Seriously PG, WU's 5765-5767!!!

Moderators: Site Moderators, FAHC Science Team

Mr. Scary
Posts: 35
Joined: Fri Jul 04, 2008 7:13 pm
Hardware configuration: The Rock-XPS630i/QX6850@3.67ghz/OCZ Plat 1066 2x2gb/(2)8800GT AlphaDogs/(2)10krpm Raptors Raid0&(2)WD HDD 500gb
Nekid-CoolerMaster CM690/MSI-P6N Diamond/Q6600@3.0ghz/Samsung 2x2gb 800mhz/(2)9800GT's/TX2 HSF/Corsair TX850W PSU/(2)WD 160gb HDD's Raid 0, (1)500gb WD & (1)1.5tb WD HDD
Bare Nekid-MSI-P6N Diamond/E7200@3.2ghz/OCZ ReaperX1000mhz 2x2gb/(2)8800GT's/Corsair TX750W PSU/160gb WD HDD
Buck Nekid-Xion XON-303/Dell'd 650iMobo/Q6600@3.15ghz/Naya 4x1gb 667mhz/(2)8800GT's SLI/750W PSU/320gb WD HDD

Re: Seriously PG, WU's 5765-5767!!!

Post by Mr. Scary »

Will do on the cpu oc as well as run occt, don't really use furmark. probably later this afternoon as it time to stop fiddlin' unfortunately with this rig and do some real work LOL!!!
I'd luv to babysit, but, you gotta do what you gotta do,,,,,yada,yada,yada,etc......
hence the reason i luv it when it gets the other wu's, puts out and is on autopilot no probs!

tx again, catch ya later

M$
Mr. Scary
Posts: 35
Joined: Fri Jul 04, 2008 7:13 pm
Hardware configuration: The Rock-XPS630i/QX6850@3.67ghz/OCZ Plat 1066 2x2gb/(2)8800GT AlphaDogs/(2)10krpm Raptors Raid0&(2)WD HDD 500gb
Nekid-CoolerMaster CM690/MSI-P6N Diamond/Q6600@3.0ghz/Samsung 2x2gb 800mhz/(2)9800GT's/TX2 HSF/Corsair TX850W PSU/(2)WD 160gb HDD's Raid 0, (1)500gb WD & (1)1.5tb WD HDD
Bare Nekid-MSI-P6N Diamond/E7200@3.2ghz/OCZ ReaperX1000mhz 2x2gb/(2)8800GT's/Corsair TX750W PSU/160gb WD HDD
Buck Nekid-Xion XON-303/Dell'd 650iMobo/Q6600@3.15ghz/Naya 4x1gb 667mhz/(2)8800GT's SLI/750W PSU/320gb WD HDD

Re: Seriously PG, WU's 5765-5767!!!

Post by Mr. Scary »

Yo!,,,,,anyone or anything else???

M$
Fahrenheit451
Posts: 90
Joined: Sun Sep 19, 2010 9:25 am
Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz

System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB
Location: Bonn, Germany

Re: Seriously PG, WU's 5765-5767!!!

Post by Fahrenheit451 »

Hi,
I fold since December 2008 and have the same issue with these three projects (5765-5767). The latest error occured last night with this project:

Project: 5766 (Run 3, Clone 428, Gen 2160)

I could give you other 5765-5767 project numbers which didn't work but they are too old in my opinion (early 2009). Then I stopped to collect them, because they didn't change and I didn't found any solution at FAH forums. Also I changed GPU client from 6.23 to 6.30r2 this year and made several graphics driver updates since early 2009. My hardware remains unchanged. These are my current system specs:

CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte Technology Co., Ltd. , Modell P35-DS3P
RAM: 2GB
OS: Microsoft Windows Vista Ultimate, 32 bit, Service Pack 2

GPU: NVIDIA GeForce 8800 GTS 512, manufacturer according to gpu-z: XFX Pine Group
Graphics Driver version: 258.96
The card runs on stocks: GPU 650 MHz, Memory 972 Mhz, Shader 1625 MHz

I always run 2 instances of the CPU client (6.23) and one of the GPU client on this PC, but I only have problems with these three GPU projects. Please find below the GPU FAH-Log:

Code: Select all


--- Opening Log file [September 19 00:40:40 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\...\AppData\Roaming\Folding@home-gpu


[00:40:40] - Ask before connecting: No
[00:40:40] - User name: ... (Team 0)
[00:40:40] - User ID: ...
[00:40:40] - Machine ID: 2
[00:40:40] 
[00:40:40] Gpu type=2 species=30.
[00:40:40] Loaded queue successfully.
[00:40:40] Initialization complete
[00:40:40] - Preparing to get new work unit...
[00:40:40] Cleaning up work directory
[00:40:40] + Attempting to get work packet
[00:40:40] Gpu type=2 species=30.
[00:40:40] - Connecting to assignment server
[00:40:41] - Successful: assigned to (171.64.65.61).
[00:40:41] + News From Folding@Home: Welcome to Folding@Home
[00:40:42] Loaded queue successfully.
[00:40:42] Gpu type=2 species=30.
[00:40:43] + Closed connections
[00:40:43] 
[00:40:43] + Processing work unit
[00:40:43] Core required: FahCore_11.exe
[00:40:43] Core found.
[00:40:43] Working on queue slot 02 [September 19 00:40:43 UTC]
[00:40:43] + Working ...
[00:40:44] 
[00:40:44] *------------------------------*
[00:40:44] Folding@Home GPU Core
[00:40:44] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[00:40:44] 
[00:40:44] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[00:40:44] Build host: amoeba
[00:40:44] Board Type: Nvidia
[00:40:44] Core      : 
[00:40:44] Preparing to commence simulation
[00:40:44] - Looking at optimizations...
[00:40:44] DeleteFrameFiles: successfully deleted file=work/wudata_02.ckp
[00:40:44] - Created dyn
[00:40:44] - Files status OK
[00:40:44] - Expanded 73866 -> 383588 (decompressed 519.3 percent)
[00:40:44] Called DecompressByteArray: compressed_data_size=73866 data_size=383588, decompressed_data_size=383588 diff=0
[00:40:44] - Digital signature verified
[00:40:44] 
[00:40:44] Project: 6604 (Run 4, Clone 585, Gen 164)
[00:40:44] 
[00:40:44] Assembly optimizations on if available.
[00:40:44] Entering M.D.
[00:40:50] Tpr hash work/wudata_02.tpr:  879301867 1167907963 2261881002 2211742259 1923081830
[00:40:50] 
[00:40:50] Calling fah_main args: 14 usage=100
[00:40:50] 
[00:40:50] Working on Protein
[00:40:51] Client config found, loading data.
[00:40:52] Starting GUI Server
[00:42:10] Completed 1%
.
.
.
[02:50:24] Completed 100%
[02:50:25] Successful run
[02:50:25] DynamicWrapper: Finished Work Unit: sleep=10000
[02:50:35] Reserved 85108 bytes for xtc file; Cosm status=0
[02:50:35] Allocated 85108 bytes for xtc file
[02:50:35] - Reading up to 85108 from "work/wudata_02.xtc": Read 85108
[02:50:35] Read 85108 bytes from xtc file; available packet space=786345356
[02:50:35] xtc file hash check passed.
[02:50:35] Reserved 25248 25248 786345356 bytes for arc file=<work/wudata_02.trr> Cosm status=0
[02:50:35] Allocated 25248 bytes for arc file
[02:50:35] - Reading up to 25248 from "work/wudata_02.trr": Read 25248
[02:50:35] Read 25248 bytes from arc file; available packet space=786320108
[02:50:35] trr file hash check passed.
[02:50:35] Allocated 560 bytes for edr file
[02:50:35] Read bedfile
[02:50:35] edr file hash check passed.
[02:50:35] Allocated 0 bytes for logfile
[02:50:35] Could not open/read logfile=<work/wudata_02.log>; Cosm status=-1
[02:50:35] GuardedRun: success in DynamicWrapper
[02:50:35] GuardedRun: done
[02:50:35] Run: GuardedRun completed.
[02:50:36] + Opened results file
[02:50:36] - Writing 111428 bytes of core data to disk...
[02:50:36] Done: 110916 -> 110335 (compressed to 99.4 percent)
[02:50:36]   ... Done.
[02:50:36] DeleteFrameFiles: successfully deleted file=work/wudata_02.ckp
[02:50:36] Shutting down core 
[02:50:36] 
[02:50:36] Folding@home Core Shutdown: FINISHED_UNIT
[02:50:38] CoreStatus = 64 (100)
[02:50:38] Sending work to server
[02:50:38] Project: 6604 (Run 4, Clone 585, Gen 164)
[02:50:38] - Read packet limit of 540015616... Set to 524286976.


[02:50:38] + Attempting to send results [September 19 02:50:38 UTC]
[02:50:38] Gpu type=2 species=30.
[02:50:41] + Results successfully sent
[02:50:41] Thank you for your contribution to Folding@Home.
[02:50:41] + Number of Units Completed: 284

