Project: 6503 (Run 15, Clone 513, Gen 96)

[djohnston]

This WU has aborted 8 times at 31%, but is still running for the 9th time. It will not pick up a new work unit. Error message is:

[00:00:12] Completed 77500 out of 250000 steps (31%)
[00:03:41] CoreStatus = 0 (0)
[00:03:41] Client-core communications error: ERROR 0x0
[00:03:41] Deleting current work unit & continuing...
[00:04:16] - Read packet limit of 540015616... Set to 524286976.

WU was acquired from server 171.64.65.62.

[bruce]

There's one error in the Mod DB. I'll mark it for follow-up.

Change your MachineID so you get a different WU.

[djohnston]

Thanks, bruce. I have one other problem with this client. It still has completed WUs to send but can't, due to connection errors with servers 171.64.65.111 and 171.67.108.17.

[codysluder]

Your last post is both a double post and off-topic, both of which are prohibited on this forum. You should get your answer here: viewtopic.php?f=18&t=18492 when there's something to say. Lack of an answer doesn't mean nobody has noticed nor does it mean nothing is being done about it.

[djohnston]

Your last post is both a double post and off-topic, both of which are prohibited on this forum. You should get your answer here: viewtopic.php?f=18&t=18492 when there's something to say. Lack of an answer doesn't mean nobody has noticed nor does it mean nothing is being done about it.

My intent was not to draw attention to the other post. My intent was to solicit a possible suggestion as to what to do with the completed work unit, not yet transmitted. The point is now moot. After 11 runs, Project: 6503 (Run 15, Clone 513, Gen 96) aborted again and deleted everything in the queue. As a result, the completed results for Project: 6316 (Run 698, Clone 1, Gen 141) are irretrievably gone. Edited logfile is shown below.

Code: Select all

[11:29:22] + Attempting to send results
[11:29:35] + Results successfully sent
[11:29:35] Thank you for your contribution to Folding@Home.
[11:29:35] + Number of Units Completed: 520

[11:29:54] - Preparing to get new work unit...
[11:29:54] + Attempting to get work packet
[11:29:54] - Connecting to assignment server
[11:29:54] - Successful: assigned to (171.64.65.111).
[11:29:54] + News From Folding@Home: Welcome to Folding@Home
[11:29:55] Loaded queue successfully.
[11:29:57] + Closed connections
[11:29:57] 
[11:29:57] + Processing work unit
[11:29:57] Core required: FahCore_78.exe
[11:29:57] Core found.
[11:29:57] Working on Unit 06 [April 21 11:29:57]
[11:29:57] + Working ...
[11:29:57] 
[11:29:57] *------------------------------*
[11:29:57] Folding@Home Gromacs Core
[11:29:57] Version 1.90 (March 8, 2006)
[11:29:57] 
[11:29:57] Preparing to commence simulation
[11:29:57] - Looking at optimizations...
[11:29:57] - Created dyn
[11:29:57] - Files status OK
[11:29:57] - Expanded 462804 -> 2244013 (decompressed 484.8 percent)
[11:29:57] - Starting from initial work packet
[11:29:57] 
[11:29:57] Project: 6316 (Run 698, Clone 1, Gen 141)
[11:29:57] 
[11:29:57] Assembly optimizations on if available.
[11:29:57] Entering M.D.
[11:30:03] Protein: p6316_sh3_with_ALA_frags
[11:30:03] 
[11:30:04] Writing local files
[11:30:04] Extra SSE boost OK.
[11:30:04] Writing local files
[11:30:04] Completed 0 out of 500000 steps  (0%)
[11:58:01] Writing local files
[11:58:01] Completed 5000 out of 500000 steps  (1%)
[12:25:58] Writing local files
...........................................................................................................................
[10:36:13] Completed 495000 out of 500000 steps  (99%)
[11:04:15] Writing local files
[11:04:15] Completed 500000 out of 500000 steps  (100%)
[11:04:15] Writing final coordinates.
[11:04:16] Past main M.D. loop
[11:05:16] 
[11:05:16] Finished Work Unit:
[11:05:16] - Reading up to 362448 from "work/wudata_06.arc": Read 362448
[11:05:16] - Reading up to 3518704 from "work/wudata_06.xtc": Read 3518704
[11:05:16] goefile size: 0
[11:05:16] logfile size: 894295
[11:05:16] Leaving Run
[11:05:19] - Writing 6539739 bytes of core data to disk...
[11:05:23] Done: 6539227 -> 4731541 (compressed to 72.3 percent)
[11:05:23]   ... Done.
[11:05:50] - Shutting down core
[11:05:50] 
[11:05:50] Folding@home Core Shutdown: FINISHED_UNIT
[11:06:08] CoreStatus = 64 (100)
[11:06:09] Sending work to server
[11:06:09] - Read packet limit of 540015616... Set to 524286976.


[11:06:42] + Attempting to send results
[11:07:03] - Couldn't send HTTP request to server
[11:07:03] + Could not connect to Work Server (results)
[11:07:03]     (171.67.108.17:8080)
[11:07:03]   Could not transmit unit 06 to Collection server; keeping in queue.
[11:07:03] + Closed connections
[11:07:03] 
[11:07:03] + Processing work unit
[11:07:03] Core required: FahCore_78.exe
[11:07:03] Core found.
[11:07:03] Working on Unit 07 [April 23 11:07:03]
[11:07:03] + Working ...
[11:07:03] 
[11:07:03] *------------------------------*
[11:07:03] Folding@Home Gromacs Core
[11:07:03] Version 1.90 (March 8, 2006)
[11:07:03] 
[11:07:03] Preparing to commence simulation
[11:07:03] - Looking at optimizations...
[11:07:03] - Created dyn
[11:07:03] - Files status OK
[11:07:03] - Expanded 685612 -> 3404213 (decompressed 496.5 percent)
[11:07:03] - Starting from initial work packet
[11:07:03] 
[11:07:03] Project: 6526 (Run 19, Clone 33, Gen 99)
[11:07:03] 
[11:07:03] Assembly optimizations on if available.
[11:07:03] Entering M.D.
[11:07:10] Protein: proA_20 in water
[11:07:10] 
[11:07:10] Writing local files
[11:07:10] Extra SSE boost OK.
[11:07:11] Writing local files
[11:07:11] Completed 0 out of 250000 steps  (0%)
[11:26:47] Writing local files
[11:26:47] Completed 2500 out of 250000 steps  (1%)
[11:46:26] Writing local files
.........................................................................................................................
[04:51:40] Completed 247500 out of 250000 steps  (99%)
[05:00:56] Writing local files
[05:00:56] Completed 250000 out of 250000 steps  (100%)
[05:00:56] Writing final coordinates.
[05:00:56] Past main M.D. loop
[05:01:56] 
[05:01:56] Finished Work Unit:
[05:01:56] - Reading up to 574704 from "work/wudata_07.arc": Read 574704
[05:01:56] - Reading up to 148808 from "work/wudata_07.xtc": Read 148808
[05:01:56] goefile size: 0
[05:01:56] logfile size: 67824
[05:01:56] Leaving Run
[05:02:00] - Writing 859332 bytes of core data to disk...
[05:02:01] Done: 858820 -> 736544 (compressed to 85.7 percent)
[05:02:01]   ... Done.
[05:02:09] - Shutting down core
[05:02:09] 
[05:02:09] Folding@home Core Shutdown: FINISHED_UNIT
[05:02:32] CoreStatus = 64 (100)
[05:02:32] Sending work to server
[05:02:32] - Read packet limit of 540015616... Set to 524286976.


