129.74.85.15 - can't send or receive WU

Moderators: Site Moderators, FAHC Science Team

Post Reply
geneabug
Posts: 5
Joined: Sat Mar 07, 2009 10:46 am

129.74.85.15 - can't send or receive WU

Post by geneabug »

For the past 4 days, I haven't been able to submit the WU I completed, nor can I download a new one. I'm including a portion of the log below:

Code: Select all

[14:07:29] Loaded queue successfully.
[14:07:29] Deleting incompletely fetched item (4) from queue position #8
[14:07:29] Initialization complete
[14:07:29] - Preparing to get new work unit...
[14:07:29] Project: 10016 (Run 2783, Clone 0, Gen 20)


[14:07:29] + Attempting to send results [August 24 14:07:29 UTC]
[14:07:29] + Attempting to get work packet
[14:07:29] - Connecting to assignment server
[14:07:50] - Couldn't send HTTP request to server
[14:07:50] + Could not connect to Assignment Server
[14:07:50] - Couldn't send HTTP request to server
[14:07:50] + Could not connect to Work Server (results)
[14:07:50]     (129.74.85.15:8080)
[14:07:50] + Retrying using alternative port
[14:07:51] + No appropriate work server was available; will try again in a bit.
[14:07:51] + Couldn't get work instructions.
[14:07:51] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[14:07:59] - Couldn't send HTTP request to server
[14:07:59] + Could not connect to Work Server (results)
[14:07:59]     (129.74.85.15:80)
[14:07:59] - Error: Could not transmit unit 07 (completed August 20) to work server.


[14:07:59] + Attempting to send results [August 24 14:07:59 UTC]
[14:08:11] + Attempting to get work packet
[14:08:11] - Connecting to assignment server
[14:08:20] - Couldn't send HTTP request to server
[14:08:20] + Could not connect to Work Server (results)
[14:08:20]     (129.74.85.16:8080)
[14:08:20] + Retrying using alternative port
[14:08:29] - Couldn't send HTTP request to server
[14:08:29] + Could not connect to Work Server (results)
[14:08:29]     (129.74.85.16:80)
[14:08:29]   Could not transmit unit 07 to Collection server; keeping in queue.
[14:08:32] - Couldn't send HTTP request to server
[14:08:32] + Could not connect to Assignment Server
[14:08:32] + No appropriate work server was available; will try again in a bit.
[14:08:32] + Couldn't get work instructions.
[14:08:32] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[14:08:43] + Attempting to get work packet
[14:08:43] - Connecting to assignment server
[14:09:05] - Couldn't send HTTP request to server
[14:09:05] + Could not connect to Assignment Server
[14:09:05] + No appropriate work server was available; will try again in a bit.
[14:09:05] + Couldn't get work instructions.
[14:09:05] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Slot 07 *Done     
Project: 10016 (Run 2783, Clone 0, Gen 20), Core: b4
Work server: 129.74.85.15:8080
Collection server: 129.74.85.16
Download date: August 16 04:31:02
Finished date: August 20 11:40:36
Failed uploads: 18

PF: 0.852169 based on last 4 slot(s)
[14:21:24] + Attempting to get work packet
[14:21:24] - Connecting to assignment server
[14:21:45] - Couldn't send HTTP request to server
[14:21:45] + Could not connect to Assignment Server
[14:21:46] + No appropriate work server was available; will try again in a bit.
[14:21:46] + Couldn't get work instructions.
[14:21:46] - Attempt #8  to get work failed, and no other work to do.
Waiting before retry.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