[02:50:45] - Preparing to get new work unit...
[02:50:45] Cleaning up work directory
[02:50:45] + Attempting to get work packet
[02:50:45] Gpu type=2 species=30.
[02:50:45] - Connecting to assignment server
[02:50:46] - Successful: assigned to (171.67.108.11).
[02:50:46] + News From Folding@Home: Welcome to Folding@Home
[02:50:46] Loaded queue successfully.
[02:50:46] Gpu type=2 species=30.
[02:50:48] + Closed connections
[02:50:48] 
[02:50:48] + Processing work unit
[02:50:48] Core required: FahCore_11.exe
[02:50:48] Core found.
[02:50:48] Working on queue slot 03 [September 19 02:50:48 UTC]
[02:50:48] + Working ...
[02:50:48] 
[02:50:48] *------------------------------*
[02:50:48] Folding@Home GPU Core
[02:50:48] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[02:50:48] 
[02:50:48] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[02:50:48] Build host: amoeba
[02:50:48] Board Type: Nvidia
[02:50:48] Core      : 
[02:50:48] Preparing to commence simulation
[02:50:48] - Looking at optimizations...
[02:50:48] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[02:50:48] - Created dyn
[02:50:48] - Files status OK
[02:50:48] - Expanded 46684 -> 252912 (decompressed 541.7 percent)
[02:50:48] Called DecompressByteArray: compressed_data_size=46684 data_size=252912, decompressed_data_size=252912 diff=0
[02:50:48] - Digital signature verified
[02:50:48] 
[02:50:48] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:50:48] 
[02:50:48] Assembly optimizations on if available.
[02:50:48] Entering M.D.
[02:50:54] Tpr hash work/wudata_03.tpr:  2001204163 537498054 1670030895 3758944796 888725392
[02:50:54] 
[02:50:54] Calling fah_main args: 14 usage=100
[02:50:54] 
[02:50:54] Working on Protein
[02:50:55] Client config found, loading data.
[02:50:55] Starting GUI Server
[02:50:55] mdrun_gpu returned 
[02:50:55] NANs detected on GPU
[02:50:55] 
[02:50:55] Folding@home Core Shutdown: UNSTABLE_MACHINE
[02:50:59] CoreStatus = 7A (122)
[02:50:59] Sending work to server
[02:50:59] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:50:59] - Read packet limit of 540015616... Set to 524286976.
[02:50:59] - Error: Could not get length of results file work/wuresults_03.dat
[02:50:59] - Error: Could not read unit 03 file. Removing from queue.
[02:50:59] - Preparing to get new work unit...
[02:50:59] Cleaning up work directory
[02:50:59] + Attempting to get work packet
[02:50:59] Gpu type=2 species=30.
[02:50:59] - Connecting to assignment server
[02:50:59] - Successful: assigned to (171.67.108.11).
[02:50:59] + News From Folding@Home: Welcome to Folding@Home
[02:51:00] Loaded queue successfully.
[02:51:00] Gpu type=2 species=30.
[02:51:01] + Closed connections
[02:51:06] 
[02:51:06] + Processing work unit
[02:51:06] Core required: FahCore_11.exe
[02:51:06] Core found.
[02:51:06] Working on queue slot 04 [September 19 02:51:06 UTC]
[02:51:06] + Working ...
[02:51:06] 
[02:51:06] *------------------------------*
[02:51:06] Folding@Home GPU Core
[02:51:06] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[02:51:06] 
[02:51:06] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[02:51:06] Build host: amoeba
[02:51:06] Board Type: Nvidia
[02:51:06] Core      : 
[02:51:06] Preparing to commence simulation
[02:51:06] - Looking at optimizations...
[02:51:06] DeleteFrameFiles: successfully deleted file=work/wudata_04.ckp
[02:51:06] - Created dyn
[02:51:06] - Files status OK
[02:51:06] - Expanded 46684 -> 252912 (decompressed 541.7 percent)
[02:51:06] Called DecompressByteArray: compressed_data_size=46684 data_size=252912, decompressed_data_size=252912 diff=0
[02:51:06] - Digital signature verified
[02:51:06] 
[02:51:06] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:51:06] 
[02:51:06] Assembly optimizations on if available.
[02:51:06] Entering M.D.
[02:51:13] Tpr hash work/wudata_04.tpr:  2001204163 537498054 1670030895 3758944796 888725392
[02:51:13] 
[02:51:13] Calling fah_main args: 14 usage=100
[02:51:13] 
[02:51:13] Working on Protein
[02:51:13] Client config found, loading data.
[02:51:13] mdrun_gpu returned 
[02:51:13] NANs detected on GPU
[02:51:13] 
[02:51:13] Folding@home Core Shutdown: UNSTABLE_MACHINE
[02:51:17] CoreStatus = 7A (122)
[02:51:17] Sending work to server
[02:51:17] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:51:17] - Read packet limit of 540015616... Set to 524286976.
[02:51:17] - Error: Could not get length of results file work/wuresults_04.dat
[02:51:17] - Error: Could not read unit 04 file. Removing from queue.
[02:51:17] - Preparing to get new work unit...
[02:51:17] Cleaning up work directory
[02:51:17] + Attempting to get work packet
[02:51:17] Gpu type=2 species=30.
[02:51:17] - Connecting to assignment server
[02:51:17] - Successful: assigned to (171.67.108.11).
[02:51:17] + News From Folding@Home: Welcome to Folding@Home
[02:51:18] Loaded queue successfully.
[02:51:18] Gpu type=2 species=30.
[02:51:19] + Closed connections
[02:51:24] 
[02:51:24] + Processing work unit
[02:51:24] Core required: FahCore_11.exe
[02:51:24] Core found.
[02:51:24] Working on queue slot 05 [September 19 02:51:24 UTC]
[02:51:24] + Working ...
[02:51:24] 
[02:51:24] *------------------------------*
[02:51:24] Folding@Home GPU Core
[02:51:24] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[02:51:24] 
[02:51:24] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[02:51:24] Build host: amoeba
[02:51:24] Board Type: Nvidia
[02:51:24] Core      : 
[02:51:24] Preparing to commence simulation
[02:51:24] - Looking at optimizations...
[02:51:24] DeleteFrameFiles: successfully deleted file=work/wudata_05.ckp
[02:51:24] - Created dyn
[02:51:24] - Files status OK
[02:51:24] - Expanded 46684 -> 252912 (decompressed 541.7 percent)
[02:51:24] Called DecompressByteArray: compressed_data_size=46684 data_size=252912, decompressed_data_size=252912 diff=0
[02:51:24] - Digital signature verified
[02:51:24] 
[02:51:24] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:51:24] 
[02:51:24] Assembly optimizations on if available.
[02:51:24] Entering M.D.
[02:51:30] Tpr hash work/wudata_05.tpr:  2001204163 537498054 1670030895 3758944796 888725392
[02:51:30] 
[02:51:30] Calling fah_main args: 14 usage=100
[02:51:30] 
[02:51:31] Working on Protein
[02:51:32] Client config found, loading data.
[02:51:33] mdrun_gpu returned 
[02:51:33] NANs detected on GPU
[02:51:33] 
[02:51:33] Folding@home Core Shutdown: UNSTABLE_MACHINE
[02:51:37] CoreStatus = 7A (122)
[02:51:37] Sending work to server
[02:51:37] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:51:37] - Read packet limit of 540015616... Set to 524286976.
[02:51:37] - Error: Could not get length of results file work/wuresults_05.dat
[02:51:37] - Error: Could not read unit 05 file. Removing from queue.
[02:51:37] - Preparing to get new work unit...
[02:51:37] Cleaning up work directory
[02:51:37] + Attempting to get work packet
[02:51:37] Gpu type=2 species=30.
[02:51:37] - Connecting to assignment server
[02:51:38] - Successful: assigned to (171.67.108.11).
[02:51:38] + News From Folding@Home: Welcome to Folding@Home
[02:51:38] Loaded queue successfully.
[02:51:38] Gpu type=2 species=30.
[02:51:39] + Closed connections
[02:51:44] 
[02:51:44] + Processing work unit
[02:51:44] Core required: FahCore_11.exe
[02:51:44] Core found.
[02:51:44] Working on queue slot 06 [September 19 02:51:44 UTC]
[02:51:44] + Working ...
[02:51:44] 
[02:51:44] *------------------------------*
[02:51:44] Folding@Home GPU Core
[02:51:44] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[02:51:44] 
[02:51:44] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[02:51:44] Build host: amoeba
[02:51:44] Board Type: Nvidia
[02:51:44] Core      : 
[02:51:44] Preparing to commence simulation
[02:51:44] - Looking at optimizations...
[02:51:44] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp
[02:51:44] - Created dyn
[02:51:44] - Files status OK
[02:51:44] - Expanded 46684 -> 252912 (decompressed 541.7 percent)
[02:51:44] Called DecompressByteArray: compressed_data_size=46684 data_size=252912, decompressed_data_size=252912 diff=0
[02:51:44] - Digital signature verified
[02:51:44] 
[02:51:44] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:51:44] 
[02:51:44] Assembly optimizations on if available.
[02:51:44] Entering M.D.
[02:51:51] Tpr hash work/wudata_06.tpr:  2001204163 537498054 1670030895 3758944796 888725392
[02:51:51] 
[02:51:51] Calling fah_main args: 14 usage=100
[02:51:51] 
[02:51:51] Working on Protein
[02:51:52] Client config found, loading data.
[02:51:52] mdrun_gpu returned 
[02:51:52] NANs detected on GPU
[02:51:52] 
[02:51:52] Folding@home Core Shutdown: UNSTABLE_MACHINE
[02:51:57] CoreStatus = 7A (122)
[02:51:57] Sending work to server
[02:51:57] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:51:57] - Read packet limit of 540015616... Set to 524286976.
[02:51:57] - Error: Could not get length of results file work/wuresults_06.dat
[02:51:57] - Error: Could not read unit 06 file. Removing from queue.
[02:51:57] - Preparing to get new work unit...
[02:51:57] Cleaning up work directory
[02:51:57] + Attempting to get work packet
[02:51:57] Gpu type=2 species=30.
[02:51:57] - Connecting to assignment server
[02:51:58] - Successful: assigned to (171.67.108.11).
[02:51:58] + News From Folding@Home: Welcome to Folding@Home
[02:51:58] Loaded queue successfully.
[02:51:58] Gpu type=2 species=30.
[02:51:59] + Closed connections
[02:52:04] 
[02:52:04] + Processing work unit
[02:52:04] Core required: FahCore_11.exe
[02:52:04] Core found.
[02:52:04] Working on queue slot 07 [September 19 02:52:04 UTC]
[02:52:04] + Working ...
[02:52:04] 
[02:52:04] *------------------------------*
[02:52:04] Folding@Home GPU Core
[02:52:04] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[02:52:04] 
[02:52:04] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[02:52:04] Build host: amoeba
[02:52:04] Board Type: Nvidia
[02:52:04] Core      : 
[02:52:04] Preparing to commence simulation
[02:52:04] - Looking at optimizations...
[02:52:04] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[02:52:04] - Created dyn
[02:52:04] - Files status OK
[02:52:04] - Expanded 46684 -> 252912 (decompressed 541.7 percent)
[02:52:04] Called DecompressByteArray: compressed_data_size=46684 data_size=252912, decompressed_data_size=252912 diff=0
[02:52:04] - Digital signature verified
[02:52:04] 
[02:52:04] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:52:04] 
[02:52:04] Assembly optimizations on if available.
[02:52:04] Entering M.D.
[02:52:11] Tpr hash work/wudata_07.tpr:  2001204163 537498054 1670030895 3758944796 888725392
[02:52:11] 
[02:52:11] Calling fah_main args: 14 usage=100
[02:52:11] 
[02:52:11] Working on Protein
[02:52:12] Client config found, loading data.
[02:52:12] mdrun_gpu returned 
[02:52:12] NANs detected on GPU
[02:52:12] 
[02:52:12] Folding@home Core Shutdown: UNSTABLE_MACHINE
[02:52:15] CoreStatus = 7A (122)
[02:52:15] Sending work to server
[02:52:15] Project: 5766 (Run 3, Clone 428, Gen 2160)
[02:52:15] - Read packet limit of 540015616... Set to 524286976.
[02:52:15] - Error: Could not get length of results file work/wuresults_07.dat
[02:52:15] - Error: Could not read unit 07 file. Removing from queue.
[02:52:15] EUE limit exceeded. Pausing 24 hours.
[06:40:40] + Working...