[05:02:32] + Attempting to send results
[05:02:35] + Results successfully sent
[05:02:35] Thank you for your contribution to Folding@Home.
[05:02:35] + Number of Units Completed: 521

[05:02:38] - Read packet limit of 540015616... Set to 524286976.


[05:02:38] + Attempting to send results
[05:02:41] - Couldn't send HTTP request to server
[05:02:41] + Could not connect to Work Server (results)
[05:02:41]     (171.64.65.111:8080)
[05:02:41] - Error: Could not transmit unit 06 (completed April 23) to work server.
[05:02:41] - Read packet limit of 540015616... Set to 524286976.

[05:03:29] + Processing work unit
[05:03:29] Core required: FahCore_78.exe
[05:03:29] Core found.
[05:03:29] Working on Unit 08 [April 24 05:03:29]
[05:03:29] + Working ...
[05:03:29] 
[05:03:29] *------------------------------*
[05:03:29] Folding@Home Gromacs Core
[05:03:29] Version 1.90 (March 8, 2006)
[05:03:29] 
[05:03:29] Preparing to commence simulation
[05:03:29] - Looking at optimizations...
[05:03:29] - Created dyn
[05:03:29] - Files status OK
[05:03:29] - Expanded 404569 -> 1986253 (decompressed 490.9 percent)
[05:03:29] - Starting from initial work packet
[05:03:29] 
[05:03:29] Project: 6500 (Run 14, Clone 147, Gen 71)
[05:03:29] 
[05:03:29] Assembly optimizations on if available.
[05:03:29] Entering M.D.
[05:03:35] Protein: TR538_15 in water
[05:03:35] 
[05:03:35] Writing local files
[05:03:35] Extra SSE boost OK.
[05:03:35] Writing local files
[05:03:35] Completed 0 out of 250000 steps  (0%)
[05:08:50] Writing local files
[05:08:50] Completed 2500 out of 250000 steps  (1%)
[05:14:03] Writing local files
.........................................................................................................................
[13:41:10] Completed 247500 out of 250000 steps  (99%)
[13:46:24] Writing local files
[13:46:24] Completed 250000 out of 250000 steps  (100%)
[13:46:24] Writing final coordinates.
[13:46:24] Past main M.D. loop
[13:47:24] 
[13:47:24] Finished Work Unit:
[13:47:24] - Reading up to 322176 from "work/wudata_08.arc": Read 322176
[13:47:24] - Reading up to 152492 from "work/wudata_08.xtc": Read 152492
[13:47:24] goefile size: 0
[13:47:24] logfile size: 52376
[13:47:24] Leaving Run
[13:47:28] - Writing 595040 bytes of core data to disk...
[13:47:28] Done: 594528 -> 512089 (compressed to 86.1 percent)
[13:47:28]   ... Done.
[13:47:34] - Shutting down core
[13:47:34] 
[13:47:34] Folding@home Core Shutdown: FINISHED_UNIT
[13:47:47] CoreStatus = 64 (100)
[13:47:47] Sending work to server
[13:47:47] - Read packet limit of 540015616... Set to 524286976.


[13:47:47] + Attempting to send results
[13:47:50] + Results successfully sent
[13:47:50] Thank you for your contribution to Folding@Home.
[13:47:50] + Number of Units Completed: 522

[13:47:52] - Read packet limit of 540015616... Set to 524286976.


[13:47:55] + Attempting to send results
[13:48:16] - Couldn't send HTTP request to server
[13:48:16] + Could not connect to Work Server (results)
[13:48:16]     (171.67.108.17:8080)
[13:48:16]   Could not transmit unit 06 to Collection server; keeping in queue.
[13:48:16] - Preparing to get new work unit...
[13:48:16] + Attempting to get work packet
[13:48:16] - Connecting to assignment server
[13:48:16] - Successful: assigned to (171.64.65.62).
[13:48:16] + News From Folding@Home: Welcome to Folding@Home
[13:48:17] Loaded queue successfully.
[13:48:19] - Read packet limit of 540015616... Set to 524286976.


[13:48:43] 
[13:48:43] + Processing work unit
[13:48:43] Core required: FahCore_78.exe
[13:48:43] Core found.
[13:48:43] Working on Unit 09 [April 24 13:48:43]
[13:48:43] + Working ...
[13:48:43] 
[13:48:43] *------------------------------*
[13:48:43] Folding@Home Gromacs Core
[13:48:43] Version 1.90 (March 8, 2006)
[13:48:43] 
[13:48:43] Preparing to commence simulation
[13:48:43] - Looking at optimizations...
[13:48:43] - Created dyn
[13:48:43] - Files status OK
[13:48:44] - Expanded 652177 -> 3265345 (decompressed 500.6 percent)
[13:48:44] - Starting from initial work packet
[13:48:44] 
[13:48:44] Project: 6521 (Run 5, Clone 3, Gen 39)
[13:48:44] 
[13:48:44] Assembly optimizations on if available.
[13:48:44] Entering M.D.
[13:48:50] Protein: ubiq_6 in water
[13:48:50] 
[13:48:50] Writing local files
[13:48:50] Extra SSE boost OK.
[13:48:50] Writing local files
[13:48:50] Completed 0 out of 250000 steps  (0%)
[13:57:37] Writing local files
[13:57:37] Completed 2500 out of 250000 steps  (1%)
[14:06:24] Writing local files
.........................................................................................................................
[04:31:18] Completed 247500 out of 250000 steps  (99%)
[04:40:02] Writing local files
[04:40:02] Completed 250000 out of 250000 steps  (100%)
[04:40:02] Writing final coordinates.
[04:40:03] Past main M.D. loop
[04:41:03] 
[04:41:03] Finished Work Unit:
[04:41:03] - Reading up to 536112 from "work/wudata_09.arc": Read 536112
[04:41:03] - Reading up to 241716 from "work/wudata_09.xtc": Read 241716
[04:41:03] goefile size: 0
[04:41:03] logfile size: 53452
[04:41:03] Leaving Run
[04:41:05] - Writing 887540 bytes of core data to disk...
[04:41:05] Done: 887028 -> 786099 (compressed to 88.6 percent)
[04:41:05]   ... Done.
[04:41:14] - Shutting down core
[04:41:14] 
[04:41:14] Folding@home Core Shutdown: FINISHED_UNIT
[04:41:34] CoreStatus = 64 (100)
[04:41:34] Sending work to server
[04:41:34] - Read packet limit of 540015616... Set to 524286976.


