57] + Working ...
[06:03:57] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 01 -np 12 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 6736 -version 634'

[06:03:57] 
[06:03:57] *------------------------------*
[06:03:57] Folding@Home Gromacs SMP Core
[06:03:57] Version 2.27 (Mar 12, 2010)
[06:03:57] 
[06:03:57] Preparing to commence simulation
[06:03:57] - Ensuring status. Please wait.
[06:04:06] - Assembly optimizations manually forced on.
[06:04:06] - Not checking prior termination.
[06:04:10] - Expanded 20065742 -> 30796292 (decompressed 153.4 percent)
[06:04:10] Called DecompressByteArray: compressed_data_size=20065742 data_size=30796292, decompressed_data_size=30796292 diff=0
[06:04:10] - Digital signature verified
[06:04:10] 
[06:04:10] Project: 6900 (Run 28, Clone 3, Gen 0)
[06:04:10] 
[06:04:11] Assembly optimizations on if available.
[06:04:11] Entering M.D.
[06:04:17] Using Gromacs checkpoints
[06:04:17] Mapping NT from 12 to 12 
[06:04:22] Resuming from checkpoint
[06:04:23] Verified work/wudata_01.log
[06:04:23] Verified work/wudata_01.trr
[06:04:23] Verified work/wudata_01.xtc
[06:04:23] Verified work/wudata_01.edr
[06:04:24] Completed 1485 out of 250000 steps  (0%)
[06:14:31] Completed 2500 out of 250000 steps  (1%)
[06:39:51] Completed 5000 out of 250000 steps  (2%)
[07:05:56] Completed 7500 out of 250000 steps  (3%)
[07:31:11] Completed 10000 out of 250000 steps  (4%)

Grandpa_01 · Post by **Grandpa_01** » Sat Jun 11, 2011 7:31 am

It appears there might be a problem with the server 130.237.232.141 there are a couple of other post about that server and not being able to upload to it. If you look at the server stats it says it has 0 WU's available 0 WU's to go and 0 WU's waiting. That is the server Kasson said they were putting in accept only mode back on May 31 and then they were going to take it down to do repairs. They have not announced that it is back up yet.viewtopic.php?f=18&t=17275&start=60#p188611

Grandpa_01 · Post by **Grandpa_01** » Sat Jun 11, 2011 7:38 am

I think it is a server issue.
viewtopic.php?f=19&t=18863
viewtopic.php?f=18&t=17275&start=60#p188616

Leonardo · Post by **Leonardo** » Sat Jun 11, 2011 8:13 am

I had the same thing happen today as well:

Code: Select all

[20:14:05] Project: 6900 (Run 38, Clone 2, Gen 2)...
...[04:20:39] Completed 245000 out of 250000 steps  (98%)
[05:01:27] Completed 247500 out of 250000 steps  (99%)
[05:42:14] Completed 250000 out of 250000 steps  (100%)
[05:42:26] DynamicWrapper: Finished Work Unit: sleep=10000
[05:42:36] Finished Work Unit:
[05:42:36] - Reading up to 52713120 from "work/wudata_01.trr": Read 52713120
[05:42:36] trr file hash check passed.
[05:42:36] - Reading up to 47066312 from "work/wudata_01.xtc": Read 47066312
[05:42:36] xtc file hash check passed.
[05:42:36] edr file hash check passed.
[05:42:36] logfile size: 198140
[05:42:36] Leaving Run
[05:42:38] - Writing 100145512 bytes of core data to disk...
[05:42:39]   ... Done.
[05:42:46] - Shutting down core
[05:42:46] 
[05:42:46] Folding@home Core Shutdown: FINISHED_UNIT
[05:42:49] CoreStatus = 64 (100)
[05:42:49] Unit 1 finished with 52 percent of time to deadline remaining.
[05:42:49] Updated performance fraction: 0.596539
[05:42:49] Sending work to server
[05:42:49] Project: 6900 (Run 38, Clone 2, Gen 2)


[05:42:49] + Attempting to send results [June 11 05:42:49 UTC]
[05:42:49] - Reading file work/wuresults_01.dat from core
[05:42:49]   (Read 100145512 bytes from disk)
[05:42:49] Connecting to http://130.237.232.141:8080/

Nothing appeared to happen after that, nothing. The CPU and client were idle for an hour, at which point, I shut down the client and restarted it. It then downloaded a new work unit.

Work unit: 6900, run 38, clone 2 , Gen 2

Leonardo · Post by **Leonardo** » Sat Jun 11, 2011 8:20 am

Same problem, see here: http://foldingforum.org/viewtopic.php?f=19&t=18861

oatey4519 · Post by **oatey4519** » Sat Jun 11, 2011 8:25 am

Same problem...
Not been able to upload since midnight UK time.
Had to restart.

Code: Select all

21:25:48] Assembly optimizations on if available.
[21:25:48] Entering M.D.
[21:25:54] Using Gromacs checkpoints
[21:25:55] Mapping NT from 7 to 7 
[21:26:02] Resuming from checkpoint
[21:26:02] Verified work/wudata_01.log
[21:26:03] Verified work/wudata_01.trr
[21:26:03] Verified work/wudata_01.xtc
[21:26:03] Verified work/wudata_01.edr
[21:26:05] Completed 242075 out of 250000 steps (96%)
[21:32:51] Completed 242500 out of 250000 steps (97%)
[22:10:11] Completed 245000 out of 250000 steps (98%)
[22:47:31] Completed 247500 out of 250000 steps (99%)
[23:24:46] Completed 250000 out of 250000 steps (100%)
[23:24:58] DynamicWrapper: Finished Work Unit: sleep=10000
[23:25:08] 
[23:25:08] Finished Work Unit:
[23:25:08] - Reading up to 52713120 from "work/wudata_01.trr": Read 52713120
[23:25:09] trr file hash check passed.
[23:25:09] - Reading up to 46990016 from "work/wudata_01.xtc": Read 46990016
[23:25:09] xtc file hash check passed.
[23:25:09] edr file hash check passed.
[23:25:09] logfile size: 279086
[23:25:09] Leaving Run
[23:25:13] - Writing 100150162 bytes of core data to disk...
[23:25:15] ... Done.
[23:25:30] - Shutting down core
[23:25:30] 
[23:25:30] Folding@home Core Shutdown: FINISHED_UNIT
[23:25:36] CoreStatus = 64 (100)
[23:25:36] Unit 1 finished with 45 percent of time to deadline remaining.
[23:25:36] Updated performance fraction: 0.450602
[23:25:36] Sending work to server
[23:25:36] Project: 6900 (Run 29, Clone 14, Gen 1)