Folding@Home Client Shutdown.

Therefore I would be very happy if you could provide a solution to exclude such non-working WU's. I understand, that you don't want to integrate such a function in the client due to misuse. Is it possible to create a server-side blacklist per user with his non-working WU's so that if a user has a continuous problem with the same WU you send him only other projects?

Kind regards,
Fahrenheit451
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Seriously PG, WU's 5765-5767!!!

Post by PantherX »

Welcome to the F@H Forum Fahrenheit451,

Since you are using GPU3 BETA Client, I would suggest that you use the -advmethods flag to get GPU3 WUs which are in late BETA Stage. However, there is a known issue that; if you are using 8800 Series GPU or 9800 series GPU, you may encounter bugs. The Development Team is aware of it and are working on a fix: <Click>. Some folders can fold GPU3 WUs on 8800 Series GPU while other can't. I suggest that you try this and if it manages to fold the WUs, you can keep the -advmethods flag.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Fahrenheit451
Posts: 90
Joined: Sun Sep 19, 2010 9:25 am
Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz

System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB
Location: Bonn, Germany

Re: Seriously PG, WU's 5765-5767!!!

Post by Fahrenheit451 »

Dear PantherX,
Thx for the quick reply. I will test the -advmethods flag. Normally I run the clients always in standard mode without any flags, except the setup of the client to request larger work units.
Please note that I don't have any other issues neither with the client nor other projects. When I changed the GPU client from 6.23 to 6.30r2 in mid-July, I expected that these three projects (5765-5767) will work finally. But they continued to fail :-(
All Core 15 projects (projects 1xxxxx) works fine, and also all other Core 11 projects.
Fahrenheit451
Posts: 90
Joined: Sun Sep 19, 2010 9:25 am
Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz

System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB
Location: Bonn, Germany

Re: Seriously PG, WU's 5765-5767!!!

Post by Fahrenheit451 »

As from PantherX suggested I run my GPU client since September 19 with the -advmethods flag. The client started to download and work on the beta WU's (project numbers 11xxx) and I don't experienced any failures until yesterday. Then the following projects stopped again with "NANs detected on GPU":

[06:42:38] Project: 5767 (Run 14, Clone 99, Gen 445)
[21:59:12] Project: 5766 (Run 13, Clone 367, Gen 300)

Please find attached the F@H-Log.

Code: Select all


--- Opening Log file [October 6 22:15:54 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\USER NAME\AppData\Roaming\Folding@home-gpu
Arguments: -advmethods 

[22:15:54] - Ask before connecting: No
[22:15:54] - User name: 
[22:15:54] - User ID: 
[22:15:54] - Machine ID: 2
[22:15:54] 
[22:15:54] Gpu type=2 species=30.
[22:15:54] Loaded queue successfully.
[22:15:54] Initialization complete
[22:15:54] - Preparing to get new work unit...
[22:15:54] Cleaning up work directory
[22:15:54] + Attempting to get work packet
[22:15:54] Gpu type=2 species=30.
[22:15:54] - Connecting to assignment server
[22:15:56] - Successful: assigned to (171.67.108.21).
[22:15:56] + News From Folding@Home: Welcome to Folding@Home
[22:15:56] Loaded queue successfully.
[22:15:56] Gpu type=2 species=30.
[22:15:57] + Closed connections
[22:15:57] 
[22:15:57] + Processing work unit
[22:15:57] Core required: FahCore_11.exe
[22:15:57] Core found.
[22:15:57] Working on queue slot 01 [October 6 22:15:57 UTC]
[22:15:57] + Working ...
[22:15:58] 
[22:15:58] *------------------------------*
[22:15:58] Folding@Home GPU Core
[22:15:58] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:15:58] 
[22:15:58] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:15:58] Build host: amoeba
[22:15:58] Board Type: Nvidia
[22:15:58] Core      : 
[22:15:58] Preparing to commence simulation
[22:15:58] - Looking at optimizations...
[22:15:58] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[22:15:58] - Created dyn
[22:15:58] - Files status OK
[22:15:58] - Expanded 65405 -> 344335 (decompressed 526.4 percent)
[22:15:58] Called DecompressByteArray: compressed_data_size=65405 data_size=344335, decompressed_data_size=344335 diff=0
[22:15:58] - Digital signature verified
[22:15:58] 
[22:15:58] Project: 5782 (Run 1, Clone 15, Gen 312)
[22:15:58] 
[22:15:58] Assembly optimizations on if available.
[22:15:58] Entering M.D.
[22:16:04] Tpr hash work/wudata_01.tpr:  888226 3240771593 2467380657 2526485858 2783857363
[22:16:04] 
[22:16:04] Calling fah_main args: 14 usage=100
[22:16:04] 
[22:16:05] Working on Giving Russians Opium May Alter Current Situation
[22:16:06] Client config found, loading data.
[22:16:07] Starting GUI Server
[22:18:15] Completed 1%
...
[01:50:24] Completed 100%
[01:50:25] Successful run
[01:50:25] DynamicWrapper: Finished Work Unit: sleep=10000
[01:50:35] Reserved 145944 bytes for xtc file; Cosm status=0
[01:50:35] Allocated 145944 bytes for xtc file
[01:50:35] - Reading up to 145944 from "work/wudata_01.xtc": Read 145944
[01:50:35] Read 145944 bytes from xtc file; available packet space=786284520
[01:50:35] xtc file hash check passed.
[01:50:35] Reserved 22272 22272 786284520 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[01:50:35] Allocated 22272 bytes for arc file
[01:50:35] - Reading up to 22272 from "work/wudata_01.trr": Read 22272
[01:50:35] Read 22272 bytes from arc file; available packet space=786262248
[01:50:35] trr file hash check passed.
[01:50:35] Allocated 560 bytes for edr file
[01:50:35] Read bedfile
[01:50:35] edr file hash check passed.
[01:50:35] Logfile not read.
[01:50:35] GuardedRun: success in DynamicWrapper
[01:50:35] GuardedRun: done
[01:50:35] Run: GuardedRun completed.
[01:50:38] + Opened results file
[01:50:38] - Writing 169288 bytes of core data to disk...
[01:50:38] Done: 168776 -> 167292 (compressed to 99.1 percent)
[01:50:38]   ... Done.
[01:50:40] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[01:50:44] Shutting down core 
[01:50:44] 
[01:50:44] Folding@home Core Shutdown: FINISHED_UNIT
[01:50:49] CoreStatus = 64 (100)
[01:50:49] Sending work to server
[01:50:49] Project: 5782 (Run 1, Clone 15, Gen 312)
[01:50:49] - Read packet limit of 540015616... Set to 524286976.

[Log entries of successfull finished WU's removed]

[04:01:03] Gpu type=2 species=30.
[04:01:05] + Results successfully sent
[04:01:05] Thank you for your contribution to Folding@Home.
[04:01:05] + Number of Units Completed: 334

[04:01:09] - Preparing to get new work unit...
[04:01:09] Cleaning up work directory
[04:01:09] + Attempting to get work packet
[04:01:09] Gpu type=2 species=30.
[04:01:09] - Connecting to assignment server
[04:01:11] - Successful: assigned to (171.64.65.61).
[04:01:11] + News From Folding@Home: Welcome to Folding@Home
[04:01:11] Loaded queue successfully.
[04:01:11] Gpu type=2 species=30.
[04:01:12] + Closed connections
[04:01:12] 
[04:01:12] + Processing work unit
[04:01:12] Core required: FahCore_11.exe
[04:01:12] Core found.
[04:01:12] Working on queue slot 03 [October 7 04:01:12 UTC]
[04:01:12] + Working ...
[04:01:13] 
[04:01:13] *------------------------------*
[04:01:13] Folding@Home GPU Core
[04:01:13] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[04:01:13] 
[04:01:13] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[04:01:13] Build host: amoeba
[04:01:13] Board Type: Nvidia
[04:01:13] Core      : 
[04:01:13] Preparing to commence simulation
[04:01:13] - Looking at optimizations...
[04:01:13] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[04:01:13] - Created dyn
[04:01:13] - Files status OK
[04:01:13] - Expanded 62957 -> 337552 (decompressed 536.1 percent)
[04:01:13] Called DecompressByteArray: compressed_data_size=62957 data_size=337552, decompressed_data_size=337552 diff=0
[04:01:13] - Digital signature verified
[04:01:13] 
[04:01:13] Project: 10516 (Run 4, Clone 593, Gen 73)
[04:01:13] 
[04:01:13] Assembly optimizations on if available.
[04:01:13] Entering M.D.
[04:01:19] Tpr hash work/wudata_03.tpr:  3897510428 411563858 736447234 3658458890 1716881359
[04:01:19] 
[04:01:19] Calling fah_main args: 14 usage=100
[04:01:19] 
[04:01:19] Working on Protein
[04:01:22] Client config found, loading data.
[04:01:22] Starting GUI Server
[04:02:58] Completed 1%
...
[06:41:52] Completed 100%
[06:41:52] Successful run
[06:41:52] DynamicWrapper: Finished Work Unit: sleep=10000
[06:42:02] Reserved 110112 bytes for xtc file; Cosm status=0
[06:42:02] Allocated 110112 bytes for xtc file
[06:42:02] - Reading up to 110112 from "work/wudata_03.xtc": Read 110112
[06:42:02] Read 110112 bytes from xtc file; available packet space=786320352
[06:42:02] xtc file hash check passed.
[06:42:02] Reserved 21960 21960 786320352 bytes for arc file=<work/wudata_03.trr> Cosm status=0
[06:42:02] Allocated 21960 bytes for arc file
[06:42:02] - Reading up to 21960 from "work/wudata_03.trr": Read 21960
[06:42:02] Read 21960 bytes from arc file; available packet space=786298392
[06:42:02] trr file hash check passed.
[06:42:02] Allocated 560 bytes for edr file
[06:42:02] Read bedfile
[06:42:02] edr file hash check passed.
[06:42:02] Allocated 10909 bytes for logfile
[06:42:02] Read logfile
[06:42:02] GuardedRun: success in DynamicWrapper
[06:42:02] GuardedRun: done
[06:42:02] Run: GuardedRun completed.
[06:42:05] + Opened results file
[06:42:05] - Writing 144053 bytes of core data to disk...
[06:42:05] Done: 143541 -> 137067 (compressed to 95.4 percent)
[06:42:05]   ... Done.
[06:42:05] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[06:42:06] Shutting down core 
[06:42:06] 
[06:42:06] Folding@home Core Shutdown: FINISHED_UNIT
[06:42:08] CoreStatus = 64 (100)
[06:42:08] Sending work to server
[06:42:08] Project: 10516 (Run 4, Clone 593, Gen 73)
[06:42:08] - Read packet limit of 540015616... Set to 524286976.