[04:41:34] + Attempting to send results
[04:41:38] + Results successfully sent
[04:41:38] Thank you for your contribution to Folding@Home.
[04:41:38] + Number of Units Completed: 523


[04:42:10] + Attempting to send results
[04:42:31] - Couldn't send HTTP request to server
[04:42:31] + Could not connect to Work Server (results)
[04:42:31]     (171.67.108.17:8080)
[04:42:31]   Could not transmit unit 06 to Collection server; keeping in queue.
[04:42:31] + Closed connections
[04:42:31] 
[04:42:31] + Processing work unit
[04:42:31] Core required: FahCore_78.exe
[04:42:31] Core found.
[04:42:31] Working on Unit 00 [April 25 04:42:31]
[04:42:31] + Working ...
[04:42:32] 
[04:42:32] *------------------------------*
[04:42:32] Folding@Home Gromacs Core
[04:42:32] Version 1.90 (March 8, 2006)
[04:42:32] 
[04:42:32] Preparing to commence simulation
[04:42:32] - Looking at optimizations...
[04:42:32] - Created dyn
[04:42:32] - Files status OK
[04:42:32] - Expanded 628295 -> 3100249 (decompressed 493.4 percent)
[04:42:32] - Starting from initial work packet
[04:42:32] 
[04:42:32] Project: 6507 (Run 1, Clone 232, Gen 83)
[04:42:32] 
[04:42:32] Assembly optimizations on if available.
[04:42:32] Entering M.D.
[04:42:38] Protein: 1CFC_B_2 in water
[04:42:38] 
[04:42:38] Writing local files
[04:42:38] Extra SSE boost OK.
[04:42:39] Writing local files
[04:42:39] Completed 0 out of 250000 steps  (0%)
[04:51:07] Writing local files
[04:51:07] Completed 2500 out of 250000 steps  (1%)
[04:59:35] Writing local files
..........................................................................................................................
[19:01:29] Completed 247500 out of 250000 steps  (99%)
[19:09:57] Writing local files
[19:09:57] Completed 250000 out of 250000 steps  (100%)
[19:09:57] Writing final coordinates.
[19:09:57] Past main M.D. loop
[19:10:57] 
[19:10:57] Finished Work Unit:
[19:10:57] - Reading up to 510792 from "work/wudata_00.arc": Read 510792
[19:10:57] - Reading up to 47088 from "work/wudata_00.xtc": Read 47088
[19:10:57] goefile size: 0
[19:10:57] logfile size: 20802
[19:10:57] Leaving Run
[19:10:58] - Writing 588890 bytes of core data to disk...
[19:10:58] Done: 588378 -> 531885 (compressed to 90.3 percent)
[19:10:58]   ... Done.
[19:11:05] - Shutting down core
[19:11:05] 
[19:11:05] Folding@home Core Shutdown: FINISHED_UNIT
[19:11:26] CoreStatus = 64 (100)
[19:11:26] Sending work to server
[19:11:26] - Read packet limit of 540015616... Set to 524286976.


[19:11:26] + Attempting to send results
[19:11:29] + Results successfully sent
[19:11:29] Thank you for your contribution to Folding@Home.
[19:11:29] + Number of Units Completed: 524


[19:12:01] + Attempting to send results
[19:12:22] - Couldn't send HTTP request to server
[19:12:22] + Could not connect to Work Server (results)
[19:12:22]     (171.67.108.17:8080)
[19:12:22]   Could not transmit unit 06 to Collection server; keeping in queue.
[19:12:22] + Closed connections
[19:12:22] 
[19:12:22] + Processing work unit
[19:12:22] Core required: FahCore_78.exe
[19:12:22] Core found.
[19:12:22] Working on Unit 01 [April 25 19:12:22]
[19:12:22] + Working ...
[19:12:22] 
[19:12:22] *------------------------------*
[19:12:22] Folding@Home Gromacs Core
[19:12:22] Version 1.90 (March 8, 2006)
[19:12:22] 
[19:12:22] Preparing to commence simulation
[19:12:22] - Looking at optimizations...
[19:12:22] - Created dyn
[19:12:22] - Files status OK
[19:12:22] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[19:12:22] - Starting from initial work packet
[19:12:22] 
[19:12:22] Project: 6503 (Run 15, Clone 513, Gen 96)
[19:12:22] 
[19:12:22] Assembly optimizations on if available.
[19:12:22] Entering M.D.
[19:12:28] Protein: TR462_B_16 in water
[19:12:28] 
[19:12:28] Writing local files
[19:12:28] Extra SSE boost OK.
[19:12:28] Writing local files
[19:12:29] Completed 0 out of 250000 steps  (0%)
[19:19:11] Writing local files
[19:19:11] Completed 2500 out of 250000 steps  (1%)
[19:26:22] Writing local files
......................................................................................................................
[22:43:55] Completed 75000 out of 250000 steps  (30%)
[22:50:36] Writing local files
[22:50:36] Completed 77500 out of 250000 steps  (31%)
[22:53:42] CoreStatus = 0 (0)
[22:53:42] Client-core communications error: ERROR 0x0
[22:53:42] Deleting current work unit & continuing...
[22:54:17] - Read packet limit of 540015616... Set to 524286976.