[23:25:36] + Attempting to send results [June 10 23:25:36 UTC]
[23:25:36] - Reading file work/wuresults_01.dat from core
[23:25:36] (Read 100150162 bytes from disk)
[23:25:36] Connecting to http://130.237.232.141:8080/
[02:27:05] - Couldn't send HTTP request to server
[02:27:05] + Could not connect to Work Server (results)
[02:27:05] (130.237.232.141:8080)
[02:27:05] + Retrying using alternative port
[02:27:05] Connecting to http://130.237.232.141:80/
[02:27:06] - Couldn't send HTTP request to server
[02:27:06] + Could not connect to Work Server (results)
[02:27:06] (130.237.232.141:80)
[02:27:06] - Error: Could not transmit unit 01 (completed June 10) to work server.
[02:27:06] - 1 failed uploads of this unit.
[02:27:06] Keeping unit 01 in queue.
[02:27:06] Trying to send all finished work units
[02:27:06] Project: 6900 (Run 29, Clone 14, Gen 1)


[02:27:06] + Attempting to send results [June 11 02:27:06 UTC]
[02:27:06] - Reading file work/wuresults_01.dat from core
[02:27:06] (Read 100150162 bytes from disk)
[02:27:06] Connecting to http://130.237.232.141:8080/
[02:27:07] - Couldn't send HTTP request to server
[02:27:07] + Could not connect to Work Server (results)
[02:27:07] (130.237.232.141:8080)
[02:27:07] + Retrying using alternative port
[02:27:07] Connecting to http://130.237.232.141:80/
[02:27:14] - Couldn't send HTTP request to server
[02:27:14] + Could not connect to Work Server (results)
[02:27:14] (130.237.232.141:80)
[02:27:14] - Error: Could not transmit unit 01 (completed June 10) to work server.
[02:27:14] - 2 failed uploads of this unit.


[02:27:14] + Attempting to send results [June 11 02:27:14 UTC]
[02:27:14] - Reading file work/wuresults_01.dat from core
[02:27:14] (Read 100150162 bytes from disk)
[02:27:14] Connecting to http://130.237.165.141:8080/
[02:27:14] - Couldn't send HTTP request to server
[02:27:14] + Could not connect to Work Server (results)
[02:27:14] (130.237.165.141:8080)
[02:27:14] + Retrying using alternative port
[02:27:14] Connecting to http://130.237.165.141:80/
[02:27:14] - Couldn't send HTTP request to server
[02:27:14] + Could not connect to Work Server (results)
[02:27:14] (130.237.165.141:80)
[02:27:14] Could not transmit unit 01 to Collection server; keeping in queue.
[02:27:14] + Sent 0 of 1 completed units to the server
[02:27:44] Trying to send all finished work units
[02:27:44] Project: 6900 (Run 29, Clone 14, Gen 1)


[02:27:44] + Attempting to send results [June 11 02:27:44 UTC]
[02:27:44] - Reading file work/wuresults_01.dat from core
[02:27:44] (Read 100150162 bytes from disk)
[02:27:44] Connecting to http://130.237.232.141:8080/
[02:27:46] - Couldn't send HTTP request to server
[02:27:46] + Could not connect to Work Server (results)
[02:27:46] (130.237.232.141:8080)
[02:27:46] + Retrying using alternative port
[02:27:46] Connecting to http://130.237.232.141:80/
[03:25:32] - Autosending finished units... [June 11 03:25:32 UTC]
[03:25:32] Trying to send all finished work units
[03:25:32] - Already sending work
[03:25:32] + Sent 0 of 1 completed units to the server
[03:25:32] - Autosend completed
[05:27:11] - Couldn't send HTTP request to server
[05:27:11] + Could not connect to Work Server (results)
[05:27:11] (130.237.232.141:80)
[05:27:11] - Error: Could not transmit unit 01 (completed June 10) to work server.
[05:27:11] - 3 failed uploads of this unit.


[05:27:11] + Attempting to send results [June 11 05:27:11 UTC]
[05:27:11] - Reading file work/wuresults_01.dat from core
[05:27:11] (Read 100150162 bytes from disk)
[05:27:11] Connecting to http://130.237.165.141:8080/
[05:27:11] - Couldn't send HTTP request to server
[05:27:11] + Could not connect to Work Server (results)
[05:27:11] (130.237.165.141:8080)
[05:27:11] + Retrying using alternative port
[05:27:11] Connecting to http://130.237.165.141:80/
[05:27:12] - Couldn't send HTTP request to server
[05:27:12] + Could not connect to Work Server (results)
[05:27:12] (130.237.165.141:80)
[05:27:12] Could not transmit unit 01 to Collection server; keeping in queue.
[05:27:12] + Sent 0 of 1 completed units to the server
[05:27:42] Trying to send all finished work units
[05:27:42] Project: 6900 (Run 29, Clone 14, Gen 1)


[05:27:42] + Attempting to send results [June 11 05:27:42 UTC]
[05:27:42] - Reading file work/wuresults_01.dat from core
[05:27:42] (Read 100150162 bytes from disk)
[05:27:42] Connecting to http://130.237.232.141:8080/
[05:27:43] - Couldn't send HTTP request to server
[05:27:43] + Could not connect to Work Server (results)
[05:27:43] (130.237.232.141:8080)
[05:27:43] + Retrying using alternative port
[05:27:43] Connecting to http://130.237.232.141:80/
[05:27:44] - Couldn't send HTTP request to server
[05:27:44] + Could not connect to Work Server (results)
[05:27:44] (130.237.232.141:80)
[05:27:44] - Error: Could not transmit unit 01 (completed June 10) to work server.
[05:27:44] - 4 failed uploads of this unit.