[06:42:08] + Attempting to send results [October 7 06:42:08 UTC]
[06:42:08] Gpu type=2 species=30.
[06:42:11] + Results successfully sent
[06:42:11] Thank you for your contribution to Folding@Home.
[06:42:11] + Number of Units Completed: 335

[06:42:15] - Preparing to get new work unit...
[06:42:15] Cleaning up work directory
[06:42:15] + Attempting to get work packet
[06:42:15] Gpu type=2 species=30.
[06:42:15] - Connecting to assignment server
[06:42:17] - Successful: assigned to (171.67.108.11).
[06:42:17] + News From Folding@Home: Welcome to Folding@Home
[06:42:17] Loaded queue successfully.
[06:42:17] Gpu type=2 species=30.
[06:42:18] + Closed connections
[06:42:18] 
[06:42:18] + Processing work unit
[06:42:18] Core required: FahCore_11.exe
[06:42:18] Core found.
[06:42:18] Working on queue slot 04 [October 7 06:42:18 UTC]
[06:42:18] + Working ...
[06:42:18] 
[06:42:18] *------------------------------*
[06:42:18] Folding@Home GPU Core
[06:42:18] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[06:42:18] 
[06:42:18] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[06:42:18] Build host: amoeba
[06:42:18] Board Type: Nvidia
[06:42:18] Core      : 
[06:42:18] Preparing to commence simulation
[06:42:18] - Looking at optimizations...
[06:42:18] DeleteFrameFiles: successfully deleted file=work/wudata_04.ckp
[06:42:18] - Created dyn
[06:42:18] - Files status OK
[06:42:18] - Expanded 46717 -> 252912 (decompressed 541.3 percent)
[06:42:18] Called DecompressByteArray: compressed_data_size=46717 data_size=252912, decompressed_data_size=252912 diff=0
[06:42:18] - Digital signature verified
[06:42:18] 
[06:42:18] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:42:18] 
[06:42:19] Assembly optimizations on if available.
[06:42:19] Entering M.D.
[06:42:25] Tpr hash work/wudata_04.tpr:  2057586633 1623166831 2427457535 2824203810 2209666610
[06:42:25] 
[06:42:25] Calling fah_main args: 14 usage=100
[06:42:25] 
[06:42:25] Working on Protein
[06:42:26] Client config found, loading data.
[06:42:26] Starting GUI Server
[06:42:27] mdrun_gpu returned 
[06:42:27] NANs detected on GPU
[06:42:27] 
[06:42:27] Folding@home Core Shutdown: UNSTABLE_MACHINE
[06:42:31] CoreStatus = 7A (122)
[06:42:31] Sending work to server
[06:42:31] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:42:31] - Read packet limit of 540015616... Set to 524286976.
[06:42:31] - Error: Could not get length of results file work/wuresults_04.dat
[06:42:31] - Error: Could not read unit 04 file. Removing from queue.
[06:42:31] - Preparing to get new work unit...
[06:42:31] Cleaning up work directory
[06:42:31] + Attempting to get work packet
[06:42:31] Gpu type=2 species=30.
[06:42:31] - Connecting to assignment server
[06:42:32] - Successful: assigned to (171.67.108.11).
[06:42:32] + News From Folding@Home: Welcome to Folding@Home
[06:42:32] Loaded queue successfully.
[06:42:32] Gpu type=2 species=30.
[06:42:33] + Closed connections
[06:42:38] 
[06:42:38] + Processing work unit
[06:42:38] Core required: FahCore_11.exe
[06:42:38] Core found.
[06:42:38] Working on queue slot 05 [October 7 06:42:38 UTC]
[06:42:38] + Working ...
[06:42:38] 
[06:42:38] *------------------------------*
[06:42:38] Folding@Home GPU Core
[06:42:38] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[06:42:38] 
[06:42:38] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[06:42:38] Build host: amoeba
[06:42:38] Board Type: Nvidia
[06:42:38] Core      : 
[06:42:38] Preparing to commence simulation
[06:42:38] - Looking at optimizations...
[06:42:38] DeleteFrameFiles: successfully deleted file=work/wudata_05.ckp
[06:42:38] - Created dyn
[06:42:38] - Files status OK
[06:42:38] - Expanded 46717 -> 252912 (decompressed 541.3 percent)
[06:42:38] Called DecompressByteArray: compressed_data_size=46717 data_size=252912, decompressed_data_size=252912 diff=0
[06:42:38] - Digital signature verified
[06:42:38] 
[06:42:38] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:42:38] 
[06:42:38] Assembly optimizations on if available.
[06:42:38] Entering M.D.
[06:42:44] Tpr hash work/wudata_05.tpr:  2057586633 1623166831 2427457535 2824203810 2209666610
[06:42:44] 
[06:42:44] Calling fah_main args: 14 usage=100
[06:42:44] 
[06:42:45] Working on Protein
[06:42:46] Client config found, loading data.
[06:42:46] Starting GUI Server
[06:42:46] mdrun_gpu returned 
[06:42:46] NANs detected on GPU
[06:42:46] 
[06:42:46] Folding@home Core Shutdown: UNSTABLE_MACHINE
[06:42:50] CoreStatus = 7A (122)
[06:42:50] Sending work to server
[06:42:50] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:42:50] - Read packet limit of 540015616... Set to 524286976.
[06:42:50] - Error: Could not get length of results file work/wuresults_05.dat
[06:42:50] - Error: Could not read unit 05 file. Removing from queue.
[06:42:50] - Preparing to get new work unit...
[06:42:50] Cleaning up work directory
[06:42:51] + Attempting to get work packet
[06:42:51] Gpu type=2 species=30.
[06:42:51] - Connecting to assignment server
[06:42:51] - Successful: assigned to (171.67.108.11).
[06:42:51] + News From Folding@Home: Welcome to Folding@Home
[06:42:52] Loaded queue successfully.
[06:42:52] Gpu type=2 species=30.
[06:42:53] + Closed connections
[06:42:58] 
[06:42:58] + Processing work unit
[06:42:58] Core required: FahCore_11.exe
[06:42:58] Core found.
[06:42:58] Working on queue slot 06 [October 7 06:42:58 UTC]
[06:42:58] + Working ...
[06:42:58] 
[06:42:58] *------------------------------*
[06:42:58] Folding@Home GPU Core
[06:42:58] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[06:42:58] 
[06:42:58] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[06:42:58] Build host: amoeba
[06:42:58] Board Type: Nvidia
[06:42:58] Core      : 
[06:42:58] Preparing to commence simulation
[06:42:58] - Looking at optimizations...
[06:42:58] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp
[06:42:58] - Created dyn
[06:42:58] - Files status OK
[06:42:58] - Expanded 46717 -> 252912 (decompressed 541.3 percent)
[06:42:58] Called DecompressByteArray: compressed_data_size=46717 data_size=252912, decompressed_data_size=252912 diff=0
[06:42:58] - Digital signature verified
[06:42:58] 
[06:42:58] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:42:58] 
[06:42:58] Assembly optimizations on if available.
[06:42:58] Entering M.D.
[06:43:05] Tpr hash work/wudata_06.tpr:  2057586633 1623166831 2427457535 2824203810 2209666610
[06:43:05] 
[06:43:05] Calling fah_main args: 14 usage=100
[06:43:05] 
[06:43:05] Working on Protein
[06:43:07] Client config found, loading data.
[06:43:07] mdrun_gpu returned 
[06:43:07] NANs detected on GPU
[06:43:07] 
[06:43:07] Folding@home Core Shutdown: UNSTABLE_MACHINE
[06:43:11] CoreStatus = 7A (122)
[06:43:11] Sending work to server
[06:43:11] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:43:11] - Read packet limit of 540015616... Set to 524286976.
[06:43:11] - Error: Could not get length of results file work/wuresults_06.dat
[06:43:11] - Error: Could not read unit 06 file. Removing from queue.
[06:43:11] - Preparing to get new work unit...
[06:43:11] Cleaning up work directory
[06:43:11] + Attempting to get work packet
[06:43:11] Gpu type=2 species=30.
[06:43:11] - Connecting to assignment server
[06:43:12] - Successful: assigned to (171.67.108.11).
[06:43:12] + News From Folding@Home: Welcome to Folding@Home
[06:43:12] Loaded queue successfully.
[06:43:12] Gpu type=2 species=30.
[06:43:14] + Closed connections
[06:43:19] 
[06:43:19] + Processing work unit
[06:43:19] Core required: FahCore_11.exe
[06:43:19] Core found.
[06:43:19] Working on queue slot 07 [October 7 06:43:19 UTC]
[06:43:19] + Working ...
[06:43:19] 
[06:43:19] *------------------------------*
[06:43:19] Folding@Home GPU Core
[06:43:19] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[06:43:19] 
[06:43:19] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[06:43:19] Build host: amoeba
[06:43:19] Board Type: Nvidia
[06:43:19] Core      : 
[06:43:19] Preparing to commence simulation
[06:43:19] - Looking at optimizations...
[06:43:19] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[06:43:19] - Created dyn
[06:43:19] - Files status OK
[06:43:19] - Expanded 46717 -> 252912 (decompressed 541.3 percent)
[06:43:19] Called DecompressByteArray: compressed_data_size=46717 data_size=252912, decompressed_data_size=252912 diff=0
[06:43:19] - Digital signature verified
[06:43:19] 
[06:43:19] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:43:19] 
[06:43:19] Assembly optimizations on if available.
[06:43:19] Entering M.D.
[06:43:25] Tpr hash work/wudata_07.tpr:  2057586633 1623166831 2427457535 2824203810 2209666610
[06:43:25] 
[06:43:25] Calling fah_main args: 14 usage=100
[06:43:25] 
[06:43:25] Working on Protein
[06:43:27] Client config found, loading data.
[06:43:27] Starting GUI Server
[06:43:27] mdrun_gpu returned 
[06:43:27] NANs detected on GPU
[06:43:27] 
[06:43:27] Folding@home Core Shutdown: UNSTABLE_MACHINE
[06:43:31] CoreStatus = 7A (122)
[06:43:31] Sending work to server
[06:43:31] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:43:31] - Read packet limit of 540015616... Set to 524286976.
[06:43:31] - Error: Could not get length of results file work/wuresults_07.dat
[06:43:31] - Error: Could not read unit 07 file. Removing from queue.
[06:43:31] - Preparing to get new work unit...
[06:43:31] Cleaning up work directory
[06:43:31] + Attempting to get work packet
[06:43:31] Gpu type=2 species=30.
[06:43:31] - Connecting to assignment server
[06:43:32] - Successful: assigned to (171.67.108.11).
[06:43:32] + News From Folding@Home: Welcome to Folding@Home
[06:43:32] Loaded queue successfully.
[06:43:32] Gpu type=2 species=30.
[06:43:34] + Closed connections
[06:43:39] 
[06:43:39] + Processing work unit
[06:43:39] Core required: FahCore_11.exe
[06:43:39] Core found.
[06:43:39] Working on queue slot 08 [October 7 06:43:39 UTC]
[06:43:39] + Working ...
[06:43:39] 
[06:43:39] *------------------------------*
[06:43:39] Folding@Home GPU Core
[06:43:39] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[06:43:39] 
[06:43:39] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[06:43:39] Build host: amoeba
[06:43:39] Board Type: Nvidia
[06:43:39] Core      : 
[06:43:39] Preparing to commence simulation
[06:43:39] - Looking at optimizations...
[06:43:39] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[06:43:39] - Created dyn
[06:43:39] - Files status OK
[06:43:39] - Expanded 46717 -> 252912 (decompressed 541.3 percent)
[06:43:39] Called DecompressByteArray: compressed_data_size=46717 data_size=252912, decompressed_data_size=252912 diff=0
[06:43:39] - Digital signature verified
[06:43:39] 
[06:43:39] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:43:39] 
[06:43:39] Assembly optimizations on if available.
[06:43:39] Entering M.D.
[06:43:45] Tpr hash work/wudata_08.tpr:  2057586633 1623166831 2427457535 2824203810 2209666610
[06:43:45] 
[06:43:45] Calling fah_main args: 14 usage=100
[06:43:45] 
[06:43:45] Working on Protein
[06:43:46] Client config found, loading data.
[06:43:46] Starting GUI Server
[06:43:47] mdrun_gpu returned 
[06:43:47] NANs detected on GPU
[06:43:47] 
[06:43:47] Folding@home Core Shutdown: UNSTABLE_MACHINE
[06:43:51] CoreStatus = 7A (122)
[06:43:51] Sending work to server
[06:43:51] Project: 5767 (Run 14, Clone 99, Gen 445)
[06:43:51] - Read packet limit of 540015616... Set to 524286976.
[06:43:51] - Error: Could not get length of results file work/wuresults_08.dat
[06:43:51] - Error: Could not read unit 08 file. Removing from queue.
[06:43:51] EUE limit exceeded. Pausing 24 hours.