[17:14:32] + Attempting to get work packet
[17:14:32] - Connecting to assignment server
[17:14:53] - Couldn't send HTTP request to server
[17:14:53] + Could not connect to Assignment Server
[17:14:53] + No appropriate work server was available; will try again in a bit.
[17:14:53] + Couldn't get work instructions.
[17:14:53] - Attempt #13  to get work failed, and no other work to do.
Waiting before retry.
[18:02:59] + Attempting to get work packet
[18:02:59] - Connecting to assignment server
[18:03:20] - Couldn't send HTTP request to server
[18:03:20] + Could not connect to Assignment Server
[18:03:21] + No appropriate work server was available; will try again in a bit.
[18:03:21] + Couldn't get work instructions.
[18:03:21] - Attempt #14  to get work failed, and no other work to do.
Waiting before retry.
[18:51:34] + Attempting to get work packet
[18:51:34] - Connecting to assignment server
[18:51:55] - Couldn't send HTTP request to server
[18:51:55] + Could not connect to Assignment Server
[18:51:56] + No appropriate work server was available; will try again in a bit.
[18:51:56] + Couldn't get work instructions.
[18:51:56] - Attempt #15  to get work failed, and no other work to do.
Waiting before retry.
I don't think my firewall is blocking the server. (I had that problem earlier.) Any ideas as to what could be causing the problem?
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 129.74.85.15 - can't send or receive WU

Post by 7im »

How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
geneabug
Posts: 5
Joined: Sat Mar 07, 2009 10:46 am

Re: 129.74.85.15 - can't send or receive WU

Post by geneabug »

I'm using the system tray version, so that's never come up.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 129.74.85.15 - can't send or receive WU

Post by 7im »

Click on them. ;)

When your web browser application opens, does it then display a blank white page with "OK" in the top left corner or something else?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
geneabug
Posts: 5
Joined: Sat Mar 07, 2009 10:46 am

Re: 129.74.85.15 - can't send or receive WU

Post by geneabug »

I'm sorry, I thought you were talking about a screen within the program. I haven't been getting much sleep lately, so I just wasn't thinking clearly.

Anyway, I only got the OK screen at 171.64.65.121. 129.74.85.15 and 129.74.85.16 came back with a completely blank white screen. The other 2 simply time out.
bruce
Posts: 20824
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: 129.74.85.15 - can't send or receive WU

Post by bruce »

From here, both http://129.74.85.15:8080/ and http://129.74.85.16:8080/ get the "OK" message, so I believe that it's possible to upload/download to those servers -- but you'll need to be sure that your firewall doesn't block port 8080.

Both http://129.74.85.15/ and http://129.74.85.16/ fail from here, so apparently the default http port 80 doesn't work on those servers at this time.

How about http://assign.stanford.edu:8080/ and http://assign2.stanford.edu/? Both work from here, but if it's your firewall, the first one will fail and the second one will succeed. If my assumptions are correct, your client should be redirected to some other sever for downloads, though I can't explain how you got those WUs in the first place or how you're going to return them without opening port 8080 in your firewall.
geneabug
Posts: 5
Joined: Sat Mar 07, 2009 10:46 am

Re: 129.74.85.15 - can't send or receive WU

Post by geneabug »

I tried both of those links and got the "OK" message from both. So then I tried both http://129.74.85.15:8080 and http://129.74.85.16:8080 again, and they came back "OK" as well. At least that's when I had my laptop at the local library. But when I'm at my apartment, port 8080 clonks out. So I'm wondering if there's a problem with my internet connection. At least my client eventually managed to receive a WU from 129.74.85.15:8080 before I left the library; otherwise, I'd probably still be in the same boat. However, it still couldn't send the WU it had already finished. Any thoughts?
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 129.74.85.15 - can't send or receive WU

Post by 7im »

As you suspected in your original post, it looks like you have some kind of AV or FW software/hardware blocking ports.