[05:27:44] + Attempting to send results [June 11 05:27:44 UTC]
[05:27:44] - Reading file work/wuresults_01.dat from core
[05:27:44] (Read 100150162 bytes from disk)
[05:27:44] Connecting to http://130.237.165.141:8080/
[05:27:44] - Couldn't send HTTP request to server
[05:27:44] + Could not connect to Work Server (results)
[05:27:44] (130.237.165.141:8080)
[05:27:44] + Retrying using alternative port
[05:27:44] Connecting to http://130.237.165.141:80/
[05:27:44] - Couldn't send HTTP request to server
[05:27:44] + Could not connect to Work Server (results)
[05:27:44] (130.237.165.141:80)
[05:27:44] Could not transmit unit 01 to Collection server; keeping in queue.
[05:27:44] + Sent 0 of 1 completed units to the server
[05:28:14] Trying to send all finished work units
[05:28:14] Project: 6900 (Run 29, Clone 14, Gen 1)


[05:28:14] + Attempting to send results [June 11 05:28:14 UTC]
[05:28:14] - Reading file work/wuresults_01.dat from core
[05:28:14] (Read 100150162 bytes from disk)
[05:28:14] Connecting to http://130.237.232.141:8080/
[05:40:48] Killing all core threads
[05:40:48] Could not get process id information. Please kill core process manually

Folding@Home Client Shutdown at user request.
[05:40:48] ***** Got a SIGTERM signal (2)
[05:40:48] Killing all core threads
[05:40:48] Could not get process id information. Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [June 11 06:22:06 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

Folding@Home Client Version 6.34

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: F:\Folding\SMP
Executable: F:\Folding\FAH.exe
Arguments: -oneunit -forceasm -smp 7 -bigadv -verbosity 9 

[06:22:06] - Ask before connecting: No
[06:22:06] - User name: OT6889 (Team 111065)
[06:22:06] - User ID: 4B58909571ADA0AB
[06:22:06] - Machine ID: 2
[06:22:06] 
[06:22:07] Loaded queue successfully.
[06:22:07] - Preparing to get new work unit...
[06:22:07] - Autosending finished units... [June 11 06:22:07 UTC]
[06:22:07] Cleaning up work directory
[06:22:07] Trying to send all finished work units
[06:22:07] + Attempting to get work packet
[06:22:07] Project: 6900 (Run 29, Clone 14, Gen 1)
[06:22:07] Passkey found