--- Opening Log file [October 7 18:21:09 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\USER NAME\AppData\Roaming\Folding@home-gpu
Arguments: -advmethods 

[18:21:09] - Ask before connecting: No
[18:21:09] - User name: 
[18:21:09] - User ID: 
[18:21:09] - Machine ID: 2
[18:21:09] 
[18:21:09] Gpu type=2 species=30.
[18:21:09] Loaded queue successfully.
[18:21:09] Initialization complete
[18:21:09] - Preparing to get new work unit...
[18:21:09] Cleaning up work directory
[18:21:10] + Attempting to get work packet
[18:21:10] Gpu type=2 species=30.
[18:21:10] - Connecting to assignment server
[18:21:11] - Successful: assigned to (171.64.65.61).
[18:21:11] + News From Folding@Home: Welcome to Folding@Home
[18:21:11] Loaded queue successfully.
[18:21:11] Gpu type=2 species=30.
[18:21:14] + Closed connections
[18:21:14] 
[18:21:14] + Processing work unit
[18:21:14] Core required: FahCore_11.exe
[18:21:14] Core found.
[18:21:14] Working on queue slot 09 [October 7 18:21:14 UTC]
[18:21:14] + Working ...
[18:21:14] 
[18:21:14] *------------------------------*
[18:21:14] Folding@Home GPU Core
[18:21:14] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[18:21:14] 
[18:21:14] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[18:21:14] Build host: amoeba
[18:21:14] Board Type: Nvidia
[18:21:14] Core      : 
[18:21:14] Preparing to commence simulation
[18:21:14] - Looking at optimizations...
[18:21:14] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[18:21:14] - Created dyn
[18:21:14] - Files status OK
[18:21:14] - Expanded 73877 -> 383588 (decompressed 519.2 percent)
[18:21:14] Called DecompressByteArray: compressed_data_size=73877 data_size=383588, decompressed_data_size=383588 diff=0
[18:21:14] - Digital signature verified
[18:21:14] 
[18:21:14] Project: 6605 (Run 3, Clone 491, Gen 353)
[18:21:14] 
[18:21:14] Assembly optimizations on if available.
[18:21:14] Entering M.D.
[18:21:20] Tpr hash work/wudata_09.tpr:  250408381 3712058798 499983392 2385850175 846343950
[18:21:20] 
[18:21:20] Calling fah_main args: 14 usage=100
[18:21:20] 
[18:21:22] Working on Protein
[18:21:24] Client config found, loading data.
[18:21:24] Starting GUI Server
[18:22:42] Completed 1%
...
[20:30:31] Completed 100%
[20:30:31] Successful run
[20:30:31] DynamicWrapper: Finished Work Unit: sleep=10000
[20:30:41] Reserved 85804 bytes for xtc file; Cosm status=0
[20:30:41] Allocated 85804 bytes for xtc file
[20:30:41] - Reading up to 85804 from "work/wudata_09.xtc": Read 85804
[20:30:41] Read 85804 bytes from xtc file; available packet space=786344660
[20:30:41] xtc file hash check passed.
[20:30:41] Reserved 25248 25248 786344660 bytes for arc file=<work/wudata_09.trr> Cosm status=0
[20:30:41] Allocated 25248 bytes for arc file
[20:30:41] - Reading up to 25248 from "work/wudata_09.trr": Read 25248
[20:30:41] Read 25248 bytes from arc file; available packet space=786319412
[20:30:41] trr file hash check passed.
[20:30:41] Allocated 560 bytes for edr file
[20:30:41] Read bedfile
[20:30:41] edr file hash check passed.
[20:30:41] Allocated 11369 bytes for logfile
[20:30:41] Read logfile
[20:30:41] GuardedRun: success in DynamicWrapper
[20:30:41] GuardedRun: done
[20:30:41] Run: GuardedRun completed.
[20:30:41] + Opened results file
[20:30:41] - Writing 123493 bytes of core data to disk...
[20:30:41] Done: 122981 -> 116527 (compressed to 94.7 percent)
[20:30:41]   ... Done.
[20:30:41] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[20:30:41] Shutting down core 
[20:30:41] 
[20:30:41] Folding@home Core Shutdown: FINISHED_UNIT
[20:30:46] CoreStatus = 64 (100)
[20:30:46] Sending work to server
[20:30:46] Project: 6605 (Run 3, Clone 491, Gen 353)
[20:30:46] - Read packet limit of 540015616... Set to 524286976.


[20:30:46] + Attempting to send results [October 7 20:30:46 UTC]
[20:30:46] Gpu type=2 species=30.
[20:30:49] + Results successfully sent
[20:30:49] Thank you for your contribution to Folding@Home.
[20:30:49] + Number of Units Completed: 336

[20:30:53] - Preparing to get new work unit...
[20:30:53] Cleaning up work directory
[20:30:53] + Attempting to get work packet
[20:30:53] Gpu type=2 species=30.
[20:30:53] - Connecting to assignment server
[20:30:54] - Successful: assigned to (171.67.108.11).
[20:30:54] + News From Folding@Home: Welcome to Folding@Home
[20:30:54] Loaded queue successfully.
[20:30:54] Gpu type=2 species=30.
[20:30:56] + Closed connections
[20:30:56] 
[20:30:56] + Processing work unit
[20:30:56] Core required: FahCore_11.exe
[20:30:56] Core found.
[20:30:56] Working on queue slot 00 [October 7 20:30:56 UTC]
[20:30:56] + Working ...
[20:30:56] 
[20:30:56] *------------------------------*
[20:30:56] Folding@Home GPU Core
[20:30:56] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[20:30:56] 
[20:30:56] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[20:30:56] Build host: amoeba
[20:30:56] Board Type: Nvidia
[20:30:56] Core      : 
[20:30:56] Preparing to commence simulation
[20:30:56] - Looking at optimizations...
[20:30:56] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[20:30:56] - Created dyn
[20:30:56] - Files status OK
[20:30:56] - Expanded 45374 -> 251112 (decompressed 553.4 percent)
[20:30:56] Called DecompressByteArray: compressed_data_size=45374 data_size=251112, decompressed_data_size=251112 diff=0
[20:30:56] - Digital signature verified
[20:30:56] 
[20:30:56] Project: 5772 (Run 7, Clone 192, Gen 976)
[20:30:56] 
[20:30:56] Assembly optimizations on if available.
[20:30:56] Entering M.D.
[20:31:02] Tpr hash work/wudata_00.tpr:  127693495 30737060 2005227685 2104337979 2636141767
[20:31:02] 
[20:31:02] Calling fah_main args: 14 usage=100
[20:31:02] 
[20:31:03] Working on Protein
[20:31:04] Client config found, loading data.
[20:31:04] Starting GUI Server
[20:31:56] Completed 1%
...
[21:58:44] Completed 100%
[21:58:45] Successful run
[21:58:45] DynamicWrapper: Finished Work Unit: sleep=10000
[21:58:55] Reserved 76152 bytes for xtc file; Cosm status=0
[21:58:55] Allocated 76152 bytes for xtc file
[21:58:55] - Reading up to 76152 from "work/wudata_00.xtc": Read 76152
[21:58:55] Read 76152 bytes from xtc file; available packet space=786354312
[21:58:55] xtc file hash check passed.
[21:58:55] Reserved 15168 15168 786354312 bytes for arc file=<work/wudata_00.trr> Cosm status=0
[21:58:55] Allocated 15168 bytes for arc file
[21:58:55] - Reading up to 15168 from "work/wudata_00.trr": Read 15168
[21:58:55] Read 15168 bytes from arc file; available packet space=786339144
[21:58:55] trr file hash check passed.
[21:58:55] Allocated 560 bytes for edr file
[21:58:55] Read bedfile
[21:58:55] edr file hash check passed.
[21:58:55] Allocated 0 bytes for logfile
[21:58:55] Could not open/read logfile=<work/wudata_00.log>; Cosm status=-1
[21:58:55] GuardedRun: success in DynamicWrapper
[21:58:55] GuardedRun: done
[21:58:55] Run: GuardedRun completed.
[21:59:00] + Opened results file
[21:59:00] - Writing 92392 bytes of core data to disk...
[21:59:00] Done: 91880 -> 90557 (compressed to 98.5 percent)
[21:59:00]   ... Done.
[21:59:00] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[21:59:00] Shutting down core 
[21:59:00] 
[21:59:00] Folding@home Core Shutdown: FINISHED_UNIT
[21:59:03] CoreStatus = 64 (100)
[21:59:03] Sending work to server
[21:59:03] Project: 5772 (Run 7, Clone 192, Gen 976)
[21:59:03] - Read packet limit of 540015616... Set to 524286976.