[22:54:20] + Attempting to send results
[22:54:41] - Couldn't send HTTP request to server
[22:54:41] + Could not connect to Work Server (results)
[22:54:41]     (171.67.108.17:8080)
[22:54:41]   Could not transmit unit 06 to Collection server; keeping in queue.
[22:54:41] - Preparing to get new work unit...
[22:54:41] + Attempting to get work packet
[22:54:41] - Connecting to assignment server
[22:54:41] - Successful: assigned to (171.64.65.62).
[22:54:41] + News From Folding@Home: Welcome to Folding@Home
[22:54:41] Loaded queue successfully.
[22:54:43] + Closed connections
[22:54:48] 
[22:54:48] + Processing work unit
[22:54:48] Core required: FahCore_78.exe
[22:54:48] Core found.
[22:54:48] Working on Unit 02 [April 25 22:54:48]
[22:54:48] + Working ...
[22:54:48] 
[22:54:48] *------------------------------*
[22:54:48] Folding@Home Gromacs Core
[22:54:48] Version 1.90 (March 8, 2006)
[22:54:48] 
[22:54:48] Preparing to commence simulation
[22:54:48] - Looking at optimizations...
[22:54:48] - Created dyn
[22:54:48] - Files status OK
[22:54:49] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[22:54:49] - Starting from initial work packet
[22:54:49] 
[22:54:49] Project: 6503 (Run 15, Clone 513, Gen 96)
[22:54:49] 
[22:54:49] Assembly optimizations on if available.
[22:54:49] Entering M.D.
[22:54:55] Protein: TR462_B_16 in water
[22:54:55] 
[22:54:55] Writing local files
[22:54:55] Extra SSE boost OK.
[22:54:55] Writing local files
[22:54:55] Completed 0 out of 250000 steps  (0%)
[23:01:36] Writing local files
[23:01:36] Completed 2500 out of 250000 steps  (1%)
[23:08:17] Writing local files
......................................................................................................................
[02:22:17] Completed 75000 out of 250000 steps  (30%)
[02:29:00] Writing local files
[02:29:00] Completed 77500 out of 250000 steps  (31%)
[02:32:05] CoreStatus = 0 (0)
[02:32:05] Client-core communications error: ERROR 0x0
[02:32:05] Deleting current work unit & continuing...
[02:32:39] - Read packet limit of 540015616... Set to 524286976.


[02:32:42] + Attempting to send results
[02:33:03] - Couldn't send HTTP request to server
[02:33:03] + Could not connect to Work Server (results)
[02:33:03]     (171.67.108.17:8080)
[02:33:03]   Could not transmit unit 06 to Collection server; keeping in queue.
[02:33:03] - Preparing to get new work unit...
[02:33:03] + Attempting to get work packet
[02:33:03] - Connecting to assignment server
[02:33:03] - Successful: assigned to (171.64.65.62).
[02:33:03] + News From Folding@Home: Welcome to Folding@Home
[02:33:03] Loaded queue successfully.
[02:33:07] + Closed connections
[02:33:12] 
[02:33:12] + Processing work unit
[02:33:12] Core required: FahCore_78.exe
[02:33:12] Core found.
[02:33:12] Working on Unit 03 [April 26 02:33:12]
[02:33:12] + Working ...
[02:33:12] 
[02:33:12] *------------------------------*
[02:33:12] Folding@Home Gromacs Core
[02:33:12] Version 1.90 (March 8, 2006)
[02:33:12] 
[02:33:12] Preparing to commence simulation
[02:33:12] - Looking at optimizations...
[02:33:12] - Created dyn
[02:33:12] - Files status OK
[02:33:12] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[02:33:12] - Starting from initial work packet
[02:33:12] 
[02:33:12] Project: 6503 (Run 15, Clone 513, Gen 96)
[02:33:12] 
[02:33:12] Assembly optimizations on if available.
[02:33:12] Entering M.D.
[02:33:18] Protein: TR462_B_16 in water
[02:33:18] 
[02:33:18] Writing local files
[02:33:18] Extra SSE boost OK.
[02:33:18] Writing local files
[02:33:18] Completed 0 out of 250000 steps  (0%)
[02:39:58] Writing local files
[02:39:58] Completed 2500 out of 250000 steps  (1%)
[02:46:41] Writing local files
......................................................................................................................
[05:54:19] Completed 75000 out of 250000 steps  (30%)
[06:01:01] Writing local files
[06:01:01] Completed 77500 out of 250000 steps  (31%)
[06:04:05] CoreStatus = 0 (0)
[06:04:05] Client-core communications error: ERROR 0x0
[06:04:05] - Attempting to download new core...
[06:04:05] + Downloading new core: FahCore_78.exe
[06:04:06] + 10240 bytes downloaded
......................................................................................
[06:04:09] + 1134407 bytes downloaded
[06:04:09] Verifying core Core_78.fah...
[06:04:09] Signature is VALID
[06:04:09] 
[06:04:09] Trying to unzip core FahCore_78.exe
[06:04:09] Decompressed FahCore_78.exe (3435296 bytes) successfully
[06:04:09] + Core successfully engaged
[06:04:20] Deleting current work unit & continuing...
[06:04:55] - Read packet limit of 540015616... Set to 524286976.


[06:04:58] + Attempting to send results
[06:05:19] - Couldn't send HTTP request to server
[06:05:19] + Could not connect to Work Server (results)
[06:05:19]     (171.67.108.17:8080)
[06:05:19]   Could not transmit unit 06 to Collection server; keeping in queue.
[06:05:19] - Preparing to get new work unit...
[06:05:19] + Attempting to get work packet
[06:05:19] - Connecting to assignment server
[06:05:19] - Successful: assigned to (171.64.65.62).
[06:05:19] + News From Folding@Home: Welcome to Folding@Home
[06:05:19] Loaded queue successfully.
[06:05:22] + Closed connections
[06:05:27] 
[06:05:27] + Processing work unit
[06:05:27] Core required: FahCore_78.exe
[06:05:27] Core found.
[06:05:27] Working on Unit 04 [April 26 06:05:27]
[06:05:27] + Working ...
[06:05:27] 
[06:05:27] *------------------------------*
[06:05:27] Folding@Home Gromacs Core
[06:05:27] Version 1.90 (March 8, 2006)
[06:05:27] 
[06:05:27] Preparing to commence simulation
[06:05:27] - Looking at optimizations...
[06:05:27] - Created dyn
[06:05:27] - Files status OK
[06:05:27] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[06:05:27] - Starting from initial work packet
[06:05:27] 
[06:05:27] Project: 6503 (Run 15, Clone 513, Gen 96)
[06:05:27] 
[06:05:27] Assembly optimizations on if available.
[06:05:27] Entering M.D.
[06:05:33] Protein: TR462_B_16 in water
[06:05:33] 
[06:05:33] Writing local files
[06:05:33] Extra SSE boost OK.
[06:05:33] Writing local files
[06:05:33] Completed 0 out of 250000 steps  (0%)
[06:12:14] Writing local files
[06:12:14] Completed 2500 out of 250000 steps  (1%)
[06:18:55] Writing local files
......................................................................................................................
[09:26:10] Completed 75000 out of 250000 steps  (30%)
[09:32:50] Writing local files
[09:32:50] Completed 77500 out of 250000 steps  (31%)
[09:35:55] CoreStatus = 0 (0)
[09:35:55] Client-core communications error: ERROR 0x0
[09:35:55] Deleting current work unit & continuing...
[09:36:30] - Read packet limit of 540015616... Set to 524286976.