[06:22:07] + Attempting to send results [June 11 06:22:07 UTC]
[06:22:07] - Reading file work/wuresults_01.dat from core
[06:22:07] - Will indicate memory of 6135 MB
[06:22:07] (Read 100150162 bytes from disk)
[06:22:07] - Detect CPU.[06:22:07] Connecting to http://130.237.232.141:8080/
Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[06:22:07] - Connecting to assignment server
[06:22:07] Connecting to http://assign.stanford.edu:8080/
[06:22:08] Posted data.
[06:22:08] Initial: 8F80; - Successful: assigned to (128.143.199.96).
[06:22:08] + News From Folding@Home: Welcome to Folding@Home
[06:22:08] Loaded queue successfully.
[06:22:08] Sent data
[06:22:08] Connecting to http://128.143.199.96:8080/
[06:22:13] Posted data.
[06:22:13] Initial: 0000; - Receiving payload (expected size: 1775601)
[06:22:46] - Downloaded at ~52 kB/s
[06:22:46] - Averaged speed for that direction ~665 kB/s
[06:22:46] + Received work.
[06:22:46] + Closed connections
[06:22:46] 
[06:22:46] + Processing work unit
[06:22:46] Core required: FahCore_a3.exe
[06:22:46] Core not found.
[06:22:46] - Core is not present or corrupted.
[06:22:46] - Attempting to download new core...
[06:22:46] + Downloading new core: FahCore_a3.exe
[06:22:46] Downloading core (/~pande/Win32/x86/Core_a3.fah from www.stanford.edu)
[06:22:47] Initial: AFDE; + 10240 bytes downloaded
[06:22:48] Initial: 0E39; + 20480 bytes downloaded
[06:22:48] Initial: FD05; + 30720 bytes downloaded
[06:22:49] Initial: 3169; + 40960 bytes downloaded
[06:22:49] Initial: C7C8; + 51200 bytes downloaded
[06:22:49] Initial: E16F; + 61440 bytes downloaded
[06:22:49] Initial: 8EA9; + 71680 bytes downloaded
[06:22:49] Initial: 8FB9; + 81920 bytes downloaded
[06:22:50] Initial: 5E60; + 92160 bytes downloaded
[06:22:50] Initial: 8473; + 102400 bytes downloaded
[06:22:50] Initial: A3B5; + 112640 bytes downloaded
[06:22:50] Initial: 367E; + 122880 bytes downloaded
[06:22:50] Initial: D002; + 133120 bytes downloaded
[06:22:51] Initial: 2639; + 143360 bytes downloaded
[06:22:51] Initial: 90D0; + 153600 bytes downloaded
[06:22:51] Initial: 0A62; + 163840 bytes downloaded
[06:22:51] Initial: E68C; + 174080 bytes downloaded
[06:22:51] Initial: 815E; + 184320 bytes downloaded
[06:22:51] Initial: 5173; + 194560 bytes downloaded
[06:22:52] Initial: 21C1; + 204800 bytes downloaded
[06:22:52] Initial: 11FB; + 215040 bytes downloaded
[06:22:52] Initial: CF13; + 225280 bytes downloaded
[06:22:53] Initial: 8B3F; + 235520 bytes downloaded
[06:22:53] Initial: 5947; + 245760 bytes downloaded
[06:22:53] Initial: B552; + 256000 bytes downloaded
[06:22:53] Initial: 8A01; + 266240 bytes downloaded
[06:22:53] Initial: 6BC7; + 276480 bytes downloaded
[06:22:54] Initial: 0510; + 286720 bytes downloaded
[06:22:54] Initial: 8DC0; + 296960 bytes downloaded
[06:22:54] Initial: 9DD4; + 307200 bytes downloaded
[06:22:54] Initial: 709B; + 317440 bytes downloaded
[06:22:55] Initial: 9EA5; + 327680 bytes downloaded
[06:22:55] Initial: 5132; + 337920 bytes downloaded
[06:22:55] Initial: 2499; + 348160 bytes downloaded
[06:22:55] Initial: 003A; + 358400 bytes downloaded
[06:22:55] Initial: 1440; + 368640 bytes downloaded
[06:22:56] Initial: 78A5; + 378880 bytes downloaded
[06:22:56] Initial: F89C; + 389120 bytes downloaded
[06:22:56] Initial: 9CC8; + 399360 bytes downloaded
[06:22:56] Initial: 92DF; + 409600 bytes downloaded
[06:22:57] Initial: A690; + 419840 bytes downloaded
[06:22:57] Initial: 67E5; + 430080 bytes downloaded
[06:22:57] Initial: B274; + 440320 bytes downloaded
[06:22:57] Initial: DC44; + 450560 bytes downloaded
[06:22:58] Initial: 650F; + 460800 bytes downloaded
[06:22:58] Initial: 45F8; + 471040 bytes downloaded
[06:22:58] Initial: 45B2; + 481280 bytes downloaded
[06:22:58] Initial: 94E2; + 491520 bytes downloaded
[06:22:58] Initial: 2283; + 501760 bytes downloaded
[06:22:59] Initial: 65A7; + 512000 bytes downloaded
[06:22:59] Initial: 6486; + 522240 bytes downloaded
[06:22:59] Initial: BD5F; + 532480 bytes downloaded
[06:23:00] Initial: 7EDC; + 542720 bytes downloaded
[06:23:00] Initial: 190C; + 552960 bytes downloaded
[06:23:00] Initial: B535; + 563200 bytes downloaded
[06:23:00] Initial: ED7E; + 573440 bytes downloaded
[06:23:01] Initial: A0BB; + 583680 bytes downloaded
[06:23:01] Initial: C898; + 593920 bytes downloaded
[06:23:01] Initial: 955D; + 604160 bytes downloaded
[06:23:02] Initial: A17E; + 614400 bytes downloaded
[06:23:02] Initial: A89D; + 624640 bytes downloaded
[06:23:02] Initial: 8B70; + 634880 bytes downloaded
[06:23:03] Initial: 514F; + 645120 bytes downloaded
[06:23:03] Initial: FAC9; + 655360 bytes downloaded
[06:23:03] Initial: 4820; + 665600 bytes downloaded
[06:23:03] Initial: 3A9C; + 675840 bytes downloaded
[06:23:04] Initial: 4DB1; + 686080 bytes downloaded
[06:23:04] Initial: D738; + 696320 bytes downloaded
[06:23:04] Initial: E2B6; + 706560 bytes downloaded
[06:23:04] Initial: CF9F; + 716800 bytes downloaded
[06:23:05] Initial: 151B; + 727040 bytes downloaded
[06:23:05] Initial: 4A6B; + 737280 bytes downloaded
[06:23:05] Initial: 2F85; + 747520 bytes downloaded
[06:23:06] Initial: 9C64; + 757760 bytes downloaded
[06:23:06] Initial: 182E; + 768000 bytes downloaded
[06:23:06] Initial: 3EBA; + 778240 bytes downloaded
[06:23:07] Initial: 3D14; + 788480 bytes downloaded
[06:23:07] Initial: CB45; + 798720 bytes downloaded
[06:23:07] Initial: 0C8B; + 808960 bytes downloaded
[06:23:08] Initial: 7921; + 819200 bytes downloaded
[06:23:08] Initial: F7FA; + 829440 bytes downloaded
[06:23:08] Initial: 64D9; + 839680 bytes downloaded
[06:23:08] Initial: 18B5; + 849920 bytes downloaded
[06:23:09] Initial: 5B16; + 860160 bytes downloaded
[06:23:09] Initial: 7647; + 870400 bytes downloaded
[06:23:09] Initial: 98B0; + 880640 bytes downloaded
[06:23:09] Initial: C821; + 890880 bytes downloaded