[21:59:03] + Attempting to send results [October 7 21:59:03 UTC]
[21:59:03] Gpu type=2 species=30.
[21:59:05] + Results successfully sent
[21:59:05] Thank you for your contribution to Folding@Home.
[21:59:05] + Number of Units Completed: 337

[21:59:09] - Preparing to get new work unit...
[21:59:09] Cleaning up work directory
[21:59:09] + Attempting to get work packet
[21:59:09] Gpu type=2 species=30.
[21:59:09] - Connecting to assignment server
[21:59:11] - Successful: assigned to (171.67.108.11).
[21:59:11] + News From Folding@Home: Welcome to Folding@Home
[21:59:11] Loaded queue successfully.
[21:59:11] Gpu type=2 species=30.
[21:59:12] + Closed connections
[21:59:12] 
[21:59:12] + Processing work unit
[21:59:12] Core required: FahCore_11.exe
[21:59:12] Core found.
[21:59:12] Working on queue slot 01 [October 7 21:59:12 UTC]
[21:59:12] + Working ...
[21:59:12] 
[21:59:12] *------------------------------*
[21:59:12] Folding@Home GPU Core
[21:59:12] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[21:59:12] 
[21:59:12] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[21:59:12] Build host: amoeba
[21:59:12] Board Type: Nvidia
[21:59:12] Core      : 
[21:59:12] Preparing to commence simulation
[21:59:12] - Looking at optimizations...
[21:59:12] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[21:59:12] - Created dyn
[21:59:12] - Files status OK
[21:59:12] - Expanded 46718 -> 252912 (decompressed 541.3 percent)
[21:59:12] Called DecompressByteArray: compressed_data_size=46718 data_size=252912, decompressed_data_size=252912 diff=0
[21:59:12] - Digital signature verified
[21:59:12] 
[21:59:12] Project: 5766 (Run 13, Clone 367, Gen 300)
[21:59:12] 
[21:59:12] Assembly optimizations on if available.
[21:59:12] Entering M.D.
[21:59:19] Tpr hash work/wudata_01.tpr:  1754752174 43647761 3008249873 771149795 1937887240
[21:59:19] 
[21:59:19] Calling fah_main args: 14 usage=100
[21:59:19] 
[21:59:19] Working on Protein
[21:59:20] Client config found, loading data.
[21:59:20] Starting GUI Server
[21:59:20] mdrun_gpu returned 
[21:59:20] NANs detected on GPU
[21:59:20] 
[21:59:20] Folding@home Core Shutdown: UNSTABLE_MACHINE
[21:59:25] CoreStatus = 7A (122)
[21:59:25] Sending work to server
[21:59:25] Project: 5766 (Run 13, Clone 367, Gen 300)
[21:59:25] - Read packet limit of 540015616... Set to 524286976.
[21:59:25] - Error: Could not get length of results file work/wuresults_01.dat
[21:59:25] - Error: Could not read unit 01 file. Removing from queue.
[21:59:25] - Preparing to get new work unit...
[21:59:25] Cleaning up work directory
[21:59:25] + Attempting to get work packet
[21:59:25] Gpu type=2 species=30.
[21:59:25] - Connecting to assignment server
[21:59:26] - Successful: assigned to (171.67.108.11).
[21:59:26] + News From Folding@Home: Welcome to Folding@Home
[21:59:26] Loaded queue successfully.
[21:59:26] Gpu type=2 species=30.
[21:59:28] + Closed connections
[21:59:33] 
[21:59:33] + Processing work unit
[21:59:33] Core required: FahCore_11.exe
[21:59:33] Core found.
[21:59:33] Working on queue slot 02 [October 7 21:59:33 UTC]
[21:59:33] + Working ...
[21:59:33] 
[21:59:33] *------------------------------*
[21:59:33] Folding@Home GPU Core
[21:59:33] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[21:59:33] 
[21:59:33] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[21:59:33] Build host: amoeba
[21:59:33] Board Type: Nvidia
[21:59:33] Core      : 
[21:59:33] Preparing to commence simulation
[21:59:33] - Looking at optimizations...
[21:59:33] DeleteFrameFiles: successfully deleted file=work/wudata_02.ckp
[21:59:33] - Created dyn
[21:59:33] - Files status OK
[21:59:33] - Expanded 46718 -> 252912 (decompressed 541.3 percent)
[21:59:33] Called DecompressByteArray: compressed_data_size=46718 data_size=252912, decompressed_data_size=252912 diff=0
[21:59:33] - Digital signature verified
[21:59:33] 
[21:59:33] Project: 5766 (Run 13, Clone 367, Gen 300)
[21:59:33] 
[21:59:33] Assembly optimizations on if available.
[21:59:33] Entering M.D.
[21:59:39] Tpr hash work/wudata_02.tpr:  1754752174 43647761 3008249873 771149795 1937887240
[21:59:39] 
[21:59:39] Calling fah_main args: 14 usage=100
[21:59:39] 
[21:59:39] Working on Protein
[21:59:40] Client config found, loading data.
[21:59:40] mdrun_gpu returned 
[21:59:40] NANs detected on GPU
[21:59:40] 
[21:59:40] Folding@home Core Shutdown: UNSTABLE_MACHINE
[21:59:45] CoreStatus = 7A (122)
[21:59:45] Sending work to server
[21:59:45] Project: 5766 (Run 13, Clone 367, Gen 300)
[21:59:45] - Read packet limit of 540015616... Set to 524286976.
[21:59:45] - Error: Could not get length of results file work/wuresults_02.dat
[21:59:45] - Error: Could not read unit 02 file. Removing from queue.
[21:59:45] - Preparing to get new work unit...
[21:59:45] Cleaning up work directory
[21:59:45] + Attempting to get work packet
[21:59:45] Gpu type=2 species=30.
[21:59:45] - Connecting to assignment server
[21:59:46] - Successful: assigned to (171.67.108.11).
[21:59:46] + News From Folding@Home: Welcome to Folding@Home
[21:59:46] Loaded queue successfully.
[21:59:46] Gpu type=2 species=30.
[21:59:48] + Closed connections
[21:59:53] 
[21:59:53] + Processing work unit
[21:59:53] Core required: FahCore_11.exe
[21:59:53] Core found.
[21:59:53] Working on queue slot 03 [October 7 21:59:53 UTC]
[21:59:53] + Working ...
[21:59:53] 
[21:59:53] *------------------------------*
[21:59:53] Folding@Home GPU Core
[21:59:53] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[21:59:53] 
[21:59:53] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[21:59:53] Build host: amoeba
[21:59:53] Board Type: Nvidia
[21:59:53] Core      : 
[21:59:53] Preparing to commence simulation
[21:59:53] - Looking at optimizations...
[21:59:53] DeleteFrameFiles: successfully deleted file=work/wudata_03.ckp
[21:59:53] - Created dyn
[21:59:53] - Files status OK
[21:59:53] - Expanded 46718 -> 252912 (decompressed 541.3 percent)
[21:59:53] Called DecompressByteArray: compressed_data_size=46718 data_size=252912, decompressed_data_size=252912 diff=0
[21:59:53] - Digital signature verified
[21:59:53] 
[21:59:53] Project: 5766 (Run 13, Clone 367, Gen 300)
[21:59:53] 
[21:59:53] Assembly optimizations on if available.
[21:59:53] Entering M.D.
[21:59:59] Tpr hash work/wudata_03.tpr:  1754752174 43647761 3008249873 771149795 1937887240
[21:59:59] 
[21:59:59] Calling fah_main args: 14 usage=100
[21:59:59] 
[22:00:00] Working on Protein
[22:00:01] Client config found, loading data.
[22:00:01] mdrun_gpu returned 
[22:00:01] NANs detected on GPU
[22:00:01] 
[22:00:01] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:00:06] CoreStatus = 7A (122)
[22:00:06] Sending work to server
[22:00:06] Project: 5766 (Run 13, Clone 367, Gen 300)
[22:00:06] - Read packet limit of 540015616... Set to 524286976.
[22:00:06] - Error: Could not get length of results file work/wuresults_03.dat
[22:00:06] - Error: Could not read unit 03 file. Removing from queue.
[22:00:06] - Preparing to get new work unit...
[22:00:06] Cleaning up work directory
[22:00:06] + Attempting to get work packet
[22:00:06] Gpu type=2 species=30.
[22:00:06] - Connecting to assignment server
[22:00:06] - Successful: assigned to (171.67.108.11).
[22:00:06] + News From Folding@Home: Welcome to Folding@Home
[22:00:07] Loaded queue successfully.
[22:00:07] Gpu type=2 species=30.
[22:00:08] + Closed connections
[22:00:13] 
[22:00:13] + Processing work unit
[22:00:13] Core required: FahCore_11.exe
[22:00:13] Core found.
[22:00:13] Working on queue slot 04 [October 7 22:00:13 UTC]
[22:00:13] + Working ...
[22:00:13] 
[22:00:13] *------------------------------*
[22:00:13] Folding@Home GPU Core
[22:00:13] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:00:13] 
[22:00:13] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:00:13] Build host: amoeba
[22:00:13] Board Type: Nvidia
[22:00:13] Core      : 
[22:00:13] Preparing to commence simulation
[22:00:13] - Looking at optimizations...
[22:00:13] DeleteFrameFiles: successfully deleted file=work/wudata_04.ckp
[22:00:13] - Created dyn
[22:00:13] - Files status OK
[22:00:13] - Expanded 46718 -> 252912 (decompressed 541.3 percent)
[22:00:13] Called DecompressByteArray: compressed_data_size=46718 data_size=252912, decompressed_data_size=252912 diff=0
[22:00:13] - Digital signature verified
[22:00:13] 
[22:00:13] Project: 5766 (Run 13, Clone 367, Gen 300)
[22:00:13] 
[22:00:13] Assembly optimizations on if available.
[22:00:13] Entering M.D.
[22:00:20] Tpr hash work/wudata_04.tpr:  1754752174 43647761 3008249873 771149795 1937887240
[22:00:20] 
[22:00:20] Calling fah_main args: 14 usage=100
[22:00:20] 
[22:00:20] Working on Protein
[22:00:21] Client config found, loading data.
[22:00:21] Starting GUI Server
[22:00:21] mdrun_gpu returned 
[22:00:21] NANs detected on GPU
[22:00:21] 
[22:00:21] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:00:26] CoreStatus = 7A (122)
[22:00:26] Sending work to server
[22:00:26] Project: 5766 (Run 13, Clone 367, Gen 300)
[22:00:26] - Read packet limit of 540015616... Set to 524286976.
[22:00:26] - Error: Could not get length of results file work/wuresults_04.dat
[22:00:26] - Error: Could not read unit 04 file. Removing from queue.
[22:00:26] - Preparing to get new work unit...
[22:00:26] Cleaning up work directory
[22:00:26] + Attempting to get work packet
[22:00:26] Gpu type=2 species=30.
[22:00:26] - Connecting to assignment server
[22:00:27] - Successful: assigned to (171.67.108.11).
[22:00:27] + News From Folding@Home: Welcome to Folding@Home
[22:00:27] Loaded queue successfully.
[22:00:27] Gpu type=2 species=30.
[22:00:28] + Closed connections
[22:00:33] 
[22:00:33] + Processing work unit
[22:00:33] Core required: FahCore_11.exe
[22:00:33] Core found.
[22:00:33] Working on queue slot 05 [October 7 22:00:33 UTC]
[22:00:33] + Working ...
[22:00:34] 
[22:00:34] *------------------------------*
[22:00:34] Folding@Home GPU Core
[22:00:34] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:00:34] 
[22:00:34] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:00:34] Build host: amoeba
[22:00:34] Board Type: Nvidia
[22:00:34] Core      : 
[22:00:34] Preparing to commence simulation
[22:00:34] - Looking at optimizations...
[22:00:34] DeleteFrameFiles: successfully deleted file=work/wudata_05.ckp
[22:00:34] - Created dyn
[22:00:34] - Files status OK
[22:00:34] - Expanded 46718 -> 252912 (decompressed 541.3 percent)
[22:00:34] Called DecompressByteArray: compressed_data_size=46718 data_size=252912, decompressed_data_size=252912 diff=0
[22:00:34] - Digital signature verified
[22:00:34] 
[22:00:34] Project: 5766 (Run 13, Clone 367, Gen 300)
[22:00:34] 
[22:00:34] Assembly optimizations on if available.
[22:00:34] Entering M.D.
[22:00:40] Tpr hash work/wudata_05.tpr:  1754752174 43647761 3008249873 771149795 1937887240
[22:00:40] 
[22:00:40] Calling fah_main args: 14 usage=100
[22:00:40] 
[22:00:40] Working on Protein
[22:00:41] Client config found, loading data.
[22:00:41] mdrun_gpu returned 
[22:00:41] NANs detected on GPU
[22:00:41] 
[22:00:41] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:00:46] CoreStatus = 7A (122)
[22:00:46] Sending work to server
[22:00:46] Project: 5766 (Run 13, Clone 367, Gen 300)
[22:00:46] - Read packet limit of 540015616... Set to 524286976.
[22:00:46] - Error: Could not get length of results file work/wuresults_05.dat
[22:00:46] - Error: Could not read unit 05 file. Removing from queue.
[22:00:46] EUE limit exceeded. Pausing 24 hours.
[00:21:09] + Working...
[06:21:09] + Working...
IMHO it's a problem with these three specific WU's not the GFX card. Or do these WU's require more memory on the GFX card than 512 MB?
I'm not sure if it helps but here is the GPU-Z screenshot of my gfx card:

Image

Do you have any further suggestions?
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Seriously PG, WU's 5765-5767!!!

Post by sortofageek »

Project: 5767 (Run 14, Clone 99, Gen 445)
Successfully completed by two other folders.


Project: 5766 (Run 13, Clone 367, Gen 300)
No data back from query
Fahrenheit451
Posts: 90
Joined: Sun Sep 19, 2010 9:25 am
Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz

System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB
Location: Bonn, Germany

Re: Seriously PG, WU's 5765-5767!!!

Post by Fahrenheit451 »

I have no doubt that others can complete this project, but my PC don't do it since I started to run F@H (see my posts above).

What do you mean with "no data back from query"?

These three projects are the only which doesn't work on my PC. Each other WU including the big and beta WU' works fine. Do they have special requirements to GPU and memory?
Mr. Scary
Posts: 35
Joined: Fri Jul 04, 2008 7:13 pm
Hardware configuration: The Rock-XPS630i/QX6850@3.67ghz/OCZ Plat 1066 2x2gb/(2)8800GT AlphaDogs/(2)10krpm Raptors Raid0&(2)WD HDD 500gb
Nekid-CoolerMaster CM690/MSI-P6N Diamond/Q6600@3.0ghz/Samsung 2x2gb 800mhz/(2)9800GT's/TX2 HSF/Corsair TX850W PSU/(2)WD 160gb HDD's Raid 0, (1)500gb WD & (1)1.5tb WD HDD
Bare Nekid-MSI-P6N Diamond/E7200@3.2ghz/OCZ ReaperX1000mhz 2x2gb/(2)8800GT's/Corsair TX750W PSU/160gb WD HDD
Buck Nekid-Xion XON-303/Dell'd 650iMobo/Q6600@3.15ghz/Naya 4x1gb 667mhz/(2)8800GT's SLI/750W PSU/320gb WD HDD

Re: Seriously PG, WU's 5765-5767!!!

Post by Mr. Scary »

wastin' yer time fahrenheit. sorry bro! feel yer pain.

M$
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Seriously PG, WU's 5765-5767!!!

Post by sortofageek »

Fahrenheit451 wrote:I have no doubt that others can complete this project, but my PC don't do it since I started to run F@H (see my posts above).

What do you mean with "no data back from query"?

These three projects are the only which doesn't work on my PC. Each other WU including the big and beta WU' works fine. Do they have special requirements to GPU and memory?
"No data back from query" means I checked for results for this WU and there is no information in the database about it.

My apologies if my response somehow caused irritation. When someone posts about a problem with a WU in this forum, I check the database and let the poster know what I found in relation to that WU. I'm not drawing any conclusions here, just reporting on info in the database. :)
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Seriously PG, WU's 5765-5767!!!

Post by bruce »

Fahrenheit451 wrote:I have no doubt that others can complete this project, but my PC don't do it since I started to run F@H (see my posts above).
Though sortofageek isn't drawing any conclusions, I do have a question: Why is your computer different than the other person's? We don't have any way to answer that question without a lot of guesswork and a lot of information from you.

Science is served since somebody did complete the WU successfully and you wasted some processing time. If something like this happens once, we can all agree to ignore it. If it happens frequently, we should try to identify a problem.
Mr. Scary
Posts: 35
Joined: Fri Jul 04, 2008 7:13 pm
Hardware configuration: The Rock-XPS630i/QX6850@3.67ghz/OCZ Plat 1066 2x2gb/(2)8800GT AlphaDogs/(2)10krpm Raptors Raid0&(2)WD HDD 500gb
Nekid-CoolerMaster CM690/MSI-P6N Diamond/Q6600@3.0ghz/Samsung 2x2gb 800mhz/(2)9800GT's/TX2 HSF/Corsair TX850W PSU/(2)WD 160gb HDD's Raid 0, (1)500gb WD & (1)1.5tb WD HDD
Bare Nekid-MSI-P6N Diamond/E7200@3.2ghz/OCZ ReaperX1000mhz 2x2gb/(2)8800GT's/Corsair TX750W PSU/160gb WD HDD
Buck Nekid-Xion XON-303/Dell'd 650iMobo/Q6600@3.15ghz/Naya 4x1gb 667mhz/(2)8800GT's SLI/750W PSU/320gb WD HDD

Re: Seriously PG, WU's 5765-5767!!!

Post by Mr. Scary »

well said bruce! so i guess the question is what's the definition of, ummmm, "frequently"??? Is that number of people having the prob, or, number of probs the 'people' are having? hmmmmmmmm.

M$
Fahrenheit451
Posts: 90
Joined: Sun Sep 19, 2010 9:25 am
Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz

System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB
Location: Bonn, Germany

Re: Seriously PG, WU's 5765-5767!!!

Post by Fahrenheit451 »

@sortofageek: thx for clarify the term and informing the responsible project manager.

@bruce: please let me know what other kind of information you need. imho i posted all relevant information of my PC in my former posts. I would say that my computer is different to the other person's computer (i assume u mean Mr. Scary) because we are different persons.

For the time being I will need to restart my GPU client everytime I get one of these three projects until they find a solution.

Please excuse any mistakes in my English. It's not my native languange.
Fahrenheit451
Posts: 90
Joined: Sun Sep 19, 2010 9:25 am
Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz

System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB
Location: Bonn, Germany

Project: 5765 (Run 2, Clone 389, Gen 787)

Post by Fahrenheit451 »

next failed project:

[22:54:30] Project: 5765 (Run 2, Clone 389, Gen 787)

Code: Select all

--- Opening Log file [October 8 22:53:31 UTC] 


# Windows GPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30r2

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\USER NAME\AppData\Roaming\Folding@home-gpu
Arguments: -advmethods 