[09:36:33] + Attempting to send results
[09:36:54] - Couldn't send HTTP request to server
[09:36:54] + Could not connect to Work Server (results)
[09:36:54]     (171.67.108.17:8080)
[09:36:54]   Could not transmit unit 06 to Collection server; keeping in queue.
[09:36:54] - Preparing to get new work unit...
[09:36:54] + Attempting to get work packet
[09:36:54] - Connecting to assignment server
[09:36:54] - Successful: assigned to (171.64.65.62).
[09:36:54] + News From Folding@Home: Welcome to Folding@Home
[09:36:54] Loaded queue successfully.
[09:36:56] + Closed connections
[09:37:01] 
[09:37:01] + Processing work unit
[09:37:01] Core required: FahCore_78.exe
[09:37:01] Core found.
[09:37:01] Working on Unit 05 [April 26 09:37:01]
[09:37:01] + Working ...
[09:37:01] 
[09:37:01] *------------------------------*
[09:37:01] Folding@Home Gromacs Core
[09:37:01] Version 1.90 (March 8, 2006)
[09:37:01] 
[09:37:01] Preparing to commence simulation
[09:37:01] - Looking at optimizations...
[09:37:01] - Created dyn
[09:37:01] - Files status OK
[09:37:02] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[09:37:02] - Starting from initial work packet
[09:37:02] 
[09:37:02] Project: 6503 (Run 15, Clone 513, Gen 96)
[09:37:02] 
[09:37:02] Assembly optimizations on if available.
[09:37:02] Entering M.D.
[09:37:08] Protein: TR462_B_16 in water
[09:37:08] 
[09:37:08] Writing local files
[09:37:08] Extra SSE boost OK.
[09:37:08] Writing local files
[09:37:08] Completed 0 out of 250000 steps  (0%)
[09:43:51] Writing local files
[09:43:51] Completed 2500 out of 250000 steps  (1%)
[09:50:32] Writing local files
......................................................................................................................
[12:58:16] Completed 75000 out of 250000 steps  (30%)
[13:04:58] Writing local files
[13:04:58] Completed 77500 out of 250000 steps  (31%)
[13:08:03] CoreStatus = 0 (0)
[13:08:03] Client-core communications error: ERROR 0x0
[13:08:03] Deleting current work unit & continuing...
[13:08:37] - Read packet limit of 540015616... Set to 524286976.


[13:08:40] + Attempting to send results
[13:09:01] - Couldn't send HTTP request to server
[13:09:01] + Could not connect to Work Server (results)
[13:09:01]     (171.67.108.17:8080)
[13:09:01]   Could not transmit unit 06 to Collection server; keeping in queue.
[13:09:02] - Preparing to get new work unit...
[13:09:02] + Attempting to get work packet
[13:09:02] - Connecting to assignment server
[13:09:02] - Successful: assigned to (171.64.65.62).
[13:09:02] + News From Folding@Home: Welcome to Folding@Home
[13:09:02] Loaded queue successfully.
[13:09:04] + Closed connections
[13:09:09] 
[13:09:09] + Processing work unit
[13:09:09] Core required: FahCore_78.exe
[13:09:09] Core found.
[13:09:09] Working on Unit 07 [April 26 13:09:09]
[13:09:09] + Working ...
[13:09:09] 
[13:09:09] *------------------------------*
[13:09:09] Folding@Home Gromacs Core
[13:09:09] Version 1.90 (March 8, 2006)
[13:09:09] 
[13:09:09] Preparing to commence simulation
[13:09:09] - Looking at optimizations...
[13:09:09] - Created dyn
[13:09:09] - Files status OK
[13:09:10] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[13:09:10] - Starting from initial work packet
[13:09:10] 
[13:09:10] Project: 6503 (Run 15, Clone 513, Gen 96)
[13:09:10] 
[13:09:10] Assembly optimizations on if available.
[13:09:10] Entering M.D.
[13:09:16] Protein: TR462_B_16 in water
[13:09:16] 
[13:09:16] Writing local files
[13:09:16] Extra SSE boost OK.
[13:09:16] Writing local files
[13:09:16] Completed 0 out of 250000 steps  (0%)
[13:15:59] Writing local files
[13:15:59] Completed 2500 out of 250000 steps  (1%)
[13:22:43] Writing local files
......................................................................................................................
[16:36:54] Completed 75000 out of 250000 steps  (30%)
[16:43:36] Writing local files
[16:43:36] Completed 77500 out of 250000 steps  (31%)
[16:46:41] CoreStatus = 0 (0)
[16:46:41] Client-core communications error: ERROR 0x0
[16:46:41] - Attempting to download new core...
[16:46:41] + Downloading new core: FahCore_78.exe
[16:46:41] + 10240 bytes downloaded
.........................................................................................
[16:46:44] + 1134407 bytes downloaded
[16:46:44] Verifying core Core_78.fah...
[16:46:44] Signature is VALID
[16:46:44] 
[16:46:44] Trying to unzip core FahCore_78.exe
[16:46:45] Decompressed FahCore_78.exe (3435296 bytes) successfully
[16:46:45] + Core successfully engaged
[16:46:56] Deleting current work unit & continuing...
[16:47:29] - Read packet limit of 540015616... Set to 524286976.