[06:23:10] Initial: 5300; + 901120 bytes downloaded
[06:23:10] Initial: FEAB; + 911360 bytes downloaded
[06:23:10] Initial: 2E28; + 921600 bytes downloaded
[06:23:11] Initial: 295A; + 931840 bytes downloaded
[06:23:11] Initial: EEB9; + 942080 bytes downloaded
[06:23:11] Initial: B808; + 952320 bytes downloaded
[06:23:12] Initial: A79A; + 962560 bytes downloaded
[06:23:12] Initial: 295F; + 972800 bytes downloaded
[06:23:12] Initial: 3AB8; + 983040 bytes downloaded
[06:23:13] Initial: 8888; + 993280 bytes downloaded
[06:23:13] Initial: D263; + 1003520 bytes downloaded
[06:23:13] Initial: 78B3; + 1013760 bytes downloaded
[06:23:14] Initial: 79E2; + 1024000 bytes downloaded
[06:23:14] Initial: 671B; + 1034240 bytes downloaded
[06:23:14] Initial: F609; + 1044480 bytes downloaded
[06:23:15] Initial: 0B7F; + 1054720 bytes downloaded
[06:23:15] Initial: 173A; + 1064960 bytes downloaded
[06:23:15] Initial: 0C05; + 1075200 bytes downloaded
[06:23:16] Initial: 3E02; + 1085440 bytes downloaded
[06:23:16] Initial: 91DD; + 1095680 bytes downloaded
[06:23:17] Initial: 1319; + 1105920 bytes downloaded
[06:23:17] Initial: 7947; + 1116160 bytes downloaded
[06:23:17] Initial: 9B7E; + 1126400 bytes downloaded
[06:23:18] Initial: 213C; + 1136640 bytes downloaded
[06:23:18] Initial: 74B9; + 1146880 bytes downloaded
[06:23:18] Initial: 9C3C; + 1157120 bytes downloaded
[06:23:19] Initial: CEF5; + 1167360 bytes downloaded
[06:23:19] Initial: 86D5; + 1177600 bytes downloaded
[06:23:19] Initial: B618; + 1187840 bytes downloaded
[06:23:19] Initial: 6E65; + 1198080 bytes downloaded
[06:23:20] Initial: C6D9; + 1208320 bytes downloaded
[06:23:20] Initial: 8ACC; + 1218560 bytes downloaded
[06:23:21] Initial: 5072; + 1228800 bytes downloaded
[06:23:21] Initial: 4711; + 1239040 bytes downloaded
[06:23:21] Initial: 9573; + 1249280 bytes downloaded
[06:23:22] Initial: ED89; + 1259520 bytes downloaded
[06:23:22] Initial: 7F28; + 1269760 bytes downloaded
[06:23:22] Initial: E58B; + 1280000 bytes downloaded
[06:23:23] Initial: C898; + 1290240 bytes downloaded
[06:23:23] Initial: 8C03; + 1300480 bytes downloaded
[06:23:23] Initial: 03A9; + 1310720 bytes downloaded
[06:23:24] Initial: A825; + 1320960 bytes downloaded
[06:23:24] Initial: 2D06; + 1331200 bytes downloaded
[06:23:25] Initial: 677F; + 1341440 bytes downloaded
[06:23:25] Initial: 071A; + 1351680 bytes downloaded
[06:23:25] Initial: 1EE5; + 1361920 bytes downloaded
[06:23:26] Initial: 7144; + 1372160 bytes downloaded
[06:23:26] Initial: 951D; + 1382400 bytes downloaded
[06:23:27] Initial: 6D55; + 1392640 bytes downloaded
[06:23:27] Initial: AB6F; + 1402880 bytes downloaded
[06:23:27] Initial: 93D0; + 1413120 bytes downloaded
[06:23:28] Initial: 2DB9; + 1423360 bytes downloaded
[06:23:28] Initial: 4D3E; + 1433600 bytes downloaded
[06:23:28] Initial: BD6D; + 1443840 bytes downloaded
[06:23:29] Initial: 096A; + 1454080 bytes downloaded
[06:23:29] Initial: FADA; + 1464320 bytes downloaded
[06:23:30] Initial: 9A9A; + 1474560 bytes downloaded
[06:23:30] Initial: 3A36; + 1484800 bytes downloaded
[06:23:31] Initial: 0755; + 1495040 bytes downloaded
[06:23:31] Initial: 63B1; + 1505280 bytes downloaded
[06:23:31] Initial: 3D45; + 1515520 bytes downloaded
[06:23:32] Initial: 6070; + 1525760 bytes downloaded
[06:23:32] Initial: 3166; + 1536000 bytes downloaded
[06:23:32] Initial: 0182; + 1546240 bytes downloaded
[06:23:33] Initial: 8B62; + 1556480 bytes downloaded
[06:23:33] Initial: 02EF; + 1566720 bytes downloaded
[06:23:34] Initial: E684; + 1576960 bytes downloaded
[06:23:34] Initial: E11D; + 1587200 bytes downloaded
[06:23:34] Initial: 4C2E; + 1597440 bytes downloaded
[06:23:35] Initial: 319F; + 1607680 bytes downloaded
[06:23:35] Initial: 3141; + 1617920 bytes downloaded
[06:23:36] Initial: B173; + 1628160 bytes downloaded
[06:23:36] Initial: CCCE; + 1638400 bytes downloaded
[06:23:36] Initial: 6DF8; + 1648640 bytes downloaded
[06:23:37] Initial: 8C8C; + 1658880 bytes downloaded
[06:23:37] Initial: 1C34; + 1669120 bytes downloaded
[06:23:38] Initial: 664D; + 1679360 bytes downloaded
[06:23:38] Initial: C7E1; + 1689600 bytes downloaded
[06:23:38] Initial: 4082; + 1699840 bytes downloaded
[06:23:39] Initial: C672; + 1710080 bytes downloaded
[06:23:40] Initial: 2746; + 1720320 bytes downloaded
[06:23:40] Initial: 5D75; + 1730560 bytes downloaded
[06:23:40] Initial: A952; + 1740800 bytes downloaded
[06:23:41] Initial: 3BDC; + 1751040 bytes downloaded
[06:23:41] Initial: CA86; + 1761280 bytes downloaded
[06:23:41] Initial: 0403; + 1771520 bytes downloaded
[06:23:42] Initial: 6068; + 1781760 bytes downloaded
[06:23:42] Initial: 129F; + 1792000 bytes downloaded
[06:23:43] Initial: 9D44; + 1802240 bytes downloaded
[06:23:43] Initial: 8A8B; + 1812480 bytes downloaded
[06:23:44] Initial: A52C; + 1822720 bytes downloaded
[06:23:44] Initial: AC26; + 1832960 bytes downloaded
[06:23:45] Initial: 6D71; + 1843200 bytes downloaded
[06:23:45] Initial: 2CEB; + 1853440 bytes downloaded
[06:23:45] Initial: 5DB1; + 1863680 bytes downloaded
[06:23:46] Initial: 1F3F; + 1873920 bytes downloaded
[06:23:46] Initial: 2661; + 1884160 bytes downloaded
[06:23:46] Initial: CE3E; + 1894400 bytes downloaded
[06:23:47] Initial: 635C; + 1904640 bytes downloaded
[06:23:48] Initial: 77AF; + 1914880 bytes downloaded
[06:23:48] Initial: BE60; + 1925120 bytes downloaded
[06:23:48] Initial: A88C; + 1935360 bytes downloaded
[06:23:49] Initial: B673; + 1945600 bytes downloaded
[06:23:49] Initial: 635C; + 1955840 bytes downloaded
[06:23:50] Initial: B4AD; + 1966080 bytes downloaded
[06:23:50] Initial: A253; + 1976320 bytes downloaded
[06:23:51] Initial: 3556; + 1986560 bytes downloaded
[06:23:51] Initial: E88B; + 1996800 bytes downloaded
[06:23:52] Initial: 3097; + 2007040 bytes downloaded
[06:23:52] Initial: B239; + 2017280 bytes downloaded