[22:53:31] - Ask before connecting: No
[22:53:31] - User name: 
[22:53:31] - User ID: 
[22:53:31] - Machine ID: 2
[22:53:31] 
[22:53:31] Gpu type=2 species=30.
[22:53:31] Loaded queue successfully.
[22:53:31] Initialization complete
[22:53:31] - Preparing to get new work unit...
[22:53:31] Cleaning up work directory
[22:53:32] + Attempting to get work packet
[22:53:32] Gpu type=2 species=30.
[22:53:32] - Connecting to assignment server
[22:53:33] - Successful: assigned to (171.67.108.11).
[22:53:33] + News From Folding@Home: Welcome to Folding@Home
[22:53:33] Loaded queue successfully.
[22:53:33] Gpu type=2 species=30.
[22:53:35] + Closed connections
[22:53:35] 
[22:53:35] + Processing work unit
[22:53:35] Core required: FahCore_11.exe
[22:53:35] Core found.
[22:53:35] Working on queue slot 06 [October 8 22:53:35 UTC]
[22:53:35] + Working ...
[22:53:35] 
[22:53:35] *------------------------------*
[22:53:35] Folding@Home GPU Core
[22:53:35] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:53:35] 
[22:53:35] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:53:35] Build host: amoeba
[22:53:35] Board Type: Nvidia
[22:53:35] Core      : 
[22:53:35] Preparing to commence simulation
[22:53:35] - Looking at optimizations...
[22:53:35] DeleteFrameFiles: successfully deleted file=work/wudata_06.ckp
[22:53:35] - Created dyn
[22:53:35] - Files status OK
[22:53:35] - Expanded 46645 -> 252912 (decompressed 542.2 percent)
[22:53:35] Called DecompressByteArray: compressed_data_size=46645 data_size=252912, decompressed_data_size=252912 diff=0
[22:53:35] - Digital signature verified
[22:53:35] 
[22:53:35] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:53:35] 
[22:53:35] Assembly optimizations on if available.
[22:53:35] Entering M.D.
[22:53:41] Tpr hash work/wudata_06.tpr:  764097178 823819626 2859163980 837046043 861489528
[22:53:41] 
[22:53:41] Calling fah_main args: 14 usage=100
[22:53:41] 
[22:53:41] Working on Protein
[22:53:42] Client config found, loading data.
[22:53:42] Starting GUI Server
[22:53:42] mdrun_gpu returned 
[22:53:42] NANs detected on GPU
[22:53:42] 
[22:53:42] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:53:45] CoreStatus = 7A (122)
[22:53:45] Sending work to server
[22:53:45] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:53:45] - Read packet limit of 540015616... Set to 524286976.
[22:53:45] - Error: Could not get length of results file work/wuresults_06.dat
[22:53:45] - Error: Could not read unit 06 file. Removing from queue.
[22:53:45] - Preparing to get new work unit...
[22:53:45] Cleaning up work directory
[22:53:45] + Attempting to get work packet
[22:53:45] Gpu type=2 species=30.
[22:53:45] - Connecting to assignment server
[22:53:46] - Successful: assigned to (171.67.108.11).
[22:53:46] + News From Folding@Home: Welcome to Folding@Home
[22:53:47] Loaded queue successfully.
[22:53:47] Gpu type=2 species=30.
[22:53:48] + Closed connections
[22:53:53] 
[22:53:53] + Processing work unit
[22:53:53] Core required: FahCore_11.exe
[22:53:53] Core found.
[22:53:53] Working on queue slot 07 [October 8 22:53:53 UTC]
[22:53:53] + Working ...
[22:53:53] 
[22:53:53] *------------------------------*
[22:53:53] Folding@Home GPU Core
[22:53:53] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:53:53] 
[22:53:53] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:53:53] Build host: amoeba
[22:53:53] Board Type: Nvidia
[22:53:53] Core      : 
[22:53:53] Preparing to commence simulation
[22:53:53] - Looking at optimizations...
[22:53:53] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[22:53:53] - Created dyn
[22:53:53] - Files status OK
[22:53:53] - Expanded 46645 -> 252912 (decompressed 542.2 percent)
[22:53:53] Called DecompressByteArray: compressed_data_size=46645 data_size=252912, decompressed_data_size=252912 diff=0
[22:53:53] - Digital signature verified
[22:53:53] 
[22:53:53] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:53:53] 
[22:53:53] Assembly optimizations on if available.
[22:53:53] Entering M.D.
[22:54:00] Tpr hash work/wudata_07.tpr:  764097178 823819626 2859163980 837046043 861489528
[22:54:00] 
[22:54:00] Calling fah_main args: 14 usage=100
[22:54:00] 
[22:54:00] Working on Protein
[22:54:01] Client config found, loading data.
[22:54:01] mdrun_gpu returned 
[22:54:01] NANs detected on GPU
[22:54:01] 
[22:54:01] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:54:04] CoreStatus = 7A (122)
[22:54:04] Sending work to server
[22:54:04] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:04] - Read packet limit of 540015616... Set to 524286976.
[22:54:04] - Error: Could not get length of results file work/wuresults_07.dat
[22:54:04] - Error: Could not read unit 07 file. Removing from queue.
[22:54:04] - Preparing to get new work unit...
[22:54:04] Cleaning up work directory
[22:54:04] + Attempting to get work packet
[22:54:04] Gpu type=2 species=30.
[22:54:04] - Connecting to assignment server
[22:54:05] - Successful: assigned to (171.67.108.11).
[22:54:05] + News From Folding@Home: Welcome to Folding@Home
[22:54:05] Loaded queue successfully.
[22:54:05] Gpu type=2 species=30.
[22:54:07] + Closed connections
[22:54:12] 
[22:54:12] + Processing work unit
[22:54:12] Core required: FahCore_11.exe
[22:54:12] Core found.
[22:54:12] Working on queue slot 08 [October 8 22:54:12 UTC]
[22:54:12] + Working ...
[22:54:12] 
[22:54:12] *------------------------------*
[22:54:12] Folding@Home GPU Core
[22:54:12] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:54:12] 
[22:54:12] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:54:12] Build host: amoeba
[22:54:12] Board Type: Nvidia
[22:54:12] Core      : 
[22:54:12] Preparing to commence simulation
[22:54:12] - Looking at optimizations...
[22:54:12] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[22:54:12] - Created dyn
[22:54:12] - Files status OK
[22:54:12] - Expanded 46645 -> 252912 (decompressed 542.2 percent)
[22:54:12] Called DecompressByteArray: compressed_data_size=46645 data_size=252912, decompressed_data_size=252912 diff=0
[22:54:12] - Digital signature verified
[22:54:12] 
[22:54:12] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:12] 
[22:54:12] Assembly optimizations on if available.
[22:54:12] Entering M.D.
[22:54:18] Tpr hash work/wudata_08.tpr:  764097178 823819626 2859163980 837046043 861489528
[22:54:18] 
[22:54:18] Calling fah_main args: 14 usage=100
[22:54:18] 
[22:54:18] Working on Protein
[22:54:19] Client config found, loading data.
[22:54:19] mdrun_gpu returned 
[22:54:19] NANs detected on GPU
[22:54:19] 
[22:54:19] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:54:22] CoreStatus = 7A (122)
[22:54:22] Sending work to server
[22:54:22] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:22] - Read packet limit of 540015616... Set to 524286976.
[22:54:22] - Error: Could not get length of results file work/wuresults_08.dat
[22:54:22] - Error: Could not read unit 08 file. Removing from queue.
[22:54:22] - Preparing to get new work unit...
[22:54:22] Cleaning up work directory
[22:54:22] + Attempting to get work packet
[22:54:22] Gpu type=2 species=30.
[22:54:22] - Connecting to assignment server
[22:54:23] - Successful: assigned to (171.67.108.11).
[22:54:23] + News From Folding@Home: Welcome to Folding@Home
[22:54:23] Loaded queue successfully.
[22:54:23] Gpu type=2 species=30.
[22:54:25] + Closed connections
[22:54:30] 
[22:54:30] + Processing work unit
[22:54:30] Core required: FahCore_11.exe
[22:54:30] Core found.
[22:54:30] Working on queue slot 09 [October 8 22:54:30 UTC]
[22:54:30] + Working ...
[22:54:30] 
[22:54:30] *------------------------------*
[22:54:30] Folding@Home GPU Core
[22:54:30] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:54:30] 
[22:54:30] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:54:30] Build host: amoeba
[22:54:30] Board Type: Nvidia
[22:54:30] Core      : 
[22:54:30] Preparing to commence simulation
[22:54:30] - Looking at optimizations...
[22:54:30] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[22:54:30] - Created dyn
[22:54:30] - Files status OK
[22:54:30] - Expanded 46645 -> 252912 (decompressed 542.2 percent)
[22:54:30] Called DecompressByteArray: compressed_data_size=46645 data_size=252912, decompressed_data_size=252912 diff=0
[22:54:30] - Digital signature verified
[22:54:30] 
[22:54:30] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:30] 
[22:54:30] Assembly optimizations on if available.
[22:54:30] Entering M.D.
[22:54:36] Tpr hash work/wudata_09.tpr:  764097178 823819626 2859163980 837046043 861489528
[22:54:36] 
[22:54:36] Calling fah_main args: 14 usage=100
[22:54:36] 
[22:54:36] Working on Protein
[22:54:37] Client config found, loading data.
[22:54:37] mdrun_gpu returned 
[22:54:37] NANs detected on GPU
[22:54:37] 
[22:54:37] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:54:41] CoreStatus = 7A (122)
[22:54:41] Sending work to server
[22:54:41] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:41] - Read packet limit of 540015616... Set to 524286976.
[22:54:41] - Error: Could not get length of results file work/wuresults_09.dat
[22:54:41] - Error: Could not read unit 09 file. Removing from queue.
[22:54:41] - Preparing to get new work unit...
[22:54:41] Cleaning up work directory
[22:54:41] + Attempting to get work packet
[22:54:41] Gpu type=2 species=30.
[22:54:41] - Connecting to assignment server
[22:54:41] - Successful: assigned to (171.67.108.11).
[22:54:41] + News From Folding@Home: Welcome to Folding@Home
[22:54:42] Loaded queue successfully.
[22:54:42] Gpu type=2 species=30.
[22:54:43] + Closed connections
[22:54:48] 
[22:54:48] + Processing work unit
[22:54:48] Core required: FahCore_11.exe
[22:54:48] Core found.
[22:54:48] Working on queue slot 00 [October 8 22:54:48 UTC]
[22:54:48] + Working ...
[22:54:48] 
[22:54:48] *------------------------------*
[22:54:48] Folding@Home GPU Core
[22:54:48] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[22:54:48] 
[22:54:48] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[22:54:48] Build host: amoeba
[22:54:48] Board Type: Nvidia
[22:54:48] Core      : 
[22:54:48] Preparing to commence simulation
[22:54:48] - Looking at optimizations...
[22:54:48] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[22:54:48] - Created dyn
[22:54:48] - Files status OK
[22:54:48] - Expanded 46645 -> 252912 (decompressed 542.2 percent)
[22:54:48] Called DecompressByteArray: compressed_data_size=46645 data_size=252912, decompressed_data_size=252912 diff=0
[22:54:48] - Digital signature verified
[22:54:48] 
[22:54:48] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:48] 
[22:54:48] Assembly optimizations on if available.
[22:54:48] Entering M.D.
[22:54:55] Tpr hash work/wudata_00.tpr:  764097178 823819626 2859163980 837046043 861489528
[22:54:55] 
[22:54:55] Calling fah_main args: 14 usage=100
[22:54:55] 
[22:54:55] Working on Protein
[22:54:56] Client config found, loading data.
[22:54:56] mdrun_gpu returned 
[22:54:56] NANs detected on GPU
[22:54:56] 
[22:54:56] Folding@home Core Shutdown: UNSTABLE_MACHINE
[22:54:59] CoreStatus = 7A (122)
[22:54:59] Sending work to server
[22:54:59] Project: 5765 (Run 2, Clone 389, Gen 787)
[22:54:59] - Read packet limit of 540015616... Set to 524286976.
[22:54:59] - Error: Could not get length of results file work/wuresults_00.dat
[22:54:59] - Error: Could not read unit 00 file. Removing from queue.
[22:54:59] EUE limit exceeded. Pausing 24 hours.
sortofageek
Site Admin
Posts: 3110
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Project: 5765 (Run 2, Clone 389, Gen 787)

Post by sortofageek »

Project: 5765 (Run 2, Clone 389, Gen 787)

This WU has been completed successfully and received full credit.
Post Reply