[16:47:32] + Attempting to send results
[16:47:53] - Couldn't send HTTP request to server
[16:47:53] + Could not connect to Work Server (results)
[16:47:53]     (171.67.108.17:8080)
[16:47:53]   Could not transmit unit 06 to Collection server; keeping in queue.
[16:47:53] - Preparing to get new work unit...
[16:47:53] + Attempting to get work packet
[16:47:53] - Connecting to assignment server
[16:47:54] - Successful: assigned to (171.64.65.62).
[16:47:54] + News From Folding@Home: Welcome to Folding@Home
[16:47:54] Loaded queue successfully.
[16:47:56] + Closed connections
[16:48:01] 
[16:48:01] + Processing work unit
[16:48:01] Core required: FahCore_78.exe
[16:48:01] Core found.
[16:48:01] Working on Unit 08 [April 26 16:48:01]
[16:48:01] + Working ...
[16:48:01] 
[16:48:01] *------------------------------*
[16:48:01] Folding@Home Gromacs Core
[16:48:01] Version 1.90 (March 8, 2006)
[16:48:01] 
[16:48:01] Preparing to commence simulation
[16:48:01] - Looking at optimizations...
[16:48:01] - Created dyn
[16:48:01] - Files status OK
[16:48:01] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[16:48:01] - Starting from initial work packet
[16:48:01] 
[16:48:01] Project: 6503 (Run 15, Clone 513, Gen 96)
[16:48:01] 
[16:48:01] Assembly optimizations on if available.
[16:48:01] Entering M.D.
[16:48:07] Protein: TR462_B_16 in water
[16:48:07] 
[16:48:07] Writing local files
[16:48:07] Extra SSE boost OK.
[16:48:07] Writing local files
[16:48:08] Completed 0 out of 250000 steps  (0%)
[16:54:49] Writing local files
[16:54:49] Completed 2500 out of 250000 steps  (1%)
[17:01:31] Writing local files
......................................................................................................................
[20:09:18] Completed 75000 out of 250000 steps  (30%)
[20:16:02] Writing local files
[20:16:02] Completed 77500 out of 250000 steps  (31%)
[20:19:08] CoreStatus = 0 (0)
[20:19:08] Client-core communications error: ERROR 0x0
[20:19:08] Deleting current work unit & continuing...
[20:19:41] - Read packet limit of 540015616... Set to 524286976.


[20:19:44] + Attempting to send results
[20:20:05] - Couldn't send HTTP request to server
[20:20:05] + Could not connect to Work Server (results)
[20:20:05]     (171.67.108.17:8080)
[20:20:05]   Could not transmit unit 06 to Collection server; keeping in queue.
[20:20:05] - Preparing to get new work unit...
[20:20:05] + Attempting to get work packet
[20:20:05] - Connecting to assignment server
[20:20:05] - Successful: assigned to (171.64.65.62).
[20:20:05] + News From Folding@Home: Welcome to Folding@Home
[20:20:05] Loaded queue successfully.
[20:20:08] + Closed connections
[20:20:13] 
[20:20:13] + Processing work unit
[20:20:13] Core required: FahCore_78.exe
[20:20:13] Core found.
[20:20:13] Working on Unit 09 [April 26 20:20:13]
[20:20:13] + Working ...
[20:20:13] 
[20:20:13] *------------------------------*
[20:20:13] Folding@Home Gromacs Core
[20:20:13] Version 1.90 (March 8, 2006)
[20:20:13] 
[20:20:13] Preparing to commence simulation
[20:20:13] - Looking at optimizations...
[20:20:13] - Created dyn
[20:20:13] - Files status OK
[20:20:13] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[20:20:13] - Starting from initial work packet
[20:20:13] 
[20:20:13] Project: 6503 (Run 15, Clone 513, Gen 96)
[20:20:13] 
[20:20:13] Assembly optimizations on if available.
[20:20:13] Entering M.D.
[20:20:19] Protein: TR462_B_16 in water
[20:20:19] 
[20:20:19] Writing local files
[20:20:19] Extra SSE boost OK.
[20:20:19] Writing local files
[20:20:19] Completed 0 out of 250000 steps  (0%)
[20:27:02] Writing local files
[20:27:02] Completed 2500 out of 250000 steps  (1%)
[20:33:43] Writing local files
......................................................................................................................
[23:52:30] Completed 75000 out of 250000 steps  (30%)
[00:00:12] Writing local files
[00:00:12] Completed 77500 out of 250000 steps  (31%)
[00:03:41] CoreStatus = 0 (0)
[00:03:41] Client-core communications error: ERROR 0x0
[00:03:41] Deleting current work unit & continuing...
[00:04:16] - Read packet limit of 540015616... Set to 524286976.


[00:04:19] + Attempting to send results
[00:04:40] - Couldn't send HTTP request to server
[00:04:40] + Could not connect to Work Server (results)
[00:04:40]     (171.67.108.17:8080)
[00:04:40]   Could not transmit unit 06 to Collection server; keeping in queue.
[00:04:40] - Preparing to get new work unit...
[00:04:40] + Attempting to get work packet
[00:04:40] - Connecting to assignment server
[00:04:40] - Successful: assigned to (171.64.65.62).
[00:04:40] + News From Folding@Home: Welcome to Folding@Home
[00:04:40] Loaded queue successfully.
[00:04:42] + Closed connections
[00:04:47] 
[00:04:47] + Processing work unit
[00:04:47] Core required: FahCore_78.exe
[00:04:47] Core found.
[00:04:47] Working on Unit 00 [April 27 00:04:47]
[00:04:47] + Working ...
[00:04:47] 
[00:04:47] *------------------------------*
[00:04:47] Folding@Home Gromacs Core
[00:04:47] Version 1.90 (March 8, 2006)
[00:04:47] 
[00:04:47] Preparing to commence simulation
[00:04:47] - Looking at optimizations...
[00:04:47] - Created dyn
[00:04:47] - Files status OK
[00:04:48] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[00:04:48] - Starting from initial work packet
[00:04:48] 
[00:04:48] Project: 6503 (Run 15, Clone 513, Gen 96)
[00:04:48] 
[00:04:48] Assembly optimizations on if available.
[00:04:48] Entering M.D.
[00:04:54] Protein: TR462_B_16 in water
[00:04:54] 
[00:04:54] Writing local files
[00:04:54] Extra SSE boost OK.
[00:04:54] Writing local files
[00:04:55] Completed 0 out of 250000 steps  (0%)
[00:11:59] Writing local files
[00:11:59] Completed 2500 out of 250000 steps  (1%)
[00:19:10] Writing local files
.......................................................................................................................
[03:27:18] Completed 75000 out of 250000 steps  (30%)
[03:34:01] Writing local files
[03:34:01] Completed 77500 out of 250000 steps  (31%)
[03:37:07] CoreStatus = 0 (0)
[03:37:07] Client-core communications error: ERROR 0x0
[03:37:07] - Attempting to download new core...
[03:37:07] + Downloading new core: FahCore_78.exe
[03:37:08] + 10240 bytes downloaded
.......................................................................................
[03:37:11] + 1134407 bytes downloaded
[03:37:11] Verifying core Core_78.fah...
[03:37:11] Signature is VALID
[03:37:11] 
[03:37:11] Trying to unzip core FahCore_78.exe
[03:37:11] Decompressed FahCore_78.exe (3435296 bytes) successfully
[03:37:11] + Core successfully engaged
[03:37:23] Deleting current work unit & continuing...
[03:37:55] - Read packet limit of 540015616... Set to 524286976.