[06:23:52] Initial: 14DD; + 2027520 bytes downloaded
[06:23:53] Initial: F5E7; + 2037760 bytes downloaded
[06:23:53] Initial: C10B; + 2048000 bytes downloaded
[06:23:54] Initial: 5961; + 2058240 bytes downloaded
[06:23:54] Initial: 2B05; + 2068480 bytes downloaded
[06:23:55] Initial: 6789; + 2078720 bytes downloaded
[06:23:55] Initial: E5A6; + 2088960 bytes downloaded
[06:23:56] Initial: 367E; + 2099200 bytes downloaded
[06:23:56] Initial: 44C4; + 2109440 bytes downloaded
[06:23:57] Initial: 144F; + 2119680 bytes downloaded
[06:23:57] Initial: EB8F; + 2129920 bytes downloaded
[06:23:58] Initial: 19F9; + 2140160 bytes downloaded
[06:23:58] Initial: A41F; + 2150400 bytes downloaded
[06:23:59] Initial: E126; + 2160640 bytes downloaded
[06:23:59] Initial: 5D6D; + 2170880 bytes downloaded
[06:23:59] Initial: 77DE; + 2181120 bytes downloaded
[06:24:00] Initial: 3DA2; + 2191360 bytes downloaded
[06:24:01] Initial: 6C36; + 2201600 bytes downloaded
[06:24:01] Initial: 8320; + 2211840 bytes downloaded
[06:24:02] Initial: 4CD4; + 2222080 bytes downloaded
[06:24:02] Initial: 0574; + 2232320 bytes downloaded
[06:24:02] Initial: 13AA; + 2242560 bytes downloaded
[06:24:03] Initial: 0909; + 2252800 bytes downloaded
[06:24:04] Initial: 0822; + 2263040 bytes downloaded
[06:24:04] Initial: F257; + 2273280 bytes downloaded
[06:24:04] Initial: 47C6; + 2283520 bytes downloaded
[06:24:05] Initial: 2ACD; + 2293760 bytes downloaded
[06:24:06] Initial: 1ED5; + 2304000 bytes downloaded
[06:24:06] Initial: 0C41; + 2314240 bytes downloaded
[06:24:07] Initial: 6861; + 2324480 bytes downloaded
[06:24:07] Initial: 7EBC; + 2334720 bytes downloaded
[06:24:07] Initial: 516B; + 2344960 bytes downloaded
[06:24:08] Initial: E95B; + 2355200 bytes downloaded
[06:24:08] Initial: 1896; + 2365440 bytes downloaded
[06:24:09] Initial: 8561; + 2375680 bytes downloaded
[06:24:09] Initial: 8889; + 2385920 bytes downloaded
[06:24:10] Initial: 51D2; + 2396160 bytes downloaded
[06:24:10] Initial: 5829; + 2406400 bytes downloaded
[06:24:11] Initial: 8461; + 2416640 bytes downloaded
[06:24:12] Initial: DCE4; + 2426880 bytes downloaded
[06:24:12] Initial: 61F4; + 2437120 bytes downloaded
[06:24:12] Initial: A0C9; + 2447360 bytes downloaded
[06:24:13] Initial: 5F9D; + 2457600 bytes downloaded
[06:24:13] Initial: 9EA8; + 2467840 bytes downloaded
[06:24:14] Initial: 45F3; + 2478080 bytes downloaded
[06:24:15] Initial: E7D9; + 2488320 bytes downloaded
[06:24:15] Initial: BF5F; + 2498560 bytes downloaded
[06:24:15] Initial: 76D1; + 2508800 bytes downloaded
[06:24:16] Initial: 314C; + 2519040 bytes downloaded
[06:24:17] Initial: C86D; + 2529280 bytes downloaded
[06:24:17] Initial: 1EFB; + 2539520 bytes downloaded
[06:24:18] Initial: 36C8; + 2549760 bytes downloaded
[06:24:18] Initial: 0B3C; + 2560000 bytes downloaded
[06:24:19] Initial: 91AB; + 2570240 bytes downloaded
[06:24:19] Initial: 03A4; + 2580480 bytes downloaded
[06:24:20] Initial: 033E; + 2590720 bytes downloaded
[06:24:20] Initial: E07D; + 2600960 bytes downloaded
[06:24:21] Initial: 8770; + 2611200 bytes downloaded
[06:24:22] Initial: 9910; + 2621440 bytes downloaded
[06:24:22] Initial: E776; + 2631680 bytes downloaded
[06:24:23] Initial: 9889; + 2641920 bytes downloaded
[06:24:23] Initial: A29F; + 2652160 bytes downloaded
[06:24:24] Initial: F7C5; + 2662400 bytes downloaded
[06:24:24] Initial: 1AEE; + 2672640 bytes downloaded
[06:24:25] Initial: 7371; + 2682880 bytes downloaded
[06:24:25] Initial: 99B8; + 2693120 bytes downloaded
[06:24:26] Initial: 57DF; + 2703360 bytes downloaded
[06:24:27] Initial: CCD4; + 2713600 bytes downloaded
[06:24:27] Initial: 0976; + 2723840 bytes downloaded
[06:24:27] Initial: CB6B; + 2734080 bytes downloaded
[06:24:28] Initial: 2E34; + 2744320 bytes downloaded
[06:24:29] Initial: 0735; + 2754560 bytes downloaded
[06:24:29] Initial: 5EC8; + 2764800 bytes downloaded
[06:24:30] Initial: B637; + 2775040 bytes downloaded
[06:24:30] Initial: DFEA; + 2785280 bytes downloaded
[06:24:31] Initial: 13D0; + 2795520 bytes downloaded
[06:24:31] Initial: 5B1A; + 2805760 bytes downloaded
[06:24:32] Initial: 205F; + 2816000 bytes downloaded
[06:24:33] Initial: 0026; + 2826240 bytes downloaded
[06:24:33] Initial: B75D; + 2836480 bytes downloaded
[06:24:34] Initial: 3510; + 2846720 bytes downloaded
[06:24:34] Initial: 5BAD; + 2856960 bytes downloaded
[06:24:35] Initial: 95A1; + 2867200 bytes downloaded
[06:24:36] Initial: CBDD; + 2877440 bytes downloaded
[06:24:36] Initial: DB86; + 2887680 bytes downloaded
[06:24:37] Initial: D1CA; + 2897920 bytes downloaded
[06:24:37] Initial: 85C7; + 2908160 bytes downloaded
[06:24:38] Initial: 4C7D; + 2918400 bytes downloaded
[06:24:38] Initial: BF2C; + 2928640 bytes downloaded
[06:24:39] Initial: 3EAE; + 2938880 bytes downloaded
[06:24:39] Initial: 6206; + 2949120 bytes downloaded
[06:24:40] Initial: 6312; + 2959360 bytes downloaded
[06:24:41] Initial: CBA6; + 2969600 bytes downloaded
[06:24:41] Initial: 79FD; + 2979840 bytes downloaded
[06:24:42] Initial: 8C8D; + 2990080 bytes downloaded
[06:24:43] Initial: 7D4F; + 3000320 bytes downloaded
[06:24:43] Initial: 2A2D; + 3010560 bytes downloaded
[06:24:44] Initial: B9E9; + 3020800 bytes downloaded
[06:24:44] Initial: 6557; + 3028785 bytes downloaded
[06:24:47] Verifying core Core_a3.fah...
[06:24:47] Signature is VALID
[06:24:47] 
[06:24:47] Trying to unzip core FahCore_a3.exe
[06:24:47] Decompressed FahCore_a3.exe (10057216 bytes) successfully
[06:24:52] + Core successfully engaged
[06:24:58] 
[06:24:58] + Processing work unit
[06:24:58] Core required: FahCore_a3.exe
[06:24:58] Core found.
[06:24:58] Working on queue slot 02 [June 11 06:24:58 UTC]
[06:24:58] + Working ...
[06:24:58] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 7 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 5288 -version 634'