And getting WUs from a work server on port 8080 at the library obviously won't upload very easily from home if home is blocking port 8080. ;)
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
geneabug
Posts: 5
Joined: Sat Mar 07, 2009 10:46 am

Re: 129.74.85.15 - can't send or receive WU

Post by geneabug »

I finally figured out what the problem was: it was my router's firewall that was blocking the port. Once my brother got that straightened out, my client's back up and running again. :D
lanbrown
Posts: 104
Joined: Thu Jul 09, 2009 1:21 am

Re: 129.74.85.15 - can't send or receive WU

Post by lanbrown »

Now the server cannot be contacted at all. The server status page just shows no response. So the server has either crashed or has died. Can someone check to see if it needs to be on life support or not?
http://fah-web.stanford.edu/logs/129.74.85.15.log.html
DrSpalding
Posts: 136
Joined: Wed May 27, 2009 4:48 pm
Hardware configuration: Dell Studio 425 MTS-Core i7-920 c0 stock
evga SLI 3x o/c Core i7-920 d0 @ 3.9GHz + nVidia GTX275
Dell 5150 + nVidia 9800GT

Re: 129.74.85.15 - can't send or receive WU

Post by DrSpalding »

I am seeing no luck in uploading to 129.74.85.15:8080 since yesterday around 13:20 PDT. http://129.74.85.15/ and http://129.74.85.15:8080/ both are non-responsive and time out. It also has tried 129.74.85.16:80 and 129.74.85.16:8080 with the safe results. From rDNS, these two servers appear to have the names:
fahnd03.crc.nd.edu and fahnd04.crc.nd.edu and are at the University of Notre Dame.
Not a real doctor, I just play one on the 'net!
Image
PeterA
Posts: 59
Joined: Mon Dec 03, 2007 2:28 am
Hardware configuration: PC: AMD Sempron(tm) Processor 2800+, 1024 MB RAM, Microsoft Windows XP (Home Edition) SP3
Laptop: Mobile AMD Sempron(tm) Processor 3500+, 896 MB RAM, Microsoft Windows Vista (Home Premium)
Location: Blaine, MN

Re: 129.74.85.15 - can't send or receive WU

Post by PeterA »

I'm having the same problem. Server status page has it down since 6:50AM PDT Sat. Someone needs to give it a kick. ;)

Collection server not having any luck either. :(

Code: Select all

[18:35:34] Project: 10022 (Run 1323, Clone 0, Gen 18)
...
[18:35:59] - Couldn't send HTTP request to server
[18:35:59] + Could not connect to Work Server (results)
[18:35:59]     (129.74.85.15:8080)
[18:35:59] + Retrying using alternative port
[18:36:24] - Couldn't send HTTP request to server
[18:36:24] + Could not connect to Work Server (results)
[18:36:24]     (129.74.85.15:80)
[18:36:24] - Error: Could not transmit unit 02 (completed September 4) to work server.
[18:36:24] - Read packet limit of 540015616... Set to 524286976.


[18:36:24] + Attempting to send results [September 5 18:36:24 UTC]
[18:36:35] + Running on battery power. Pausing work until computer is plugged in.
[18:38:03] - Couldn't send HTTP request to server
[18:38:03] + Could not connect to Work Server (results)
[18:38:03]     (129.74.85.16:8080)
[18:38:03] + Retrying using alternative port
[18:38:16] - Couldn't send HTTP request to server
[18:38:16] + Could not connect to Work Server (results)
[18:38:16]     (129.74.85.16:80)
[18:38:16]   Could not transmit unit 02 to Collection server; keeping in queue.
7im
Posts: 10179
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 129.74.85.15 - can't send or receive WU

Post by 7im »

I asked the researcher responsible for these servers to look in to it (as note in the 129.74.85.16 thread ). Being a holiday weekend, it could take a while.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
DrSpalding
Posts: 136
Joined: Wed May 27, 2009 4:48 pm
Hardware configuration: Dell Studio 425 MTS-Core i7-920 c0 stock
evga SLI 3x o/c Core i7-920 d0 @ 3.9GHz + nVidia GTX275
Dell 5150 + nVidia 9800GT

Re: 129.74.85.15 - can't send or receive WU

Post by DrSpalding »

It appears that the 129.74.85.15 server is back up. The machine successfully uploaded at 00:04 UTC on 6 Sept. That is 17:04 PDT on 5 Sept.
Not a real doctor, I just play one on the 'net!
Image
Post Reply