[03:37:58] + Attempting to send results
[03:38:19] - Couldn't send HTTP request to server
[03:38:19] + Could not connect to Work Server (results)
[03:38:19]     (171.67.108.17:8080)
[03:38:19]   Could not transmit unit 06 to Collection server; keeping in queue.
[03:38:19] - Preparing to get new work unit...
[03:38:19] + Attempting to get work packet
[03:38:19] - Connecting to assignment server
[03:38:20] - Successful: assigned to (171.64.65.62).
[03:38:20] + News From Folding@Home: Welcome to Folding@Home
[03:38:20] Loaded queue successfully.
[03:38:22] + Closed connections
[03:38:27] 
[03:38:27] + Processing work unit
[03:38:27] Core required: FahCore_78.exe
[03:38:27] Core found.
[03:38:27] Working on Unit 01 [April 27 03:38:27]
[03:38:27] + Working ...
[03:38:27] 
[03:38:27] *------------------------------*
[03:38:27] Folding@Home Gromacs Core
[03:38:27] Version 1.90 (March 8, 2006)
[03:38:27] 
[03:38:27] Preparing to commence simulation
[03:38:27] - Looking at optimizations...
[03:38:27] - Created dyn
[03:38:27] - Files status OK
[03:38:28] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[03:38:28] - Starting from initial work packet
[03:38:28] 
[03:38:28] Project: 6503 (Run 15, Clone 513, Gen 96)
[03:38:28] 
[03:38:28] Assembly optimizations on if available.
[03:38:28] Entering M.D.
[03:38:34] Protein: TR462_B_16 in water
[03:38:34] 
[03:38:34] Writing local files
[03:38:34] Extra SSE boost OK.
[03:38:34] Writing local files
[03:38:34] Completed 0 out of 250000 steps  (0%)
[03:45:24] Writing local files
[03:45:24] Completed 2500 out of 250000 steps  (1%)
[03:56:35] Writing local files
......................................................................................................................
[07:05:52] Completed 75000 out of 250000 steps  (30%)
[07:12:34] Writing local files
[07:12:34] Completed 77500 out of 250000 steps  (31%)
[07:15:40] CoreStatus = 0 (0)
[07:15:40] Client-core communications error: ERROR 0x0
[07:15:40] Deleting current work unit & continuing...
[07:16:14] - Read packet limit of 540015616... Set to 524286976.


[07:16:17] + Attempting to send results
[07:16:38] - Couldn't send HTTP request to server
[07:16:38] + Could not connect to Work Server (results)
[07:16:38]     (171.67.108.17:8080)
[07:16:38]   Could not transmit unit 06 to Collection server; keeping in queue.
[07:16:38] - Preparing to get new work unit...
[07:16:38] + Attempting to get work packet
[07:16:38] - Connecting to assignment server
[07:16:39] - Successful: assigned to (171.64.65.62).
[07:16:39] + News From Folding@Home: Welcome to Folding@Home
[07:16:39] Loaded queue successfully.
[07:16:41] + Closed connections
[07:16:46] 
[07:16:46] + Processing work unit
[07:16:46] Core required: FahCore_78.exe
[07:16:46] Core found.
[07:16:46] Working on Unit 02 [April 27 07:16:46]
[07:16:46] + Working ...
[07:16:46] 
[07:16:46] *------------------------------*
[07:16:46] Folding@Home Gromacs Core
[07:16:46] Version 1.90 (March 8, 2006)
[07:16:46] 
[07:16:46] Preparing to commence simulation
[07:16:46] - Looking at optimizations...
[07:16:46] - Created dyn
[07:16:46] - Files status OK
[07:16:46] - Expanded 521227 -> 2537133 (decompressed 486.7 percent)
[07:16:46] - Starting from initial work packet
[07:16:46] 
[07:16:46] Project: 6503 (Run 15, Clone 513, Gen 96)
[07:16:46] 
[07:16:46] Assembly optimizations on if available.
[07:16:46] Entering M.D.
[07:16:52] Protein: TR462_B_16 in water
[07:16:52] 
[07:16:52] Writing local files
[07:16:52] Extra SSE boost OK.
[07:16:52] Writing local files
[07:16:52] Completed 0 out of 250000 steps  (0%)
[07:23:34] Writing local files
[07:23:34] Completed 2500 out of 250000 steps  (1%)
[07:30:17] Writing local files
......................................................................................................................
[10:38:21] Completed 75000 out of 250000 steps  (30%)
[10:45:05] Writing local files
[10:45:05] Completed 77500 out of 250000 steps  (31%)
[10:48:11] CoreStatus = 0 (0)
[10:48:11] Client-core communications error: ERROR 0x0
[10:48:11] Too many errors during run. Purging queue.
[10:48:47] 
[10:48:47] + Processing work unit
[10:48:47] Core required: FahCore_78.exe
[10:48:47] Core found.
[10:48:47] Working on Unit 02 [April 27 10:48:47]
[10:48:47] + Working ...
[10:48:47] 
[10:48:47] *------------------------------*
[10:48:47] Folding@Home Gromacs Core
[10:48:47] Version 1.90 (March 8, 2006)
[10:48:47] 
[10:48:47] Preparing to commence simulation
[10:48:47] - Looking at optimizations...
[10:48:47] - Created dyn
[10:48:47] - Files status OK
[10:48:47] 
[10:48:47] Folding@home Core Shutdown: MISSING_WORK_FILES
[10:48:47] CoreStatus = 74 (116)
[10:48:47] The core could not find the work files specified. Removing from queue
[10:48:47] Deleting current work unit & continuing...
[10:48:47] - Preparing to get new work unit...
[10:48:47] + Attempting to get work packet
[10:48:47] - Connecting to assignment server
[10:48:47] - Successful: assigned to (171.64.65.62).
[10:48:47] + News From Folding@Home: Welcome to Folding@Home
[10:48:48] Loaded queue successfully.
[10:48:48] - Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[10:49:06] + Attempting to get work packet
[10:49:06] - Connecting to assignment server
[10:49:06] - Successful: assigned to (171.64.65.62).
[10:49:06] + News From Folding@Home: Welcome to Folding@Home
[10:49:06] Loaded queue successfully.
[10:49:08] + Closed connections
[10:49:13] 
[10:49:13] + Processing work unit
[10:49:13] Core required: FahCore_78.exe
[10:49:13] Core found.
[10:49:13] Working on Unit 03 [April 27 10:49:13]
[10:49:13] + Working ...
[10:49:13] 
[10:49:13] *------------------------------*
[10:49:13] Folding@Home Gromacs Core
[10:49:13] Version 1.90 (March 8, 2006)
[10:49:13] 
[10:49:13] Preparing to commence simulation
[10:49:13] - Looking at optimizations...
[10:49:13] - Created dyn
[10:49:13] - Files status OK
[10:49:14] - Expanded 592916 -> 2967617 (decompressed 500.5 percent)
[10:49:14] - Starting from initial work packet
[10:49:14] 
[10:49:14] Project: 6541 (Run 2, Clone 44, Gen 63)
[10:49:14] 
[10:49:14] Assembly optimizations on if available.
[10:49:14] Entering M.D.
[10:49:20] Protein: ubiq_3 in water
[10:49:20] 
[10:49:20] Writing local files
[10:49:20] Extra SSE boost OK.
[10:49:20] Writing local files
[10:49:20] Completed 0 out of 250000 steps  (0%)
[10:57:08] Writing local files
[10:57:08] Completed 2500 out of 250000 steps  (1%)