[06:24:58] 
[06:24:58] *------------------------------*
[06:24:58] Folding@Home Gromacs SMP Core
[06:24:58] Version 2.27 (Dec. 15, 2010)
[06:24:58] 
[06:24:58] Preparing to commence simulation
[06:24:58] - Assembly optimizations manually forced on.
[06:24:58] - Not checking prior termination.
[06:24:58] - Expanded 1775089 -> 2279088 (decompressed 128.3 percent)
[06:24:58] Called DecompressByteArray: compressed_data_size=1775089 data_size=2279088, decompressed_data_size=2279088 diff=0
[06:24:58] - Digital signature verified
[06:24:58] 
[06:24:58] Project: 6951 (Run 0, Clone 76, Gen 161)
[06:24:58] 
[06:24:58] Assembly optimizations on if available.
[06:24:58] Entering M.D.
[06:25:04] Mapping NT from 7 to 7 
[06:25:04] Completed 0 out of 500000 steps (0%)
[06:29:22] Completed 5000 out of 500000 steps (1%)
[06:33:42] Completed 10000 out of 500000 steps (2%)
[06:37:57] Completed 15000 out of 500000 steps (3%)
[06:42:03] Completed 20000 out of 500000 steps (4%)
[06:46:18] Completed 25000 out of 500000 steps (5%)
[06:50:38] Completed 30000 out of 500000 steps (6%)
[06:54:56] Completed 35000 out of 500000 steps (7%)
[06:59:09] Completed 40000 out of 500000 steps (8%)
[07:03:25] Completed 45000 out of 500000 steps (9%)
[07:07:35] Completed 50000 out of 500000 steps (10%)
[07:11:46] Completed 55000 out of 500000 steps (11%)
[07:16:05] Completed 60000 out of 500000 steps (12%)
[07:20:21] Completed 65000 out of 500000 steps (13%)
[07:24:37] Completed 70000 out of 500000 steps (14%)
[07:29:19] Completed 75000 out of 500000 steps (15%)
[07:34:14] Completed 80000 out of 500000 steps (16%)
[07:38:49] Completed 85000 out of 500000 steps (17%)
[07:43:24] Completed 90000 out of 500000 steps (18%)
[07:46:02] - Couldn't send HTTP request to server
[07:46:02] + Could not connect to Work Server (results)
[07:46:02] (130.237.232.141:8080)
[07:46:02] + Retrying using alternative port
[07:46:02] Connecting to http://130.237.232.141:80/
[07:46:04] - Couldn't send HTTP request to server
[07:46:04] + Could not connect to Work Server (results)
[07:46:04] (130.237.232.141:80)
[07:46:04] - Error: Could not transmit unit 01 (completed June 10) to work server.
[07:46:04] - 5 failed uploads of this unit.