[bruce]

After 11 runs, Project: 6503 (Run 15, Clone 513, Gen 96) aborted again and deleted everything in the queue. As a result, the completed results for Project: 6316 (Run 698, Clone 1, Gen 141) are irretrievably gone. Edited logfile is shown below.

Correct.

[11:29:57] Working on Unit 06 [April 21 11:29:57]
[11:29:57] Project: 6316 (Run 698, Clone 1, Gen 141) <---- Unit 06 was completed but failed to upload many, many times because server 171.64.65.111 was off-line. It was brought back on-line about Apr 27 15:50.
[11:05:50] Folding@home Core Shutdown: FINISHED_UNIT
[11:06:08] CoreStatus = 64 (100)

[11:07:03] Working on Unit 07 [April 23 11:07:03]
[11:07:03] Project: 6526 (Run 19, Clone 33, Gen 99)
[05:02:09] Folding@home Core Shutdown: FINISHED_UNIT
[05:02:32] CoreStatus = 64 (100)

[05:03:29] Working on Unit 08 [April 24 05:03:29]
[05:03:29] Project: 6500 (Run 14, Clone 147, Gen 71)
[13:47:34] Folding@home Core Shutdown: FINISHED_UNIT
[13:47:47] CoreStatus = 64 (100)

[13:48:43] Working on Unit 09 [April 24 13:48:43]
[13:48:44] Project: 6521 (Run 5, Clone 3, Gen 39)
[04:41:14] Folding@home Core Shutdown: FINISHED_UNIT
[04:41:34] CoreStatus = 64 (100)

[04:42:31] Working on Unit 00 [April 25 04:42:31]
[04:42:32] Project: 6507 (Run 1, Clone 232, Gen 83)
[19:11:05] Folding@home Core Shutdown: FINISHED_UNIT
[19:11:26] CoreStatus = 64 (100)

[19:12:22] Working on Unit 01 [April 25 19:12:22]
[19:12:22] Project: 6503 (Run 15, Clone 513, Gen 96) <--- P6503 R15 C512 G96 was reprocessed 10 more times (below) but was always purged.
[22:53:42] Client-core communications error: ERROR 0x0
[22:53:42] Deleting current work unit & continuing...

[22:54:48] Working on Unit 02 [April 25 22:54:48]
[22:54:49] Project: 6503 (Run 15, Clone 513, Gen 96)
[02:32:05] Client-core communications error: ERROR 0x0
[02:32:05] Deleting current work unit & continuing...

[02:33:12] Working on Unit 03 [April 26 02:33:12]
[02:33:12] Project: 6503 (Run 15, Clone 513, Gen 96)
[06:04:05] CoreStatus = 0 (0)
[06:04:05] Client-core communications error: ERROR 0x0
[06:04:20] Deleting current work unit & continuing...

[06:05:27] Working on Unit 04 [April 26 06:05:27]
[06:05:27] Project: 6503 (Run 15, Clone 513, Gen 96)
[09:35:55] Client-core communications error: ERROR 0x0
[09:35:55] Deleting current work unit & continuing...

[09:37:01] Working on Unit 05 [April 26 09:37:01]
[09:37:02] Project: 6503 (Run 15, Clone 513, Gen 96)
[13:08:03] Client-core communications error: ERROR 0x0
[13:08:03] Deleting current work unit & continuing...

[13:09:09] Working on Unit 07 [April 26 13:09:09]
[13:09:10] Project: 6503 (Run 15, Clone 513, Gen 96)
[16:46:41] Client-core communications error: ERROR 0x0
[16:46:56] Deleting current work unit & continuing...

[16:48:01] Working on Unit 08 [April 26 16:48:01]
[16:48:01] Project: 6503 (Run 15, Clone 513, Gen 96)
[20:19:08] Client-core communications error: ERROR 0x0
[20:19:08] Deleting current work unit & continuing...

[20:20:13] Working on Unit 09 [April 26 20:20:13]
[20:20:13] Project: 6503 (Run 15, Clone 513, Gen 96)
[00:03:41] Client-core communications error: ERROR 0x0
[00:03:41] Deleting current work unit & continuing...

[00:04:47] Working on Unit 00 [April 27 00:04:47]
[00:04:48] Project: 6503 (Run 15, Clone 513, Gen 96)
[03:37:07] Client-core communications error: ERROR 0x0
[03:37:23] Deleting current work unit & continuing...

[03:38:27] Working on Unit 01 [April 27 03:38:27]
[03:38:28] Project: 6503 (Run 15, Clone 513, Gen 96)
[07:15:40] Client-core communications error: ERROR 0x0
[07:15:40] Deleting current work unit & continuing...

[07:16:46] Working on Unit 02 [April 27 07:16:46]
[07:16:46] Project: 6503 (Run 15, Clone 513, Gen 96)
[10:48:11] Client-core communications error: ERROR 0x0
[10:48:11] Too many errors during run. Purging queue. <-- To get rid of this repeated failures of P6503 R15 C512 G96, the queue was purged which unfortunately also discarded P6316 R698 C1 G141 (Unit 06).
[10:48:47] Working on Unit 02 [April 27 10:48:47]
[10:48:47] Folding@home Core Shutdown: MISSING_WORK_FILES
[10:48:47] CoreStatus = 74 (116)
[10:48:47] The core could not find the work files specified. Removing from queue
[10:48:47] Deleting current work unit & continuing...

[10:49:13] Working on Unit 03 [April 27 10:49:13]
[10:49:14] Project: 6541 (Run 2, Clone 44, Gen 63) <--- but the end result was that you're no longer looping at 31% of P6503 R15 C512 G96, which is a good thing.

[djohnston]

Thanks for the annotations, bruce. I was getting a little blurry after editing the logfile.

[PantherX]

There were multiple failures in the WU Database so it has been marked as a bad one:

The WU (P6503,R15,C513,G96) has been reported as a bad WU.