[07:46:04] + Attempting to send results [June 11 07:46:04 UTC]
[07:46:04] - Reading file work/wuresults_01.dat from core
[07:46:04] (Read 100150162 bytes from disk)
[07:46:04] Connecting to http://130.237.165.141:8080/
[07:46:04] - Couldn't send HTTP request to server
[07:46:04] + Could not connect to Work Server (results)
[07:46:04] (130.237.165.141:8080)
[07:46:04] + Retrying using alternative port
[07:46:04] Connecting to http://130.237.165.141:80/
[07:46:04] - Couldn't send HTTP request to server
[07:46:04] + Could not connect to Work Server (results)
[07:46:04] (130.237.165.141:80)
[07:46:04] Could not transmit unit 01 to Collection server; keeping in queue.
[07:46:04] + Sent 0 of 1 completed units to the server
[07:46:04] - Autosend completed
[07:47:45] Completed 95000 out of 500000 steps (19%)
[07:49:00] Killing all core threads
[07:49:00] Could not get process id information. Please kill core process manually

Folding@Home Client Shutdown at user request.
[07:49:00] ***** Got a SIGTERM signal (2)
[07:49:00] Killing all core threads
[07:49:00] Could not get process id information. Please kill core process manually

Folding@Home Client Shutdown.


--- Opening Log file [June 11 08:03:44 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

Folding@Home Client Version 6.34

http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: F:\Folding\SMP
Executable: F:\Folding\FAH.exe
Arguments: -oneunit -forceasm -smp 7 -bigadv -verbosity 9 

[08:03:44] - Ask before connecting: No
[08:03:44] - User name: OT6889 (Team 111065)
[08:03:44] - User ID: 4B58909571ADA0AB
[08:03:44] - Machine ID: 2
[08:03:44] 
[08:03:44] Loaded queue successfully.
[08:03:44] 
[08:03:44] + Processing work unit
[08:03:44] - Autosending finished units... [June 11 08:03:44 UTC]
[08:03:44] Core required: FahCore_a3.exe
[08:03:44] Trying to send all finished work units
[08:03:44] Core found.
[08:03:44] Project: 6900 (Run 29, Clone 14, Gen 1)


[08:03:44] + Attempting to send results [June 11 08:03:44 UTC]
[08:03:44] - Reading file work/wuresults_01.dat from core
[08:03:44] Working on queue slot 02 [June 11 08:03:44 UTC]
[08:03:44] (Read 100150162 bytes from disk)
[08:03:44] + Working ...
[08:03:44] Connecting to http://130.237.232.141:8080/
[08:03:44] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 7 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 5932 -version 634'

[08:03:44] 
[08:03:44] *------------------------------*
[08:03:44] Folding@Home Gromacs SMP Core
[08:03:44] Version 2.27 (Dec. 15, 2010)
[08:03:44] 
[08:03:44] Preparing to commence simulation
[08:03:44] - Ensuring status. Please wait.
[08:03:54] - Assembly optimizations manually forced on.
[08:03:54] - Not checking prior termination.
[08:03:54] - Expanded 1775089 -> 2279088 (decompressed 128.3 percent)
[08:03:54] Called DecompressByteArray: compressed_data_size=1775089 data_size=2279088, decompressed_data_size=2279088 diff=0
[08:03:54] - Digital signature verified
[08:03:54] 
[08:03:54] Project: 6951 (Run 0, Clone 76, Gen 161)
[08:03:54] 
[08:03:54] Assembly optimizations on if available.
[08:03:54] Entering M.D.
[08:04:00] Using Gromacs checkpoints
[08:04:00] Mapping NT from 7 to 7 
[08:04:01] Resuming from checkpoint
[08:04:01] Verified work/wudata_02.log
[08:04:01] Verified work/wudata_02.trr
[08:04:01] Verified work/wudata_02.edr
[08:04:01] Completed 93092 out of 500000 steps (18%)
[08:05:28] Completed 95000 out of 500000 steps (19%)
[08:09:26] Completed 100000 out of 500000 steps (20%)
[08:13:24] Completed 105000 out of 500000 steps (21%)

Hope i don't lose this one as i lost the last due to program error

Folding Forum

130.237.232.141 (P6900 unable to upload)

Project: Project: 6900 (Run 54, Clone 11, Gen 1)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Project: 6900 (Run 12, Clone 1, Gen 3) failed upload

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)

Re: Project: 6900 (Run 12, Clone 1, Gen 3) failed upload

Re: Project: Project: 6900 (Run 54, Clone 11, Gen 1)

Re: Project: Project: 6900 (Run 54, Clone 11, Gen 1)

Re: 130.237.232.141 (P6900 unable to upload)

Re: 130.237.232.141 (P6900 unable to upload)